标准号 |
中文名称 |
英文名称 |
BS EN 61249-2-7-2002 |
互连结构材料.包被和非包被的加强基质材料的分规范.阻燃环氧衍生物叠层板材.铜包被 |
(Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning) |
BS EN 61249-2-8-2003 |
互连结构用材料.包被和非包被增强基材分规范.包被和非包被增强基材.规定了易燃性的包铜改良溴化环氧编织玻 |
() |
BS EN 61249-2-9-2003 |
互连结构用材料.包被和非包被增强基材分规范.包被和非包被增强基材.规定了易燃性的包铜二顺丁烯二酰亚胺/三 |
() |
BS EN 61249-3-3-1999 |
互联结构材料.包被和非包被的非加强基质材料的分规范(用于柔软印制板的).粘胶包被的柔软聚酯膜 |
(Materials for interconnection structures - Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film) |
BS EN 61249-3-4-1999 |
互联结构材料.包被和非包被的非加强基质材料的分规范(用于柔软印制板的).粘胶包被的柔软聚酰亚胺膜 |
(Materials for interconnection structures - Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyimide film) |
BS EN 61249-3-5-1999 |
连接结构用材料.增强的涂覆和未涂覆材料分规范组.挠性印制板用传热粘附膜 |
(Materials for interconnection structures - Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Transfer adhesive films for flexible pr) |
BS EN 61249-5-1-1996 |
连接结构用材料.第5部分:带和不带涂层的导电箔和薄膜的分规范.第1节:铜箔(用于生产铜涂覆基材) |
(Materials for interconnection structures - Sectional specification set for conductive foils and films with and without coatings - Copper foils (for the manufacture of copper-clad base materials)) |
BS EN 61249-5-4-1997 |
内部连接结构用材料.有或无涂层的导电箔和导电薄膜分规范.导电墨水 |
(Materials for interconnection structures - Sectional specification set for conductive foils and films with and without coatings - Conductive inks) |
BS EN 61249-7-1-1996 |
互连接装置用材料.第7部分:芯约束用材料分规范.第1节:铜/殷钢/铜 |
(Materials for interconnection structures - Sectional specification set for restraining core materials - Copper/invar/copper) |
BS EN 61249-8-7-1997 |
互连接结构用材料.非导电薄膜和涂层分规范.打印油墨 |
(Materials for interconnection structures - Sectional specification set for non-conductive films and coatings - Marking legend inks) |
BS EN 61249-8-8-1997 |
连接结构用材料.非导电膜和涂层部分规范.临时聚合物规范 |
(Materials for interconnection structures - Sectional specification set for non-conductive films and coatings - Temporary polymer coatings) |
BS EN 61254-1994 |
家用电动剃须刀.性能测量方法 |
(Electric shavers for household use - Methods for measuring the performance) |
BS EN 61255-1995 |
家用电热毯.性能测量方法 |
(Household electric heating pads - Methods for measuring performance) |
BS EN 61260-1996 |
电声学.分倍频程频带和频程频带用倍频滤波器 |
(Electroacoustics - Octave-band and fractional-octave-band filters) |
BS EN 61262-1-1995 |
医疗电气设备.电光X射线图象增强器的特性.第1部分:入口尺寸的测定 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the entrance field size) |
BS EN 61262-2-1995 |
医疗电气设备用电光X射线图像增强器的特性.换算因子的测定 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the conversion factor) |
BS EN 61262-3-1995 |
医疗电气设备用电光X射线图像增强器的特性.亮度分布和不一致性的测定 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the luminance distribution and luminance non-uniformity) |
BS EN 61262-4-1995 |
医疗电气设备X射线图像增强仪的电光特性.图像失真的测定 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the image distortion) |
BS EN 61262-5-1995 |
电光X射线图象增强器的特性. |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the detective quantum efficiency) |
BS EN 61262-6-1995 |
医疗电气设备.电光X射线图象增强器的特性.第6部分:对比率和杂光指数的测定 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the contrast ratio and veiling glare index) |
BS EN 61262-7-1996 |
医疗电气设备.电光X射线图象增强器的特性.第7部分:调制变压器的函数 |
(Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment - Determination of the modulation transfer function) |
BS EN 61265-1995 |
电声学.航空噪声测量说明.运输机噪声检定测量三分之一带宽倍频声压级装置的性能要求 |
(Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-categ) |
BS EN 61266-1995 |
超声波.手持式传感式多普勒胎儿心跳探测仪.性能要求及测量和记录方法 |
(Ultrasonics - Hand-held probe Doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting) |
BS EN 61267-1995 |
医学诊断用X射线设备特性测定的辐射条件 |
(Radiation conditions for use in the determination of characteristics for medical diagnostic X-ray equipment) |
BS EN 61269-1-1-1997 |
光纤端件.空白详细规范 |
(Fibre optic terminus sets - Blank detail specification) |
BS EN 61269-1-1997 |
光纤端件.总规范 |
(Fibre optic terminus sets - Generic specification) |
BS EN 61270-1-1998 |
微波炉用电容器.总则 |
(Capacitors for microwave ovens - General) |
BS EN 61274-1-1-1997 |
光纤适配器.空白详细规范 |
(Fibre optic adaptors - Blank detail specification) |
BS EN 61274-1-1997 |
光纤适配器.常规规范 |
(Fibre optic adaptors - Generic specification) |
BS EN 61277-1998 |
地面光电功率发生装置.总则和指南 |
(Terrestial photovoltaic (PV) power generating systems - General and guide) |
BS EN 61280-1-1-1998 |
光纤放大器.基本光谱分析机.单模光纤电缆用发射机光输出功率的测量 |
(Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable) |
BS EN 61280-1-3-1999 |
