标准号 |
中文名称 |
英文名称 |
EN 2011-1984 |
航空航天系列 轴承飞行器结构用直径系列8和9耐腐钢滚动、刚性、单列球轴承 尺寸和负载 |
Bearings-airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 8 and 9, dimensions and loads; Aerospace series; inactive for new design, see EN 3283 |
EN 2012-1984 |
航空航天系列 轴承飞行器结构用直径系列0和2滚动、刚性、单列钢制球轴承 尺寸和负载 |
Bearings-airframe rolling, rigid, single row ball bearings in steel, diameter series 0 and 2, dimensions and loads; Aerospace series; inactive for new design, see EN 3284 |
EN 20139-1992 |
纺织品 调湿和试验用的标准大气 |
Textiles; standard atmospheres for conditioning and testing (ISO 139:1973) |
EN 2014-1984 |
航空航天系列 轴承飞行器结构用直径系列0和2耐腐钢制滚动、刚性、单列球轴承 尺寸和负载 |
Bearings-airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 0 and 2, dimensions and loads; Aerospace series; inactive for new design, see EN 3286 |
EN 20140-10-1992 |
声学 .建筑物和建筑构件的隔声测量 第10部分:小型建筑构件空气声隔声的实验室测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 10: Laboratory measurement of airborne sound insulation of small building elements (ISO 140-10:1991) |
EN 20140-2-1993 |
声学 建筑物和建筑构件的隔声测量 第2部分::精确数据的确定 验证和应用 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 2: Determination, verification and application of precision data (ISO 140-2:1991) |
EN 20140-9-1993 |
声学 建筑物和建筑构件的隔声测量 第9部分:上方有压力通风室的悬挂天花板的空气声隔声的实验室测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it (ISO 140-9:1985) |
EN 2015-1984 |
航空航天系列 轴承飞行器结构用直径系列2的滚动、自位双列球轴承 尺寸和负载 |
Bearings-airframe rolling, double row, self aligning ball bearings in steel, diameter series 2, dimensions and loads; Aerospace series; inactive for new design, see EN 3287 |
EN 2017-1984 |
航空航天系列 轴承飞行器结构用直径系列2的滚动 自位耐腐钢球轴承 尺寸和负载 |
Bearings-airframe rolling, double row, self aligning ball bearings, in corrosion resisting steel, diameter series 2, dimensions and loads; Aerospace series; inactive for new design, see EN 3289 |
EN 2018-1984 |
航空航天系列 轴承飞行器结构用直径系列3和4的滚动 自位单列滚子轴承 尺寸和负载 |
Bearings-airframe rolling, single row, self aligning roller bearings in steel, diameter series 3 and 4, dimensions and loads; Aerospace series; inactive for new design, see EN 3290 |
EN 20187-1993 |
纸、纸板和纸浆 温湿处理和试验的标准大气及其控制程序与试样温湿处理的步骤 |
Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990) |
EN 2020-1984 |
航空航天系列 轴承飞行器结构用直径系列3和4单耐腐蚀钢滚动 自位单列滚子轴承 滚动刚性规范 尺寸和负载 |
Bearings-airframe rolling, single row, self aligning roller bearings in corrosion resisting steel, diameter series 3 and 4, dimensions and loads; Aerospace series; inactive for new design, see EN 3292 |
EN 20225-1991 |
紧固件 螺栓、螺柱和螺母 尺寸代号和标注 |
Fasteners; Bolts, screws, studs and nuts; Symbols and designation of dimensions (ISO 225:1983) |
EN 20273-1991 |
紧固件 螺栓和螺钉用通孔 |
Fasteners; Clearance holes for bolts and screws (ISO 273:1979) |
EN 20284-1993 |
输送带 电导率 规范和试验方法 |
Conveyor belts; electrical conductivity; specification and method of test (ISO 284:1982) |
EN 20286-1-1993 |
ISO极限和配合制 第一部分:公差、偏差和配合的基础 |
ISO system of limits and fits; Part 1: Bases of tolerances, deviations and fits (ISO 286-1:1988) |
EN 20286-2-1993 |
ISO极限和配合制 第二部分:孔和轴的标准公差等级和极限偏差表 |
ISO system of limits and fits; Part 2: Tables of standard tolerances grades and limit deviations for holes and shafts (ISO 286-2:1988) |
EN 20287-1994 |
纸和纸板 含水量的测定 烘干法 |
Paper and board - Determination of moisture content - Oven-drying method (ISO 287:1985) |
EN 203-2-1995 |
