标准号 |
中文名称 |
英文名称 |
| DIN EN 60264-2-3-2004 |
绕组线的封装.第2-3部分:圆柱形筒装交货线盘.热塑性材料制不可回收线盘的规范 |
|
| DIN EN 60264-3-1-2000 |
绕组线的封装.第3-1部分:带圆锥芯的供线盘.基本尺寸 |
(Packaging of winding wires - Part 3-1: Taper barrelled delivery spools; Basic dimensions (IEC 60264-3-1:1999); German version EN 60264-3-1:2000) |
| DIN EN 60264-3-1-2004 |
绕组线的包装.第3-1部分:圆锥形筒装交货线盘.基本尺寸 |
|
| DIN EN 60264-3-2-2000 |
绕组线的包装.第3-2部分:锥形筒式供线片盘.用热塑材料制成的可回转片盘规范 |
(Packaging of windings wires - Part 3-2: Taper barrelled delivery spools; specification for returnable spools made from thermoplastic materials (IEC 60264-3-2:1999); German version EN 60264-3-2:1999) |
| DIN EN 60264-3-3-1995 |
绕组线的封装.第3部分:带圆锥芯的供线盘.第3部分:由热塑性材料制成的单次使用的供线盘的规范 |
(Packaging of winding wires - Part 3: Taper barrelled delivery spools; section 3: Specification for non-returnable spools made from thermoplastic material (IEC 60264-3-3:1990); German version EN 60264-3-3:1994) |
| DIN EN 60264-3-3-2004 |
绕组线的封装.第3-3部分:锥形筒装交货线盘.热塑性材料制不可回收线盘的规范 |
|
| DIN EN 60264-3-4-2000 |
绕组线的包装.第3-4部分:锥形筒式供线片盘.锥形供线盘容器的基本尺寸 |
(Packaging of winding wires - Part 3-4: Taper barrelled delivery spools; basic dimensions of containers for taper barrelled delivery spools (IEC 60264-3-4:1999); German version EN 60264-3-4:1999) |
| DIN EN 60264-3-5-2000 |
绕组线的封装.第3-5部分:锥形滚筒提交线轴.由热塑材料制成的线轴容器规范 |
(Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material (IEC 60264-3-5:1999); German version EN 60264-3-5-1999) |
| DIN EN 60264-4-1-1995 |
绕组线的封装.第4部分:试验方法.第1节:热塑性塑料制成的供线盘 |
Packaging of winding wires - Part 4: Methods of test; section 1: Delivery spools made from thermoplastic material (IEC 60264-4-1:1989); German version EN 60264-4-1:1994 |
| DIN EN 60264-4-2-1995 |
绕组线的封装.第4部分:试验方法.第2节:热固性塑料制成的锥形筒式供线盘容器 |
Packaging of winding wires - Part 4: Methods of test; section 2: Containers made from thermoplastic material for taper barrelled delivery spools (IEC 60264-4-2:1992); German version EN 60264-4-2:1994 |
| DIN EN 60264-4-2-2004 |
绕组线的封装.第4-2部分:试验方法.热塑材料制锥形筒装交货线盘容器 |
|
| DIN EN 60264-5-1-1998 |
绕组线的包装.第5-1部分:带圆柱芯和圆锥法兰的线圈.尺寸 |
Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges; basic dimensions (IEC 60264-5-1:1997); German version EN 60264-5-1:1997 |
| DIN EN 60264-5-1-2004 |
绕组线的包装.第5-1部分:带圆锥形侧板的圆柱形筒装交货线盘.基本尺寸 |
|
| DIN EN 60264-5-2-2002 |
绕组线的包装.第5-2部分:圆锥形筒装交货线盘.热塑材料可回收线盘规范 |
Packaging of winding wires - Part 5-2: Cylindrical barelled delivery spools with conical flanges; Specification for returnable spools made from thermoplastic material (IEC 60264-5-2:2001); German version EN 60264-5-2:2001 |
| DIN EN 60265-1-1999 |
高压开关.第1部分:1kV以上至52kV以下测量电压用高压开关 |
High-voltage switches - Part 1: Switches for rated voltages above 1 kV and less than 52 kV (IEC 60265-1:1998); German version EN 60265-1:1998 |
| DIN EN 60265-2-1998 |
高压开关.第2部分:52kV及其以上测量电压用高压开关 |
(High-voltage switches - Part 2: High-voltage switches for rated voltages of 52 kV and above (IEC 60265-2:1988 + Corrigendum 1990 + A1:1994); German version EN 60265-2:1993 + A1:1995) |
