标准号 |
中文名称 |
英文名称 |
| EN 61212-3-3-1995 |
电工用热固性树脂工业硬质圆形层压管和棒第3部分：单项材料规范活页3：圆形层压模制棒 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods (IEC 61212-3-3:1995) |
| EN 61213-1994 |
录像带的模拟声音录制磁化极性 |
Analogue audio recording on video tape-Polarity of magnetization (IEC 61213:1993) |
| EN 61215-1995 |
地面用晶体硅光伏组件设计鉴定和定型 |
Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval (IEC 61215:1993) |
| EN 61219-1993 |
带电作业 用挂杆作为短路装置的接地或接地并短路设备挂杆接地 |
Live working; earthing or earthing and short-circuiting equipment using lances as a short-circuiting device; lance earthing (IEC 61219:1993) |
| EN 61220-1995 |
超声学声场0.5MHz至15MHz频率范围内用水听器测量和表征医疗超声设备产生的超声场的指南 |
Ultrasonics - Fields - Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0,5 MHz to 15 MHz (IEC 61220:1993) |
| EN 61221-1995 |
石油产品和润滑剂三方基磷酸酯涡轮机控制液规范 |
Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (categorie ISO-L-TCD) - Specifications (IEC 61221:1993) |
| EN 61223-2-4-1994 |
医用成像部门的评定及例行试验第2-4部分：稳定性试验硬考贝照相机 |
Evaluation and routine testing in medical imaging departments - Part 2-4: Constancy tests - Hard copy cameras (IEC 61223-2-4:1994) |
| EN 61223-2-5-1994 |
医用成像部门的评定及例行试验第2-5部分：稳定性试验图像显示装置 |
Evaluation and routine testing in medical imaging departments - Part 2-5: Constancy tests - Image display devices (IEC 61223-2-5:1994) |
| EN 61223-2-6-1994 |
医用成像部门的评定及例行试验第2-6部分：稳定性试验经过计算的断层摄影X-射线设备 |
Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - X-ray equipment for computed tomography (IEC 61223-2-6:1994) |
| EN 61223-3-1-1999 |
医用成像部门的评定及例行试验第3-1部分：验收试验X-射线摄影和X射线透视设备的图像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999) |
| EN 61223-3-2-1996 |
医用成像部门的评定及例行试验第3-2部分：验收试验乳腺摄影X-射线设备图像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996) |
| EN 61223-3-3-1996 |
医用成像部门的评定及例行试验第3-3部分：验收试验数字减影血管造影X-射线设备的图像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiography (DSA) (IEC 61223-3-3:1996) |
| EN 61223-3-4-2000 |
医用成像部门的评定及例行试验第3-4部分：验收试验牙科X射线设备的图像性能 |
Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance test- Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000) |
| EN 61234-1-1994 |
电气绝缘材料水解稳定性的试验方法第1部分：塑料薄膜 |
Method of test for the hydrolytic stability of electrical insulating materials- |
| EN 61234-2-1998 |
电气绝缘材料水解稳定性的试验方法第2部分：模塑热固性材料 |
Electrical insulating materials - Methods of test for the hydrolytic stability - Part 2: Moulded thermosets (IEC 61234-2:1997) |
| EN 61235-1995 |
带电作业电工用绝缘空心管 |
Live working - Insulating hollow tubes for electrical purposes (IEC 61235:1993, modified) |
| EN 61236-1995 |
带电作业用滑动座架、硬梯及附件 |
Saddles, pole clamps (stick clamps) and accessories for live working (IEC 61236:1993, modified) |
| EN 61237-1-1994 |
广播磁带录像机测量方法第1部分：机械测量 |
Broadcast video tape recorders - Methods of measurement - Part 1: Mechanical measurements (IEC 61237-1:1994) |
| EN 61237-2-1995 |
广播磁带录像机测量方法第2部分：模拟复合视频信号的电气测量 |
Broadcast video tape recorders - Methods of measurement - Part 2: Electrical measurements of analogue composite video signals (IEC 61237-2:1995) |
| EN 61237-3-1995 |
广播磁带录像机测量方法第3部分：模拟部件视频信号的电气测量 |
Methods of measurement for broadcast video tape recorders - Part 3: Electrical measurements for analogue component video signals (IEC 61237-3:1995) |
| EN 61237-4-1997 |
广播磁带录像机测量方法第4部分：模拟音频性能测量 |
Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements (IEC 61237-4:1997) |
| EN 61238-1-2003 |
标准号： |
中文标题： |
| EN 61240-1997 |
压电器件频率控制和选择用表面安装器件外形图制备总则 |
Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules (IEC 61240:1994) |
| EN 61241-1-2004 |
有可燃性粉尘场合用电气设备.第1部分:外壳防护tD型 |
|
| EN 61241-14-2004 |
有可燃性粉尘场合用电气设备.第14部分:选择和安装 |
|
| EN 61241-18-2004 |
有可燃性粉尘场合用电气设备.第18部分:封装mD型防护设备 |
|
| EN 61241-2-2-1995 |
有可燃性粉尘场合用电气设备第2部分：试验方法第2节：粉尘层电阻率的测定方法 |
Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers (IEC 61241-2-2:1993 + Corrigendum 1994) |
| EN 61242-1997 |
电气附件家用和类似用途卷线盘 |
Electrical accessories - Cable reels for household and similar purposes (IEC 61242:1995, modified) |
| EN 61242-2004 |
电气附件.家用和类似用途卷线盘 |
|
| EN 61242/prA11-2002 |
电气附件家用和类似用途卷线盘修改A11 |
Electrical accessories - Cable reels for household and similar purposes; Amendment A11 |
| EN 61243-3-1998 |
带电作业电压检测器第3部分：两极低压型 |
Live working - Voltage detectors - Part 3: Two-pole low voltage type (IEC 61243-3:1998) / Note: Includes Corrigendum of February 2002 |
| EN 61243-5-2001 |
带电作业电压检测器第5部分：电压检测系统 |
Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) (IEC 61243-5:1997, modified) |
| EN 61247-1997 |
磁性氧化物制PM磁芯及相关部件尺寸 |
PM-cores made of magnetic oxides and associated parts - Dimensions (IEC 61247:1995) |
| EN 61248-1-1997 |
电子和电信设备用变压器和电感器第1部分：通用规范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification (IEC 61248-1:1996) |
| EN 61248-2-1997 |
电子和电信设备用变压器和电感器第2部分：采用能力批准程序的信号变压器分规范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure (IEC 61248-2:1996) |
| EN 61248-3-1997 |
电子和电信设备用变压器和电感器第3部分：采用能力批准程序的电源变压器分规范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure (IEC 61248-3:1996) |
| EN 61248-4-1997 |
电子和电信设备用变压器和电感器第4部分：采用能力批准程序的转换供电方式(SMPS)的开关电源变压器分规范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure (IEC 61248-4:1996) |
| EN 61248-5-1997 |
电子和电信设备用变压器和电感器第5部分：采用能力批准程序的脉冲变压器分规范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure (IEC 61248-5:1996) |
| EN 61248-6-1997 |
电子和电信设备用变压器和电感器第6部分：采用能力批准程序的电感器分规范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure (IEC 61248-6:1996) |
| EN 61248-7-1997 |
电子和电信设备用变压器和电感器第7部分：采用能力批准程序的高频电感器和中频变压器分规范 |
Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure (IEC 61248-7:1997) |
| EN 61249-2-10-2003 |
印制板和其它互连结构用材料第2-10部分：包被和非包被增强基材阻燃型铜包被的氰酸酯、溴化环氧改进型或 |
Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials, clad and unclad; Cyanate ester, brominated epoxide modified or unmodified woven E-glass reinforced laminated sheets of defined flammability (vertica |
| EN 61249-2-12-1999 |
印制板和其它互连结构材料第2-12部分：包被和非包被增强基材分规范集阻燃型铜包被的非编织芳香聚酰胺层 |
Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper clad (IEC 61249-2-12:1999) |
| EN 61249-2-13-1999 |
印制板和其它互连结构材料第2-13部分：包被和非包被增强基材分规范集阻燃性铜包被的非编织芳香聚酰胺层 |
Materials for printed boards and other interconnecting structures - Part 2-13: Sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of defined flammability, copper clad (IEC 61249-2-13:1999) |
| EN 61249-2-18-2002 |
印制板和其它互连结构材料第2-18部分：包被和非包被增强基材阻燃型(垂直燃烧试验)铜包被的非编织玻璃 |
Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad; Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2 |
| EN 61249-2-19-2002 |
印制板和其它互连结构用材料第2-19部分：包被和非包被增强基材阻燃型(垂直燃烧试验)铜包被的交叉帘布 |
