标准号 |
中文名称 |
英文名称 |
EN 71-1/A10-2004 |
玩具的安全性.第1部分:机械和物理特性 |
|
EN 71-1/A11-2004 |
玩具的安全性.第1部分:机械和物理性能 |
|
EN 71-1/A4-2004 |
玩具的安全性.第1部分:机械和物理性能.修改件A4 |
|
EN 71-1/A9-2004 |
玩具的安全性.第1部分:机械和物理性能.修改件A9 |
|
EN 71-1/prA4-2003 |
玩具的安全 第1部分:机械和物理性能 修改A4 |
Safety of toys - Part 1: Mechanical and physical properties; Amendment A4 / Note: Intended as an amendment to EN 71-1 (1998-07). |
EN 71-2-2003 |
玩具的安全 第2部分:可燃性 |
Safety of toys - Part 2: Flammability |
EN 71-5-1993 |
玩具的安全 第5部分:除试验装置以外的化学玩具(装置) |
Safety of toys - Part 5: Chemical toys (sets) other than experimental sets |
EN 71-6-1994 |
玩具的安全 第6部分:年龄警告标签用图形符号 |
Safety of toys - Part 6: Graphical symbol for age warning labelling |
EN 71-7-2002 |
玩具的安全 第7部分:手指颜料 要求和试验方法 |
Safety of toys - Part 7: Finger paints; Requirements and test methods |
EN 71-8-2003 |
玩具的安全 第8部分:室内和室外家用秋千、滑板和类似运动玩具 |
Safety of toys - Part 8: Swings, slides and similar activity toys for indoor and outdoor family domestic use |
EN 710-1997 |
铸模、制蕊机械、工厂及相关设备的安全要求 |
Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment |
EN 711-1995 |
内河航行船只 甲板围栏 要求、型式 |
Inland navigation vessels - Railings for decks - Requirements, types |
EN 712-1993 |
热塑管道系统 压力管和配件间承受机械接合件的端部负载 在恒定径向力下抗拔出性能的试验方法 |
Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force |
EN 713-1993 |
塑料管道系统 配件和聚烯烃压力管间的机械接合件 弯曲时组件内部压力密封性的试验方法 |
Plastic piping systems - Mechanical joints between fittings and polyolefin pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending |
EN 714-1994 |
热塑管道系统 压力管和模塑配件间的无端部负载的弹性密封环型接合件 在无轴向推力时内部流体静力学压力下 |
Thermoplastics piping systems - Non-end-load-bearing elastomeric sealing ring type joints between pressure pipes and moulded fittings - Test method for leaktightness under internal hydrostatic pressure without end thrust |
EN 715-1994 |
热塑管道系统 小直径压力管和配件间端部负荷的接合件 在包含轴向推力的内部水压下密封性的试验方法 |
Thermoplastics piping systems - End-load bearing joints between small diameter pressure pipes and fittings-Test method for leaktightness under internal water pressure, including end thrust |
EN 716-1-1995 |
家具 家用儿童帆布床和折叠床 第1部分:安全要求 |
Furniture - Childrens cots and folding cots for domestic use - Part 1: Safety requirements |
EN 716-2-1995 |
家具 家用儿童帆布床和折叠床 第2部分:试验方法 |
Furniture - Childrens cots and folding cots for domestic use - Part 2: Test methods |
EN 717-1-2004 |
木基板材.甲醛释出的测定.第1部分:用燃烧室法测定甲醛的排放量 |
|
EN 717-2-1994 |
木基板 甲醛释放量的测定 第2部分:用气体分析法测定甲醛释放量 |
Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method |
EN 717-3-1996 |
木基板 甲醛释放量的测定 第3部分:烧瓶法测定甲醛释放量 |
Wood-based panels - Determination of formaldehyde release - Part 3: Formaldehyde release by the flask method |
EN 718-1995 |
弹性地板覆盖物 聚氯乙烯地板覆盖物衬加强件单位面积质量的测定 |
Resilient floor coverings - Determination of mass per unit area of a reinforcement for a backing of polyvinyl chloride floor coverings |
EN 719-1994 |
焊接配合 任务和责任 |
Welding coordination - Tasks and responsibilities |
