标准号 |
中文名称 |
英文名称 |
| prEN 13859-2-2000 |
挠性防水板 衬底的定义和特性 第2部分：墙面衬底 |
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls |
| prEN 13860-3-2003 |
无损检测 涡流检查 设备特性和检定 第3部分：系统特性和检定 |
Non destructive testing - Eddy current examination; Equipment characteristics and verification - Part 3: System characteristics and verification |
| prEN 13863-1-2002 |
混凝土路面 试验方法 第1部分：通过测量法测定混凝土板的厚度 |
Concrete pavements - Part 1: Test methods for the determination of the thickness of a concrete pavement by survey method |
| prEN 13863-3-2000 |
混凝土路面 试验方法 第3部分：两个混凝土层之间结合力的测定 |
Concrete pavements - Test methods - Part 3: Determination of bond between two concrete layers |
| prEN 13863-4-2002 |
混凝土路面 试验方法 第4部分：混凝土板厚度的测定 |
Concrete pavements - Test methods for functional requirements - Part 4: Determination of the thickness of a concrete slab |
| prEN 13863-5-2001 |
混凝土路面 试验方法 第5部分：抗柱栓胎磨损性的测定 |
Concrete pavements - Test methods - Part 5: Determination of wear resistance to studded tyres |
| prEN 13864-2000 |
运动场表面 人工草皮拉伸强度的测定 |
Surfaces for sports areas - Determination of tensile strength of synthetic yarns |
| prEN 13865-2003 |
运动场表面 角球性能的测定 网球 |
Surfaces for sports areas - Determination of angled ball behaviour - Tennis |
| prEN 13870-2000 |
食品加工机械 切碎机 安全和卫生要求 |
Food processing machinery - Chop cutting machines - Safety and hygiene requirements |
| prEN 13871-2000 |
食品加工机械 切块机 安全和卫生要求 |
Food processing machinery - Cubes cutting machines - Safety and hygiene requirements |
| prEN 13872-2003 |
水压调整地面平滑和/或调平用复合物的试验法 尺寸变化的测定 |
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change |
| prEN 13877-1-2003 |
混凝土路面 第1部分：材料 |
Concrete pavements - Part 1: Materials |
| prEN 13877-2-2000 |
混凝土路面 第2部分：混凝土路面的功能要求 |
Concrete pavements - Part 2: Functional requirements for concrete pavements |
| prEN 13880-5-2002 |
热接合密封剂 试验方法 第5部分：流动阻力的测定 |
Hot applied joint sealants - Part 5: Test method for the determination of flow resistance |
| prEN 13880-6-2003 |
热接合密封剂 试验方法 第6部分：试样制备 |
Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing |
| prEN 13885-2000 |
食品加工机械 切棒机 安全和卫生要求 |
Food processing machinery - Clipping machines - Safety and hygiene requirements |
| prEN 13886-2000 |
食品加工机械 配备搅拌器和/或混合器的烹调锅 安全和卫生要求 |
Food processing machinery - Cooking kettles equipped with stirrer and/or mixer - Safety and hygiene requirements |
| prEN 1389-2003 |
先进技术陶瓷 陶瓷复合物 物理性能 密度和表观气孔率的测定 |
Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity / Note: Intended as replacement for ENV 1389 (1994-03). |
| prEN 13892-3-2002 |
样板材料试验方法 第3部分：耐磨性Bohme的测定 |
Methods of test for screed materials - Part 3: Determination of wear resistance-Boehme |
| prEN 13894-1-2003 |
用于保护和修理混凝土结构的产品和系统 试验方法 动态负载下疲劳强度的测定 第1部分：处理过程中 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 1: During cure |
| prEN 13897-2000 |
挠性防水板 沥青.塑料和橡胶屋面防水板 低温下拉伸后防水性的测定 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness after stretching at low temperature |
| prEN 13911-2003 |
消防员防护服 消防员防火罩的要求和试验方法 |
Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters |
| prEN 13912-2000 |
楼梯构件的木材和木基材料 要求 |
Wood and wood-based materials in stair components - Requirements |
| prEN 13914-1-2003 |
外部粉刷和内部抹灰的设计、制备和应用 第1部分：外部粉刷 |
Design, preparation and application of external rendering and internal plastering - Part 1: External rendering |