光纤通信分系统基本试验程序.一般通信分系统的试验程序.中心波长和光谱宽度的测量 |
(Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Central wavelength and spectral width measurement) |
BS EN 61280-1-4-2003 |
光纤通信子系统基本试验规程.一般通信子系统的试验规程.多模纤维激光发射机用二维近场数据的采集和整理 |
(Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Collection and reduction of two-dimensional nearfield data for multimode fibre laser) |
BS EN 61280-2-1-1999 |
纤维光学通信系统基本试验程序.数字系统试验程序.接收机灵敏度和过载测量 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Receiver sensitivity and overload measurement) |
BS EN 61280-2-2-1999 |
光纤通信子系统基本试验程序.数字系统试验程序.光学直视模型、波形和衰减比率 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Optical eye pattern, waveform, and extinction ratio) |
BS EN 61280-2-2-2005 |
光纤通信子系统试验程序.数字系统.光眼图、波形和消光比测量 |
|
BS EN 61280-2-4-1998 |
纤维光学通信系统基本试验程序.数字系统试验程序.容许位速率测量 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Bit-rate tolerance measurement) |
BS EN 61280-2-5-1998 |
光纤通信子系统基本试验程序.数字系统试验程序.跳动传输功能测量 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Jitter transfer function measurement) |
BS EN 61280-2-8-2003 |
光纤通信子系统基本试验规程.数字系统的试验规程.用品质因数测量法测定低位错率 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Determination of low BER using Q-factor measurements) |
BS EN 61280-2-9-2003 |
纤维光学通信子系统基本试验程序.数字系统试验规程.密集波长分区多层系统用光学信噪比的测量 |
(Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems) |
BS EN 61280-4-1-2004 |
纤维光学通信子系统基本试验程序.光缆设施.多模光缆设施衰减测量 |
|
BS EN 61280-4-1-2004 |
纤维光学通信子系统试验程序.光缆设施和链路.多模光缆设施衰减测量 |
|
BS EN 61280-4-1-2004 |
纤维光学通信子系统试验程序.光缆设施和链路.多模光缆设施衰减测量 |
|
BS EN 61280-4-2-2000 |
光纤通信分系统基本试验程序.光纤电缆性能指标.单模光纤电缆性能指标的衰减 |
(Fibre optic communication subsystem basic test procedures - Fibre optic cable plant - Single-mode fibre optic cable plant attenuation) |
BS EN 61281-1-1999 |
光纤通信子系统.一般规范 |
(Fibre optic communication subsystems - Generic specification) |
BS EN 61284-1998 |
架空线.装配要求和试验 |
(Overhead lines - Requirements and tests for fittings) |
BS EN 61285-1995 |
工业过程控制.分析器罩的安全 |
(Industrial-process control - Safety of analyser houses) |
BS EN 61286-2002 |
信息技术.电工学中所用文献的准备和信息交换用的编码图形字符集 |
(Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange) |
BS EN 61290-1-1-1998 |
光谱分析仪 |
(Optical spectrum analyzer) |
BS EN 61290-1-2-1998 |
光纤放大器.基本规范.获得参数的试验方法.电气频谱分析仪 |
(Optical fibre amplifiers - Basic specification - Test methods for gain parameters - Electrical spectrum analyzer) |
BS EN 61290-1-3-1998 |
光纤放大器.基本光谱分析器.光强度计 |
(Optical fibre amplifiers.Basic spectrum analyzers - Optical power meter) |
BS EN 61290-10-1-2003 |
光学纤维放大器.基础规范.多道参数.使用光学开关和光谱分析仪的脉冲法 |
(Optical fibre amplifiers - Basic specification - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer) |
BS EN 61290-10-2-2003 |
光学纤维放大器.基础规范.多道参数.选通光频谱分析仪脉冲法 |
(Optical fibre amplifiers - Basic specification - Multichannel parameters - Pulse method using a gated optical spectrum analyzer) |
BS EN 61290-10-3-2003 |
光学纤维放大器.基础规范.多道参数.探测法 |
(Optical fibre amplifiers - Basic specification - Multichannel parameters - Probe methods) |
BS EN 61290-11-1-2003 |
光学放大器.基础规范.偏振模色散.琼斯矩阵特征分析法(JME) |
(Optical fibre amplifiers - Basic specification - Polarization mode dispersion - Jones matrix eigenanalysis method (JME)) |
BS EN 61290-11-2-2005 |
光学放大器.试验方法.偏振模式分散参数.Poincare球面分析方法 |
|
BS EN 61290-2-1-1998 |
光纤放大器.基本规范.光电参数的试验方法.光谱分析仪 |
(Optical fibre amplifiers - Basic specification - Test methods for optical power parameters - Optical spectrum analyzer) |
BS EN 61290-2-2-1998 |
光纤放大器.基本规范.光电参数的试验方法.电气频谱分析仪 |
(Optical fibre amplifiers - Basic specification - Test methods for optical power parameters - Electrical spectrum analyzer) |
BS EN 61290-2-3-1998 |
光纤放大器.基本规范.光电参数的试验方法.光电仪 |
(Optical fibre amplifiers - Basic specification - Test methods for optical power parameters - Optical power meter) |
BS EN 61290-3-1-2004 |
光学纤维放大器.基础规范.噪音数字参数的测试方法.光谱分析仪法 |
|
BS EN 61290-3-2-2003 |
光纤放大器.基础规范.噪音指数参数的试验方法.电频谱分析仪法 |
(Optical fibre amplifiers - Basic specification - Test methods for noise figure parameters - Electrical spectrum analyzer method) |
BS EN 61290-3-2000 |
光纤放大器.基本规范.噪音数字参数的试验方法 |
(Optical fibre amplifiers - Basic specification - Test methods for noise figure parameters) |
BS EN 61290-5-1-2000 |
光纤放大器.基本规范.反射系数的试验方法.光谱分析仪 |
(Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Optical spectrum analyser) |
BS EN 61290-5-2-2004 |
光纤放大器.基本规范.反射参数的试验方法.电频谱分析仪法 |
|
BS EN 61290-5-3-2002 |
光纤放大器的反射参数的试验方法.用电子学光谱分析仪测定反射偏差的基本规范 |
(Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser) |
BS EN 61290-6-1-1998 |
光纤放大器.基本规范.泵漏参数的试验方法.光信号分离器 |
(Optical fibre amplifiers - Basic specification - Test methods for pump leakage parameters - Optical demultiplexer) |
BS EN 61290-7-1-1998 |
光纤放大器.基本规范.谱带外插入损失的试验方法.滤光计 |
(Optical fibre amplifiers - Basic specification - Test methods for out-of-band insertion losses - Filtered optical power meter) |
BS EN 61291-1-1998 |
光纤放大器.通用规范 |
(Optical fibre amplifiers - Generic specification) |
BS EN 61291-2-2001 |
光纤放大器.数字应用.性能 |
(Optical fibre amplifiers - Digital applications - Performance specification template) |
BS EN 61291-4-2003 |
光学纤维放大器.多信道应用.性能规范模板 |
(Optical fibre amplifiers - Multichannel applications - Performance specification template) |
BS EN 61291-5-2-2003 |
光纤放大器.合格评定规范.光纤放大器可靠性合格评定 |
(Optical fibre amplifiers - Qualification specifications - Reliability qualification for optical fibre amplifiers) |
BS EN 61293-1995 |
与供电相关的带有额定值的电气设备的标记.安全要求 |
(Marking of electrical equipment with ratings related to electrical supply - Safety requirements) |
BS EN 61297-1996 |
工业过程控制系统.鉴定用自适应控制器的分类 |
(Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation) |
BS EN 61298-1-1996 |
加工测量和控制装置.评定性能用一般方法和程序.第1部分:一般考虑 |
(Process measurement and control devices - General methods and procedures for evaluating performance - General considerations) |
BS EN 61298-2-1996 |
过程测量和控制装置.性能鉴定用一般方法和程序.第2部分:参考条件下的试验 |
(Process measurement and control devices - General methods and procedures for evaluating performance - Tests under reference conditions) |
BS EN 61298-3-1998 |
过程测量和控制装置.性能评定用一般方法和程序.影响量作用的测试 |
(Process measurement and control devices - General methods and procedures for evaluating performance - Tests for the effects of influence quantities) |
BS EN 61298-4-1996 |
加工测量和控制装置.评定性能用一般方法和程序.第4部分:评定报告含量 |
(Process measurement and control devices - General methods and procedures for evaluating performance - Evaluation report content) |
BS EN 613-2001 |
独立式燃气对流加热器 |
(Independent gas-fired convection heaters) |
BS EN 61300-1-2003 |
纤维光学互连器件和无源件.基本试验和测量程序.总则和指南 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - General and guidance) |
BS EN 61300-2-1-2003 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.振动(正弦) |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Tests - Vibration (sinusoidal)) |
BS EN 61300-2-10-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.抗压碎试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Crush resistance) |
BS EN 61300-2-11-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.轴向压缩 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Axial compression) |
BS EN 61300-2-12-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.冲击 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Impact) |
BS EN 61300-2-13-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.加速度试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Acceleration) |
BS EN 61300-2-14-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.最大输出功率 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Maximum input power) |
BS EN 61300-2-15-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.连轴机械的扭矩强度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Torque strength of coupling mechanisms) |
BS EN 61300-2-16-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.霉菌生长试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Mould growth) |
BS EN 61300-2-17-2003 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.低温 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cold) |
BS EN 61300-2-18-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.干热.耐高温试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Dry heat - High temperature endurance) |
BS EN 61300-2-19-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.湿热(稳态)试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Damp heat (steady state)) |
BS EN 61300-2-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.湿热(定态)试验 |
(Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Damp heat (steady state)) |
BS EN 61300-2-2-2003 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.配套耐久性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Mating durability) |
BS EN 61300-2-20-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.气候试验顺序 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Climatic sequence) |