EN 720-1-1999 |
可运输气瓶 气体和气体混合物 第1部分:纯气体的特性 |
Transportable gas cylinders - Gases and gas mixtures - Part 1: Properties of pure gases |
EN 720-2-1996 |
可移动气瓶 气体和气体混合物 第2部分:气体和气体混合物的可燃性和氧化能力测定 |
Transportable gas cylinders - Gases and gas mixtures - Part 2: Determination of flammability and oxidizing ability of gases and gas mixtures |
EN 721-1998 |
旅居车 安全通风要求 |
Leisure accommodation vehicles - Safety ventilation requirements |
EN 721-2004 |
旅居车.安全通风要求 |
|
EN 722-1-1996 |
旅居车 液体燃料供暖系统 第1部分:旅居挂车和活动房(游动的假日房) |
Leisure accomodation vehicles - Liquid fuel heating systems - Part 1: Caravans and mobile homes (caravan holiday homes) |
EN 722-1-2004 |
旅居车.液体燃料供暖系统.第1部分:旅居挂车和渡假活动房屋 |
|
EN 723-1996 |
铜和铜合金 测定铜管或配件内表面上碳含量的燃烧法 |
Copper and copper alloys - Combustion method for determination of carbon on the inner surface of copper tubes or fittings |
EN 724-1994 |
无源医疗器械用EN29001、EN46001、EN29002、EN46002标准的应用指南 |
Guidance on the application of EN 29001 and EN 46001 and of EN 29002 and EN 46002 for non-active medical devices |
EN 725-1-1997 |
先进技术陶瓷 陶瓷粉的试验方法 第1部分:氧化铝中杂质的测定 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina |
EN 725-10-1997 |
先进技术陶瓷 陶瓷粉的试验方法 第10部分:压实特性的测定 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties |
EN 725-12-2001 |
先进技术陶瓷 陶瓷粉的试验方法 第12部分:氧化锆化学分析 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia |
EN 725-3-1994 |
先进技术陶瓷 陶瓷粉的试验方法 第3部分:带运载气体的热萃取法测定非氧化物中氧的含量 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas |
EN 725-5-1996 |
先进技术陶瓷 陶瓷粉的试验方法 第5部分:粒径分布的测定 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution |
EN 725-6-1996 |
先进技术陶瓷 陶瓷粉的试验方法 第6部分:比表面积的测定 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 6: Determination of the specific surface area |
EN 725-7-1995 |
先进技术陶瓷 陶瓷粉的试验方法 第7部分:绝对密度的测定 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 7: Determination of the absolute density |
EN 725-8-1997 |
先进技术陶瓷 陶瓷粉的试验方法 第8部分:捣装密度的测定 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density |
EN 725-9-1997 |
先进技术陶瓷 陶瓷粉的试验方法 第9部分:未夯实松装密度的测定 |
Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of untamped bulk density |
EN 726-1-1994 |
识别卡系统 无线通讯集成电路卡和终端 第1部分:系统概述 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 1: Systems overview |
EN 726-2-1995 |
识别卡系统 无线通讯集成电路卡和终端 第2部分:安全框架 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 2: Security framework |
EN 726-3-1994 |
识别卡系统 无线通讯集成电路卡和终端 第3部分:申请独立卡要求 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 3: Application independent card requirements |
EN 726-4-1994 |
识别卡系统 无线通讯集成电路卡和终端 第4部分:申请独立卡相关终端要求 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 4: Application independent card related terminal requirements |
EN 726-5-1999 |
识别卡系统 无线通讯集成电路卡和终端 第5部分:支付方法 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 5: Payment methods |
EN 726-6-1995 |
