标准号 |
中文名称 |
英文名称 |
DIN EN 1343-2002 |
室外铺路天然路边石.要求和试验方法 |
(Kerbs of natural stone for external paving - Requirements and test methods; German version EN 1343:2001) |
DIN EN 13430-2000 |
包装.通过材料再循环评定包装可回收性的要求 |
(Packaging - Requirements for packaging recoverable by material recycling; German version EN 13430:2000) |
DIN EN 13430-2004 |
包装.通过材料再循环评定包装可回收性的要求 |
|
DIN EN 13431-2000 |
包装.以能量恢复的形式评定包装可回收性的要求(包括最小次热值规范) |
(Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minium inferior calorific value; German version EN 13431:2000) |
DIN EN 13431-2004 |
包装.以能量恢复的形式评定包装可回收性的要求(包括最小次热值规范) |
|
DIN EN 13432 Berichtigung 1-2005 |
包装.通过合成及生物降解规定包装可回收性的要求.包装最终验收的测试计划和评定标准 |
|
DIN EN 13432-2000 |
包装.通过混合和生物降解评定包装可回收性的要求.试验计划和包装最后验收标准的评定 |
(Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; German version EN 13432:2000) |
DIN EN 13435-2002 |
表面活性剂.烷基二甲基三甲铵乙内酯中自由胺含量的测定 |
(Surface active agents - Determination of free amine content of alkyl dimethyl betaines; German version EN 13435:2001) |
DIN EN 13437-2004 |
包装和材料回收.回收方法的标准.回收过程和流程图的描述 |
|
DIN EN 13439-2004 |
包装.能量回收率.定义和计算方法 |
|
DIN EN 1344-2002 |
粘土铺设.要求和试验方法 |
(Clay pavers - Requirements and test methods; German version EN 1344:2002) |
DIN EN 13440-2004 |
包装.回收率.定义和计算方法 |
|
DIN EN 13441-2002 |
生物技术.研究、开发和分析实验室.遗传改良植物的抑制指南 |
(Biotechnology - Laboratories for research, development and analysis - Guidance on containment of genetically modifies plants; German version EN 13441:2001) |
DIN EN 13442-2003 |
木质拼花地板、木镶板和贴面.耐化学试剂的测定 |
(Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents; German version EN 13442:2002) |
DIN EN 13443-1-2003 |
建筑物内水调节设备.机械过滤器.第1部分:颗粒额定值80鎚到150鎚.性能、安全和试验要求 |
(Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 鎚 to 150 鎚 - Requirements for performances and safety, testing; German version EN 13443-1:2002) |
DIN EN 13444-1-2003 |
电动道路车辆.复合式车辆的排气测量.第1部分:热电复合式车辆 |
(Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Part 1: Thermic electrical hybrid vehicle; German version EN 13444-1:2001) |
DIN EN 13445 Bb.1-2002 |
非点火的压力容器.第7部分:合格评定程序使用指南 |
(Unfired pressure vessels - Part 7: Guidance on the use of the conformity assessment procedures; German version CEN/CR 13445-7:2002) |
DIN EN 13445-1 Berichtigung 1-2003 |
DINEN13445-1-2002的勘误 |
(Corrigenda to DIN EN 13445-1:2002-08) |
DIN EN 13445-1-2002 |
非燃气压力容器.第1部分:总则 |
(Unfired pressure vessels - Part 1: General; German version EN 13445-1:2002) |
DIN EN 13445-2 Berichtigung 1-2003 |
DINEN13445-2-2002的勘误 |
(Corrigenda to DIN EN 13445-2:2002-08) |
DIN EN 13445-2-2002 |
非燃气式压力容器.第2部分:材料 |
(Unfired pressure vessels - Part 2: Materials; German version EN 13445-2:2002) |
DIN EN 13445-3/A4-2005 |
非受火压力容器.第3部分:设计 |
|
DIN EN 13445-4-2002 |
非燃气式压力容器.第4部分:制造 |
(Unfired pressure vessels - Part 4: Fabrication; German version EN 13445-4:2002) |
DIN EN 13445-5 Berichtigung 1-2003 |
DINEN13445-5-2002的勘误 |
(Corrigenda to DIN EN 13445-5:2002-08) |
DIN EN 13445-5-2002 |
非燃气式压力容器.第5部分:监测和测试 |
(Unfired pressure vessels - Part 5: Inspection and testing; German version EN 13445-5:2002) |
DIN EN 13445-6-2002 |
非燃气式压力容器.第6部分:用球状石墨铸铁制成的压力容器和压力部件的设计和制造要求 |
(Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2002) |
