标准号 |
中文名称 |
英文名称 |
| EN 24501-1993 |
硬质合金 钛含量的测定 过氧化物光度法 |
Hardmetals - Determination of titanium - Photometric peroxide method (ISO 4501:1978) |
| EN 24503-1993 |
硬质合金 用X射线荧光测定金属素的含量 熔化法 |
Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978) |
| EN 24505-1993 |
硬质合金 孔隙度和游离碳的金相测定 |
Hardmetals - Metallographic determination of porosity and uncombined carbon (ISO 4505:1978) |
| EN 24506-1993 |
硬质合金 压缩试验 |
Hardmetals; compression test (ISO 4506:1979) |
| EN 24565-1989 |
小艇 锚链 |
Small craft - Anchor chains (ISO 4565:1986) |
| EN 246-2003 |
卫生用水龙头 流速调节器通用规范 |
Sanitary tapware - General specifications for flow rate regulators |
| EN 24641-1993 |
给水和排水用橡胶软管 规范 |
Rubber hoses for water and discharge; specification (ISO 4641:1991) |
| EN 247-1997 |
热交换器 术语 |
Heat exchangers - Terminology |
| EN 24766-1992 |
开槽平端紧定螺钉 |
Slotted set screws with flat point (ISO 4766:1983) |
| EN 248-2002 |
卫生用水龙头 镍铬电镀层通用技术规范 |
Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr |
| EN 24829-1-1990 |
钢和铸铁 全硅量的测定 硅钼蓝分光光度法 第1部分：硅含量在0.05-1.0之间 |
Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method; part 1: silicon content between 0.05 and 1 % |
| EN 24829-2-1990 |
钢和铸铁 全硅量的测定 硅钼蓝分光光度法 第2部分：硅含量在0.01-0.05%之间 |
Steel and cast iron; determination of total silicon content; reduced molybdosilicate spectrophotometric method; part 2: silicon content between 0.01 and 0.05 % |
| EN 2484-1989 |
航空航天系列 图纸的缩微胶片 35mm缩微胶片穿孔卡 |
Aerospace series - Microfilming of drawings - Aperture card for 35 mm microfilm |
| EN 24869-1-1992 |
声学 护听器 第1部分：声衰减测量的主观法 |
Acoustics; hearing protectors; subjective method for the measurement of sound attentuation (ISO 4869-1:1990) |
| EN 24869-3-1993 |
声学 听力器 第3部分：质量检验用耳罩式护听器插入损失测量的简易方法 |
Acoustics; Hearing protectors; Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes (ISO/TR 4869-3:1989) |
| EN 24883-1993 |
硬质合金 用X射线荧光测定金属素的含量 溶液法 |
Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method (ISO 4883:1978) |
| EN 24884-1993 |
硬质合金 用烧结试件进行粉未的取样和试验 |
Hardmetals; sampling and testing of powders using sintered test pieces (ISO 4884:1978) |
| EN 2489-1995 |
航空航天系列 纤维增强塑料 试验液体影响的测定 |
Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids |
| EN 2491-1997 |
航空航天系列 二硫化钼基上的干膜润滑油 涂层法 |
Aerospace series - Molybdenum disulphide dry lubricants - Coating methods |
| EN 24920-1992 |
纺织品 织物抗表面沾湿(喷淋试验)性的测定 |
Textiles; determination of resistance to surface wetting (spray test) of fabrics |
| EN 24934-1989 |
钢和铸铁 硫含量的测定 重量法 |
Steel and cast iron; determination of sulfur content; gravimetric method (ISO 4934, 1st edition 1980.10.01) |
| EN 24935-1991 |
钢和铁 硫含量的测定 感应炉内燃烧后红外线吸收法 |
Steel and iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace (ISO 4935:1989) |
| EN 24937-1990 |
钢和铁 铬含量的测定 电位或视觉滴定法 |
Steel and iron; determination of chromium content; potentiometric or visual method |
| EN 24938-1990 |
钢和铁 镍含量的测定 重量法或容量法 |
Steel and iron; determination of nickel content; gravimetric or titrimetric method |
| EN 24943-1990 |
黑色金属的化学分析 铜含量的测定 火焰原子吸收光谱法 |