气体加热供膳设备 第2部分:能源的合理使用 |
Gas heated catering equipment - Part 2: Rational use of energy |
EN 2032-1-2001 |
航空航天系列 金属材料 第1部分:规范命名 |
Aerospace series - Metallic materials - Part 1: Conventional designation |
EN 2032-2-1994 |
航空航天系列 金属材料 第2部分:交货条件中冶金条件的规定 |
Aerospace series; metallic materials - Part 2: Coding of metallurgical condition in delivery condition |
EN 20340-1993 |
输送带 阻燃性 规范和试验方法 |
Conveyor belts; flame retardation; specifications and test method (ISO 340:1988) |
EN 204-2001 |
用于非结构应用目的的热塑性木材粘合剂的分类 |
Classification of thermoplastic wood adhesives for non-structural applications |
EN 2044-2001 |
航空航天系列 拉制的圆形铝和铝合金型材 容差h11 直径4mm≤D≤63mm 尺寸 |
Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm ≤ D ≤ 63 mm - Dimensions |
EN 2045-2001 |
航空航天系列 拉制的方形铝和铝合金型材 容差h11 厚度6mm≤a≤50mm 尺寸 |
Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm ≤ a ≤ 50 mm - Dimensions |
EN 2046-2001 |
航空航天系列 拉制的六角形铝和铝合金型材 容差h11 厚度6mm≤a≤50mm 尺寸 |
Aerospace series - Hexagonal bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm ≤ a ≤ 50 mm - Dimensions |
EN 2047-2001 |
航空航天系列 挤压的铝合金珠状L截面 尺寸 |
Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions |
EN 2048-2001 |
航空航天系列 挤压的铝合金L截面 尺寸 |
Aerospace series - Extruded L-section, in aluminium alloys - Dimensions |
EN 2049-2001 |
航空航天系列 挤压的铝合金槽形材 尺寸 |
Aerospace series - Extruded channel section, in aluminium alloys - Dimensions |
EN 205-2003 |
粘合剂用于非结构应用目的的木材粘合剂的试验方法 搭接缝抗拉剪切强度的测定 |
Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
EN 2050-2001 |
航空航天系列 挤压的铝合金T型材 尺寸 |
Aerospace series - Extruded T-section, in aluminium alloys - Dimensions |
EN 20534-1993 |
纸和纸板 厚度和层积单层表观密度的测定 |
Paper and board; determination of thickness and apparent bulk density or apparent sheet density (ISO 534:1988) |
EN 20535-1994 |
纸和纸板 水吸收性测定 Cobb法 |
Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:1991) |
EN 206-1-2000 |
混凝土 第1部分:规范、性能、 生产和合格性 |
Concrete - Part 1: Specification, performance, production and conformity |
EN 206-1/A1-2004 |
混凝土.第1部分:规范、性能、生产及合格性 |
|
EN 2063-1992 |
航空航天系列 飞行器结构滚动轴承 技术规范 |
Aerospace series - Airframe rolling bearings - Technical specification; inactive for new design, see EN 3280 |
EN 20638-1993 |
纸浆 绝干物含量的测定 |
Pulps - Determination of dry matter content (ISO 638:1978) |
EN 2064-1992 |
航空航天系列 自润滑耐腐钢轴承球面 技术规范 |
Aerospace series - Bearings spherical plain in corrosion resisting steel with self lubricating liner - Technical specification |
EN 2066-2001 |
航空航天系列 铝合金挤压型材 一般公差 |
Aerospace series - Extruded section in aluminium alloys - General tolerances |
EN 20693-1991 |
缝焊轮坯尺寸 |
Dimensions of seam welding wheel blanks (ISO 693:1982) |
EN 2070-2-1989 |
航空航天系列 锻造的铝和铝合金产品 技术规范 第2部分:薄板、带型材和板材 |
Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 2: Sheet, strip formed profiles and plate |
EN 2070-3-1989 |
航空航天系列 锻造的铝和铝合金产品 技术规范 第3部分:棒材和型材 |
Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 3: Bar and section |
EN 2070-4-1989 |
航空航天系列 锻造的铝和铝合金产品 技术规范 第4部分:结构用管 |
Aerospace series - Aluminium and aluminium alloy wrought products - Technical specifications - Part 4: Tube for structures |
EN 2070-5-1989 |
航空航天系列 锻造的铝和铝合金产品 技术规范 第5部分:压力下用管 |
Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 5: Tube used under pressure |
EN 2070-6-1989 |
航空航天系列 锻造的铝和铝合金产品 技术规范 第6部分:铆钉用线材 |
Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 6: Rivet wire |
EN 2070-7-1989 |
航空航天系列 锻造的铝和铝合金产品 技术规范 第7部分:锻坯 |
Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 7: Wrought forging stock |
EN 2071-2001 |
航空航天系列 铝和铝合金薄板 厚度0.25mm≤a≤6mm 尺寸 |
Aerospace series - Sheets in aluminium and aluminium alloys - Thickness 0.25 mm≤ a ≤ 6 mm - Dimensions |
EN 2072-1993 |
航空航天系列 铝AI-P1050AH14 薄板材和带材0.4mm≤a≤6mm |
Aerospace series - Aluminium Al-P1050A H14; sheet and strip 0.4 ≤ a ≤6 mm |
EN 2076-2-1989 |
航空航天系列 铝和镁合金铸锭和铸件 技术规范 第2部分:冶炼用铸锭 |
Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 2: Ingots for remelting |
EN 2076-3-1989 |
航空航天系列 铝和镁合金铸锭和铸件 技术规范 第3部分:预制件和产品铸件 |
Aerospace series - Aaluminium and magnesium alloy ingots and castings - Technical specification - Part 3: Pre-production and production castings |
EN 2078-2001 |
航空航天系列 金属材料 生产进度表 检查进度表 检查和试验报告 定义、一般原则、编制和批准 |
Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report; Definition, general principles, preparation and approval |
EN 2079-1995 |
航空航天系列 仪器和设备用有耐腐蚀钢法兰的精密球轴承 |
Aerospace series - Bearings, precision ball with flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads |
EN 20811-1992 |
纺织织物 抗渗水性的测定 静水压试验 |
Textiles; determination of resistance to water penetration; hydrostatic pressure test |
EN 2082-2-1989 |
航空航天系列 铝合金锻坯和锻件 技术规范 第2部分:锻坯 |
Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 2: Forging stock |
EN 2082-3-1989 |
航空航天系列 铝合金锻坯和锻件 技术规范 第3部分:预制件和锻件 |
Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings |
EN 2083-2001 |
航空航天系列 电缆用铜和铜合金导体 产品标准 |
Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard |
EN 20865-1991 |
凸焊机面的槽 |
Slots in plates for projection welding machines (ISO 865:1981) |
EN 2089-1994 |
航空航天系列 铝合金AL-P2014A T6或T62 薄板及带材 0.4mm≤a≤6mm |
Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - sheet and strip - 0.4 mm ≤ a ≤ 6 mm |
EN 20898-2-1993 |
紧固件机械性能 第2部分:规定保证载荷值的螺母 粗牙螺纹 |
Mechanical properties of fasteners; Part 2: Nuts with specified proof load values; Coarse thread (ISO 898-2:1992) |
EN 20898-7-1995 |
紧固件机械性能 第7部分:螺栓与螺钉的扭矩试验和最小扭矩公称直径1MM—10MM |
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm (ISO 898-7:1992) |
EN 209-1999 |
钢圆桶 最小总容积为210升的可移动盖(开口盖)圆桶 |
Steel drums - Removable head (open head) drums with a minimum total capacity of 210 l |
EN 2092-1993 |
航空航天系列 铝合金AL-P7050-T6或T62 包层薄板和带材0.4mm≤a≤6mm |
Aerospace series - Aluminium alloy Al-P7075-T6 or T62 - Clad sheet and strip 0.4mm≤ a ≤6 mm |
EN 2093-1992 |
航空航天系列 铝合金AL-P7009-T74 手工锻件20mm≤a≤150mm |
Aerospace series - Aluminium alloy AL-P7009-T74 - Hand forgins 20 mm ≤ a ≤ 150 mm |
EN 2094-1992 |
航空航天系列 铝合金AL-P7009-T74 模锻件3mm≤a≤150mm |
Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgins 3 mm ≤ a ≤ 150 mm |
EN 210-1999 |
钢圆桶 最小总容积为216.5升的不可移动盖(密闭盖)圆桶 |
Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 216,5 l |
EN 2100-1992 |
航空航天系列 铝合金AL-P2014A-T4511 挤压棒材和型材a或D≤200mm |
Aerospace series - Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D ≤ 200 mm |
EN 2101-1991 |
航空航天系列 铝合金和锻铝合金铬酸阳极化处理 |
Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys |
EN 2103-1-1991 |
航空航天系列 钢、镍基合金以及钴基合金再熔料和铸件 技术规范 第1部分:一般要求 |
Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 1: General requirements |
EN 2103-2-1991 |
航空航天系列 钢、镍基合金及钴基合金再熔料和铸件 技术规范 第2部分:再熔料 |
Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 2: Remelting stock |
EN 2103-3-1991 |
航空航天系列 钢、镍基合金及钴基合金再熔料和铸件 技术规范 第3部分:预制件和铸件 |
Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 3: Pre-production and production castings |
EN 2104-1996 |
航空航天系列 丙烯腈 聚丁橡胶(NBR) 硬度 40 IRHD |
Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD |
EN 21089-1991 |
点焊设备用电极锥度配合 尺寸 |
Electrode taper fits for spot welding equipment- Dimensions (ISO 1089:1980) |
EN 212-2003 |
木材防腐剂 用于分析的木材防腐剂和经处理的木材的取样和制备的一般指南 |
Wood preservatives - General guidance on sampling and preparation for analysis of wood preservatives and treated timber |
EN 2122-1996 |
航空航天系列 阳极化和铬酸盐处理的扁平铝合金垫圈 |
Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated |
EN 2126-1992 |
航空航天系列 铝合金AL-P7075-T651 板材 6mm≤a≤80mm |
Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm ≤ a ≤ 80 mm |
EN 2127-1992 |
航空航天系列 铝合金AL-P7075-T73511 挤压棒材和型材 a或D≤100mm |
Aerospace series - Aluminium alloy AL-P7075-T73511 - Extrudes bars and sections a or D ≤ 100 mm |
EN 2128-1992 |
航空航天系列 铝合金AL-P7075-T7351 拉制棒材 6mm≤a或D≤75mm |
Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm ≤ a or D ≤ 75 mm |
EN 2130-2001 |
航空航天系列 仪表和设备用的耐腐蚀钢精密球轴承 尺寸和负荷 |
Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification |
EN 2131-2001 |
航空航天系列 铝合金板材 厚度 6mm≤a≤160mm 尺寸 |
Aerospace series - Plates in aluminium alloys - Thickness 6 mm ≤a ≤ 160 mm - Dimensions |
EN 2134-2001 |
航空航天系列 挤压铝和铝合金圆形型材 直径10mm≤D≤220mm 尺寸 |
Aerospace series - Round bars, extruded, in aluminium and aluminium alloys - Diameter 10 mm ≤ D ≤ 220 mm - Dimensions |
EN 2138-1999 |
航空航天系列 扁平镀镉钢垫圈 |
Aerospace series - Washers, flat, in steel, cadmium plated |
EN 2139-1989 |
航空航天系列 扁平耐热钢垫圈 |
Aerospace series; washers, flat heat resisting steel |
EN 2144-1994 |
航空航天系列 铝合金2117系列万能分度头型实心铆钉 英制系列 |
Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series |
EN 2145-1994 |
航空航天系列 经过阳极氧化或铬酸盐处理的2117号铝合金制万能分度头型实心铆钉 英制系列 |
Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series |
EN 2149-1996 |
航空航天系列 经阳极氧化处理或经铬酸盐处理的5056A型铝制万能分度头型实心铆钉 英制系列 |
Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series |
EN 215-2004 |
恒温散热器阀.要求和试验方法 |
|
EN 2155-12-1997 |
航空航天系列 飞机门窗玻璃用透明材料的试验方法 第12部分:线性热膨胀测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 12: Determination of linear thermal expansion |
EN 2155-13-1993 |
航空航天系列 飞机门窗玻璃用透明材料的试验方法 第13部分:负载下温度偏差的测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 13: Determination of temperature at deflection under load |
EN 2155-14-1993 |
航空航天系列 飞机门窗玻璃用透明材料的试验方法 第14部分:1/10降低温度的测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing; Part 14: Determination of the 1/10 Vicat softening temperature |
EN 2155-19-1996 |
航空航天系列 飞行门窗玻璃用透明材料的试验方法 第19部分:抗裂纹的测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 19: Determination of craze resistance |
EN 2155-2-1993 |
航空航天系列 飞机门窗玻璃用透明材料试验方法 第2部分:吸水性的测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing; Part 2: Determination of water absorption |
EN 2155-21-1989 |
航空航天系列 飞机门窗玻璃用透明材料的试验方法 第21部分:防裂纹扩展(K系数)的测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing; Part 21: Determination of resistance to crack propagation (K-factor) |
EN 2155-3-1993 |
航空航天系列 飞机门窗玻璃用透明材料试验方法 第3部分:折射率的测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing; Part 3: Determination of refractive index |
EN 2155-5-1989 |
航空航天系列 飞机门窗玻璃用透明材料试验方法 第5部分:可见光传播的测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing; Part 5: Determination of visible light transmission |
EN 2155-7-1997 |
航空航天系列 飞机门窗玻璃用透明材料试验方法 第7部分:光偏移的测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing - Part 7: Determination of optical deviation |
EN 2155-8-1989 |
航空航天系列 飞机门窗玻璃用透明材料的试验方法 第8部分:光学畸变测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing; Part 8: Determination of optical distortion |
EN 2155-9-1989 |
航空航天系列 飞机门窗玻璃用透明材料的试验方法 第9部分:薄雾测定 |
Aerospace series - Test methods for transparent materials for aircraft glazing; Part 9: Determination of haze |
EN 21560-1991 |
牙科学 牙科汞 |
Dentistry - Dental mercury (ISO 1560:1985) |
EN 21563-1991 |
藻酸盐牙科印模材料 |
Alginate dental impression material (ISO 1563:1990) |
EN 2157-1-1993 |
航空航天系列 钢、锻坯和锻件 技术规范 第1部分:一般要求 |
Aerospace series - Steel ,forging stock and forgings - Technical specification - Part 1: General requirements |
EN 2157-2-1993 |
航空航天系列 钢、锻坯和锻件 技术规范 第2部分:锻坯 |
Aerospace series Steel, forging stock and forgings - Technical specification - Part 2: Forging stock |
EN 2157-3-1993 |
航天工业系列 钢、锻坯和锻件 技术规范 第3部分:锻造产品和坯件 |
Aerospace series - Steel, forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings |
EN 21683-1994 |
声学 基准声学量 |
Acoustics - Preferred reference quantities for acoustic levels (ISO 1683:1983) |
EN 21942-1-1991 |
牙科词汇 第1部分:一般和临床术语 |
Dental vocabulary; part 1: general and clinical terms |
EN 21942-2-1992 |
牙科词汇 第2部分:牙科材料 |
Dental vocabulary; part 2: dental materials (ISO 1942-2:1989) |
EN 21942-3-1993 |
牙科词汇 第3部分:牙科器械 |
Dental vocabulary; part 3: dental instruments (ISO 1942-3:1989) |
EN 21942-4-1993 |
牙科词汇 第4部分:牙科设备 |
Dental vocabulary; part 4: dental equipment (ISO 1942-4:1989) |
EN 21974-1994 |
纸 撕裂度试验(埃尔门多夫法) |
Paper - Determination of tearing resistance (Elmendorf method) (ISO 1974:1990) |
EN 22-1974 |
木材防腐剂 对家天牛幼虫(Linnaeus)根除作用的测定(实验室法) |
Wood preservatives; Determination of eradicant action against Hylotrupes bajulus (Linnaeus) larvae (Laboratory method) |
EN 22063-1993 |
金属和其他无机涂覆盖层 热喷镀 锌、铝及其合金 |
Metallic and other inorganic coatings - Thermal spraying - Zinc, aluminium and their alloys (ISO 2063:1991, modified) |
EN 22206-1992 |
包装 满装运输包装 试验时包装件的标识 |
Packaging; complete, filled transport packages; identification of parts when testing (ISO 2206:1987) |
EN 22248-1992 |
包装 满装运输包装 跌落垂直冲击试验 |
Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985) |
EN 22313-1992 |
纺织品 用回复角表示的水平折叠试样的折痕回复性的测定 |
Textile fabrics; determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery |
EN 22339-1992 |
不淬硬圆锥销 |
Taper pins, unhardened (ISO 2339:1986) |
EN 22340-1992 |
带孔销 |
Clevis pins without head (ISO 2340:1986) |
EN 22341-1992 |
销轴 |
Clevis pins with head (ISO 2341:1986) |
EN 2236-1992 |
航空航天系列 带头高精密公差钉体的合金钢销钉 技术规范 |
Aerospace series - Pins, headed, close tolerance shank, in alloy steel - Technical specification |
EN 2243-2-1991 |
航空航天系列 结构用粘合剂 试验方法 第2部分:金属-金属剥离 |
Aerospace series - Structural adhesives - Test methods - Part 2: Peel metal-metal |
EN 2243-3-1991 |
航空航天系列 结构用粘合剂 第3部分:试验方法 金属与蜂窝状心的剥离试验 |
Aerospace series - Structural adhesives - Test methods - Part 3: Peeling test metal-honeycomb core |
EN 2243-4-1991 |
航空航天系列 结构用粘合剂 试验方法 第4部分:金属与蜂窝状芯平直拉伸试验 |
Aerospace series - Structural adhesives - Test methods - Part 4: Metal-honeycomb core flatwise tensile test |