标准号 |
中文名称 |
英文名称 |
EN 3475-704-2002 |
航空航天系列飞行器用的电缆试验方法第704部分:柔性 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 704: Flexibility |
EN 3475-705-2002 |
航空航天系列飞行器用的电缆试验方法第705部分:对比测量 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 705: Contrast measurement |
EN 3475-801-2002 |
航空航天系列飞行器用的电缆试验方法第801部分:每单位长度电容 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 801: Capacitance per unit length |
EN 3475-802-2002 |
航空航天系列飞行器用的电缆试验方法第802部分:非平衡电容 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 802: Capacitance unbalance |
EN 3475-803-2002 |
航空航天系列飞行器用的电缆试验方法第803部分:可变电容 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation |
EN 3475-804-2002 |
航空航天系列飞行器用的电缆试验方法第804部分:传播速度 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 804: Velocity of progagation |
EN 3475-805-2002 |
航空航天系列飞行器用的电缆试验方法第805部分:阻抗特征 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance |
EN 3475-806-2002 |
航空航天系列飞行器用的电缆试验方法第806部分:衰减 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 806: Attenuation |
EN 3475-807-2002 |
航空航天系列飞行器用的电缆试验方法 第807部分:传输阻抗 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance / Note: Applies in conjunction with EN 3475-100 (2002-02) |
EN 3475-808-2002 |
航空航天系列飞行器用的电缆试验方法 第808部分:串音 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 808: Cross-talk / Note: Applies in conjunction with EN 3475-100 (2002-02) |
EN 348-1992 |
防护服 试验方法:材料抗熔融金属溅沫冲击性能的测定 |
Protective clothing; Test method: determination of behaviour of materials on impact of small splashes of molten metal |
EN 349-1993 |
机械安全 避免挤压人体各部分的最小间隙 |
Safety of machinery; Minimum gaps to avoid crushing of parts of the human body |
EN 35-2000 |
沿缘供水座式坐浴盆 连接尺寸 |
Pedestal bidets with over-rim supply - Connecting dimensions |
EN 350-1-1994 |
木材和木基制品的耐久性 实心木材的天然耐久性 第1部分:木材天然耐久性的测试和分类原则指南 |
Durability of wood and wood-based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood |
EN 350-2-1994 |
木材和木基制品的耐久性 实心木材的天然耐久性 第2部分:欧洲挑选的重要木材种类的天然耐久性和可处理性 |
Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
EN 3506-2001 |
航空航天系列耐热合金热轧薄板和板材厚度为 2.0 mm ≤a≤100 mm尺寸 |
Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2.0 mm≤ a ≤ 100 mm - Dimensions |
EN 351-1-1995 |
木材和木基制品的耐久性 防腐剂处理过的紧密材 第1部分:防腐剂渗透和滞留的分类 |
Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
EN 351-2-1995 |
木材和木基制品的耐久性 防腐剂处理过的实心木材 第2部分:防腐剂处理的木材分析用取样指南 |
Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood |
EN 352-1-2002 |
听力保护装置 一般要求 第1部分:护耳套 |
Hearing protectors - General requirements - Part 1: Ear-Muffs |
EN 352-2-2002 |
听力保护装置 一般要求 第2部分:耳塞 |
Hearing protectors - General requirements - Part 2: Ear-plugs |
EN 352-3-2002 |
听力保护装置 一般要求 第3部分:工业安全头盔上的耳套 |
Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet |
EN 352-4-2001 |
听力保护器 安全要求和测试 第4部分:电平依赖的耳套 |
Hearing protectors - Safety requirements and testing - Part 4: Level -dependent ear-muffs |
EN 352-5-2002 |
听力保护器 安全要求和测试 第5部分:主动噪声降低耳套 |
Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs |
EN 352-6-2002 |
听力保护器 安全要求和测试 第6部分:带电的音频输入耳套 |
Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input |
EN 352-7-2002 |
听力保护器 安全要求和测试 第7部分:与水平相关的耳塞 |
Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs |
EN 353-1-2002 |
预防高空坠落的人身保护设备 第1部分:包括刚性锚固线的指导型防坠落装置 |
Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchore line |
EN 353-2-2002 |
预防高空坠落的人身保护设备 第2部分:包括挠性锚固线的指导型防坠落装置 |
Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line |
EN 354-2002 |
预防高空坠落的人身保护设备 系索 |