| DIN EN 60265-2/A2-1999 |
高压开关.第2部分:52kV及其以上测量电压用高压开关 |
(High-voltage switches - Part 2: High-voltage switches for rated voltages of 52 kV and above (IEC 60265-2:1988/A2:1998); German version EN 60265-2:1993/A2:1998) |
| DIN EN 60268-12-1995 |
音响系统设备.第12部分:广播和类似用途连接器的应用 |
(Sound system equipment - Part 12: Application of connectors for broadcast and similar use (IEC 60268-12:1987 + A1:1991 + A2:1994); German version EN 60268-12:1995 + A2:1995) |
| DIN EN 60268-16-2004 |
声系统设备.第16部分:用语音传输系数测定语音清晰度的目标额定功率 |
(Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index (IEC 60268-16:2003); German version EN 60268-16:2003) |
| DIN EN 60268-16-2004 |
声系统设备.第16部分:用语音传输系数测定语音清晰度的目标额定功率 |
|
| DIN EN 60268-3 Berichtigung 1-2002 |
对DINEN60268-3:2001-10的勘误 |
(Corrigenda to DIN EN 60268-3:2001-10) |
| DIN EN 60268-3-2001 |
音响系统设备.第3部分:放大器 |
(Sound system equipment - Part 3: Amplifiers (IEC 60268-3:2000); German version EN 60268-3:2000) |
| DIN EN 60268-4-2000 |
音响系统设备.第4部分:传声器 |
(Sound system equipment - Part 4: Microphones (IEC 60284-4:1997); German version EN 60268-4:1999) |
| DIN EN 60268-4-2004 |
声系统设备.第4部分:传声器 |
|
| DIN EN 60268-5-1997 |
音响系统设备.第5部分:扬声器 |
(Sound system equipment - Part 5: Loudspeakers (IEC 60268-5:1989 + A1:1993 + A2:1996); German version EN 60268-5:1996 + A2:1996) |
| DIN EN 60268-7-1996 |
音响系统设备.第7部分:头戴听筒和耳塞耳机 |
(Sound system equipment - Part 7: Headphones and earphones (IEC 60268-7:1996); German version EN 60268-7:1996) |
| DIN EN 60269-1-1999 |
低压熔断器.第1部分:一般要求 |
(Low-voltage fuses - Part 1: General requirements (IEC 60269-1:1998); German version EN 60269-1:1998) |
| DIN EN 60269-1-2005 |
低压熔断器.第1部分:一般要求 |
|
| DIN EN 60269-2-2002 |
低压熔断器.第2部分:专职人员使用的熔断器(主要是工业用熔断器)的补充要求 |
(Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) (IEC 60269-2:1986 + A1:1995 + A2:2001); German version EN 60269-2:1995 + A1:1998 + A2:2002) |
| DIN EN 60269-3-1995 |
低压熔断器.第3部分:对不熟练人员使用的熔断器(主要是家用和类似用途的熔断器)的补充要求 |
(Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (Fuses mainly for household and similar applications) (IEC 60269-3:1987); German version EN 60269-3:1995) |
| DIN EN 60269-3-2004 |
低压熔断器.第3部分:非熟练人员用熔断器(主要是家用和类似用途的熔断器)的补充要求 |
|
| DIN EN 60269-4-1-2003 |
低压熔断器.第4-1部分:半导体器件保护用熔断体的补充要求.第1-3节:标准熔断体的类型实例(IEC60269-4-1:2002 |
(Low-voltage fuses - Part 4-1: Supplementary requirements for fuse-links for the protection of semiconductor devices; Sections I to III: Exampes of types of standardized fuse-links (IEC 60269-4-1:2002); German version EN 60269-4-1:2002) |
| DIN EN 60269-4-1997 |
低压熔断器.第4部分:半导体器件保护用熔断体的附加要求 |
(Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices (IEC 60269-4:1986); German version EN 60269-4:1996) |
| DIN EN 60269-4/A1-1997 |
低压熔断器.第4部分:半导体器件保护用熔断体的附加要求 |
(Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices (IEC 60269-4:1986/A1:1995); German version EN 60269-4:1996/A1:1997) |
| DIN EN 60270 Berichtigung 1-2002 |
