标准号 |
中文名称 |
英文名称 |
EN 13395-2-2002 |
用于保护和修整混凝土结构的产品和系统 试验方法 可使用性测定 第2部分:水泥浆或灰泥的流动性试验 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 2: Test for flow of grout or mortar |
EN 13395-3-2002 |
用于保护和修整混凝土结构的产品和系统 试验方法 可使用性测定 第3部分:修补用混凝土的流动性试验 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 3: Test for flow of repair concrete |
EN 13395-4-2002 |
用于保护和修整混凝土结构的产品和系统 试验方法 可使用性测定 第4部分:在天花板上施加修补用灰泥 |
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 4: Application of repair mortar overhead |
EN 13396-2004 |
混凝土结构的防护和修理用产品和系统.试验方法.氯离子浸入测量 |
|
EN 13397-2001 |
工业阀门 金属材料制成的隔膜阀 |
Industrial valves - Diaphragm valves made of metallic materials |
EN 134-1998 |
呼吸保护装置 部件命名 |
Respiratory protective devices - Nomenclature of components |
EN 1340-2003 |
路缘用混凝土制品 要求和试验方法 |
Concrete kerb units - Requirements and test methods |
EN 13400-2001 |
鞋类 取样地点、样品和试件制备和修整持续时间 |
Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces |
EN 134000-1994 |
通用规范:可变电容器(鉴定批准和能力批准) |
Generic specification: Variable capacitors (Qualification approval and capability approval) |
EN 13401-1999 |
食品和动物饲料微生物学 梭菌水平计数法 菌落计数技术(ISO 7937:1997,修改) |
Microbiology of food and animal feeding stuffs - Horizontal method for enumeration of Clostridium perfringens - Colony-count technique (ISO 7937:1997 modified) |
EN 13402-1-2001 |
衣服尺码表示方法 第1部分:术语、定义和测体程序(ISO 3635:1981,修改) |
Size designation of clothes - Part 1: Terms, definitions and body measurement procedure (ISO 3635:1981, modified) |
EN 13402-2-2002 |
衣服尺码表示方法 第2部分:主要和次要尺寸 |
Size designation of clothes - Part 2: Primary and secondary dimensions |
EN 13402-3-2004 |
服装型号的名称与符号.第3部分:测量方法和间隔期 |
|
EN 13403-2003 |
建筑物通风 非金属管道 由绝热道管板制成的管道系统 |
Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards |
EN 13405-2002 |
表面活化剂 采用高效液相色谱(HPLC)法 测定线性烷基苯中的二烃基四氢化萘含量 |
Surface active agents - Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC) |
EN 13406-2002 |
农用机械 淤泥槽车和喷撒装置 环境保护 喷撒精度的要求和试验方法 |
Agricultural machinery - Slurry tankers and spreading devices - Environmental protection; Requirements and test methods for the spreading precision |
EN 13408-2002 |
水压调整地面平滑和/或调平用复合物的试验法 粘合强度测定 |
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength |
EN 13409-2002 |
水压调整地面平滑和/或调平用复合物的试验法 调整时间测定 |
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time |
EN 1341-2001 |
外铺路用天然石材条板 要求和试验方法 |
Slabs of natural stone for external paving - Requirements and test methods |
EN 13410-2001 |
燃气顶部辐射加热器 非家用房屋的通风要求 |
Gas-fired overhead radiant heaters - Ventilation requirements for non-domestic premises |
EN 134100-1995 |
分规范:可变电容器(鉴定批准) |
Sectional specification: Variable capacitors (Qualification approval) |
EN 134101-1995 |
空白详细规范:单匝盘形微调电容器(鉴定批准) |
Blank detail specification: Single turn disc trimmer capacitors (Qualification approval) |
EN 134102-1995 |
空白详细规范:多匝同心电容器(鉴定批准) |
Blank detail specification: Multi turn concentric capacitors (Qualification approval) |
EN 134103-1995 |
空白详细规范:叶片型空气价质电容器(鉴定批准) |
Blank detail specification: Vane type air dielectric capacitor (Qualification approval) |
EN 134104-1995 |
空白详细规范:压缩型微调电容器(鉴定批准) |
Blank detail specification: Compression type trimmer capacitors (Qualification approval) |
EN 13411-1-2002 |
钢丝绳终端设备 安全性 第1部分:钢丝绳吊索用套管 |
Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
EN 13411-2-2001 |
钢丝绳终端设备 安全性 第2部分:钢丝绳吊索用连接环 |
Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings |
EN 13411-3-2004 |
钢丝绳接线端.安全.第3部分:箍和箍卡紧 |
|
EN 13411-4-2002 |
钢丝绳终端设备 安全性 第4部分:金属和树脂套座 |
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
EN 13411-5-2003 |
钢丝绳终端设备 安全性 第5部分:U型螺栓丝夹 |
Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
EN 13411-6-2004 |
钢丝绳接线端.安全.第6部分:非对称楔形连接套筒 |
|
EN 13412-2002 |
用于保护和修整混凝土结构的产品和系统 试验方法 压缩弹性模量的测定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
EN 13413-2001 |
弹性地板覆盖物 填充纤维底板上的聚氯乙烯地面覆盖物 规范 |
Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification |
EN 13414-1-2003 |
钢丝绳吊索 安全性 第1部分:通用提升用吊索 |
Steel wire rope slings - Safety - Part 1: Slings for general lifting service |
EN 13414-2-2003 |
钢丝绳吊索 安全性 第2部分:由生产商提拱的使用和维修信息用规范 |
Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
EN 13414-3-2003 |
钢丝绳吊索 安全性 第3部分:索眼和吊装吊索 |
Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings |
EN 13415-2002 |
粘合剂 地板覆盖物粘性剂试验 粘膜电阻测定 |
Adhesives - Testing of adhesives for floor coverings - Determination of the electrical resistance of adhesive films |
EN 13416-2001 |
挠性防水板 沥青、塑料和橡胶屋面防水板 取样规则 |
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling |
EN 13417-1-2001 |
加强物 编品规范 第1部分:名称 |
Reinforcement - Specifications for woven fabrics - Part 1: Designation |
EN 13417-2-2001 |
加强物 编织品规范 第2部分:试验方法和一般要求 |
Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements |
EN 13417-3-2001 |
加强物 编织品规范 第3部分:特殊要求 |
Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements |
EN 13418-2004 |
橡胶和塑料机械.薄膜或薄板用卷切机.安全要求 |
|
EN 1342-2001 |
外铺路用天然石材小方石板 要求和试验方法 |
Setts of natural stone for external paving - Requirements and test methods |
EN 13422-2004 |
垂直道路标志.移动式道路交通标志.锥形和圆柱形交通路标 |
|
EN 13423-2000 |
压缩天然气车辆操作 |
Compresses natural gas vehicle operations |
EN 13427-2000 |
包装 包装和包装废物领域中采用欧洲标准的要求 |
Packaging - Requirements for the use of European standards in the field of packaging and packaging waste |
EN 13427-2004 |
包装.包装现场和包装废弃物欧洲标准的使用要求 |
|
EN 13428-2000 |
包装 制造和合成的特殊要求 防止资源减少 |
Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
EN 13428-2004 |
包装.制造和组成的特定要求.资源减少的防止 |
|
EN 13429-2000 |
包装 再生 |
Packaging - Reuse |
EN 13429-2004 |
包装.重新使用 |
|
EN 1343-2001 |
外铺路用天然石材路牙 要求和试验方法 |
Kerbs of natural stone for external paving - Requirements and test methods |
EN 13430-2000 |
包装 以材料重复利用的方式回收的包装的要求 |
Packaging - Requirements for packaging recoverable by material recycling |
EN 13430-2004 |
包装.通过材料再循环评定包装可回收性的要求 |
|
EN 13431-2000 |
包装 以能量再生的方式回收的包装的要求,包括最小热值规范 |
Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
EN 13431-2004 |
包装.以能量恢复的形式评定包装可回收性的要求(包括最小次热值规范) |
|
EN 13432-2000 |
包装 通过复合和降解而回收的包装的要求 包装终验试验大纲和评估标准 |
Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging |
EN 13435-2001 |
表面活性剂 烃基二甲基三甲铵乙内酯中自由胺含量的测定 |
Surface active agents - Determination of free amine content of alkyl dimethyl betaines |
EN 13437-2003 |
包装和材料再生 再生方法准则 再生过程描述和流程图 |
Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart |
EN 13439-2003 |
包装 能量回收率 定义和计算方法 |
Packaging - Rate of energy recovery - Definition and method of calculation |
EN 1344-2002 |
粘土铺路机 要求和试验方法 |
Clay pavers - Requirements and test methods |
EN 13440-2003 |
包装 再生率 定义和计算方法 |
