标准号 |
中文名称 |
英文名称 |
| EN 61105-1993 |
磁带录像机系统用参考带 |
Reference tapes for video tape recorder systems (IEC 61105:1991) |
| EN 61106-1993 |
视盘参数测量方法 |
Videodisks-Methods of measurements for parameters (IEC 61106:1993) |
| EN 61108-1-1996 |
全球导航卫星系统(GNSS)第1部分：全球定位系统(GPS)接收机设备性能标准、试验方法和要求的试验结果 |
Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS) - Receiver equipment - Performance standards, methods of testing and required test results (IEC 61108-1:1996) |
| EN 61108-2-1998 |
海上导航和无线电通讯设备和系统全球导航卫星系统(GNSS)第2部分：全球导航卫星系统(GLONASS)接收设备 |
Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test result |
| EN 61108-4-2004 |
海上导航和无线电通信设备与系统.全球导航卫星系统(GNSS).第4部分:船载DGPS和DGLONASS海上无线电信号接收设备.性能要求、试验方法和要求的试验结果 |
|
| EN 61110-1992 |
船用奥米伽系统和差奥米伽接收机操作和性能要求试验方法和要求的试验结果 |
System Omega and differential Omega receivers for ships; operational and performance requirements; methods of testing and required test results (IEC 61110:1992) |
| EN 61114-1-1999 |
11/12 GHz频带卫星广播传输接收天线第1部分：电气测量 |
Receiving antennas for satellite broadcast transmissions in the 11/12 GHz band - Part 1: Electrical measurements (IEC 61114-1:1999) |
| EN 61114-2-1996 |
11/12 GHz频带卫星广播传输接收天线的测量方法第2部分：个人用及公用接收天线的机械和环境试验 |
Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band - Part 2: Mechanical and environmental tests on individual and collective receiving antennas (IEC 61114-2:1996) |
| EN 61115-1993 |
过程分析器试样处理系统性能表示 |
Expression of performance of sample handling systems for process analyzers (IEC 61115:1992) |
| EN 61116-1994 |
小型水电站机电设备安装指南 |
Electromechanical equipment guide for small hydroelectric installations (IEC 61116:1992) |
| EN 61118-1993 |
用12.65mm(0.5 in)磁带的螺旋扫描盒式磁带录像系统M2型 |
Helical-scan video tape cassette using 12,65 mm (0,5 in) magnetic tape-Type M2 (IEC 61118:1993) |
| EN 61119-1-1994 |
数字音频盒式磁带系统(DAT)第1部分：尺寸和特性 |
Digital Audio Tape cassette system (DAT) - Part 1: Dimensions and characteristics (IEC 61119-1:1992) |
| EN 61119-2-1994 |
数字音频盒式磁带系统(DAT)第2部分：DAT校正磁带 |
Digital Audio Tape cassette system (DAT) - Part 2: DAT calibration tape (IEC 61119-2:1991) |
| EN 61119-3-1994 |
数字音频盒式磁带系统(DAT)第3部分：DAT磁带性能 |
Digital audio tape cassette system (DAT) - Part 3: DAT tape properties (IEC 61119-3:1992) |
| EN 61119-5-1995 |
数字音频盒式磁带系统(DAT)第5部分：专业用数字音频盒式磁带系统 |
Digital audio tape cassette system (DAT) - Part 5: DAT for professional use (IEC 61119-5:1993) |
| EN 61119-6-1994 |
数字音频盒式磁带系统(DAT)第6部分：系列复制管理系统 |
Digital audio tape cassette system (DAT) - Part 6: Serial copy management system (IEC 61119-6:1992) |
| EN 61120-2-1993 |
专业用6.3mm磁带的数字音频盘式磁带盘录音系统第2部分：格式A |
Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use-Part 2: Format A (IEC 61120-2:1991) |
| EN 61120-3-1993 |
专业用6.3mm磁带的数字音频盘式磁带盘录音系统第3部分：格式B |
Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use-Part 3: Format B (IEC 61120-3:1991) |
| EN 61120-4-1992 |
专业用6.3mm磁带的数字音频盘式磁带盘录音系统第4部分：磁带性能：定义和测量方法 |
Digital audio tape recorder; reel-to-reel system, using 6,3 mm magnetic tape, for professional use; part 4: magnetic tape properties: definitions and methods of measurement (IEC 61120-4:1992) |
| EN 61120-5-1995 |
专业用6.3mm磁带的数字音频盘式磁带盘录音系统第5部分：带盘 |
Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use - Part 5: Reels (IEC 61120-5:1995) |
| EN 61122-1993 |
静止视频软盘磁性录制系统 |
Still video floppy disk magnetic recording system (IEC 61122:1992) |
| EN 61125-1993 |
未使用过的烃基绝缘液体评定氧化稳定性的试验方法 |
Unused hydrocarbon-based insulating liquids - test methods for evaluating the oxidation stability (IEC 61125:1992 + Corrigendum 1992) |
| EN 61131-1-2003 |
可编程控制器第1部分：一般资料 |
Programmable controllers - Part 1: General information (IEC 61131-1:2003) / Note: Endorsement notice |
| EN 61131-2-2003 |
可编程控制器第2部分：设备要求和试验 |
Programmable controllers - Part 2: Equipment requirements and tests (IEC 61131-2:2003) / Note: Endorsement notice |
| EN 61131-3-2003 |
可编程控制器第3部分：编程语言 |
Programmable controllers - Part 3: Programming languages (IEC 61131-3:2003) / Note: Endorsement notice |
| EN 61131-5-2001 |
可编程控制器第5部分：通信 |
Programmable controllers - Part 5: Communications (IEC 61131-5:2000) |
| EN 61131-7-2000 |
可编程控制器第7部分：模糊控制编程 |
Programmable controllers - Part 7: Fuzzy control programming (IEC 61131-7:2000) |
| EN 61135-1994 |
台卡导航系统船用接收机最低性能标准试验方法和要求的试验结果 |
Decca navigator system: Receivers for ships - Minimum performance standards -Methods of testing and required test results (IEC 61135:1992) |
| EN 61136-1-1995 |
半导体电力变流器可调速电气传动系统一般要求第1部分：特别是对直流电动机传动的定额规范 |
Semiconductor power convectors - Adjustable speed electric drive systems - General requirements - Part 1: Rating specifications, particularly for d.c. motor drives (IEC 61136-1:1992, modified) |
| EN 61140-2002 |
电击防护设施和设备的共同方面 |
Protection against electric shock - Common aspects for installation and equipment (IEC 61140:2001) |
| EN 61143-2-1994 |
电气测量仪表X-t记录仪第2部分：推荐的附加试验方法 |
Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods (IEC 61143-2:1992) |
| EN 61144-1993 |
测定绝缘液体氧指数的试验方法 |
Test method for the determination of oxygen index of insulating liquids (IEC 61144:1992) |
| EN 61146-1-1996 |
摄像机(PAL/SECAM/NTSC)测量方法第1部分：非广播单传感器摄像机 |
Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 1: Non-broadcast single-sensor cameras (IEC 61146-1:1994) |
| EN 61146-2-1997 |
摄像机(PAL/SECAM/NTSC)测量方法第2部分：两个和三个传感器的专业摄影机 |
Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 2: Two- and three-sensor professional cameras (IEC 61146-2:1997) |
| EN 61146-3-1997 |
摄影机(PAL/SECAM/NTSC)测量方法第3部分：非广播用摄像记录器 |
Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 3: Non-broadcast camera-recorders (IEC 61146-3:1997) |
| EN 61146-4-1998 |
摄影机(PAL/SECAM/NTSC)测量方法第4部分：摄影机和摄像记录器的自动功能 |
Video cameras (PAL/SECAM/NTSC) - Methodes of measurement - Part 4: Automatic functions of video cameras and camera-recorders (IEC 61146-4:1998) |
| EN 61150-1993 |
碱性二性电池和电池组密封镍镉扣式可充电整体电池组 |
Alkaline secondary cells and batteries - Sealed nickel-cadmium rechargeable monobloc batteries in button cell design (IEC 61150:1992 + corrigendum 1992) |
| EN 61152-1994 |
金属护套温度计件尺寸 |
Dimensions of metal-sheathed thermometer elements (IEC 61152:1992, modified) |
| EN 61157-1994 |
对医疗超声波诊断设备声输出的要求 |
Requirements for the declaration of the acoustic output of medical diagnostic ultrasonic equipment (IEC 61157:1992) |
| EN 61158-2-1994 |
工业控制系统用范围总线标准第2部分：物理层规范和服务定义 |
Fieldbus standard for use in industrial control systems; part 2: physical layer specification and service definition (IEC 61158-2:1993) |