DINEN60270(VDE0434):2001-08勘误 |
(Corrigenda to DIN EN 60270 (VDE 0434):2001-08) |
| DIN EN 60270-2001 |
高电压试验技术.部分放电测量 |
(High-voltage test techniques - Partial discharge measurement (IEC 60270:2000); German version EN 60270:2001) |
| DIN EN 60276-1997 |
碳刷、刷握、换向器和滑环的定义和名称 |
(Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings (IEC 60276:1968 + A1:1987); German version EN 60276:1996) |
| DIN EN 60282-1-1998 |
高压熔断器.第1部分:电流限定熔断器 |
(High-voltage fuses - Part 1: Current-limiting fuses (IEC 60282-1:1994 + A1:1996); German version EN 60282-1:1996 + A1:1996) |
| DIN EN 60282-1-2004 |
高压熔断器.第1部分:限流熔断器 |
|
| DIN EN 60282-1/A2-1998 |
高压熔断器.第1部分:电流限定熔断器.修改A2 |
(High-voltage fuses - Part 1: Current-limiting fuses; Amendment A2 (IEC 60282-1:1994/A2:1997); German version EN 60282-1:1996/A2:1997) |
| DIN EN 60285-2000 |
碱性二次电池和电池组.气密圆柱形再充电镍镉单节电池 |
(Alkaline secondary cells and batteries - Sealed nickel-cadmium cylindrical rechargeable single cells (IEC 60285:1993 + Corrigendum 1993 + A1:1995 + A2:1998); German version EN 60285:1994 + A1:1995 + A2:1999) |
| DIN EN 60286-1-1998 |
自动处理用件的封装.第1部分:带有轴向接线的件的带封装 |
(Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes (IEC 60286-1:1997); German version EN 60286-1:1998) |
| DIN EN 60286-2-2003 |
自动装配用件的包装.第2部分:具有单向引线的件在连续编带上的带式包装 |
(Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes (IEC 60286-2:1997 + A1:2002); German version EN 60286-2:1998 + A1:2003) |
| DIN EN 60286-3-1998 |
自动处理用件的封装.第3部分:可表面安装的件的带封装 |
(Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (IEC 60286-3:1997); German version EN 60286-3:1998) |
| DIN EN 60286-4-1998 |
自动处理用件的封装.第4部分:带有E型和G型外壳的电子件用棒料箱 |
(Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of form E and G (IEC 60286-4:1997); German version EN 60286-4:1998) |
| DIN EN 60286-5-1997 |
自动操作的件包装.第5部分:托盘 |
(Packaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-5:1995, modified); German version EN 60286-5:1997) |
| DIN EN 60286-5-2004 |
自动装配用件的包装.第5部分:矩阵式料盘 |
|
| DIN EN 60286-6-1999 |
自动处理用件的封装.第6部分:表面安装组件包装用的散件罐 |
(Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components (IEC 60286-6:1998); German version EN 60286-6:1998) |
| DIN EN 60286-6-2004 |
自动装配用件的包装.第6部分:表面安装组件的散装盒包装 |
|
| DIN EN 60289-2003 |
电抗器 |
(Reactors (IEC 60289:1988, modified); German version EN 60289:1994 + A11:2002) |
| DIN EN 60296-2005 |
电工用液体.变压器和开关设备用未使用过的矿物绝缘油 |
|
| DIN EN 60297-3-101-2005 |
电子设备用机械结构件.482.6mm(19 in)系列机械结构件的尺寸.第3-101部分:插箱及其插件 |
|
| DIN EN 60297-3-102-2005 |
电子设备用机械结构件.482.6mm(19 in)系列机械结构件的尺寸.第3-102部分:注入器/抽出器手柄 |
|
| DIN EN 60297-3-103-2005 |
电子设备用机械结构件.482.6mm(19 in)系列机械结构件的尺寸.第3-103部分:键控和定位销 |
|
| DIN EN 60297-4-1995 |
电气设备的结构.482.6mm(19.in)系列机械结构件的尺寸.第4部分:部件和部件支架.附加尺寸 |
(Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 4: Subracks and associated plug-in units - Additional dimensions (IEC 60297-4:1995); German version EN 60297-4:1995) |
| DIN EN 60297-4/A1-1999 |
电气设备的机械结构.482.6mm(19.in)系列机械结构件的尺寸.第4部分:插入部件和部件支架.附加尺寸 |
(Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 4: Subracks and associated plug-in units; additional dimensions (IEC 60297-4:1995/A1:1999); German version EN 60297-4:1995/A1:1999) |
| DIN EN 60297-5-100-2001 |
电子设备的机械结构.482,6mm(19in)系列的机械结构的尺寸.第5-100部分:与插入件有关的部件的设计总览 |
(Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-100: Subracks and associated plug-in-units; Design overview (IEC 60297-5-100:2001); German version EN 60297-5-100:2001) |
| DIN EN 60297-5-101-2001 |
电子设备的机械结构.482,6mm(19in)系列的机械结构的尺寸.第5-101部分:与插入件有关的喷射器/抽出器把手 |
(Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-101: Subracks and associated plug-in-units; Injector/extractor handle (IEC 60297-5-101:2001); German version EN 60297-5-101:2001) |
| DIN EN 60297-5-102-2001 |
电子设备的机械结构.482,6mm(19in)系列的机械结构的尺寸.第5-101部分:与插入件有关的电磁屏蔽条款 |
(Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-102: Subracks and associated plug-in-units; Electromagnetic shielding provision (IEC 60297-5-102:2001); German version EN 60297-5 |
| DIN EN 60297-5-103-2001 |
电子设备的机械结构.482.6mm(19in)系列的机械结构的尺寸.第5-103部分:辅助框架和相关插件.静电放电保护 |
(Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-103: Subracks and associated plug-in-units; Electrostatic discharge protection (IEC 60297-5-103:2001); German version EN 60297-5- |
| DIN EN 60297-5-104-2001 |
电子设备的机械结构.482,6mm(19in)系列的机械结构的尺寸.第5-104部分:有关的插入件.电键 |
(Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-104: Subracks and associated plug-in-units; Keying (IEC 60297-5-104:2001); German version EN 60297-5-104:2001) |
| DIN EN 60297-5-105-2001 |
电子设备的机械结构.482.6mm(19in)系列的机械结构的尺寸.第5-105部分:辅助框架和相关插件.定位销和/或接地 |
(Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-105: Subracks and associated plug-in-units; Alignment and/or earth pin (IEC 60297-5-105:2001); German version EN 60297-5-105:2001 |
| DIN EN 60297-5-107-2001 |
电子设备的机械结构.482,6mm(19in)系列的机械结构的尺寸.第5-107部分:有关的插入件.后背固定的插入件 |
(Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in-units; Rear-mounted plug-in units (IEC 60297-5-107:2001); German version EN 60297-5-107:2001 |
| DIN EN 60298 Berichtigung 1-1999 |
对DINEN60298(VDE0670第6部分):1998-05的校正 |
(Corrigenda to DIN EN 60298 (VDE 0670 Teil 6):1998-05) |
| DIN EN 60298 Berichtigung 2-2001 |
DINEN60298(VDE0670Teil6):1998-05的勘误 |
(Corrigenda to DIN EN 60298 (VDE 0670 Teil 6):1998-05; German version EN 60298:1996/A11:1999) |
| DIN EN 60298-1998 |
测量电压1kV以上至52kV包括52kV用金属封闭式交流电开关设备 |
(A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (IEC 60298:1990 + Corrigendum 1995 + A1:1994); German version EN 60298:1996) |
| DIN EN 60299-1994 |
家用电热毯.特性的测量方法 |
(Household electric blankets - Methods for measuring performance (IEC 60299:1994); German version EN 62099:1994) |
| DIN EN 603-1-1996 |
铝和铝合金.挤压或轧制的锻造预加工材料.第1部分:交货技术条件 |
(Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery; German version EN 603-1:1996) |
| DIN EN 603-2-1996 |
铝和铝合金.挤压或轧制的锻造预加工材料.第2部分:机械性能 |
(Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties; German version EN 603-2:1996) |
| DIN EN 603-3-2000 |
铝和铝合金.锻造坯料.第3部分:尺寸和形状公差 |
(Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form; German version EN 603-3:2000) |
| DIN EN 60300-1-2004 |
可靠性管理.第1部分:可靠性管理系统 |
(Dependability management - Part 1: Dependability management systems (IEC 60300-1:2003); German version EN 60300-1:2003) |
| DIN EN 60300-1-2004 |
可靠性管理.第1部分:可靠性管理系统 |
|
| DIN EN 60300-2-1996 |
可靠性管理.第2部分:可靠性程序素和任务 |
(Dependability management - Part 2: Dependability programme elements and tasks (IEC 60300-2:1995); German version EN 60300-2:1996) |
| DIN EN 60300-2-2004 |
可靠性管理.第2部分:可靠性管理指南 |
|
| DIN EN 60300-3-1-2005 |
可靠性管理.第3-1部分:应用指南.可靠性分析技术.方法指南(IEC 60300-3-1-2003) |
|
| DIN EN 60300-3-12-2004 |
可信性管理.第3-12部分:应用指南.综合逻辑支持 |
|
| DIN EN 60300-3-14-2004 |
可信性管理.第3-14部分:应用指南.维修和维修支持 |
|
| DIN EN 60305-1996 |
额定电压1kV以上架空线用绝缘子.交流设备用陶瓷或玻璃绝缘子.盘形悬式绝缘子的特性值 |
(Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type (IEC 60305:1995); German version EN 60305:1996) |
| DIN EN 60309-1-2000 |
工业用插头、插座和连接器.第1部分:一般要求 |
(Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements (IEC 60309-1:1999); German version EN 60309-1:1999) |
| DIN EN 60309-1/A11-2004 |
工业用插头、插座和耦合器.第1部分:一般要求 |
|
| DIN EN 60309-2-2000 |
工业用插头、插座和连接器.第2部分:销接和接触管附件的尺寸可转换性要求 |
(Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories (IEC 60309-2:1999); German version EN 60309-2:1999) |
| DIN EN 60309-2/A11-2004 |
工业用插头、插座和耦合器.第2部分:插销和插套附件的尺寸互换性要求 |
|
| DIN EN 60310-1996 |
铁路应用.铁路车辆上的牵引变压器和电抗器 |
(Railway applications - Traction transformers and inductors on rolling stock (IEC 60310:1991, modified); German version EN 60310:1996) |
| DIN EN 60310-2005 |
铁路设施.铁路车辆用牵引变压器和电感器 |
|
| DIN EN 60311-2000 |
家用和类似用途的电熨斗.性能测量方法 |
(Electric irons for household or similar use - Methods for measuring performance (IEC 60311:1995 + A1:1997 + A2:1999); German version EN 60311:1997 + A1:1997 + A2:2000) |
| DIN EN 60311-2004 |
家用或类似用途的电熨斗.性能测量方法 |
|
| DIN EN 60312-2001 |
家用真空清洁器.性能测量的方法 |
(Vacuum cleaners for household use - Methods of measuring the performance (IEC 60312:1998 + A1:2000); German version EN 60312:1998 + A1:2000) |
| DIN EN 60312-2005 |
家用真空吸尘器.性能测量方法 |
|
| DIN EN 60315-3-2000 |
各种发射类别的无线电接收机的测量方法.第3部分:调幅广播发射接收机 |
(Methods of measurement on radio receivers for various classes of emission - Part 3: Receivers for amplitude-modulated sound-broadcasting emissions (IEC 60315-3:1989 + Corrigendum 1994 + A1:1999); German version EN 60315-3:1999 + A1:1999) |
| DIN EN 60315-4-1998 |
各种发射类别的无线电接收机的测量方法.第4部分:调频广播声音发射用接收机 |
(Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions (IEC 60315-4:1997); German version EN 60315-4:1998) |
| DIN EN 60315-7-1995 |
各种发射类别的无线电接收机的测量方法.第7部分:数字卫星无线电广播发射接收机的测量方法(DSR) |
(Methods of measurement on radio receivers for various classes of emission - Part 7: Methods of measurement on digital satellite radio (DSR) receivers (IEC 60315-7:1995); German version EN 60315-7:1995) |