Packaging - Rate of recycling - Definition and method of calculation |
EN 13441-2001 |
生物技术 研究、发展和分析实验室 遗传改性植物容器指南 |
Biotechnology - Laboratories for research, development and analysis - Guidance on containment of genetically modified plants |
EN 13442-2002 |
木地板和木镶板及覆盖层 抗化学试剂腐蚀性的测定 |
Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents |
EN 13443-1-2002 |
建筑物内水调节设备 机械过滤器 第1部分:颗粒级80μm-150μm 性能和安全要求 |
Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80μm to 150μm; Requirements for performances, safety and testing |
EN 13444-1-2001 |
电动汽车 混合车排放物测定 第1部分:热电混合车 |
Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Part 1: Thermal electric hybrid vehicles |
EN 13445-1-2002 |
不用火的压力容器 第1部分:总则 |
Unfired pressure vessels - Part 1: General |
EN 13445-2-2002 |
不用火的压力容器 第2部分:材料 |
Unfired pressure vessels - Part 2: Materials |
EN 13445-3-2002 |
不用火的压力容器 第3部分:设计 |
Unfired pressure vessels - Part 3: Design |
EN 13445-4-2002 |
不用火的压力容器 第4部分:制造 |
Unfired pressure vessels - Part 4: Fabrication |
EN 13445-5-2002 |
不用火的压力容器 第5部分:检查和测试 |
Unfired pressure vessels - Part 5: Inspection and testing |
EN 13445-6-2002 |
不用火的压力容器 第6部分:由球墨铸铁制成的压力容器及压力零件的的设计和制造要求 |
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron / Note: To be amended by EN 13445-6/prA1 (2003-10) (in preparation). |
EN 13445-6/A1-2004 |
不用火加热的压力容器.第6部分:球状石墨铸铁制压力容器和压力部件的设计和制造要求 |
|
EN 13445-6/prA1-2002 |
不可燃压力容器 第6部分:由球墨铸铁制成的压力容器及压力零件的的设计和制造要求 修改A1 |
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; Amendment A1 |
EN 13446-2002 |
木基板 测定接合件的退缩量 |
Wood-based panels - Determination of withdrawal capacity of fasteners |
EN 13447-2001 |
电动汽车 术语 |
Electrically propelled road vehicles - Terminology |
EN 13448-2001 |
农业和林业机械 行间割草机 安全性 |
Agricultural and forestry machinery - Inter-row mowing units - Safety |
EN 13450-2002 |
铁路路基集料 |
Aggregates for railway ballast |
EN 13451-1-2001 |
泳池设备 第1部分:一般安全要求和试验方法 |
Swimming pool equipment - Part 1: General safety requirements and test methods |
EN 13451-10-2004 |
游泳池设备.第10部分:跳台、跳板和相关设备的附加特殊安全要求和试验方法 |
|
EN 13451-11-2004 |
游泳池设备.第11部分:可移动游泳池地板和护岸的附加专用安全要求和试验方法 |
|
EN 13451-3-2001 |
泳池设备 第3部分:水处理用泳池配件的附加特殊安全要求和试验方法 |
Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for pool fittings for water treatment purposes |
EN 13451-4-2001 |
泳池设备 第4部分:起跳台的附加特殊安全要求和试验方法 |
Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms |
EN 13451-5-2001 |
泳池设备 第5部分:泳道的附加特殊安全要求和试验方法 |
Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines |
EN 13451-6-2001 |
泳池设备 第6部分:转板的附加特殊安全要求和试验方法 |
Swimming pool equipment - Part 6: Additional specific safety requirements and test methods for turning boards |
EN 13451-7-2001 |
泳池设备 第7部分:水球球门的附加特殊安全要求和试验方法 |
Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals |
EN 13451-8-2001 |
泳池设备 第8部分:备用水部件的附加特殊安全要求和试验方法 |
Swimming pool equipment - Part 8: Additional specific safety requirements and test methods for leisure water features |
EN 13452-1-2003 |
铁路设备 制动器 质量转移制动系统 第1部分:性能要求 |
Railway applications - Braking; Mass transit brake system - Part 1: Performance requirements |
EN 13452-2-2003 |
铁路设备 制动器 质量转移制动系统 第2部分:试验方法 |
Railway applications - Braking; Mass transit brake systems - Part 2: Methods of test |
EN 13453-1-2004 |
家具.非家用双层床和高床.第1部分:安全、强度和耐久性要求 |
|
EN 13453-2-2004 |