| prEN 13914-2-2002 |
外部粉刷和内部抹灰的设计、制备和应用 第2部分：内部抹灰 |
Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering |
| prEN 13915-2000 |
预制石膏墙板 定义、要求和试验方法 |
Prefabricated gypsum wallboard panels - Definitions, requirements and test methods |
| prEN 13916-2000 |
防火门 要求和分类 |
Fire resisting doorsets - Requirements and classification |
| prEN 13917-1-2000 |
装备电子累加器的指令75/33/EEC和79/83/EEC 覆盖范围内的水表 第1部分：一般要求 |
Water meters within the scope of Directives 75/33/EEC and 79/833/EEC, equiped woth electronic totalizing devices - Part 1: General requirements |
| prEN 13917-2-2000 |
装备电子累加器的指令75/33/EEC和79/83/EEC覆盖范围内的水表 第2部分：型式批准试验 |
Water meters within the scope of Directives 75/33/EEC and 79/833/EEC, equiped woth electronic totalizing devices - Part 2: Pattern approval tests |
| prEN 13921-1-2003 |
个人保护设备 人机工程学原理 第1部分：设计和规范的一般要求 |
Personal protective equipment - Ergonomic principles - Part 1: General guidance |
| prEN 13921-3-2003 |
个人保护设备 人机工程学原理 第3部分：生物机械特性 |
Personal protective equipment - Ergonomic principles - Part 3: Biomechanical characteristics |
| prEN 13921-4-2003 |
个人保护设备 人机工程学原理 第4部分：耐热性 |
Personal protective equipment - Ergonomic principles - Part 4: Thermical characteristics |
| prEN 13921-6-2003 |
个人保护设备 人机工程学原理 第6部分：灵敏因子 |
Personal protective equipment - Ergonomic principles - Part 6: Sensory factors |
| prEN 13923-2000 |
绕制玻璃纤维加强塑料（FRP）压力容器 材料、设计、计算、制造和试验 |
Filament wound FRP pressure vessels - Materials, design, calculation, manufacturing and testing |
| prEN 13924-2003 |
沥青和沥青粘合剂 硬路级沥青规范 |
Bitumen and bituminous binders - Specifications for hard paving grade bitumens |
| prEN 13925-3-2002 |
无损检测 多晶和非晶材料的X射线衍射 第3部分：仪器 |
Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments |
| prEN 13938-4-2003 |
民用爆破器材推进剂和火箭推进剂第4部分：常温条件下燃烧强度的测定 |
Explosives for civil uses - Propellants and rocket propellants - Part 4: Determination of burning rate under ambient conditions |
| prEN 13938-5-2002 |
民用爆破器材推进剂和火箭推进剂第5部分：火箭用固体推进剂 空芯用裂缝的测定指南 |
Explosives for civil uses - Propellants and rocket propellants - Part 5: Solid rocket propellants; Guide for the determination of voids and fissures |
| prEN 13938-6-2001 |
民用爆破器材推进剂和火箭推进剂第6部分：火箭用固体燃料推进剂 抑制剂涂层完整性的测定指南 |
Explosives for civil uses - Propellants and rocket propellants - Part 6: Solid rocket propellants; Guide for the determination of integrity of inhibitor coatings |
| prEN 13945-2000 |
车辆加油设备 |
Vehicle refuelling appliances |
| prEN 13947-2000 |
幕墙的热特性热传递系数的计算简化方法 |
Thermal performances of curtain walling - Calculation of thermal transmittance - Simplified method |
| prEN 13948-2000 |
柔性防水板防水用的沥青、塑料和橡胶层底部防渗水性的测定 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration |
| prEN 13950-2000 |
石膏板隔热/隔音复合镶板定义、要求和试验方法 |
Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
| prEN 13954-2000 |
食品加工机械面包切片机卫生和安全要求 |
Food processing machinery - Bread slicers - Safety and hygiene requirements |
| prEN 13956-2000 |
柔性防水板屋面防水用的塑料板和橡胶板 特性和定义 |
Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
| prEN 13959-2000 |
公称压力在DN6至DN250（含DN250）的防污染控制阀E族A、B、C和D型 |
Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A, B, C and D |
| prEN 13963-2000 |
石膏壁板连结材料 定义 要求和试验方法 |
Jointing materials for gypsum plasterboards - Definitions, requirements and test methods |
| prEN 13964-2003 |
悬吊式天花板要求和试验方法 |
Suspended cielings - Requirements and test methods |
| prEN 13965-1-2003 |
废弃物的特征描述术语第1部分：相关材料的术语和定义 |
Characterization of waste - Terminology - Part 1: Material related terms and definitions |
| prEN 13965-2-2003 |
废弃物的特征描述术语第2部分：相关处理的术语和定义 |
Characterization of waste - Terminology - Part 2: Management related terms and definitions |
| prEN 13969-2000 |
柔性防水板沥青防潮薄膜包括塑料和橡胶基防水薄膜定义和特性 |
Flexible sheets for waterproofing - Bitumen damp proof membranes including plastic and rubber basement tanking membranes - Definitions and characteristics |
| prEN 13970-2000 |
柔性防水板沥青水气隔离层定义和特性 |
Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics |
| prEN 13976-1-2003 |
救护系统保育箱的运送第1部分：接触面条件 |
Rescue systems - Transportation of incubators - Part 1: Interface conditions |
| prEN 13976-2-2003 |
救护系统保育箱的运送第二部分：系统要求 |
Rescue systems - Transportation on incubators - Part 2: System requirements |
| prEN 13977-2000 |
铁路设备轨道装置供铺设和维修用的便携设备及手摇车 |
Railway applications - Track - Portable machines and trolleys for construction and maintenance |
| prEN 13978-1-2000 |
预制混凝土产品预制混凝土车库第1部分：:钢筋混凝土车库整体式或构件装配式，产品性能及使用情况 |
Precast concrete products - Precast concrete garage - Part 1: Reinforced garages monolithic or consisting of elements; Product properties and performances |
| prEN 13978-2-2000 |
预制混凝土产品预制混凝土车库第2部分：钢纤维混凝土车库，产品性能及使用情况 |
Precast concrete products - Precast concrete garages - Part 2: Steel fibre concrete garages; Product properties and performances |
| prEN 13979-1-2003 |
铁路设备轮副及转向架，轮子，技术验收程序第1部分：锻制轮和轧制轮 |
Railway applications - Wheelsets and bogies, Monobloc wheels; Technical approval procedure - Part 1: Forged and rolled wheels |
| prEN 13981-2-2001 |
铝和铝合金铁路结构用产品，检验和交货技术条件第2部分：板材和片材 |
Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| prEN 13982-2000 |
表面活性剂烷基酰氨基丙基甜菜碱和烷基甜菜碱中活性物质含量的测定 |
Surface active agents - Determination of the active matter content of alkylamidopropylbetaines and alkylbetaines |
| prEN 13984-2000 |
柔性防水板塑料和橡胶蒸汽隔离层定义和特性 |
Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics |
| prEN 13990-2003 |
木地板实心软木地板 |
Wood flooring - Solid softwood flooring boards |
| prEN 13997-2003 |
灌溉技术 灌溉系统使用的连接和控制部件技术特性和试验 |
Irrigation techniques - Connection and control accessories for use in irrigation systems - Technical characteristics and testing |
| prEN 1401-5-1994 |
非压力地下污废水排放用塑料管道系统 硬聚氯乙烯(PVC-U) 第5部分：使用系统的适合性 |
Plastics piping systems for non-pressure underground drainage and sewerage; unplasticized poly(vinyl chloride) (PVC-U); part 5: fitness for purpose of the system |
| prEN 14010-2003 |
机械安全机械化汽车停车场设备设计制造安装和经营阶段的电磁兼容性（EMC）要求和安全 |
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| prEN 14013-2000 |
烟雾控制门要求和分类 |
Smoke control doorsets - Requirements and classification |
| prEN 14015-1-2000 |
在环境温度和高于环境温度用于储存液体现场建造的垂直圆柱形平底地面焊接金属罐的设计和制造规范 |
Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, metallic tanks for the storage of liquids at ambient temperature and above - Part 1: Steel tanks |
| prEN 14016-1-2003 |
碳酸镁片胶粘剂苛性氧化镁和氯化镁第1部分：要求和定义 |
Binders for magnesite screeds - Caustic magnesia and magnesiumchloride - Part 1: Definitions, requirements |
| prEN 14016-2-2003 |
碳酸镁片胶结剂苛性氧化镁和氯化镁第2部分：试验方法 |
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods |
| prEN 14017-2000 |
农用和林业机械固体肥料播撒机安全 |
Agricultural and forestry machinery - Solid fertilizer distributors - Safety |
| prEN 14018-2000 |
农用和林业机械播种机 安全 |
Agricultural and forestry machinery - Seed drills - Safety |
| prEN 14019-2003 |
幕墙抗冲击性性能要求 |
Curtain walling - Impact resistance - Performance requirements |
| prEN 14021-2003 |
用于非公路上摩托车司机免受石块和碎片袭击保护的防石罩要求和试验方法 |
Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods |
| prEN 14023-2001 |
沥青和沥青粘合剂聚合改性沥青的规范 |
Bitumen and bituminous binders - Specifications for polymer modified bitumens |
| prEN 14024-2000 |
热栅的金属外形机械性能技术要求、检验和试验的评估 |
Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment |
| prEN 14025-2003 |
危险品运输罐金属压力罐设计和制造 |
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction |
| prEN 14026-2000 |
建筑玻璃能量平衡值测定计算方法 |
Glass in building - Determination of energy balance value - Calculation method |
| prEN 14034-1-2002 |
尘埃浮云爆炸特点的测定第1部分：最大爆炸压力的测定 |
Determination of the explosion characteristics of dust clouds - Part 1: Determination of the maximum explosin pressure |
| prEN 14034-4-2000 |
尘埃浮云爆炸特点的测定 第4部分：尘埃浮云极限氧浓度的测定 |
Determination of the explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration of dust clouds |
| prEN 14035-11-2000 |
烟柢第11部分：电引爆装置试验方法和规范 |
Fireworks - Part 11: Electrical igniters; Specification and test methods |
| prEN 14035-22-2002 |
烟花第22部分：火箭炮烟花试验方法和规范 |
Fireworks - Part 22: Mines; Specification and test methods |
| prEN 14035-24-2002 |
烟花 第24部分：新引线 试验方法和规范 |
Fireworks - Part 24: Novelty matches; Specification and test methods |
| prEN 14035-28-2002 |
烟花第28部分：罗马式烟花 试验方法和规范 |
Fireworks - Part 28: Roman candles; Specification and test methods |
| prEN 14035-29-2002 |
烟花第２９部分：蛇形烟花试验方法和规范 |
Fireworks - Part 29: Serpents; Specification and test methods |
| prEN 14035-3-2002 |
烟花第3部分：高空旋转烟花试验方法和规范 |
Fireworks - Part 3: Aerial wheels; Specification and test methods |
| prEN 14035-30-2002 |
烟花第３０部分：外壳 试验方法和规范 |
Fireworks - Part 30: Shells; Specification and test methods |
| prEN 14035-36-2002 |
烟花第３６部分：转轮式烟花 试验方法与规范 |
Fireworks - Part 36: Wheels; Specification and test methods |
| prEN 14035-6-2002 |
烟花第6部分：有色火焰 试验方法和规范 |
Fireworks - Part 6: Bengal flames; Specification and test methods |
| prEN 14035-7-2002 |
烟花第7部分：有色引线试验方法和规范 |
Fireworks - Part 7: Bengal matches; Specification and test methods |
| prEN 14035-8-2002 |
烟花第8部分：有色火管试验方法与规范 |
Fireworks - Part 8: Bengal sticks; Specification and test methods |
| prEN 14038-1-2000 |
钢筋混凝土的电化学再碱化及氯化物的萃取处理第1部分：再碱化 |
Electrochemical re-alkalisation and chloride extraction treatments for reinforced concrete - Part 1: Re-alkalisation |
| prEN 14039-2000 |
废弃物的特性用气相色谱分析法对C10-C40范围的碳氢化合物含量测定 |
Characterization of waste - Determination of hydrocarbon content in the range of C10 - C40 by gas chromatography |
| prEN 14041-2000 |
弹性的、纺织的和层压材料地毯卫生、安全和节能的技术要求 |
Resilient, textile and laminate floor coverings - Health, safety and energy-saving requirements |
| prEN 14043-2000 |
消防用的自动回转梯要求和试验方法 |
Automatic turntable ladders for fire service use - Requirements and test methods |
| prEN 14044-2000 |
消防用的半自动回转梯要求和试验方法 |
Semi-automatic turntable ladders for fire service use - Requirements and test methods |
| prEN 14049-2003 |