识别卡系统 无线通讯集成电路卡和终端 第6部分:无线通讯特性 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 6: Telecommunication features |
EN 726-7-1999 |
识别卡系统 无线通讯集成电路卡和终端 第7部分:安全模块 |
Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 7: Security module |
EN 727-1994 |
塑料管道和导管系统 热塑性管和配件 维卡(Vicat)软化温度(VST)的测定 |
Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
EN 728-1997 |
塑料管道和导管系统 聚烯烃管和配件 氧化感应时间的测定 |
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time |
EN 729-1-1994 |
焊接质量要求 金属材料熔焊 第1部分:选择和使用指南 |
Quality requirements for welding - Fusion welding of metallic materials - Part 1: Guidelines for selection and use |
EN 729-2-1994 |
焊接质量要求 金属材料熔焊 第2部分:综合质量要求 |
Quality requirements for welding - Fusion welding of metallic materials - Part 2: Comprehensive quality requirements |
EN 729-3-1994 |
焊接质量要求 金属材料熔焊 第3部分:标准质量要求 |
Quality requirements for welding - Fusion welding of metallic materials - Part 3: Standard quality requirements |
EN 729-4-1994 |
焊接质量要求 金属材料熔焊 第4部分:基本质量要求 |
Quality requirements for welding - Fusion welding of metallic materials - Part 4: Elementary quality requirements |
EN 73-1988 |
木材防腐剂 生物测试之前的被处理木材的加速老化 蒸发老化程序 |
Wood preservatives; accelerated ageing of treated wood prior to biological testing; evaporative ageing procedure |
EN 730-1-2002 |
气焊设备 安全装置 第1部分:组合回火熄灭器 |
Gas welding equipment - Safety devices - Part 1: Incorporating a flame (flashback) arrestor |
EN 730-2-2002 |
气焊设备 安全装置 第2部分:非组合回火熄灭器 |
Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor |
EN 731-1995 |
气焊设备 吸气手持喷焊器 规范和试验 |
Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests |
EN 732-1998 |
专用于液化石油气器具的规范 吸收式制冷器 |
Specifications for dedicated liquefied petroleum gas appliances - Absorption refrigerators |
EN 733-1995 |
带支承架的额定值为10bar的端吸式离心泵 公称负荷点、主要尺寸和命名系统 |
End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system |
EN 734-1995 |
侧槽泵PN40 公称负荷点、主要尺寸和命名系统 |
Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system |
EN 735-1995 |
旋转动态泵的总体尺寸 公差 |
Overall dimensions of rotodynamic pumps - Tolerances |
EN 736-2-1997 |
阀门 术语 第2部分:阀门组件定义 |
Valves - Terminology - Part 2: Definition of components of valves |
EN 737-1-1998 |
医疗气体管道系统 第1部分:压缩医疗气体和真空用终端设备 |
Medical gas pipeline systems - Part 1: Terminal units for compressed medical gases and vacuum |
EN 737-4-1998 |
医疗气体管道系统 第4部分:麻醉气体净化系统的终端设备 |
Medical gas pipeline systems - Part 4: Terminal units for anaesthetic gas scavenging systems |
EN 738-2-1998 |
医用气体用压力调节器 第2部分:多管和单管压力调节器 |
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators |
EN 74-1988 |
用于由钢管制造的工作脚手架和工作架的管接头、活动套管和底板 要求和试验程序 |
Couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes; Requirements and test procedures |
EN 740/A1-2004 |
麻醉工作台及其组件.特殊要求 |
|
EN 741-2000 |
连续处理设备和系统 散装材料气动处理用系统及其件的安全要求 |
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
EN 743-1994 |
塑料管道和导管系统 热塑管 纵向复原的测定 |
Plastic piping and ducting systems -Thermoplastics pipes -Determination of the longitudinal reversion |