家具.非家用双层床和高床.第2部分:试验方法 |
|
EN 13454-1-2004 |
地板层找平用基于硫酸钙的粘合剂、复合粘合剂和工厂制混合物.第1部分:定义和要求 |
|
EN 13458-1-2002 |
低温容器 静态真空绝热容器 第1部分:基本要求 |
Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements |
EN 13458-2-2002 |
低温容器 静态真空绝热容器 第2部分:设计、制造、检查和试验 |
Cryogenic vessels - Static vacuum-insulated vessels - Part 2: Design, fabrication, inspection and testing |
EN 13458-3-2003 |
低温容器 静态真空绝热容器 第3部分:操作要求 |
Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements |
EN 13460-2002 |
维修 维修文件 |
Maintenance - Documents for maintenance |
EN 13461-2001 |
包装 圆柱挠性层压管 尺寸和公差 |
Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances |
EN 13463-1-2001 |
潜在爆炸性空气中使用的非电气设备 第1部分:基本方法和要求 |
Non-electrical equipment for potentially explosive atmospheres - Part 1: Basic method and requirements |
EN 13463-2-2004 |
潜在爆炸性环境中使用的非电气设备.第2部分:流量限制封装型fr保护设备 |
|
EN 13463-8-2003 |
潜在爆炸性空气中使用的非电气设备 第8部分:通过液体沉浸实现的保护措施“K” |
Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion k |
EN 13465-2004 |
建筑物通风.住房中空气流动率测定的计算方法 |
|
EN 13466-1-2001 |
肥料 含水量的测定(卡氏法) 第1部分:以甲醇为萃取介质 |
Fertilizers - Determination of water content (Karl Fischer methods) Part 1: Methanol as extracting medium |
EN 13466-2-2001 |
肥料 含水量的测定(卡氏法) 第1部分:以2-丙醇为萃取介质 |
Fertilizers - Determination of water content (Karl Fischer methods) - Part 2: 2-propanol as extracting medium |
EN 13467-2001 |
建筑设备和工业装置用保温制品 预成型管道保温层的尺寸、垂直度和直线度的测定 |
Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation |
EN 13468-2001 |
建筑设备和工业装置用保温制品 痕量水溶性氯化物、氟化物、硅酸盐,钠离子数和pH值的测定 |
Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH |
EN 13469-2001 |
建筑设备和工业装置用保温制品 预成型管道保温层水蒸气传导性的测定 |
Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation |
EN 13470-2001 |
建筑设备和工业装置用保温制品 预成型管道保温层表观密度的测定 |
Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation |
EN 13471-2001 |
建筑设备和工业装置用保温制品 热膨胀系数的测定 |
Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion |
EN 13472-2001 |
建筑设备和工业装置用保温制品 通过部分沉浸法测定预成型管道保温层的短期吸水性 |
Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation |
EN 13473-1-2001 |
加强物 多轴多层织物规范 第1部分:名称 |
Reinforcements - Specification for multi-axial multi-ply fabrics - Part 1: Designation |
EN 13473-2-2001 |
加强物 多轴多层织物规范 第2部分:试验方法和一般要求 |
Reinforcements - Specification for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements |
EN 13473-3-2001 |
加强物 多轴多层织物规范 第3部分:特殊要求 |
Reinforcements - Specification for multi-axial multi-ply fabrics - Part 3: Specific requirements |
EN 13475-2001 |
石灰材料 含钙量的测定 草酸盐法 |
Liming materials - Determination of calcium content - Oxalate method |
EN 13477-1-2001 |
无损检测 声波发射 装置特性 第1部分:设备描述 |
Non-destructive testing - Acoustic emission - Equipment characterisation - Part 1: Equipment description |
EN 13477-2-2001 |
无损检测 声波发射 装置特性 第2部分:工作特性确认 |
Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic |
EN 13478-2001 |
机械安全性 防火和保护 |
Safety of machinery - Fire prevention and protection |
EN 13480-1-2002 |
工业用金属管道 第1部分:总则 |
Metallic industrial piping - Part 1: General |
EN 13480-2-2002 |
工业用金属管道 第2部分:材料 |
Metallic industrial piping - Part 2: Materials |
EN 13480-3-2002 |
工业用金属管道 第3部分:设计和计算 |
Metallic industrial piping - Part 3: Design and calculation |
EN 13480-4-2002 |
工业用金属管道 第4部分:制造和安装 |
Metallic industrial piping - Part 4: Fabrication and installation |