| DIN EN 60315-9-1996 |
各种发射类别的无线电接收机的测量方法.第9部分:无线电数据系统接收特性测试 |
(Methods of measurement on radio receivers for various classes of emission - Part 9: Measurement of the characteristics relevant to radio data system (RDS) reception (IEC 60315-9:1996); German version EN 60315-9:1996) |
| DIN EN 60317-0-1-2000 |
特种绕组线规范.第0部分:一般要求.第1节:漆包绝缘圆铜线 |
(Specifications for particular types of winding wires - Part 0-1: General requirements; enamelled round copper wire (IEC 60317-0-1:1997 + A1:1999); German version EN 60317-0-1:1998 + A1:2000) |
| DIN EN 60317-0-2-2000 |
特种绕组线规范.第0部分:一般要求.第2节:漆包矩形铜线 |
(Specifications for particular types of winding wires - Part 0-2: General requirements; enamelled rectangular copper wire (IEC 60317-0-2:1997 + A1:1999); German version EN 60317-0-2:1988 + A1:2000) |
| DIN EN 60317-0-2-2005 |
特种绕组线规范.第0-2部分:一般要求.漆包扁铜线 |
|
| DIN EN 60317-0-3-2000 |
特种绕组线规范.第0部分:一般要求.第3节:漆包圆铝线 |
(Specifications for particular types of winding wires - Part 0-3: General requirements; enamelled round aluminium wire (IEC 60317-0-3:1997 + A1:1999); German version EN 60317-0-3:1998 + A1:2000) |
| DIN EN 60317-0-3-2005 |
特种绕组线规范.第0-3部分:一般要求.漆包圆铝线 |
|
| DIN EN 60317-0-3-2005 |
特种绕组线规范.第0-3部分:一般要求.漆包圆铝线 |
|
| DIN EN 60317-0-4-2000 |
特种绕组线规范.第0-4部分:一般要求.玻璃纤维绕组树脂或清漆浸渍裸铜线或漆包扁铜线 |
(Specifications for particular types of winding wires - Part 0-4: General requirements; glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-4:1997 + A1:1999); German version EN 60317-0-4:1998 + A1:2000) |
| DIN EN 60317-0-5-2000 |
特种绕组线规范.第0-5部分:玻璃纤维成束树脂或涂漆浸渍的裸露或漆包的矩形铜线 |
(Specifications for particular types of winding wires - Part 0-5: General requirements; glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-5:1992 + A1:1997 + A2:1999); German version EN 60317-0-5:1994 |
| DIN EN 60317-0-6-2002 |
特种绕组线规范.第0-6部分:一般要求.玻璃丝绕包浸树脂或浸漆裸圆铜线或漆包圆铜线(IEC60317-0-6:2001) |
(Specifications for particular types of winding wires - Part 0-6: General requirements; Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-6:2001); German version EN 60317-0-6:2001) |
| DIN EN 60317-1-1995 |
特种绕组线规范.第1部分:聚乙烯醇乙醛漆包绝缘圆铜线.105级 |
(Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled round copper wire, class 105 (IEC 60317-1:1990); German version EN 60317-1:1994) |
| DIN EN 60317-1/A1-1997 |
特种绕组线规范.第1部分:聚乙烯醇乙醛漆包圆铜绕组线.105级 |
(Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled round copper wire, class 105 (IEC 60317-1:1990/A1:1997); German version EN 60317-1/A1:1997) |
| DIN EN 60317-11-2000 |
特种绕组线规范.第11部分:130级蚕丝覆盖的成捆聚氨酯漆包圆铜线 |
(Specifications for particular types of winding wires - Part 11: Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering (IEC 60317-11:1999); German version EN 60317-11:2000) |
| DIN EN 60317-12-1995 |
特种绕组线规范.第12部分:聚乙烯醇乙醛漆包圆铜线,120级 |
(Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120 (IEC 60317-12:1990); German version EN 60317-12:1994) |
| DIN EN 60317-13-1995 |
特种绕组线规范.第13部分:用聚酰胺-酰亚胺涂覆聚酯或聚酰胺酯漆包的圆铜线,200级 |
(Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 (IEC 60317-13:1990); German version EN 60317-13:1994) |
| DIN EN 60317-13/A1-1997 |
特种绕组线规范.第13部分:用聚酰胺-酰亚胺涂覆聚酯或聚酰胺酯漆包的圆铜绕组线,200级.修改件A1 |
(Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200; Amendment A1 (IEC 60317-13:1990/A1:1997); German version EN 60317-13/A1:1997) |
| DIN EN 60317-14-1995 |
绕组线特定型号的规范.第14部分:聚乙烯醇漆绝缘的圆铜线,等级105 |
(Specifications for particular types of winding wires - Part 14: Polyvinyl acetal enamelled round aluminium wire, class 105 (IEC 60317-14:1990); German version EN 60317-14:1994) |
| DIN EN 60317-15-1995 |
绕组线特定型号的规范.第15部分:聚酰脂亚胺漆绝缘圆铝线,等级180 |
(Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180 (IEC 60317-15:1990); German version EN 60317-15:1994) |
| DIN EN 60317-16-1995 |
特种绕组线规范.第16部分:聚酯漆包扁铜线,155级 |
(Specifications for particular types of winding wires - Part 16: Polyester enamelled rectangular copper wire, class 155 (IEC 60317-16:1990); German version EN 60317-16:1994) |
| DIN EN 60317-17-1995 |
特种绕组线规范.第17部分:聚乙烯醇乙醛漆包扁铜线,105级 |
(Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 (IEC 60317-17:1990); German version EN 60317-17:1994) |
| DIN EN 60317-17-2005 |
特种绕组线规范.第17部分:105级聚乙烯醇缩乙醛漆包扁铜线 |
|
| DIN EN 60317-18-1995 |
特种绕组线规范.第18部分:聚乙烯醇乙醛漆包扁铜线,120级 |
(Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 (IEC 60317-18:1990); German version EN 60317-18:1994) |
| DIN EN 60317-19-2000 |
特种绕组线规范.第19部分:130级聚酰胺包覆的可焊接聚氨酯漆包圆铜线 |
(Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130 (IEC 60317-19:1990 + A1:1997 + A2:1999); German version EN 60317-19:1995+ A1:1998 + A2:2000) |
| DIN EN 60317-2-2000 |
特种绕组线规范.第2部分:130级有粘结层的可焊接聚氨酯漆包圆铜线 |
(Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer (IEC 60317-2:1990 + A1:1997 + A2:1999); German version EN 60317-2:1994 + A1:1998 + A2:2000) |
| DIN EN 60317-20-2000 |
特种绕组线规范.第20部分:155级可焊接聚氨酯漆包圆铜线 |
(Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155 (IEC 60317-20:1990 + A1:1997 + A2:1999); German version EN 60317-20:1995 + A1:1998 + A2:2000) |
| DIN EN 60317-21-2000 |
特种绕组线规范.第21部分:155级聚酰胺包覆的可焊接聚氨酯漆包圆铜线 |
(Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 (IEC 60317-21:1990 + A1:1997 + A2:1999); German version EN 60317-21:1995+ A1:1998 + A2:2000) |
| DIN EN 60317-22-1996 |
绕组线特定型号的规范.第22部分:聚酯或聚酯亚胺漆包绝缘圆铜绕组线以及用聚酰胺涂层,180级 |
(Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180 (IEC 60317-22:1990); German version EN 60317-22:1995) |
| DIN EN 60317-23-2000 |
特种绕组线规范.第23部分:180级可焊接聚氨亚胺漆包圆铜线 |
(Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180 (IEC 60317-23:1990 + A1:1997 + A2:1999); German version EN 60317-23:1995 + A1:1998 + A2:2000) |
| DIN EN 60317-24-1996 |
绕组线特定型号的规范.第24部分:聚酯或聚酯亚胺漆包绝缘圆铜绕组线以及聚酰胺涂层,180级 |
(Specifications for particular types of winding wires - Part 24: Polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180 (IEC 60317-24:1990); German version EN 60317-24:1995) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com