DIN EN 13445-6/A1-2004 |
不用火加热的压力容器.第6部分:球状石墨铸铁制压力容器和压力部件的设计和制造要求 |
|
DIN EN 13446-2002 |
人造木板.紧固件撤回能力的测定 |
(Wood-based panels - Determination of withdrawal capacity of fasteners; German version EN 13446:2002) |
DIN EN 13447-2003 |
电动道路车辆.术语 |
(Electrically propelled road vehicles - Terminology; German version EN 13447:2001) |
DIN EN 13448-2002 |
农林机械.行间割草设备.安全 |
(Agricultural and forestry machinery - Inter-row mowing units - Safety; German version EN 13448:2001) |
DIN EN 13450 Berichtigung 1-2004 |
对DIN EN 13450-2003的勘误 |
|
DIN EN 13450-2003 |
铁道路基用集料 |
(Aggregates for railway ballast; German version EN 13450:2002) |
DIN EN 13451-1-2001 |
游泳池设备.第1部分:一般安全要求和试验方法 |
(Swimming pool equipment - Part 1: General safety requirements and test methods; German version EN 13451-1:2001) |
DIN EN 13451-10-2004 |
游泳池设备.第10部分:跳台、跳板和相关设备的附加特殊安全要求和试验方法 |
|
DIN EN 13451-11-2004 |
游泳池设备.第11部分:可移动游泳池地板和护岸的附加专用安全要求和试验方法 |
|
DIN EN 13451-2-2001 |
游泳池设备.第2部分:脚踏梯、梯子和手扶弯头的附加特殊安全要求和试验方法 |
(Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends; German version EN 13451-2:2001) |
DIN EN 13451-3-2001 |
游泳池设备.第3部分:水处理目的的游泳池配件的附加特殊安全要求和试验方法 |
(Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for pool fittings for water treatment purposes; German version EN 13451-3:2001) |
DIN EN 13451-4-2001 |
游泳池设备.第4部分:起跳平台的附加特殊安全要求和试验方法 |
(Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms; German version EN 13451-4:2001) |
DIN EN 13451-5-2001 |
游泳池设备.第5部分:泳道线的附加特殊安全要求和试验方法 |
(Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines; German version EN 13451-5:2001) |
DIN EN 13451-6-2001 |
游泳池设备.第6部分:转弯板的附加特殊安全要求和试验方法 |
(Swimming pool equipment - Part 6: Additional specific safety requirements and test methods for turning boards; German version EN 13451-6:2001) |
DIN EN 13451-7-2001 |
游泳池设备.第7部分:水球门的附加特殊安全要求和试验方法 |
(Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals; German version EN 13451-7:2001) |
DIN EN 13451-8-2001 |
游泳池设备.第8部分:休闲水上设备的附加特殊安全要求和试验方法 |
(Swimming pool equipment - Part 8: Additional specific safety requirements and test methods for leisure water features; German version EN 13451-8:2001) |
DIN EN 13452-1-2005 |
铁路设施.制动.公共运输制动系统.第1部分:性能要求 |
|
DIN EN 13452-2-2005 |
铁路设施.制动.公共运输制动系统.第2部分:试验方法 |
|
DIN EN 13453-1-2004 |
家具.非家用双层床和高床.第1部分:安全、强度和耐久性要求 |
|
DIN EN 13453-2-2004 |
家具.非家用双层床和高床.第2部分:试验方法 |
|
DIN EN 13454-1-2005 |
地板层找平用基于硫酸钙的粘合剂、复合粘合剂和工厂制混合物.第1部分:定义和要求 |
|
DIN EN 13454-2-2004 |
地板层找平用基于硫酸钙的粘合剂、复合粘合剂和工厂制混合物.第2部分:试验方法 |
|
DIN EN 13458-1-2002 |
冷凝容器.静置真空绝缘容器.第1部分:基本要求 |
(Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements; German version EN 13458-1:2002) |
DIN EN 13458-2-2003 |
低温容器.静压真空绝缘容器.第2部分:设计、制造、检验和测试 |
(Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 13458-2:2002) |
DIN EN 13458-3-2003 |
低温容器.静态真空绝缘容器.第3部分:操作要求 |
(Cryogenic vessels - Static vacuum insulated vessels - Part 3: Operational requirements; German version EN 13458-3:2003) |
DIN EN 13458-3-2005 |
低温容器.静态真空绝热容器.第3部分:操作要求 |
|
DIN EN 1346-1999 |
瓷砖和地板块用灰浆和胶粘剂.敞露时间的测定 |
(Adhesives for tiles - Determination of open time (includes Amendment A1:1998); German version EN 1346:1996 + A1:1998) |