Materials for printed boards and other interconnection structures - Part 2-19: Reinforced base materials, clad and unclad; Epoxide cross-plied linear fibreglass-reinforced laminated sheet of defined flammability (vertical burning test), copper-clad (IEC |
| EN 61249-2-4-2002 |
印制板和其它互连结构用材料第2-4部分：包被和非包被增强基材阻燃型(垂直燃烧试验)铜包被的聚酯非编织/ |
Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad; Polyester non-woven/woven fiberglass laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2-4:200 |
| EN 61249-2-7-2002 |
印制板和其它互连结构用材料第2-7部分：包被和非包被增强基材阻燃型(垂直燃烧试验)铜包被的编织E-玻璃 |
Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad; Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2-7:2002) / Note: Endor |
| EN 61249-2-8-2003 |
印制板和其它互连结构用材料第2-8部分：包被和非包被增强基材阻燃铜包被改进型溴化环氧编织玻璃纤维增 |
Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad; Modified brominated epoxide woven fiberglass reinforced laminated sheets of defined flammability (vertical burning test), copper-cla |
| EN 61249-2-9-2003 |
印制板和其它互连结构用材料第2-9部分：包被和非包被增强基材阻燃铜包被二顺丁烯二酰亚胺/三连氮改进型 |
Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad; Bismaleimide/triazine modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical bu |
| EN 61249-3-3-1999 |
印制板和其它互连结构材料第3-3部分：包被和非包被非增强基材分规范集粘着的涂覆挠性聚酯薄膜 |
Materials for printed boards and other interconnecting structures - Part 3-3: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyester film (IEC 61249-3-3:1999 |
| EN 61249-3-4-1999 |
印制板和其它互连结构材料第3-4部分：包被和非包被非增强基材分规范集粘着的涂覆挠性聚酰亚胺薄膜 |
Materials for printed boards and other interconnecting structures - Part 3-4: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Adhesive coated flexible polyimide film (IEC 61249-3-4:1999 |
| EN 61249-3-5-1999 |
印制板和其它互连结构材料第3-5部分：包被和非包被非增强基材分规范集转换粘性薄膜 |
Materials for printed boards and other interconnecting structures - Part 3-5: Sectional specification set for unreinforced base materials, clad and unclad (intended for flexible printed boards) - Transfer adhesive films (IEC 61249-3-5:1999) |
| EN 61249-5-1-1996 |
互连结构用材料第5部分：有和无涂层的导电箔和薄膜分规范集第1节：铜箔(用于生产覆铜基材) |
Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacturer of copper-clad base materials) (IEC 61249-5-1:1995) |
| EN 61249-5-4-1996 |
互连结构用材料第5部分：有或无涂层的导电箔和薄膜分规范集第4节：导电油墨 |
Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 4: Conductive inks (IEC 61249-5-4:1996) |
| EN 61249-7-1-1995 |
互连结构用材料第7部分：增强芯材料分规范集第1节：铜/因瓦/铜 |
Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials - Section 1: Copper/Invar/copper (IEC 61249-7-1:1995) |
| EN 61249-8-7-1996 |
互连结构用材料第8部分：非导电薄膜和涂层分规范集第7节：打印油墨 |
Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks (IEC 61249-8-7:1996) |
| EN 61249-8-8-1997 |
互连结构用材料第8部分：非导电薄膜和涂层分规范集第8节：非永久高聚物涂层 |
Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 8: Temporary polymer coatings (IEC 61249-8-8:1997) |
| EN 61254-1994 |
家用电动剃须刀性能测试方法 |
Electric shavers for household use; methods for measuring the performance (IEC 61254:1993) |
| EN 61255-1994 |
家用电热垫性能测量方法 |
Household electric heating pads - Methods for measuring performance (IEC 61255:1994) |
| EN 61260-1995 |
电声学分倍频程和频程频带滤波器 |
Electroacoustics - Octave-band and fractional-octave-band filters (IEC 61260:1995) |
| EN 61262-1-1994 |
医疗电气设备光电X-射线影像增强器特性第1部分：入射野的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 1: Determination of the entrance field size (IEC 61262-1:1994) |
| EN 61262-2-1994 |
医疗电气设备光电X-射线影像增强器特性第2部分：换算因子的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 2: Determination of the conversion factor (IEC 61262-2:1994) |
| EN 61262-3-1994 |
医疗电气设备光电X-射线影像增强器特性第3部分：亮度分布及非均匀性测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994) |
| EN 61262-4-1994 |
医疗电气设备光电X-射线影像增强器特性第4部分：影像畸变的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4: Determination of the image distortion (IEC 61262-4:1994) |
| EN 61262-5-1994 |
医疗电气设备光电X-射线影像增强器特性第5部分：次量子系统的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency (IEC 61262-5:1994) |
| EN 61262-6-1994 |
医疗电气设备光电X-射线影像增强器特性第6部分：对比度及伪影系数的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index (IEC 61262-6:1994) |
| EN 61262-7-1995 |
医疗电气设备光电X-射线影像增强器特性第7部分：调制传递函数的测定 |
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the modulation transfer function (IEC 61262-7:1995) |
| EN 61265-1995 |
电声学航空噪声测量仪器在运输机噪声鉴定中测量三分之一宽带倍频声压级装置的性能要求 |
Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes (IEC 61265:1995) |
| EN 61266-1995 |
超声学手持探头式多普勒胎儿心音探测仪性能要求、测量方法和报告 |
Ultrasonics - Hand-held probe Doppler foetal heartbeat detectors - Performance requirements and methods of measurement and reporting (IEC 61266:1994) |
| EN 61267-1994 |
医用诊断X射线设备测定特性用辐射条件 |
Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics (IEC 61267:1994) |
| EN 61269-1-1-1997 |
光纤端接装置第1-1部分：空白详细规范 |
Fibre optic terminus sets - Part 1-1: Blank detail specification (IEC 61269-1-1:1994) |
| EN 61269-1-1997 |
光纤端接装置第1部分：通用规范 |
Fibre optic terminus sets - Part 1: Generic specification (IEC 61269-1:1994) |
| EN 61270-1-1996 |
微波炉用电容器第1部分：总则 |
Capacitors for microwave ovens - Part 1: General (IEC 61270-1:1996) |
| EN 61274-1-1-1997 |
光纤转接器第1-1部分：空白详细规范 |
Fibre optic adaptors - Part 1-1: Blank detail specification (IEC 61274-1-1:1994) |
| EN 61274-1-1997 |
光纤转接器第1部分：通用规范 |
Fibre optic adaptors - Part 1: Generic specification (IEC 61274-1:1994) |
| EN 61277-1998 |
地面用光伏发电系统总则和指南 |
Terrestrial photovoltaic (PV) power generating systems - General and guide (IEC 61277:1995) |
| EN 61280-1-1-1998 |
光纤通信子系统基本试验程序第1-1部分：一般通信子系统试验程序单模光缆发射器光输出功率的测量 |
Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable (IEC 61280-1-1:1998) |
| EN 61280-1-3-1999 |
光纤通信子系统基本试验程序第1-3部分：一般通信子系统试验程序中心波长和谱宽测量 |
Fibre optic communication subsystem basic test procedures - Part 1-3: Test procedures for general communication subsystems - Central wavelength and spectral width measurement (IEC 61280-1-3:1998) |
| EN 61280-1-4-2003 |
光纤通信子系统试验程序第1-4部分：一般通信子系统多模纤维激光发射机的双维近场数据的收集和整理 |
Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters (IEC 61280-1-4:2003) / Note: Endorsement notice |
| EN 61280-2-1-1999 |
光纤通信子系统基本试验程序第2-1部分：数字系统试验程序接收器灵敏度和过载测量 |
Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures for digital systems - Receiver sensitivity and overload measurement (IEC 61280-2-1:1998) |
| EN 61280-2-2-1999 |
光纤通信子系统基本试验程序第2-2部分：数字系统试验程序光眼图、波形和消光比 |
Fibre optic communication subsystem basic test procedures - Part 2-2: Test procedures for digital systems - Optical eye pattern, waveform, and extinction ratio (IEC 61280-2-2:1998) |
| EN 61280-2-4-1998 |
光纤通信子系统基本试验程序第2-4部分：数字系统试验程序比特率容差测量 |
Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures for digital systems - Bit-rate tolerance measurement (IEC 61280-2-4:1998) |