Personal protective equipment against falls from a height - Lanyards |
EN 3541-1992 |
航空航天系列带螺纹可调自对心滚球轴承的端杆尺寸扭矩间隙和载荷 |
Aerospace series - Rod ends, adjustable, self-aligning ball bearing with threaded shank - Dimensions, torques, clearances and loads |
EN 3542-1998 |
航空航天系列耐热镍基合金NI-PH2801(铬镍铁合金X750)螺旋形线圈自锁式螺纹插件 |
Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2081 (Inconel X750) |
EN 3543-1997 |
航空航天系列钝化耐热及耐腐蚀钢制100°埋头标准头偏置十字凹槽紧公差普通杆短螺纹螺钉等级:1100MPa( |
Aerospace series - Screws, 100°countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃ |
EN 355-2002 |
预防高空坠落的人身保护设备 能量吸收装置 |
Personal protective equipment against falls from a height - Energy absorbers |
EN 356-1999 |
建筑物用玻璃 安全玻璃窗 防人为攻击的能力的测试和分类 |
Glass in building - Security glazing - Testing and classification of resistance against manual attack |
EN 3567-001-2001 |
航空航天系列MIL-STD-1553B一致多数据总线系统用在线偶合器第001部分:技术规范 |
Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 001: Technical specification |
EN 3567-003-2001 |
航空航天系列与MIL-STD-1553B一致多数据总线系统在线偶合器第003部分:单内嵌偶合器产品标准 |
Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers; Product standard |
EN 3567-004-2001 |
航空航天系列与MIL-STD-1553B一致多数据总线系统在线偶合器第004部分:双在线耦合器产品标准 |
Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers; Product standard |
EN 357-2000 |
建筑物用玻璃 带透明或半透明玻璃产品的防火玻璃件 防火性分类 |
Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance |
EN 358-1999 |
工作定位和防高空坠落的人身保护设备 工作定位用带及限制和工作定位用系索 |
Personal protective equipment for work positioning and prevention of falls from a height - Belts for work positioning and restraint and work positioning lanyards |
EN 36-1998 |
沿缘供水壁挂式坐浴盆 连接尺寸 |
Wall-hung bidets with over-rim supply - Connecting dimensions |
EN 360-2002 |
预防高空坠落的人身保护设备 可回放型防坠落装置 |
Personal protective equipment against falls from a height - Retractable type fall arresters |
EN 361-2002 |
预防高空坠落的人身保护设备 全身保护成套装置 |
Personal protective equipment against falls from a height - Full body harnesses |
EN 3611-1995 |
航空航天系列套管尺寸和配合选择设计标准 |
Aerospace series - Spigots - Dimensions and fit selection - Design standard |
EN 3612-1996 |
航空航天系列花键用底部切槽设计标准 |
Aerospace series - Undercuts for splines - Design standard |
EN 362-1992 |
预防高空坠落的人身保护设备 连接器 |
Personal protective equipment against falls from a height; connectors |
EN 363-2002 |
预防高空坠落的人身保护设备 防坠落系统 |
Personal protective equipment against falls from a height - Fall arrest systems |
EN 3642-1996 |
航空航天系列阳极氧化TI-P02钛制、100°埋头标准圆顶实心铆钉英制系列 |
Aerospace series - Rivets, solid, 100°countersunk normal head with dome, in titanium TI-PO2, anodized, inch based series |
EN 3643-1996 |
航空航天系列阳极氧化TI-P02钛制、普通100°埋头标准头实心铆钉 英制系列 |
Aerospace series - Rivets, solid, 100°countersunk normal head, in titanium TI-PO2, anodized, inch based series |
EN 3644-1996 |
航空航天系列阳极氧化TI-PO2钛制、万向头实心铆钉英制系列 |
Aerospace series - Rivets, solid, universal head, in titanium TI-PO2, anodized, inch based series |
EN 365-1992 |
预防高空坠落的人身保护设备 使用和标志说明的一般要求 |
Personal protective equipment against falls from a height; Deneral requirements for instructions for use and for marking |
EN 365-2004 |
防人员从高处坠落的保护装置.使用说明、维修、周期检验、修理、标记和包装的一般要求 |
|
EN 3665-1997 |
航空航天系列色漆和清漆的检验方法铝合金耐线状腐蚀的检验 |
Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys |
EN 367-1992 |
防护服 防热和防火 暴露于火焰情况下的传热性能测定方法 |
Protective clothing; Protection against heat and fire; Method of determining heat transmission on exposure to flame |
EN 3676-1998 |
航空航天系列薄壁自锁紧插件设计标准 |
Aerospace series - Inserts, thin wall, self-locking - Design standard |
EN 368-1992 |
防护服 耐液体化学品防护 试验方法:材料耐液体渗透性能 |
Protective clothing; protection against liquid chemicals; test method: resistance of materials to penetration by liquids |
EN 3696-2001 |
航空航天系列耐热钢垫圈 |
Aerospace series - Washers in heat resisting steel |
EN 37-1998 |
独立供水的座式抽水马桶 连接尺寸 |
Pedestal W.C. pans with independent water supply - Connecting dimensions |
EN 370-1993 |
木材防腐剂 防止家具产生窃蠹的根除效果的测定 |
Wood preservatives; determination of eradicant efficacy in preventing emergence of Anobium punctatum (De Geer) |
EN 371-1992 |
呼吸保护设备 抗低沸点有机化合物的AX气体过滤器和综合过滤器 要求、测试、标志 |
Respiratory protective devices; AX gas filters and combined filters against low boiling organic compounds; requirements, testing, marking |
EN 372-1992 |
呼吸保护设备 抗特定化合物的SX气体过滤器和综合过滤器 要求、测试、标志 |
Respiratory protective devices; SX gas filters and combined filters against specific named compounds; requirements, testing, marking |
EN 3720-1995 |
标准号: |
中文标题: |
EN 3721-1995 |
标准号: |
中文标题: |
EN 3722-1995 |
标准号: |
中文标题: |
EN 3723-1996 |
标准号: |
中文标题: |
EN 3724-2003 |
标准号: |
中文标题: |
EN 3724-2004 |
航空航天系列.MoS2涂覆的钛合金TI-P64001制长螺纹细杆双六角头螺栓.强度等级:1100 MPa(室温) |
|
EN 3725-2003 |
标准号: |
中文标题: |
EN 3725-2004 |
航空航天系列.MoS2涂覆的阳极化处理的钛合金TI-P64001制长螺纹标准杆六凸角凹口盘头螺钉.强度等级:1100 MPa(室温) |
|
EN 3726-2003 |
标准号: |
中文标题: |
EN 3726-2004 |
航空航天系列.MoS2耐热钢FE-PA2601 (A286)制自锁紧夹紧螺母.强度等级:1100 MPa(室温)/425鳦 |
|
EN 373-1993 |
防护服 材料耐熔融金属飞溅的评定 |
Protective clothing; Assessment of resistance of materials to molten metal splash |
EN 3730-2001 |
航空航天系列具有橡胶缓冲的铝合金鞍壮固定和滑动型夹箍尺寸质量 |
Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses |
EN 374-1-2003 |
抗化学药品和微生物的防护手套 第1部分:术语和性能要求 |
Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
EN 374-2-2003 |
抗化学药品和微生物的防护手套 第2部分:耐渗透性的测定 |
Protective gloves against chemicals and micro-organisms - Part 2: Determination of resistance to penetration |
EN 374-3-2003 |
抗化学药品和微生物的防护手套 第3部分:耐化学药品渗透的测定 |
Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals |
EN 3740-1996 |
标准号: |
中文标题: |
EN 3741-2003 |
航空航天系列米制夹箍螺母安装孔和装配 |
Aerospace series - Nuts, clip, metric - Installation holes and assembly / Note: To be replaced by prEN 3741 (2003-05). |
EN 3741-2004 |
航空航天系列.米制夹紧螺母.安装孔及组件 |
|
EN 3745-201-2002 |
航空航天系列航空用光缆和光纤试验方法第201部分:目视检查 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 201: Visual examination |
EN 3745-205-2002 |
航空航天系列航空用光缆和光纤试验方法第205部分:电缆纵向尺寸的稳定性 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 205: Cable longitudinal dimensional stability |
EN 3745-301-2002 |
航空航天系列航空用光缆和光纤试验方法第301部分:衰减 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 301: Attenuation |
EN 3745-302-2002 |
航空航天系列航空用光缆和光纤试验方法第302部分: 数字孔径 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 302: Numerical aperture |
EN 3745-305-2002 |
航空航天系列航空用光缆和光纤试验方法第305部分:抗环境光耦合干挠性 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 305: Immunity to ambient light coupling |
EN 3745-504-2002 |
航空航天系列航空用光缆和光纤试验方法第504部分:微弯曲测试 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 504: Micro bending test |
EN 3745-507-2002 |
航空航天系列航空用光缆和光纤试验方法第507部分:开凿 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 507: Cut-through |
EN 3745-508-2002 |
航空航天系列航空用光缆和光纤试验方法第508部分:转矩 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 508: Torsion |
EN 3745-509-2002 |
航空航天系列航空用光缆和光纤试验方法第509部分:绞结测试 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 509: Kink test |
EN 3745-510-2002 |
航空航天系列航空用光缆和光纤试验方法第510部分:弯曲测试 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 510: Bending test |