灌溉技术用水量计算原理和测试方法 |
Water application intensity - Calculation principles and measurement methods |
| prEN 14052-2002 |
高性能工业用安全盔的规范 |
High performance industrial helmets |
| prEN 14055-1-2000 |
公厕冲洗池第1部分：带内溢流和阀门排水口装置的冲洗池 |
WC flushing cisterns - Part 1: Flushing cisterns with internal overflow and valve outlet mechanism |
| prEN 14058-2003 |
防护服防寒服 |
Protective clothing - Garments for protection against cool environments |
| prEN 14063-1-2000 |
建筑物隔热产品现场制的膨胀粘土轻骨料产品第1部分：安装前疏松装填产品的规范 |
Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation |
| prEN 14063-2-2000 |
建筑物隔热产品现场制的膨胀粘土轻骨料产品第2部分：安装产品的规范 |
Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products |
| prEN 14064-1-2000 |
建筑物隔热产品现场制疏松填装矿棉的产品第1部分：安装前疏松填装产品的规范 |
Thermal insulation products for buildings - In-situ formed loose-fill mineral wool products - Part 1: Specification for the loose-fill products before installation |
| prEN 14064-2-2000 |
建筑物隔热产品现场制疏松填装矿棉的产品第2部分：安装产品的规范 |
Thermal insulation products for buildings - In-situ formed loose-fill mineral wool products - Part 2: Specification for the installed products |
| prEN 14068-2003 |
混凝土结构防护和维修用产品和系统试验方法混凝土中灌注缝隙防水性的测定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete |
| prEN 14069-2003 |
石灰描述和最低要求 |
Liming materials - Description and minimum requirements |
| prEN 14070-2003 |
机床的安全 专用机床和连续自动工作机床 |
Safety of machine tools - Transfer and special-purpose machines |
| prEN 14071-2000 |
液化石油气（LPG）罐的减压阀辅助设备 |
Pressure relief valves for LPG tanks - Ancillary equipment |
| prEN 14072-2003 |
家具用玻璃测试方法 |
Glass in furniture - Test methods |
| prEN 14073-2-2000 |
办公家具 储存家具 第2部分：安全性技术要求 |
Office furniture - Storage furniture - Part 2: Safety requirements |
| prEN 14073-3-2000 |
办公家具储存家具第3部分：结构的稳定性和强度测定的试验方法 |
Office furniture - Storage furniture - Part 3: Test methods for the determination of stability and strength of the structure |
| prEN 14074-2000 |
办公家具 桌椅和储存家具移动部件的强度和耐久性测定的试验方法 |
Office furniture - Tables and desks and storage furniture - Test methods for the determination of strength and durability of moving parts |
| prEN 14076-2000 |
木楼梯术语 |
Timber stairs - Terminology |
| prEN 14077-2003 |
石油产品有机卤素含量的测定氧化微库仑分析法 |
Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method |
| prEN 14078-2003 |
液化石油产品中间馏份中脂肪酸甲基酯（FAME）的测定红外光谱法 |
Liquid petroleum products - Determination of fatty acid methyl esters (FAME) in middle distillates - Infrared spectroscopy method |
| prEN 14080-2000 |
木结构胶合板要求 |
Timber structures - Glued laminated timber - Requirements |
| prEN 14081-1-2000 |
木结构具有矩形截面的按强度分级的结构用木材第1部分：一般要求 |
Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
| prEN 14081-2-2003 |
木结构具有矩形截面的按强度分级的结构用木材 第2部分：机械级配 固有类型试验的附加要求 |
Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; Additional requirements for initial type testing |
| prEN 14081-3-2000 |
木结构具有矩形截面的按强度分级的结构用木材第3部分：机械级配工厂生产管理的附加要求 |
Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading - Additional requirements for factory production control |
| prEN 14095-2003 |
建筑物内部的水质处理设备用铝阳极的电解配料系统试验、安全和性能的要求 |
Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance and safety, testing |
| prEN 141000-1993 |
通用规范：电位器 |
Generic specification: potentiometers |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com