| EN 61280-2-5-1998 |
光纤通信子系统基本试验程序第2-5部分：数字系统试验程序抖动转移功能测量 |
Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems - Jitter transfer function measurement (IEC 61280-2-5:1998) |
| EN 61280-2-8-2003 |
光纤通信子系统试验程序数字系统第2-8部分：用Q系数测量法测定低BER |
Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements (IEC 61280-2-8:2003) / Note: Endorsement notice |
| EN 61280-2-9-2002 |
光纤通信子系统试验程序第2-9部分：数字系统稠密波长分割度多路系统光学信号-噪声系数测量 |
Fibre optic communication subsystem test procedures - Part 2-9: Digital systems; Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems (IEC 61280-2-9:2002) / Note: Endorsement notice |
| EN 61280-4-1-2004 |
光纤通信子系统试验程序.第4部分:电缆设备和链接.多模光纤电缆设备衰减测量 |
|
| EN 61280-4-2-1999 |
光纤通信子系统基本试验程序第4-2部分：光缆设施单模光缆设施衰减 |
Fibre optic communication subsystem basic test procedures - Part 4-2: Fibre optic cable plant - Single-mode fibre optic cable plant attenuation (IEC 61280-4-2:1999) |
| EN 61281-1-1999 |
光纤通信子系统通用规范 |
Fibre optic communication subsystems - Part 1: Generic specification (IEC 61281-1:1999) |
| EN 61284-1997 |
架空线路安装要求和试验 |
Overhead lines - Requirements and tests for fittings (IEC 61284:1997) |
| EN 61285-1994 |
工业过程控制分析器罩的安全 |
Industrial-process control - Safety of analyser houses (IEC 61285:1994 + Corrigendum 1994) |
| EN 61286-2002 |
信息技术起草用于电工及信息交换文件的编码图形文字集 |
Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange (IEC 61286:2001, modified) / Note: Endorsement notice |
| EN 61290-1-1-1998 |
光纤放大器基本规范第1-1部分：增益参数的试验方法光谱分析仪 |
Optical fibre amplifiers - Basic specification - Part 1-1: Test methods for gain parameters - Optical spectrum analyzer (IEC 61290-1-1:1998) |
| EN 61290-1-2-1998 |
光纤放大器基本规范第1-2部分：增益参数的试验方法电频谱分析仪 |
Optical fibre amplifiers - Basic specification - Part 1-2: Test methods for gain parameters - Electrical spectrum analyzer (IEC 61290-1-2:1998) |
| EN 61290-1-3-1998 |
光纤放大器基本规范第1-3部分：增益参数的试验方法光功率计 |
Optical fibre amplifiers - Basic specification - Part 1-3: Test methods for gain parameters - Optical power meter (IEC 61290-1-3:1998) |
| EN 61290-10-1-2003 |
光学放大器试验方法第10-1部分：多路参数使用光学转换开关和光谱分析仪的脉冲法 |
Optical amplifiers - Test methods - Part 10-1: Multichannel parameters; Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2003) / Note: Endorsement notice |
| EN 61290-10-2-2003 |
光学放大器试验方法第10-2部分：多路参数使用选通光谱分析仪的脉冲法 |
Optical amplifiers - Test methods - Part 10-2: Multichannel parameters; Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2003) / Note: Endorsement notice |
| EN 61290-10-3-2003 |
光学放大器试验方法第10-3部分：多路参数探针法 |
Optical amplifiers - Test methods - Part 10-3: Multichannel parameters; Probe methods (IEC 61290-10-3:2002) / Note: Endorsement notice |
| EN 61290-11-1-2003 |
光学放大器试验方法第11-1部分：偏振模式传播琼斯矩阵特征分析方法 (JME) |
Optical amplifier test methods - Part 11-1: Polarization mode dispersion; Jones matrix eigenanalysis method (JME) (IEC 61290-11-1:2003) / Note: Endorsement notice |
| EN 61290-2-1-1998 |
光纤放大器基本规范第2-1部分：光功率参数的试验方法光谱分析仪 |
Optical fibre amplifiers - Basic specification - Part 2-1: Test methods for optical power parameters - Optical spectrum analyzer (IEC 61290-2-1:1998) |
| EN 61290-2-2-1998 |
光纤放大器基本规范第2-2部分：光功率参数的试验方法电频谱分析仪 |
Optical fibre amplifiers - Basic specification - Part 2-2: Test methods for optical power parameters - Electrical spectrum analyzer (IEC 61290-2-2:1998) |