DIN EN 13460-2002 |
维护.维护文件 |
(Maintenance - Documents for maintenance; German version EN 13460:2002) |
DIN EN 13461-2001 |
包装.圆柱形柔软叠层管.尺寸和公差 |
(Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances; German version EN 13461:2001) |
DIN EN 13463-1 Berichtigung 1-2003 |
DINEN13463-1的技术勘误 |
(Corrigenda to DIN EN 13463-1:2002-04 (EN 13463-1:2001/AC:2002)) |
DIN EN 13463-1-2002 |
潜在性爆炸环境中的非电气设备.第1部分:基本方法和要求 |
(Non-electrical equipment for potentially explosive atmospheres - Part 1: Basic method and requirements; German version EN 13463-1:2001) |
DIN EN 13463-2-2005 |
潜在爆炸性环境中使用的非电气设备.第2部分:流量限制封装型fr保护设备 |
|
DIN EN 13463-5-2004 |
潜在爆炸性环境中使用的非电气设备.第5部分:结构安全c型防护设备 |
|
DIN EN 13463-8-2004 |
潜在爆炸性环境中使用的非电气设备.第8部分:液浸“K“型防护设备 |
(Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion ’k’; German version EN 13463-8:2003) |
DIN EN 13463-8-2004 |
潜在爆炸性环境中使用的非电气设备.第8部分:液浸K型防护设备 |
|
DIN EN 13465-2004 |
建筑物通风.住房中空气流动率测定的计算方法 |
|
DIN EN 13466-1-2002 |
肥料.水含量的测定(卡尔.费歇尔法).第1部分:甲醇作为萃取介质 |
(Fertilizers - Determination of water content (Karl Fischer methods) - Part 1: Methanol as extracting medium; German version EN 13466-1:2001) |
DIN EN 13466-2-2002 |
肥料.水含量的测定(卡尔.费歇尔法).第2部分:2-丙醇作为萃取介质 |
(Fertilizers - Determination of water content (Karl Fischer methods) - Part 2: 2-propanol as extracting medium; German version EN 13466-2:2001) |
DIN EN 13467-2001 |
建筑设备和工业设施用隔热制品.预制管绝缘层的尺寸、垂直度和线性度的测定 |
(Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation; German version EN 13467:2001) |
DIN EN 13468-2001 |
建筑设备和工业设施用隔热制品.水溶性氯化物、氟化物、硅酸盐、钠离子和pH值的微量测定 |
(Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, and sodium ions and pH; German version EN 13468:2001) |
DIN EN 13469-2001 |
建筑设备和工业设施用隔热制品.预制管绝缘层水蒸气渗透率的测定 |
(Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation; German version EN 13469:2001) |
DIN EN 1347-1999 |
瓷砖和地板块用灰浆和胶粘剂.浸湿效力的测定 |
(Adhesives for tiles - Determination of wetting capability (includes Amendment A1:1998); German version EN 1347:1996 + A1:1998) |
DIN EN 13470-2001 |
建筑设备和工业设施用隔热制品.预制管绝缘层外观密度的测定 |
(Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation; German version EN 13470:2001) |
DIN EN 13471-2001 |
建筑设备和工业设施用隔热制品.热膨胀系数的测定 |
(Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion; German version EN 13471:2001) |
DIN EN 13472-2001 |
建筑设备和工业设施用隔热制品.部分浸入法测定预制管绝缘层的短期水吸收性 |
(Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation; German version EN 13472:2001) |
DIN EN 13473-1-2001 |
增强.多轴多股纤维织物规范.第一部分:名称 |
(Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation; German version EN 13473-1:2001) |
DIN EN 13473-2-2001 |
增强.多轴多股纤维织物规范.第2部分:试验方法和一般要求 |
(Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements; German version EN 13473-2:2001) |
DIN EN 13473-3-2001 |
增强.多轴多股纤维织物规范.第3部分:特殊要求 |
(Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements; German version EN 13473-3:2001) |
DIN EN 13475-2002 |
石灰处理材料.钙含量的测定.草酸酯法. |
(Liming materials - Determination of calcium content - Oxalate method; German version EN 13475:2001) |
DIN EN 13477-1-2001 |
无损检验.声音发射试验.设备特性.第1部分:设备描述 |
(Non-destructive testing - Acoustic emission testing - Equipment characterisation - Part 1: Equipment description; German version EN 13477-1:2001) |