| EN 61158-2/prA1-2000 |
工业控制系统用范围总线标准第2部分：物理层规范和服务定义修改prA1 |
Signal polarity requirements for wire media |
| EN 61158-3-2004 |
测量和控制用数字数据通信.工业控制系统用现场总线.第3部分:数据链路服务定义(IEC 61158-3-2003) |
|
| EN 61158-4-2004 |
测量和控制用数字数据通信.工业控制系统用现场总线.第4部分:数据链路协议规范 |
|
| EN 61158-5-2004 |
测量和控制用数字数据通信.工业控制系统用现场总线.第5部分:应用层服务定义 |
|
| EN 61158-6-2004 |
测量和控制用数字数据通信.工业控制系统用通信总线.第6部分:应用层协议规范 |
|
| EN 61162-1-2000 |
海上导航和无线电通信设备及系统数字接口第1部分：单通话器和多受话器 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners (IEC 61162-1:2000) |
| EN 61162-2-1998 |
海上导航和无线电通信设备及系统数字接口第2部分：单通话器和多受话器、高速传输 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission (IEC 61162-2:1998) |
| EN 61162-400-2002 |
海上导航和无线电通信设备及系统数字接口第400部分：多能话器和多受话器船用系统互连介绍和一般原 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 400: Multiple talkers and multiple listeners; Ship systems interconnection; Introduction and general principles (IEC 61162-400:2001) / Note: Endorsement notice |
| EN 61162-401-2002 |
海上导航和无线电通信设备及系统数字接口第401部分：多能话器和多受话器船用系统互连应用轮廓 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 401: Multiple talkers and multiple listeners; Ship systems interconnection; Application profile (IEC 61162-401:2001) |
| EN 61162-410-2002 |
海上导航和无线电通信设备及系统数字接口第401部分：多能话器和多受话器船用系统互连传输轮廓要求 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 410: Multiple talkers and multiple listeners; Ship systems interconnection; Transport profile requirements and basic transport profile (IEC 61162-410:2001) |
| EN 61162-420-2002 |
海上导航和无线电通信设备及系统数字接口第401部分：多能话器和多受话器船用系统互连相关标准要求 |
Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 420: Multiple talkers and multiple listeners; Ship systems interconnection; Companion standard requirements and basic companion standards (IEC 61162-420:2001) |
| EN 61164-2004 |
可靠性增长.统计试验和评估方法 |
|
| EN 61166-1993 |
高压交流断路器高压交流断路器抗地震性能验证指南 |
High-voltage alternating current circuit-breakers - Guide for seismic qualification of high-voltage alternating current circuit-breakers (IEC 61166:1993) |
| EN 61168-1994 |
放射治疗模拟机功能特性 |
Radiotherapy simulators - Functional performance characteristics (IEC 61168:1993) |
| EN 61169-1-1-1997 |
射频连接器第1-1部分：单个、多系列、双语空白详细规范 |
Radio-frequency connectors - Part 1-1: Single, multi-series, dual-language blank detail specification (IEC 61169-1-1:1996) |
| EN 61169-2-2001 |
射频连接器第2部分：分规范9.52型射频同轴连接器 |
Radio-frequency connectors - Part 2: Sectional specification; Radio frequency coaxial connectors of type 9,52 (IEC 61169-2:2001) |
| EN 61169-24-2001 |
射频连接器第24部分：分规范带有螺旋联接器、通常用于75Ω电缆分配系统(F型)的射频同轴连接器 |
Radio-frequency connectors - Part 24: Sectional specification; Radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable distribution systems (type F) (IEC 61169-24:2001) |
| EN 61169-31-1999 |
射频连接器第31部分：外导体内径为1.0mm(0.039in)的螺纹连接射频同轴连接器特性阻抗50Ω(1.0型) |
Radio frequency connectors - Part 31: RF coaxial connectors with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling - Characteristic impedance 50Ω (type 1,0) (IEC 61169-31:1999) |
| EN 61169-32-1999 |
射频连接器第32部分：外导体内径为1.85mm(0.072in)的螺纹连接射频同轴连接器特性阻抗50Ω(1.85型) |