| EN 61290-2-3-1998 |
光纤放大器基本规范第2-3部分：光功率参数的试验方法光功率计 |
Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for optical power parameters - Optical power meter (IEC 61290-2-3:1998) |
| EN 61290-3-2-2003 |
光学放大器第3-2部分：噪声数字参数的试验方法电光谱分析仪法 |
Optical amplifiers - Part 3-2: Test methods for noise figure parameters; Electrical spectrum analyzer method (IEC 61290-3-2:2003) / Note: Endorsement notice*Applies only in conjunction with EN 61290-3 and EN 61291-1 |
| EN 61290-3-2000 |
光纤放大器基本规范第3部分：噪音数字参数的试验方法 |
Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters (IEC 61290-3:2000) |
| EN 61290-5-1-2000 |
光纤放大器基本规范第5-1部分：反射参数的试验方法光谱分析仪 |
Optical fibre amplifiers - Basic specification - Part 5-1: Test methods for reflectance parameters; Optical spectrum analyser (IEC 61290-5-1:2000) |
| EN 61290-5-2-2004 |
光学放大器.试验方法.第5-2部分:反射参数.电频谱分析仪法 |
|
| EN 61290-5-3-2002 |
光纤放大器基础规范第5-3部分：反射参数的试验方法用电光谱分析仪测定反射偏差 |
Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance using an electrical spectrum analyzer (IEC 61290-5-3:2002) |
| EN 61290-6-1-1998 |
光纤放大器基本规范第6-1部分：泵浦泄漏参数的试验方法光解复用器 |
Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer (IEC 61290-6-1:1998) |
| EN 61290-7-1-1998 |
光纤放大器基本规范第7-1部分：频带外插入损耗的试验方法滤波光功率计 |
Optical fibre amplifiers - Basic specification - Part 7-1: Test methods for out-of-band insertion losses - Filtered optical power meter (IEC 61290-7-1:1998) |
| EN 61291-1-1998 |
光纤放大器第1部分：通用规范 |
Optical fibre amplifiers - Part 1: Generic specification (IEC 61291-1:1998) |
| EN 61291-2-2000 |
光纤放大器第2部分：数字应用性能规范模板 |
Optical fibre amplifiers - Part 2: Digital applications; Performance specification template (IEC 61291-2:2000) |
| EN 61291-4-2003 |
光学放大器第4部分：多通道应用性能规范模板 |
Optical amplifiers - Part 4: Multichannel applications; Performance specification template (IEC 61291-4:2003) / Note: Endorsement notice |
| EN 61291-5-2-2002 |
光学放大器第5-2部分：鉴定规范光纤放大器可靠性鉴定 |
Optical amplifiers - Part 5-2: Qualification specifications; Reliability qualification for optical fibre amplifiers (IEC 61291-5-2:2002) / Note: Endorsement notice |
| EN 61293-1994 |
电气设备电源额定值的标记安全要求 |
Marking of electrical equipment with ratings related to electrical supply - Safety requirements (IEC 61293:1994) |
| EN 61297-1995 |
工业过程控制系统评定用自适应控制器的分类 |
Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation (IEC 61297:1995) |
| EN 61298-1-1995 |
过程测量和控制装置性能评定用一般方法和程序第1部分：一般考虑 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations (IEC 61298-1:1995) |
| EN 61298-2-1995 |
过程测量和控制装置性能评定用一般方法和程序第2部分：参考条件下的试验 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions (IEC 61298-2:1995) |
| EN 61298-3-1998 |
过程测量和控制装置性能评定用一般方法和程序第3部分：影响量作用的试验 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities (IEC 61298-3:1998) |
| EN 61298-4-1995 |
过程测量和控制装置性能评定用一般方法和程序第4部分：评定报告内容 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content (IEC 61298-4:1995) |
| EN 61300-1-1997 |
光纤互连器件和无源件基本试验和测量程序第1部分：总则和指南 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance (IEC 61300-1:1995) |
| EN 61300-2-1-2003 |
光纤互连器件和无源件基本试验和测量程序第2-1部分：试验振动(正弦) |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests; Vibration (sinusoidal) (IEC 61300-2-1:2003) / Note: Endorsement notice |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com