Chemical analysis of ferrous metal; determination of copper content; flame atomic absorption spectrometric method |
| EN 24946-1990 |
钢和铸铁中铜含量的测定 |
Determination of copper content in steel and cast iron |
| EN 24947-1991 |
钢和铸铁 钒含量的测定 电位滴定法 |
Steel and cast iron; determination of vanadium content; potentiometric titration method (ISO 4947:1986) |
| EN 2495-1990 |
航空航天系列 温度补偿额定电流为25A及以下的单极电路断路器 产品标准 |
Aerospace series - Single-pole circuit breakers temperature compensated rated currents up to 25 A - Product standard |
| EN 2497-1989 |
航空航天系列 钛与钛合金干喷砂 |
Aerospace series - Dry abrasive blasting of titanium and titanium alloys |
| EN 2498-1990 |
航空航天系列 自润滑衬套和螺纹柄可自动调心普通轴承操纵杆端 尺寸和规范 |
Aerospace series; rod ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads |
| EN 2499-1987 |
航空航天系列 计算机输出缩微胶片（COM）A6缩微胶片 |
Aerospace series. Computer output microfiche (COM). A6 microfiche |
| EN 250-2000 |
呼吸设备 开路独立压缩空气潜水器具 要求、测试、标志 |
Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking |
| EN 25077-1993 |
纺织品 洗涤干燥后尺寸变化的测定 |
Textiles; determination of dimensional change in washing and drying (ISO 5077:1984) |
| EN 251-2003 |
淋浴槽 连接尺寸 |
Shower trays - Connecting dimensions |
| EN 2515-1990 |
航空航天系列 可调单叉和螺纹柄操纵杆端 尺寸和负荷 |
Aerospace series - Rod ends, adjustable single fork and threaded shank - Dimensions and loads |
| EN 2516-1997 |
航空航天系列 耐蚀钢钝化和镍基合金纯化 |
Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys |
| EN 25163-1993 |
汽车和航空燃料 爆震特性的测定 马达法 |
Motor and aviation-type fuels; determination of knock characteristics; motor method (ISO 5163:1990) |
| EN 25164-1993 |
发动机燃料 燃料的爆震特性的测定 研究法 |
Motor fuels; determination of knock characteristics; research method (ISO 5164:1990) |
| EN 25184-1994 |
电阻点焊直电极 |
Straight resistance spot welding electrodes (ISO 5184:1979) |
| EN 252-1989 |
测定与地面接触的木材防腐剂相关防护效果的野外试验方法 |
Field test method for determining the relative protective effectiveness of a wood preservative in ground contact |
| EN 25264-3-1994 |
纸浆 实验室打浆 第3部分：:约克罗(Jokro)磨法 |
Pulps - Laboratory beating - Part 3: Jokro mill method (ISO 5264-3:1979) |
| EN 253-2003 |
分区供暖管 直接掩埋热水网用预隔热连接的管道系统 成套钢铁管道设备的管组件、聚氨酯热绝缘和聚乙烯外覆 |
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
| EN 2536-1995 |
航空航天系列 铝合金的硬阳极氧化处理 |
Aerospace series - Hard anodizing of aluminium alloys |
| EN 2544-1987 |
航空航天系列 航空航天设备图纸上铆钉的表示法 |
Aerospace series - Representation of rivets on drawings for aerospace equipment |
| EN 2545-1-1995 |
航空航天系列 钛和钛合金再熔坯料和铸件 技术规范 第1部分：一般要求 |
Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 1: General requirements |
| EN 2545-2-1995 |
航空航天系列 钛和钛合金再熔坯料和铸件 技术规范 第2部分：再熔坯料 |
Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 2: Remelting stock |
| EN 2545-3-1995 |
航空航天系列 钛和钛合金制再熔坯料和铸件 技术条件 第3部分：预制铸件和产品铸件 |
Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 3: Pre-production and production castings |
| EN 2547-1987 |
航空航天系列 文件胶片 105mm缩微胶片(缩微胶片A6) |
Aerospace series - Filming of documents - Microfilm 105 mm (Microfiche A6) |
| EN 2549-1995 |
标准号： |
中文标题： |
| EN 255-1-1997 |
带电驱动压缩机的空调器、液体制冷设备和热力泵 加热方式 第1部分：术语、定义和标识 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 1: Terms, definitions and designations |