EN 3745-511-2002 |
航空航天系列航空用光缆和光纤试验方法第511部分:电缆间磨损 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion |
EN 3745-701-2002 |
航空航天系列航空用光缆和光纤试验方法第701部分:可剥离性 |
Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 701: Strippability |
EN 3746-2003 |
航空航天系列硬度 80 IRHD 氟硅橡胶 (FVMQ)O形环 |
Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD / Note: To be replaced by prEN 3746 (2003-05). |
EN 3747-2003 |
航空航天系列氟硅橡胶 (FVMQ)O形环技术规范 |
Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification / Note: To be replaced by prEN 3747 (2003-05). |
EN 3748-2001 |
航空航天系列O 形槽尺寸 |
Aerospace series - O-ring grooves; Dimensions |
EN 375-2001 |
制造商提供的专业用试管诊断试剂信息 |
Information supplied by the manufacturer with in vitro diagnostic reagents for professional use |
EN 3752-2003 |
标准号: |
中文标题: |
EN 3752-2004 |
航空航天系列.MoS2涂覆的耐热钢FE-PA2601 (A286)制MJ螺纹自锁紧螺母.等级:1100 MPa(室温)/425 鳦.技术规范 |
|
EN 3759-1996 |
航空航天系列钝化耐热耐腐蚀钢制全加螺纹的偏十字形槽盘头螺钉等级:1100 MPa(环境温度)/425℃ |
Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃ |
EN 376-2002 |
制造商提供的自测试用试管诊断试剂信息 |
Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing |
EN 3760-1996 |
航空航天系列钝化耐热耐腐蚀钢制全螺纹的偏十字形槽100°埋头标准头螺钉等级:1100MPa(环境温度)/425℃ |
Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃ |
EN 3769-1997 |
航空航天系列耐蚀钢和耐高热合金钢的电解抛光 |
Aerospace series - Electrolytic polishing of corrosion resisting steels and heat resisting alloys |
EN 377-1993 |
使用工业过程中应用的可燃气体以外气体的器具及有关控制装置应用的润滑剂 |
Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes |
EN 3773-001-1999 |
标准号: |
中文标题: |
EN 3773-003-1999 |
标准号: |
中文标题: |
EN 3773-004-1999 |
标准号: |
中文标题: |
EN 3774-001-1999 |
标准号: |
中文标题: |
EN 3774-003-1999 |
标准号: |
中文标题: |
EN 3774-004-1999 |
标准号: |
中文标题: |
EN 378-1-2000 |
制冷系统和热泵 安全和环境要求 第1部分:基本要求、定义、分类和选择准则 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria |
EN 378-2-2000 |
制冷系统和热泵 安全和环境要求 第2部分:设计、结构、测试、标志和文件 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
EN 378-3-2000 |
制冷系统和热泵 安全和环境要求 第3部分:安装位置和人身保护 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
EN 378-4-2000 |
制冷系统和热泵 安全和环境要求 第4部分:操作、维护、修理和恢复 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery |
EN 379-2003 |
人眼防护 自动焊接滤光片 |
Personal eye-protection - Automatic welding filters |
EN 38-1992 |
独立供水的壁挂式抽水马桶 连接尺寸 |
Wall hung W.C. pan with independent water supply; connecting dimensions |
EN 380-1993 |
木材结构 试验方法 静载荷测试的一般原则 |
Timber structures - Test methods - General principles for static load testing |
EN 381-1-1993 |
手持式链锯使用者用防护服 第1部分:耐链锯切割试验用试验台 |
Protective clothing for users of hand held chainsaws; Part 1: Test rig for testing resistance to cutting by a chainsaw |
EN 381-10-2002 |
手持式链锯使用者用防护服 第10部分:上部身体保护服的试验方法 |
Protective clothing for users of hand-held chainsaws - Part 10: Test method for upper body protectors |
EN 381-11-2002 |
手持式链锯使用者用防护服 第11部分:上部身体保护服的要求 |
Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors |
EN 381-2-1995 |
手持式链锯使用者用防护服 第2部分:腿保护服试验方法 |
Protective clothing for users of hand-held chain saws - Part 2: Test methods for leg protectors |
EN 381-3-1996 |
手持式链锯使用者用防护服 第3部分:鞋靴试验方法 |
Protective clothing for users of hand-held chain-saws - Part 3: Test methods for footwear |
EN 381-4-1999 |
手持式链锯使用者用防护服 第4部分:链锯防护手套的试验方法 |
Protective clothing for users of hand-held chainsaws - Part 4: Test methods for chainsaw protective gloves |
EN 381-5-1995 |
手持式链锯使用者用防护服 第5部分:腿防护服的要求 |
Protective clothing for users of hand-held chain saws - Part 5: Requirements for leg protectors |