Radio-frequency connectors - Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling - Characteristic impedance 50Ω (type 1,85) (IEC 61169-32:1999) |
| EN 61169-33-1997 |
射频连接器第33部分：BMA 系列射频连接器的分规范 |
Radio-frequency connectors - Part 33: Sectional specification for series BMA r.f. connectors (IEC 61169-33:1996) |
| EN 61169-36-1997 |
射频连接器第36部分：塔锁连接微小型射频同轴连接器的分规范特性阻抗50Ω(MCX型) |
Radio-frequency connectors - Part 36: Sectional specification for microminiature r.f. coaxial connectors with snap-on coupling - Characteristic impedance 50Ω (type MCX) (IEC 61169-36:1996) |
| EN 61173-1994 |
光电发电系统过压保护指南 |
Overvoltage protection for photovoltaic (PV) power generating systems - Guide (IEC 61173:1992) |
| EN 61174-2001 |
海上导航和无线电通信设备及系统电子流程图展示和信息系统(ECDIS)操作和性能要求、试验方法和要求的试 |
Maritime navigation and radiocommunication equipment systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results (IEC 61174:2001) / Note: Endorsement notice |
| EN 61175-1993 |
信号和连接代号 |
Designations for signals and connections (IEC 61175:1993) |
| EN 61176-1993 |
手持式市电供电的电动圆锯性能测试方法 |
Hand-held electric mains voltage operated circular saws; methods for measuring the performance (IEC 61176:1993) |
| EN 61179-1993 |
使用19mm磁带D2格式(NTSC、PAL、PAL-M)的螺旋扫描数字复合盒式录像系统 |
Helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M) (IEC 61179:1993) |
| EN 61180-1-1994 |
低压设备的高压试验技术第1部分：定义、试验和程序要求 |
High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements (IEC 61180-1:1992) |
| EN 61180-2-1994 |
低压设备的高压试验技术第2部分：试验设备 |
High-voltage test techniques for low-voltage equipment - Part 2: Test equipment (IEC 61180-2:1994) |
| EN 61181-1993 |
浸渍绝缘材料溶解气体分析(DGA)应用于电气设备的工厂试验 |
Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:1993) |
| EN 61183-1994 |
电声学声级计的无规定射声场及扩散声场的校正 |
Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters (IEC 61183:1994) |
| EN 61184-2004 |
卡口灯座 |
|
| EN 61185-1997 |
电源用磁氧化ETD芯尺寸 |
Magnetic oxide cores (ETD-cores) intended for use in power supply applications - Dimensions (IEC 61185:1992 + A1:1995) |
| EN 61187-1994 |
电气和电子测量设备文件 |
Electrical and electronic measuring equipment - Documentation (IEC 61187:1993, modified) |
| EN 61188-1-1-1997 |
印制电路板和印制电路板组件设计和使用第1-1部分：一般要求电子组件平整度情况 |
Printed boards and printed board assemblies - Design and use - Part 1-1: Generic requirements - Flatness considerations for electronic assemblies (IEC 61188-1-1:1997) |
| EN 61188-1-2-1998 |
印制电路板和印制电路板组件设计和使用第1-2部分：一般要求控制阻抗 |
Printed boards and printed board assemblies - Design and use - Part 1-2: Generic requirements - Controlled impedance (IEC 61188-1-2:1998) |
| EN 61188-5-1-2002 |
印制电路板和印制电路板组件设计和使用第5-1部分：附着(焊接/接合)的考虑通用要求 |
Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations; Generic requirements (IEC 61188-5-1:2002) / Note: Endorsement notice |
| EN 61188-5-2-2003 |
印制电路板和印制电路板组件设计和使用第5-2部分：附着(焊接/接合)的考虑分立件 |
Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) considerations; Discrete components (IEC 61188-5-2:2003) / Note: Endorsement notice |
| EN 61188-5-6-2003 |
印制电路板和印制电路板组件设计和使用第5-6部分：附着(焊接/接合)的考虑四边带有J导线的晶片载体 |
Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations; Chip carriers with J-leads on four sides (IEC 61188-5-6:2003) / Note: Endorsement notice |
| EN 61189-2/prA2-1998 |