| EN 255-2-1997 |
带电驱动压缩机的空调器、液体制冷设备和热力泵 加热方式 第2部分：对空间加热装置作标志用测试和要求 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 2: Testing and requirements for marking for space heating units |
| EN 255-3-1997 |
带电驱动压缩机的空调器、液体制冷设备和热力泵 加热方式 第3部分：对卫生间热水装置作标志的测试和要求 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 3: Testing and requirements for marking for sanitary hot water units |
| EN 255-4-1997 |
带电驱动压缩机的空调器、液体制冷设备和热力泵 加热方式 第4部分：空间加热装置和卫生间热水装置的要求 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors - Heating mode - Part 4: Requirements for space heating and sanitary hot water units |
| EN 2557-1997 |
航空航天系列碳纤维预浸渍物单位面积质量的测定 |
Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area |
| EN 2558-1997 |
航空航天系列碳纤维预浸渍物挥发物含量测定 |
Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content |
| EN 25580-1992 |
无损检测 工业射线照相底片观光灯 最低要求 |
Non-destructive testing; Industrial radiographic illuminators; Minimum requirements (ISO 5580:1985) |
| EN 2559-1997 |
航空航天系列碳纤维预浸渍物树脂成分树脂和纤维含量及单位面积纤维质量的测定 |
Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area |
| EN 2560-1998 |
航空航天系列个人眼睛保护设备有可变遮避物或双层遮避物的焊接滤光镜 |
Aerospace series - Carbon fibre preimpregnates - Determination of the resin flow |
| EN 2561-1995 |
航空航天系列碳纤维增强塑料单向塑料层压制品纤维方向平行抗拉试验 |
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction |
| EN 2562-1997 |
航空航天系列碳纤维增强塑料单向层压塑料与纤维方向平行的弯曲试验 |
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction |
| EN 2563-1997 |
航空航天系列碳纤维增强塑料单向层压板层间表面剪切强度的测定 |
Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength |
| EN 2564-1998 |
航空航天系列碳纤维叠层板材纤维、树脂含量和空隙率的测定 |
Aerospace series - Carbon fibre laminates - Determination of the fibre, resin and void contents |
| EN 25663-1993 |
水质 凯氏氮的测定 加硒矿化作用法 |
Water quality; Determination of Kjeldahl nitrogen; Method after mineralization with selenium (ISO 5663:1984) |
| EN 25667-1-1993 |
水质 取样 第1部分：采样方案设计指南 |
Water quality; Sampling; Part 1: Guidance on the design of sampling programmes (ISO 5667-1:1980) |
| EN 25667-2-1993 |
水质 取样 第2部分：采样技术指南 |
Water quality; Sampling; Part 2: Guidance on sampling techniques (ISO 5667-2:1991) |
| EN 2569-1991 |
航空航天系列控制钢索配件和转筒技术规范 |
Aerospace series; control cable fittings and turnbarrels; technical specification |
| EN 257-1992 |
燃气器具用机械恒温器 |
Mechanical thermostats for gas-bruning appliances |
| EN 2570-1996 |
航空航天系列镍镉电池技术规范 |
Aerospace series - Nickel-cadmium batteries - Technical specification |
| EN 2574-1990 |
航空航天系列焊接规范制图资料 |
Aerospace series; welds; information on drawings |
| EN 2575-1989 |
航空航天系列文件摄影规范16mm缩微胶片 |
Aerospace series; filming of documents; 16 mm microfilm |
| EN 25754-1993 |
烧结金属材料 不包括硬质金属 无切口冲击试样 |
Sintered metal materials, excluding hardmetals; unnotched impact test piece (ISO 5754:1978) |
| EN 25813-1992 |
水质 溶解氧的测定 碘量法 |
Water quality; Determination of dissolved oxygen; Iodometric method (ISO 5813:1983) |
| EN 25814-1992 |
水质 容解氧的测定 电化学探头法 |
Water quality; Determination of dissolved oxygen; Electrochemical probe method (ISO 5814:1990) |
| EN 25817-1992 |