BS EN 61300-2-21-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.复合温湿度往复试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Composite temperature-humidity cyclic test) |
BS EN 61300-2-22-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.温度变化试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Change of temperature) |
BS EN 61300-2-23-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.光纤设备无增压闭路密封试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Sealing for non-pressurized closures of fibre optic devices) |
BS EN 61300-2-24-2000 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.对陶瓷校直夹板套筒加负荷的筛析试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of ceramic alignment split sleeve by stress application) |
BS EN 61300-2-25-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.闭合用密封强度 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Sealing endurance for closures) |
BS EN 61300-2-26-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.盐雾试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Salt mist) |
BS EN 61300-2-27-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.灰尘.层流 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Dust - Laminar flow) |
BS EN 61300-2-28-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.工业大气(二氧化硫)试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Industrial atmosphere (sulphur dioxide)) |
BS EN 61300-2-29-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.低气压试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Tests - Low air pressure) |
BS EN 61300-2-3-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.试验.静态剪切强度试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Tests - Static shear load) |
BS EN 61300-2-30-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.太阳辐射试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Solar radiation) |
BS EN 61300-2-31-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.第2部分第31节:试验.核辐射 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Nuclear radiation) |
BS EN 61300-2-32-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.第2部分第32节:试验.水蒸气渗透性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Water vapour permeation) |
BS EN 61300-2-33-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.第2部分第33节:闭路的组装与拆卸试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Assembly and disassembly of closures) |
BS EN 61300-2-34-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.第2部分第34节:耐溶剂和污染液体试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Resistance to solvents and contaminating fluids) |
BS EN 61300-2-35-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.第2部分第35节:试验.电缆下垂 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable nutation) |
BS EN 61300-2-36-1997 |
光纤互联装置和无源部件.第2部分:基本试验和测量步骤.第36节:试验.易燃性(着火危险) |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Flammability (fire hazard)) |
BS EN 61300-2-37-1997 |
光纤互联装置和无源部件.第2部分:基本试验和测量步骤.第37节:试验.闭路用弯曲电缆 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for closures) |
BS EN 61300-2-38-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.第2部分第38节:光纤设备增压闭路的密封试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Sealing for pressurized closures of fibre optic devices) |
BS EN 61300-2-39-1997 |
光纤互连设备和无源件.基本试验和测量程序.第2部分第39节:试验.外部磁场的灵敏性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Susceptibility to external magnetic fields) |
BS EN 61300-2-4-1997 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.纤维/电缆牢固性 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention) |
BS EN 61300-2-40-2001 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.单模调谐角度光纤连接器衰减的屏幕试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of attenuation of single-mode tuned angled optical connectors) |
BS EN 61300-2-41-1998 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.单模式调谐非角度光纤连接器的筛析试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of attenuation of single-mode tuned non-angled optical fibre connectors) |
BS EN 61300-2-42-1999 |
光纤互连装置和无源部件.基本试验和测量步骤.试验.连接件静态边负载 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Static side load for connectors) |
BS EN 61300-2-43-2000 |
光纤互连装置和无源部件.基本试验和测量步骤.试验.单模PC光纤连接器回程损失的筛析试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of return loss of single mode PC optical fibre connectors) |
BS EN 61300-2-44-2005 |
纤维光学互连器件和无源件.基本试验和测量程序.试验.纤维光学器件应力消除的挠曲 |
|
BS EN 61300-2-45-1999 |
光纤互联装置和无源部件.基本试验和测量步骤.试验.浸水持久性试验 |
(Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Durability test by water immersion) |