EN 744-1995 |
塑料管道和导管系统 热塑管 连续法耐外部吹风的试验方法 |
Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method |
EN 745-1999 |
农业机械 旋转式割草机和连枷式割草机 安全 |
Agricultural machinery - Rotary mowers and flail-mowers - Safety |
EN 746-1-1997 |
工业热处理设备 第1部分:工业热处理设备通用安全要求 |
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
EN 746-2-1997 |
工业热处理设备 第2部分:燃烧和燃料处理系统的安全要求 |
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
EN 746-3-1997 |
工业热处理设备 第3部分:环境气体产生和使用的安全要求 |
Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases |
EN 746-4-2000 |
工业热处理设备 第4部分:热浸电镀热处理设备的特殊安全要求 |
Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment |
EN 746-5-2000 |
工业热处理设备 第5部分:盐浴热处理设备的特殊安全要求 |
Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment |
EN 746-8-2000 |
工业热处理设备 第8部分:淬火设备的特殊安全要求 |
Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment |
EN 747-1-1993 |
家具 家用床具 第1部分:安全要求 |
Furniture; bunk beds for domestic use; part 1: safety requirements |
EN 747-1/prA1-2000 |
家具 家用床具 第1部分:安全要求 修改A1 |
Furniture - Bunk beds for domestic use - Part 1: Safety requirements; Amendment A1 |
EN 747-2-1993 |
家具 家用床具 第2部分:试验方法 |
Furniture; bunk beds for domestic use; part 2: test methods |
EN 748-2004 |
运动场地器材.足球门.功能和安全技术要求及试验方法 |
|
EN 749-2004 |
运动场地器材.手球门.功能和安全技术要求及试验方法 |
|
EN 750-2004 |
运动场地器材.曲棍球门.功能和安全技术要求及试验方法 |
|
EN 751-1-1996 |
接触第1、2、3家庭用燃气和热水的金属螺纹接头的密封材料 第1部分:气密连接 |
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
EN 751-2-1996 |
接触第1、2、3家庭用燃气和热水的金属螺纹接头的密封材料 第2部分:非硬化连接 |
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
EN 752-1-1995 |
室外建筑物的排水系统 第1部分:概述和定义 |
Drain and sewer systems outside buildings - Part 1: Generalities and definitions |
EN 752-2-1996 |
室外建筑物的排水系统 第2部分:性能要求 |
Drain and sewer systems outside buildings - Part 2: Performance requirements |
EN 752-3-1996 |
室外建筑物的排水系统 第3部分:规划 |
Drain and sewer systems outside buildings - Part 3: Planning |
EN 752-4-1997 |
室外建筑物的排水系统 第4部分:液压设计和环境考虑 |
Drain and sewer systems outside buildings - Part 4: Hydraulic design and environmental considerations |
EN 752-5-1997 |
室外建筑物的排水系统 第5部分:修复 |
Drain and sewer systems outside buildings - Part 5: Rehabilitation |
EN 752-6-1998 |
室外建筑物的排水系统 第6部分:泵送装置 |
Drain and sewer systems outside buildings - Part 6: Pumping installations |
EN 752-7-1998 |
室外建筑物的排水系统 第7部分:维修和运行 |
Drain and sewer systems outside buildings - Part 7: Maintenance and operations |
EN 753-1-1997 |
识别卡系统 内插薄柔卡片 第1部分:一般技术规范 |
Identification card systems - Intersector thin flexible cards - Part 1: General technical specifications |
EN 753-2-1997 |
识别卡系统 内插薄柔卡片 第2部分:磁记录技术 |
Identification card systems - Intersector thin flexible cards - Part 2: Magnetic recording technique |
EN 753-3-1999 |
识别卡系统 内插薄柔卡片 第3部分:试验方法 |
Identification card systems - Intersector thin flexible cards - Part 3: Test methods |
EN 754-1-1997 |