钢弧焊接头 缺点质量分级指南 |
Arc-welded joints in steel; guidance on quality levels for imperfections (ISO 5817:1992) |
| EN 25821-1991 |
电阻点焊电极帽接头 |
Resistance spot welding, electrode caps (ISO 5821:1979) |
| EN 25822-1991 |
点焊设备 锥形塞规和环规 |
Spot welding equipment- Taper plug gauges and taper ring gauges (ISO 5822:1988) |
| EN 25827-1992 |
点焊 电极座和电极夹 |
Spot welding- Electrode back-ups and clamps (ISO 5827:1983) |
| EN 2583-1997 |
航空航天系列NI-PH2601(铬镍铁合金718)耐热镍基合金MJ螺纹螺栓等级：1275MPa( 环境温度)/650℃技术规 |
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃ - Technical specification |
| EN 2584-2001 |
航空航天系列具有自润滑轴套的球面防腐钢轴承窄系列环境温度下的高负荷尺寸和负荷 |
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series; Elevated load at ambient temperature; Dimensions and loads |
| EN 2585-2001 |
航空航天系列具有自润滑轴套的球面防腐钢轴承宽系列环境温度下的高负荷尺寸和负荷 |
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series; Elevated load at ambient temperature; Dimensions and loads |
| EN 2586-1991 |
航空航天系列飞行驾驶杆用垫片、锁 尺寸 |
Aerospace series - Wwashers, lock for flight control rods - Dimensions |
| EN 2587-1990 |
航空航天系列可调螺纹柄操纵杆尺寸和负荷 |
Aerospace series - Rod ends, adjustable double fork and threaded shank - Dimensions and loads |
| EN 259-1-2001 |
卷式墙面饰层 重负载墙面饰层 第1部分：规范 |
Wallcoverings in roll form - Heavy duty wallcoverings - Part 1: Specifications |
| EN 259-2-2001 |
卷式墙面饰层 重负载墙面饰层 第2部分：冲击阻力的测定 |
Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance |
| EN 2591-101-1994 |
航空航天系列光电连接件试验方法第101部分：目视检查 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| EN 2591-1992 |
航空航天系列 光电连接件 试验方法 总则 |
Aerospace series; elements of electrical and optical connection; test methods; general |
| EN 2591-201-1996 |
航空航天系列光电连接件试验方法第201部分：接触电阻低级 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 201: Contact resistance - Low level |
| EN 2591-202-1996 |
航空航天系列光电连接件试验方法第202部分：额定电流时的接触电阻 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 202: Contact resistance at rated current |
| EN 2591-203-1996 |
航空航天系列光电连接件试验方法第203部分：微伏级时的电路连续性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 203: Electrical continuity at microvolt level |
| EN 2591-204-1996 |
航空航天系列光电连接件试验方法第204部分：在微秒内的中断接触 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 204: Discontinuity of contacts in the microsecond range |
| EN 2591-205-1996 |
航空航天系列光电连接件试验方法第205部分：屏蔽套电路连续性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 205: Housing (shell) electrical continuity |
| EN 2591-206-1996 |
航空航天系列光电连接件试验方法第206部分：绝缘电阻的测量 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 206: Measurements of insulation resistance |
| EN 2591-207-1996 |
航空航天系列光电连接件试验方法第207部分：电压校验 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 207: Voltage proof test |
| EN 2591-208-1996 |
航空航天系列光电连接件试验方法第208部分：由额定电流而造成的升温 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 208: Temperature rise due to rated current |
| EN 2591-209-1996 |
航空航天系列光电连接件试验方法第209部分：现行温度引起的额定值降低 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 209: Current temperature derating |
| EN 2591-210-1998 |