DIN EN 13477-2-2001 |
无损检验.声音发射试验.设备特性.第2部分:操作特性检验 |
(Non-destructive testing - Acoustic emission testing; Equipment characterisation - Part 2: Verification of operating characteristics; German version EN 13477-2:2001) |
DIN EN 13478-2002 |
机械安全.防火及保护 |
(Safety of machinery - Fire prevention and protection; German version EN 13478:2001) |
DIN EN 1348-1999 |
瓷砖和板块用灰浆和胶粘剂.房屋内部和外部用水泥灰浆的粘附强度的测定 |
(Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives (includes Amendment A1:1998); German version EN 1348:1997 + A1:1998) |
DIN EN 13480 Bb.1-2002 |
金属工业管道.第7部分;合格评定程序使用指南 |
(Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures; German version CEN/TR 13480-7:2002) |
DIN EN 13480-1 Berichtigung 1-2005 |
金属工业管道.第1部分:总则.德文版本 EN 13480-1-2002,对DIN EN 13480-1-2002的勘误 |
|
DIN EN 13480-1-2002 |
金属工业管道.第1部分;通则 |
(Metallic industrial piping - Part 1: General; German version EN 13480-1:2002) |
DIN EN 13480-2-2002 |
金属工业管道.第2部分;材料 |
(Metallic industrial piping - Part 2 : Materials; German version EN 13480-2:2002) |
DIN EN 13480-3 Berichtigung 1-2005 |
金属工业用管道.第3部分:设计和计算;德文版本 EN 13480-3-2002.对DIN EN 13480-3-2002 的勘误 |
|
DIN EN 13480-3-2002 |
金属工业管道.第3部分;计算和设计 |
(Metallic industrial piping - Part 3: Design and calculation; German version EN 13480-3:2002) |
DIN EN 13480-3/A1-2005 |
金属工业用管道.第3部分:设计和计算 |
|
DIN EN 13480-4-2002 |
金属工业管道.第4部分;生产和安装 |
(Metallic industrial piping - Part 4: Fabrication and installation; German version EN 13480-4:2002) |
DIN EN 13480-5-2002 |
金属工业管道.第5部分;检验和测试 |
(Metallic industrial piping - Part 5: Inspection and testing; German version EN 13480-5:2002) |
DIN EN 13480-6-2004 |
金属工业管道.第6部分:埋管的额外要求 |
|
DIN EN 13481-1-2003 |
铁路设施.轨道.紧固系统的性能要求.第1部分:定义 |
(Railway applications - Track; Performance requirements for fastening systems - Part 1: Definitions; German version EN 13481-1:2002) |
DIN EN 13481-2-2003 |
铁路设施.轨道.紧固系统的性能要求.第2部分:混凝土轨枕的紧固系统 |
(Railway applications - Track; Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers; German version EN 13481-2:2002) |
DIN EN 13481-3-2003 |
铁路设施.轨道:紧固系统的性能要求.第3部分:木质轨枕的紧固系统 |
(Railway applications - Track; Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers; German version EN 13481-3:2002) |
DIN EN 13481-4-2003 |
铁路设施.轨道.紧固系统的性能要求.第4部分:钢轨枕的紧固系统 |
(Railway applications - Track; Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers; German version EN 13481-4:2002) |
DIN EN 13481-5-2003 |
铁路设施.轨道.紧固系统的性能要求.第5部分:厚板轨道的紧固系统 |
(Railway applications - Track; Performance requirements for fastening systems - Part 5: Fastening systems for slab track; German version EN 13481-5:2002) |
DIN EN 13481-7-2003 |
铁路设施.轨道.紧固系统的性能要求.第7部分:尖轨、岔道和护轨用特殊紧固系统 |
(Railways applications - Track; Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails; German version EN 13481-7:2003) |
DIN EN 13482-2002 |
沥青用橡胶软管及软管组件.规范 |
(Rubber hoses and hose assemblies for asphalt and bitumen - Specification; German version EN 13482:2001) |
DIN EN 13484-2002 |
雪橇使用者的头盔 |
(Helmets for users of luges; German version EN 13484:2001) |
DIN EN 13485-2002 |
冷冻、深冻/速冻食品和冰淇淋运输、储存和配送的空气和产品温度测量用温度计.试验、性能、适合性 |
(Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Test, performance, suitability; German version EN 13485:2001) |
DIN EN 13486-2002 |
冷冻、深冻/速冻食品和冰淇淋的运输、储存和配送用温度计记录仪和温度计.定期验证 |
(Thermometer recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification; German version EN 13486:2001) |
DIN EN 13487-2004 |
热交换器.强制对流空气冷却制冷剂凝结器和干式冷却机.声音测量 |
|
DIN EN 13488-2003 |
木地板.镶嵌地板构件 |
(Wood flooring - Mosaic parquet elements; German version EN 13488:2002) |
DIN EN 13489-2003 |
木地板.多层拼花地板构件 |
(Wood flooring - Multi-layer parquet elements; German version EN 13489:2002) |
DIN EN 1349 Berichtigung 1-2002 |
对DINEN1349:2000-12的勘误 |
(Corrigenda to DIN EN 1349:2000-12; German version EN 1349:2000/AC:2001) |
DIN EN 1349-2000 |
工业过程控制阀门 |
(Industrial process control valves; German version EN 1349:2000) |
DIN EN 13490-2002 |
机械振动.工业货车.驾驶员座椅振动的实验室评价和规范 |
(Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration; German version EN 13490:2001) |
DIN EN 13491-2004 |
土工合成阻挡层.隧道和地下结构建造中用作液体阻挡层所要求的特性 |
|
DIN EN 13492-2004 |
土工合成阻挡层.液体废物处理地点、转换站或二次容器建造时要求的特性 |
|
DIN EN 13494-2003 |
建筑设备用热绝缘产品.绝缘材料的基底涂层和粘合剂的张力连接强度测定 |
(Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material; German version EN 13494:2002) |
DIN EN 13495-2003 |
建筑设施用隔热产品.外部隔热复合系统(ETICS)耐拉脱的测定(泡沫块试验) |
(Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test); German version EN 13495:2002) |
DIN EN 13496-2003 |
建筑设备用热绝缘产品.测定玻璃纤维网状物的机械特性 |
(Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes; German version EN 13496:2002) |
DIN EN 13498-2003 |
建筑设施用隔热产品.外部隔热复合系统(ETICS)耐穿透度的测定 |
(Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS); German version EN 13498:2002) |
DIN EN 135-1999 |
呼吸防护器.相同定义的术语表 |
(Respiratory protective devices - list of equivalent terms - German version EN 135:1998) |
DIN EN 135000-1993 |
总规范.行波管放大器 |
(Generic specification: travelling wave amplifier tubes; German version EN 135000:1992) |
DIN EN 135001-1993 |
空白详细规范.功率小于500W的功率行波管放大器 |
(Blank detail specification: C.W. power amplifier travelling wave tubes up to 500 Watts; German version EN 135001:1992) |
DIN EN 13501-1-2002 |
结构产品和建筑部件的燃烧性能分类.第1部分:对燃烧试验燃烧反应的试验数据进行分类 |
(Fire classification of construction products and building elements - Part 1: Classification using test data from fire reaction to fire tests; German version EN 13501-1:2002) |
DIN EN 13502-2003 |
烟囱.泥土/陶瓷烟囱帽的要求和试验方法 |
(Chimneys - Requirements and test methods for clay/ceramic flue terminals; German version EN 13502:2002) |
DIN EN 13503-3-2000 |
眼科植入物.眼内透镜.第3部分:机械性能和试验方法 |
(Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:1999, modified); German version EN 13503-3:2000) |
DIN EN 13503-5-2001 |
眼科植入物.眼内透镜.第5部分:生物兼容性 |
(Ophthalmic implants - Intraocular lenses - Part 5: Biocompatibility (ISO 11979-5:1999, modified); German version EN 13503-5:2001) |
DIN EN 13503-6-2003 |
眼科植入物.眼内透镜.第5部分:储存寿命和运输稳定性 |
(Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability (ISO 11979-6:2002, modified); German version EN 13503-6:2002) |
DIN EN 13503-7-2002 |
眼科植入物.眼内透镜.第7部分:临床检查 |
(Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations (ISO 11979-7:2001, modified); German version EN 13503-7:2001) |