电气材料、互连结构和组件的试验方法第2部分：互连结构用材料的试验方法修改2 |
Amendment 2 to IEC 61189-2: Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| EN 61189-3/prA2-1998 |
电气材料、互连结构和组件的试验方法第3部分：互连结构(印制电路板)的试验方法修改2 |
Amendment 2 to IEC 61189-3: Test methods for electrical materials, interconnection structures and assemblies - Part 3: Test methods for interconnection structures |
| EN 61190-1-1-2002 |
电子组件的附着材料第1-1部分：电子组件优质互连用焊剂的要求 |
Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly (IEC 61190-1-1:2002) / Note: Endorsement notice |
| EN 61190-1-2-2002 |
电子组件的附着材料第1-2部分：电子组件优质互连用焊膏的要求 |
Attachment materials for electronic assembly - Part 1-2: Requirements for solder pastes for high-quality interconnections in electronics assembly (IEC 61190-1-2:2002) / Note: Endorsement notice |
| EN 61190-1-3-2002 |
电子组件的附着材料第1-3部分：电焊用电级焊合金、熔解性及非熔解性焊料的要求 |
Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications (IEC 61190-1-3:2002) / Note: Endorsement notice |
| EN 61191-1-1998 |
印刷电路板组件第1部分：总规范使用表面安装和相关装配技术的焊接电气和电子组件的要求 |
Printed board assemblies - Part 1: Generic specification: Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies (IEC 61191-1:1998) |
| EN 61191-2-1998 |
印刷电路板组件第2部分：分规范表面安装焊接组件的要求 |
Printed board assemblies - Part 2: Sectional specification: Requirements for surface mount soldered assemblies (IEC 61191-2:1998) |
| EN 61191-3-1998 |
印刷电路板组件第3部分：分规范通孔安装焊接组件的要求 |
Printed board assemblies - Part 3: Sectional specification: Requirements for through-hole mount soldered assemblies (IEC 61191-3:1998) |
| EN 61191-4-1998 |
印刷电路板组件第4部分：分规范端点焊接组件的要求 |
Printed board assemblies - Part 4: Sectional specification: Requirements for terminal soldered assemblies (IEC 61191-4:1998) |
| EN 61192-1-2003 |
软焊电子组件的工艺要求第1部分：总则 |
Workmanship requirements for soldered electronic assemblies - Part 1: General (IEC 61192-1:2003) / Note: Endorsement notice |
| EN 61192-2-2003 |
软焊电子组件的工艺要求第2部分：表面安装组件 |
Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mounted assemblies (IEC 61192-2:2003) / Note: Endorsement notice |
| EN 61192-3-2003 |
软焊电子组件的工艺要求第3部分：穿孔安装组件 |
Workmanship requirements for soldered electronic assemblies - Part 3: Through-hole mount assemblies (IEC 61192-3:2002) / Note: Endorsement notice |
| EN 61192-4-2003 |
软焊电子组件的工艺要求第4部分：端点组件 |
Workmanship requirements for soldered electronic assemblies - Part 4: Terminal assemblies (IEC 61192-4:2002) / Note: Endorsement notice |
| EN 61193-1-2002 |
质量评定体系第1部分：印制电路板组件缺陷的登记和分析 |
Quality assessment systems - Part 1: Registration and analysis of defects on printed board assemblies (IEC 61193-1:2001) |
| EN 61194-1995 |
独立式光伏(PV)系统的特性参数 |
Characteristic parameters of stand-alone photovoltaic(PV) systems (IEC 61194:1992, modified) |
| EN 61195-1999 |
双端荧光灯安全规范 |
Double-capped fluorescent lamps - Safety specifications (IEC 61195:1999) |
| EN 61196-2-2003 |
射频电缆规范第2部分：聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范 |
Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation (IEC 61196-2:1995) / Note: Endorsement notice |
| EN 61196-3-1998 |
射频电缆第3部分：局域网用同轴电缆分规范 |
Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks (IEC 61196-3:1998) |
| EN 61196-3-2-1997 |
射频电缆第3-2部分：水平层布线数字通信用同轴电缆有效半径为185m、速率10Mb/s及以下的局域网用实心介 |
Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-2:1997) |
| EN 61196-3-3-1997 |
射频电缆第3-3部分：水平层布线数字通信用同轴电缆有效半径为185m、速率10Mb/s及以下的局域网用泡沫介 |
Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s (IEC 61196-3-3:1997) |
| EN 61196-4-2004 |
同轴通信电缆.第4部分:辐射电缆的分规范 |
|
| EN 61197-1994 |
绝缘油直线火焰蔓延使用玻璃纤维带的试验方法 |
Insulating liquids - Linear flame propagation - Test method using a glass-fibre tape (IEC 61197:1993) |
| EN 61198-1994 |
绝缘矿物油2-糠醛和有关化合物的测定方法 |
Mineral insulating oils - methods for the determination of 2-furfural and related compounds (IEC 61198:1993) |
| EN 61199-1999 |
单端荧光灯安全规范 |
Single-capped fluorescent lamps - Safety specifications (IEC 61199:1999) |
| EN 61202-1-2000 |
纤维光学隔离器第1部分：通用规范 |
Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2000) |
| EN 61203-1994 |
电工用合成有机酯设备中变压器酯类的维护指南 |
Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment (IEC 61203:1992) |
| EN 61204-3-2000 |
直流输出的低压电源装置第3部分：电磁兼容 |
Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2000) |
| EN 61204-6-2001 |
直流输出的低压电源装置第6部分：具有评估性能的低压电源装置的要求 |
Low-voltage power supplies, DC output - Part 6: Requirements for low-voltage power supplies of assessed performance (IEC 61204-6:2000) |
| EN 61205-1994 |
超声学牙齿除垢系统输出特性的测量和标示 |
Ultrasonics; Dental descaler systems; Measurement and declaration of the output characteristics (IEC 61205:1993) |
| EN 61206-1995 |
超声学连续波多普勒系统试验规程 |
Ultrasonics - Continuous-wave Doppler systems - Test procedures (IEC 61206:1993) |
| EN 61207-1-1994 |
气体分析器的性能表示第1部分：总则 |
Expression of performance of gas analyzers; part 1: general (IEC 61207-1:1994) |
| EN 61207-2-1994 |
气体分析器的性能表示第2部分：气体中的氧(利用高温电化学传感器) |
Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994) |
| EN 61207-3-2002 |
气体分析器性能表示第3部分：顺磁氧气分析器 |
Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002) / Note: Endorsement notice |
| EN 61207-3/prA1-1999 |
气体分析器性能表示第3部分：顺磁氧气分析器修改prA1 |
Amendment 1 to IEC 61207-3: Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| EN 61207-6-1994 |
气体分析器的性能表示第6部分：光度分析器 |
Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994) |
| EN 61208/prA1-1994 |
电气测量仪器X-Y记录器修改prA1 |
Electrical measuring instruments - X-Y recorders |
| EN 61209-1999 |
海上导航和无线电通信设备及系统集成桥系统(IBS)操作和性能要求、试验方法和要求的试验结果 |
Maritime navigation and radiocommunication equipment and systems - Integrated Bridge Systems (IBS) - Operational and performance requirements, methods of testing and required test results (IEC 61209:1999) |
| EN 61210-1995 |
连接器件铜导线用扁型速接端子安全要求 |
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements (IEC 61210:1993, modified) |
| EN 61212-1-1995 |
电工用热固性树脂工业硬质圆形层压管和棒第1部分：一般要求 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements (IEC 61212-1:1995) |
| EN 61212-2-1996 |
电工用热固性树脂工业硬质圆形层压管和棒第2部分：试验方法 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 61212-2:1995) |
| EN 61212-3-1-1995 |
电工用热固性树脂工业硬质圆形层压管和棒第3部分：单项材料规范活页1：圆形层压卷制管 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes (IEC 61212-3-1:1995) |
| EN 61212-3-2-1995 |
电工用热固性树脂工业硬质圆形层压管和棒第3部分：单项材料规范活页2：圆形层压模制管 |
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes (IEC 61212-3-2:1995) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com