航空航天系列光电连接件试验方法第210部分：过电荷载 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Electrical overload |
| EN 2591-211-2002 |
航空航天系列光电连接件试验方法第211部分：电容 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 211: Capacitance |
| EN 2591-213-1997 |
航空航天系列光电连接件试验方法第213部分： 从100 MHz至 1 GHz屏蔽效率 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz |
| EN 2591-216-1997 |
航空航天系列光电连接件试验方法第216部分：.连接咬合深度 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 216: Engagement depth of contacts |
| EN 2591-217-2002 |
航空航天系列光电连接件试验方法第217部分：.在规定接线接片和在线接头电流内的电压降 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 217: Voltage drop under specified current for terminal lugs and in-line splices |
| EN 2591-218-2002 |
航空航天系列光电连接件试验方法第２１８部分：温度和电流循环变化使接线按片和在线接头引起老化 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling |
| EN 2591-219-2002 |
航空航天系列光电连接件试验方法第２１９部分：绝缘接线按片和在线接头电压强度 |
Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices |
| EN 2591-301-1996 |
航空航天系列光电连接件试验方法第301部分：温度耐受性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 301: Endurance at temperature |
| EN 2591-302-1997 |
航空航天系列光电连接件试验方法第302部分：气候关系 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 302: Climatic sequence |
| EN 2591-303-1997 |
航空航天系列光电连接件试验方法第303部分：.低温/低压和湿热 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 303: Cold/low pressure and damp heat |
| EN 2591-304-1997 |
航空航天系列光电连接件试验方法第304部分：稳态湿热 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 304: Damp heat steady state |
| EN 2591-305-1997 |
航空航天系列光电连接件试验方法第305部分：快速温度变化 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature |
| EN 2591-306-1998 |
航空航天系列光电连接件试验方法第306部分：长霉 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth |
| EN 2591-307-1998 |
航空航天系列光电连接件试验方法第307部分：盐雾 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| EN 2591-308-1998 |
航空航天系列光电连接件试验方法第308部分：沙尘和灰尘 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 308: Sand and dust |
| EN 2591-309-1997 |
航空航天系列光电连接件试验方法第309部分：干热 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 309: Dry heat |
| EN 2591-310-1998 |
航空航天系列光电连接件试验方法第310部分：低温 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 310: Cold |
| EN 2591-311-1997 |
航空航天系列光电连接件试验方法第311部分：低气压 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 311: Low air pressure |
| EN 2591-312-1997 |
航空航天系列光电连接件试验方法第312部分：漏气量 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage |
| EN 2591-313-1997 |
航空航天系列光电连接件试验方法第313部分：人工降雨 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 313: Artificial rain |
| EN 2591-314-1997 |
航空航天系列光电连接件试验方法第314部分：低气压浸入 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 314: Immersion at low air pressure |
| EN 2591-315-1998 |
航空航天系列光电连接件试验方法第315部分：流体阻力 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| EN 2591-316-1997 |
航空航天系列光电连接件试验方法第316部分：抗臭氧 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 316: Ozone resistance |
| EN 2591-317-1998 |
航空航天系列光电连接件试验方法第317部分：易燃性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 317: Flammability |
| EN 2591-318-1998 |
航空航天系列光电连接件试验方法第318部分：阻燃性 |
Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com