铝和铝合金 冷拔棒材/条材和管材 第1部分:检验和交货技术条件 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
EN 754-2-1997 |
铝和铝合金 冷拔棒材/条材和管材 第2部分:机械特性 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
EN 754-3-1995 |
铝和铝合金 冷拔棒材/条材和管材 第3部分:圆形棒材的尺寸和形状公差 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
EN 754-4-1995 |
铝和铝合金 冷拔棒材/条材和管材 第4部分:方形条材的尺寸和形状公差 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
EN 754-5-1995 |
铝和铝合金 冷拔棒材/条材和管材 第5部分:矩形棒材的尺寸和形状公差 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
EN 754-6-1995 |
铝和铝合金 冷拔棒材/条材和管材 第6部分:六角形条材的尺寸和形状公差 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
EN 754-7-1998 |
铝和铝合金 冷拔棒材/条材和管材 第7部分:无缝管的尺寸和形状公差 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
EN 754-8-1998 |
铝和铝合金 冷拔棒材/条材和管材 第8部分:舷窗管的尺寸和形状公差 |
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 755-1-1997 |
铝和铝合金 挤压棒材/条材、管材和型材 第1部分:检验和交货的技术条件 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
EN 755-2-1997 |
铝和铝合金 挤压棒材/条材、管材和型材 第2部分:机械特性 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
EN 755-3-1995 |
铝和铝合金 挤压棒材/条材、管材和型材 第3部分:圆形棒材的尺寸和形状公差 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 3: Round bars, tolerances on dimensions and form |
EN 755-4-1995 |
铝和铝合金 挤压棒材/条材、管材和型材 第4部分:方形条材的尺寸和形状公差 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 4: Square bars, tolerances on dimensions and form |
EN 755-5-1995 |
铝和铝合金 挤压棒材/条材、管材和型材 第5部分:矩形棒材的尺寸和形状公差 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 5: Rectangular bars, tolerances on dimensions and form |
EN 755-6-1995 |
铝和铝合金 挤压棒材/条材、管材和型材 第6部分:六角形条材的尺寸和形状公差 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 6: Hexagonal bars, tolerances on dimensions and form |
EN 755-7-1998 |
铝和铝合金 挤压棒材/条材、管材和型材 第7部分:无缝管的尺寸和形状公差 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
EN 755-8-1998 |
铝和铝合金 挤压棒材/条材、管材和型材 第8部分:出口孔的尺寸和形状公差 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 755-9-2001 |
铝和铝合金 挤压棒材/条材、管材和型材 第9部分:型材的尺寸和形状公差 |
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
EN 756-1995 |
焊接消耗品 非合金和细精粒钢埋弧焊用电焊条和电焊剂混合物 分类 |
Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification |
EN 756-2004 |
焊接消耗品.非合金钢和细粒钢埋弧焊用实芯焊丝、实芯焊丝和药芯焊丝混合助熔剂.分类 |
|
EN 757-1997 |
焊接消耗品 高强度钢手工金属弧焊用涂层焊条 分类 |
Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification |
EN 758-1997 |
焊接消耗品 带和不带气体保护壳的非合金钢及细粒钢金属电弧焊接用管状芯焊条 分类 |
Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification |
EN 759-1997 |
焊接消耗品 焊接填充金属的交货技术条件 产品型号、尺寸、公差和标志 |
Welding consumables - Technical delivery conditions for welding filler metals - Type of product, dimensions, tolerances and marking |
EN 76-1978 |
某些预包装食品的包装 玻璃和金属容器的容量 |
Packages for certain prepacked foodstuffs; capacities of glass and metal containers |
EN 760-1996 |
焊接消耗品 埋弧焊用焊剂 分类 |
Welding consumables - Fluxes for submerged arc welding - Classification |
EN 761-1994 |
塑料管道系统 玻璃增强热固性塑料管 干燥条件蠕变系数的测定 |
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions |