标准号 |
中文名称 |
英文名称 |
DIN EN 23-1-1978 |
粉状洗涤剂和清洁剂的包装.纸板盒和圆筒的尺寸和容器 |
(Packages for washing and cleaning powders; dimensions and volumes of cartons and drums from fibre board) |
DIN EN 230-1991 |
整体油喷嘴.安全.检验.调节及安全性时间用装置 |
(Monobloc oil burners; safety, control and regulation devices and safety times; german version EN 230:1990) |
DIN EN 230-2005 |
燃油器用自动燃烧器控制系统 |
|
DIN EN 23015-1994 |
石油产品.烟点测定 |
(Petroleum products; determination of cloud point (ISO 3015:1992); German version EN 23015:1994) |
DIN EN 23035-1994 |
单面和单壁瓦楞纤维纸板.平面耐压力的测定 |
(Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance (ISO 3035:1982); German version EN 23035:1994) |
DIN EN 2310-1991 |
航空和航天.非金属材料燃烧特性分类用检验法 |
(Aerospace series; test methods for the flame resistance rating of non-metallic materials; german version EN 2310:1991) |
DIN EN 23107-1992 |
牙科用氧化锌--丁香酚--粘固剂和氧化锌--非丁香粉--粘固剂 |
(Dental zinc oxide/eugenol cements and zinc oxide non-eugenol cements (ISO 3107:1988); german version EN 23107:1991) |
DIN EN 2311-1988 |
航空和航天.有自动润滑衬层的轴瓦.交货技术条件 |
(Aerospace series; bushes with self-lubricating liner; technical specification) |
DIN EN 2318-1993 |
航空和航天.AL-P2024-T3511铝合金.1,2mm≤a或D≤150mm挤压棒材和型材 |
(Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections 1,2 mma or D150 mm; German version EN 2318:1992) |
DIN EN 232-2003 |
浴盆.连接尺寸 |
(Baths - Connecting dimensions; German version EN 232:2003) |
DIN EN 2326-1992 |
航空和航天.AL-P6082-T6铝合金.挤压棒材和型材a或D≤200mm |
(Aerospace series; aluminium alloy AL-P6082-T6; extruded bars and sections a or D200 mm; german version EN 2326:1992) |
DIN EN 2327-1988 |
航空和航天.航空和航天系列合金钢向心锯齿垫圈.尺寸 |
(Aerospace series; washers, lock with radial serrations in alloy steel; dimensions) |
DIN EN 23270-1991 |
漆.涂层材料以及涂层原材料.预处理和试验用温度和空气湿度 |
(Paints and varnishes and their raw materials; temperatures and humidity for conditioning and testing (ISO 3270:1984); german version EN 23270:1991) |
DIN EN 2328-1988 |
航空和航天.飞行操纵用垫圈.垫片.尺寸 |
(Aerospace series; washers, tab for flight control rods; dimensions) |
DIN EN 2329-1993 |
航空航天.玻璃纤维预浸带.测定单位面积质量的检验方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unit area; german version EN 2329:1993) |
DIN EN 233-1999 |
卷式壁衬.成品壁纸.聚乙烯壁纸和塑料壁纸的规范 |
(Wall coverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings; German version EN 233:1999) |
DIN EN 2330-1993 |
航空航天.玻璃纤维预浸带.测定易挥发成分比例的检验方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of the content of volatile matter; german version EN 2330:1993) |
DIN EN 2331-1993 |
航空航天.玻璃纤维预浸带.测定树脂成份、纤维成份以及单位面积纤维质量的检验方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993) |
DIN EN 2332-1993 |
航空航天.玻璃纤维预浸带.测定树脂流动的检验方法 |
(Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin flow; german version EN 2332:1993) |
DIN EN 2334-1997 |
航空和航天.铬硫酸中铝和铝合金的酸洗 |
(Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys; German version EN 2334:1997) |
DIN EN 2335-1988 |
航空和航天.耐蚀钢制不带导入槽的关节轴承.尺寸和负荷 |
(Aerospace series; bearings-spherical plain in corrosion resisting steel without assembly slot; dimensions and loads) |
DIN EN 2336-1988 |
航空和航天.耐蚀钢制带导入槽的关节轴承.尺寸和负荷 |
(Aerospace series; bearings-spherical plain in steel with assembly slots; dimensions and loads) |
DIN EN 2337-1996 |
航空和航天.关节轴承.交货技术条件 |
(Aerospace series - Spherical plain bearings - Technical specification; German version EN 2337:1996) |
DIN EN 2338-2003 |
航空航天系列.钛和钛合金热轧薄板材.厚度6mm~8mm |
(Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm a 6 mm; Dimensions; German and English version EN 2338:2001) |
DIN EN 2339-2003 |
航空航天系列.厚度0.2mma6mm的冷轧钛和钛合金薄板.尺寸 |
(Aerospace series - Sheets, cold rolled, in titanium and titanium alloys, thickness 0,2 mma6 mm - Dimensions; German and English version EN 2339:2001) |
DIN EN 234-1997 |
卷式壁衬.对后处理用壁衬的规定(包括更改A1:1996) |
(Wall coverings in roll form - Specification for wallcoverings for subsequent decoration (includes Amendment A1:1996); German version EN 234:1989 + A1:1996) |
DIN EN 2344-2003 |
航空航天系列.耐热合金机械加工圆棒材.直径10mm~180mm |
(Aerospace series - Round bars, machined, in heat resisting alloys - Diameter 10 mm D 180 mm; Dimensions; German and English version EN 2344:2001) |
DIN EN 2348-1989 |
航空和航天.飞机操纵钢索组件.交货技术条件 |
(Aerospace series; control cable assemblies; technical specification) |
DIN EN 235-2002 |
墙面饰层.词汇与符号 |
(Wall coverings - Vocabulary and symbols; German version EN 235:2001) |
DIN EN 2350-1991 |
航空和航天.保护开关.交货技术条件 |
(Aerospace series; circuit breakers; technical specification; german version EN 2350:1990) |
DIN EN 2353-1989 |
航空和航天.不锈钢制旋转套筒和操纵钢索.尺寸和负荷 |
(Aerospace series; turnbarrels, control cable in corrosion resisting steel; dimensions and loads) |
DIN EN 2354-1989 |
航空和航天.不锈钢制带螺纹眼端头的操纵钢索.尺寸和负荷 |
(Aerospace series; eye-ends, threaded, control cable in corrosion resisting steel; dimensions and loads) |
DIN EN 2355-1989 |
航空和航天.不锈钢制带螺纹叉端头的操纵钢索.尺寸和负荷 |
(Aerospace series; fork-ends, threaded, control cable in corrosion resisting steel; dimensions and loads) |
DIN EN 2356-1989 |
航空和航天.不锈钢制滚珠轴承用带螺纹叉端的操纵钢索.尺寸和负荷 |
(Aerospace series; fork-ends threaded, control cable for rolling bearing in corrosion resisting steel; dimensions and loads) |
DIN EN 2357-1989 |
航空和航天.用于张紧操纵钢索的不锈钢带螺纹的钢索端头 |
(Aerospace series; stud-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
DIN EN 2358-1989 |
航空和航天.用于操纵钢索的不锈钢带眼的钢索端头 |
(Aerospace series; eye-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
DIN EN 2359-1989 |
航空和航天.用于张紧操纵钢索的不锈钢带叉的钢索端头 |
(Aerospace series; fork-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
DIN EN 2360-1989 |
航空和航天.用于张紧操纵钢索的不锈钢滚珠轴承用带叉钢索端头 |
(Aerospace series; fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
DIN EN 2361-1989 |
航空和航天.用于张紧操纵钢索的不锈钢制双侧带球头的钢索端头 |
(Aerospace series; ball-ends, double shank in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
DIN EN 2362-1989 |
航空和航天.用于张紧操纵钢索的不锈钢制单侧带球头的钢索端头 |
(Aerospace series; ball-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads) |
DIN EN 2363-1989 |
航空和航天.操纵钢索的夹紧装置用保险弹簧.尺寸 |
(Aerospace series; locking clips for turnbuckles of control cables; dimensions) |
DIN EN 2364-1989 |
航空和航天.带帽紧配合销 |
(Aerospace; pins, shear, headed, close tolerance; german version EN 2364:1989) |
DIN EN 2365-1989 |
航空和航天.铝合金环 |
(Aerospace; collars, aluminium alloy; german version EN 2365:1989) |
DIN EN 23661-1994 |
离心式末端轴吸泵.基座和安装尺寸 |
(End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977); German version EN 23661:1993) |
DIN EN 2367-1989 |
航空和航天.EN2573钢制开口销 |
(Aerospace; split pins in steel EN 2573; german version EN 2367:1989) |
DIN EN 237-1996 |
液化矿物油制品.燃油.用原子吸收光谱法测定低铅含量 |
(Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry; German version EN 237:1996) |
DIN EN 237-2004 |
液态石油产品.汽油.用原子吸收光谱法测定低铅浓度 |
|
DIN EN 2374-1991 |
航空和航天.玻璃纤维增强成形材料和芯夹层材料.试验板的制造 |
(Aerospace series; glass fibre-reinforced mouldings and sandwich composites; production of test panels; german version EN 2374:1991) |
DIN EN 2375-1992 |
航空和航天.树脂浸渍材料.从非成品中取样的方法 |
(Aerospace series; resin preimpregnated materials; production batch sampling procedure; german version EN 2375:1992) |
DIN EN 23758-1993 |
纺织品.使用符号的保养标记代码 |
(Textiles; care labelling code using symbols (ISO 3758:1991); German version EN 23758:1993) |
DIN EN 2377-1989 |
航空和航天.玻璃纤维增强塑料.测定外表层间抗剪强度的检验方法 |
(Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989) |
DIN EN 2378-1995 |
航空和航天.纤维增强塑料.通过浸入测定吸水量 |
(Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion; German version EN 2378:1995) |
DIN EN 238-1996 |
液化矿物油制品.燃油.用红外线光谱法测定苯含量 |
(Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry; German version EN 238:1996) |
DIN EN 238-2004 |
液化石油产品.汽油.用红外线光谱测定法测定苯含量 |
|
DIN EN 2381-1993 |
航空和航天.AL-P7009-T7452铝合金.40mm≤a≤150mm自由锻件 |
(Aerospace series; aluminium alloy AL-P7009-T7452; hand forgings 40 mma150 mm; German version EN 2381:1992) |
DIN EN 23823-2-1991 |
牙科用旋转器械.第2部分:钢及硬金属制精整磨轮 |
(Dental rotary instruments; part 2: steel and carbide finishing burs (ISO 3823-2:1986); german version EN 23823-2:1991) |
DIN EN 2384-1992 |
航空和航天.AL-P2014A-T6511铝合金.挤压棒材和型材a或D≤150mm |
(Aerospace series; aluminium alloy AL-P2014A-T6511; extruded bars and sections a or D150 mm; german version EN 2384:1992) |
DIN EN 2385-1993 |
航空和航天.AL-P7009-T74511铝合金.a或D≤12.5mm挤压棒材和型材 |
(Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections a or D125 mm; German version EN 2385:1992) |
DIN EN 2395-1994 |
航空和航天.铝合金AL-P2014A-T4或T42.薄板和带材.0.4mm |
(Aerospace series; aluminium alloy AL-P2014A-T4 or T42; sheet and strip; 0,4 mma6 mm; German version EN 2395:1994) |
DIN EN 24006-1993 |
封闭管道内液体流量的测量.术语和符号 |
(Measurement of fluid flow in closed conduits; vocabulary and symbols (ISO 4006:1991); German version EN 24006:1993) |
DIN EN 24015-1991 |
六角螺钉.缩杆螺钉(杆直径≈螺纹中径)产品等级B(ISO4015-79) |
(Hexagon head bolts, reduced shank (shank diameterpitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991) |
DIN EN 241-2000 |
液体石油产品.钠含量测定.原子吸收分光光度测定法 |
(Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method; German version EN 241:2000) |
DIN EN 2413-1995 |
航空和航天.镀镉合金钢制短螺纹小头六角紧配合螺杆.等级:1100MPa(室温235℃) |
(Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 C; German version EN 2413:1995) |
DIN EN 24159-1990 |
锰铁和硅锰铁合金中锰含量的测定.电势滴定法 |
(Ferromanganese and ferrosilicomanganese; determination of manganese content; potentiometric method (ISO 4159, 1st edition: 1978.12.15); german version EN 24159:1989) |
DIN EN 24178-1993 |
满装的运输包装.抽样检验.要记录的信息 |
(Complete, filled transport packages; distribution trials; information to be recorded (ISO 4178:1980); german version EN 24178:1992) |
DIN EN 24180-1-1993 |
满装的运输包装.试验计划编制的一般规则.第1部分:一般原则 |
(Complete, filled transport packages; general rules for the compilation of performance test schedules; part 1: general principles (ISO 4180-1:1980); german version EN 24180-1:1992) |
DIN EN 24180-2-1993 |
满装的运输包装.试验计划编制的一般规则.第2部分:负荷参数 |
(Complete, filled transport packages; general rules for the compilation of performance test schedules; part 2: quantitative data (ISO 4180-2:1980); german version EN 24180-2:1992) |
DIN EN 24185-1993 |
封闭管道内液体流量测量.称量方法 |
(Measurement of liqid flow in closed conduits; weighing method (ISO 4185:1980); German version EN 24185:1993) |
DIN EN 24230-1990 |
R系列.圆锥形管螺纹用手用圆板牙和机用圆板牙(ISO4230:1987) |
(Hand- and machine-operated circular screwing dies for taper pipe threads, R series (ISO 4230:1987); german version EN 24230:1989) |
DIN EN 24231-1990 |
直管螺纹的手动和机动圆板牙.G系列 |
(Hand and machine-operated circular screwing dies for parallel pipe threads, G series (ISO 4231:1987); german version EN 24231:1989) |
DIN EN 2424-1995 |
航空和航天.航空和航天产品的标识 |
(Aerospace series - Marking of aerospace products; German version EN 2424:1995) |
DIN EN 24260-1994 |
石油产品和烃类.硫含量的测定.威克波耳德(Wickbold)燃烧法 |
(Petroleum products and hydrocarbons; determination of sulfur content; Wickbold combustion method (ISO 4260:1987); German version EN 24260:1994) |
DIN EN 2428-1995 |
航空和航天.乙丙橡胶(EPM/EPDM).硬度:50IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 50 IRHD; German version EN 2428:1995) |
DIN EN 2429-1995 |
航空和航天.乙丙橡胶(EPM/EPDM).硬度:60IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 60 IRHD; German version EN 2429:1995) |
DIN EN 2430-1995 |
航空和航天.乙丙橡胶(EPM/EPDM).硬度:70IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 70 IRHD; German version EN 2430:1995) |
DIN EN 2431-1995 |
航空和航天.乙丙橡胶(EPM/EPDM).硬度:80IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 80 IRHD; German version EN 2431:1995) |
DIN EN 2432-1995 |
航空和航天.乙丙橡胶(EPM/EPDM).硬度:90IRHD |
(Aerospace series - Ethylen-propylene rubber (EPM/EPDM) - Hardness 90 IRHD; German version EN 2432:1995) |
DIN EN 2437-2003 |
航空航天系列.铝及铝合金用铬酸盐转化涂层(黄色) |
(Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys; German and English version EN 2437:2001) |
DIN EN 246-1990 |
卫生设备配件.防溅板的一般要求 |
(Sanitary taps; general specifications for flow rate regulators; german version EN 246:1989) |
DIN EN 24624-1992 |
清漆和涂料.判断粘附性的撕裂试验 |
(Paints and varnishes; pull-off test for adhesion (ISO 4624:1978); german version EN 24624:1992) |
DIN EN 24641-1993 |
给水和排水用橡胶软管,要求 |
(Rubber hoses for water suction and discharge; specification (ISO 4641:1991); German version EN 24641:1993) |
DIN EN 247-1997 |
热交换器.专业术语 |
(Heat exchangers - Terminology; German version EN 247:1997) |
DIN EN 24766-1992 |
一字槽平端紧定螺钉 |
(Slotted set screws with flat point (ISO 4766:1983); german version EN 24766:1992) |
DIN EN 248-2003 |
卫生工程用配件.镍铬电镀层的一般要求 |
(Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr; German version EN 248:2002) |
DIN EN 24829-1-1992 |
钢和铸铁.硅总含量的测定.还原钼硅盐酸分光光度法.第1部分:硅含量在0.05%~1.0%之间 |
(Determination of total silicon content of steel and cast iron by the reduced molybdosilicate spectrophotometric method; silicon contents between 0,05 and 1,0 % (ISO 4829-1:1986); german version EN 24829-1:1990) |
DIN EN 24829-2-1992 |
钢和铸铁.硅总含量的测定.还原钼硅盐酸分光光度法.第2部分:硅含量在0.01%~0.05%之间 |
(Determination of total silicon content of steel and cast iron by the reduced molybdosilicate spectrophotometric method; silicon contents between 0,01 and 0,05 % (ISO 4829-2:1988); german version EN 24829-2:1990) |
DIN EN 2484-1989 |
航空和航天.制图胶片.35mm胶卷的缩微胶卷孔卡 |
(Aerospace series; microfilming of drawings; aperture card for 35 mm microfilm; german version EN 2484:1988) |
DIN EN 24869-3-1994 |
声学.听力保护器.质量检验用耳罩型保护器测量插入损失的简易方法 |
(Acoustics; hearing protectors; part 3: simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes (ISO/TR 4869-3:1989); German version EN 24869-3:1993) |
DIN EN 2489-1995 |
航空和航天.纤维增强塑料.试验液体影响的测定 |
(Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids; German version EN 2489:1995) |
DIN EN 2491-1997 |
航空和航天.二硫化钼基上的干膜润滑材料.涂层法 |
(Aerospace series - Molybdenum disulphide dry lubricants - Coating methods; German version EN 2491:1997) |
DIN EN 24920-1992 |
纺织品.不吸水性能的测定(喷雾试验法) |
(Textile fabrics; determination of resistance to surface wetting (spray test) (ISO 4920:1981); german version EN 24920:1992) |
DIN EN 24934-1990 |
钢和铸铁.硫含量的测定.重量分析法 |
(Steel and cast iron; determination of sulfur content; gravimetric method (ISO 4934, 1st edition, 1980.10.01); german version EN 24934:1989) |
DIN EN 24935-1992 |
钢和铁.硫含量的测定.感应炉内燃烧红外线吸收法 |
(Steel and iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace (ISO 4935:1989); german version EN 24935:1991) |
DIN EN 24937-1992 |
钢和铁.铬含量的测定.电位滴定法或目视滴定法 |
(Steel and iron; determination of chromium content; potentiometric or visual method (ISO 4937:1986); german version EN 24937:1990) |
DIN EN 24938-1992 |
钢和铁.镍含量的测量.重量法或滴定法 |
(Steel and iron; determination of nickel content; gravimetric or titrimetric method (ISO 4938:1988); german version EN 24938:1990) |
DIN EN 24943-1992 |
钢和铸铁.铜含量的测定.火焰原子吸收光谱测定法 |
(Steel and cast iron; determination of copper content; flame atomic absorption spectrometric method (ISO 4943:1985); german version EN 24943:1990) |
DIN EN 24946-1992 |
钢和铸铁.铜含量的测定.2.2’联喹啉分光光度法 |
(Steel and cast iron; determination of copper content; 2,2`-diquinolyl spectrophotometric method (ISO 4946:1984); german version EN 24946:1990) |
DIN EN 24947-1992 |
钢和铸铁.钒含量的测定.电位滴定法 |
(Steel and cast iron; determination of vanadium content; potentiometric titration method (ISO 4947:1986); german version EN 24947:1991) |
DIN EN 2495-1991 |
航空和航天.单极温度补偿保护开关.额定电流25A以下.产品标准 |
(Aerospace series; single-pole circuit breakers, temperature compensated rated currents up to 25 A; product standard; german version EN 2495:1990) |
DIN EN 2497-1989 |
航空和航天.钛和钛合金的干式辐射 |
(Aerospace series; dry abrasive blasting of titanium and titanium alloys; german version EN 2497:1989) |
DIN EN 2498-1991 |
航空和航天.带自动润滑衬套的滑动轴承和螺杆柄的可调操纵杆端头.尺寸和负载 |
(Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads) |
DIN EN 2499-1989 |
航空和航天.COM胶卷.缩微胶片A6 |
(Aerospace series; computer output microfilm (COM); A6 microfiche; german version EN 2499:1987) |
DIN EN 250-2000 |
呼吸器.开路自备压缩空气轻型潜水呼吸器.要求、检验、标识. |
(Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking; German version EN 250:2000) |
DIN EN 2501-1989 |
航空和航天.本身带润滑层和宽内环的不锈钢滑动轴承.尺寸和负载 |
(Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liners and wide inner ring; dimensions and loads) |
DIN EN 25077-1994 |
纺织品.洗涤干燥后尺寸变化的测定 |
(Textiles; determination of dimensional change in washing and drying (ISO 5077:1984); German version EN 25077:1993) |
DIN EN 251-1991 |
淋浴缸.连接尺寸 |
(Shower trays; connecting dimensions; german version EN 251:1990) |
DIN EN 251-2003 |
淋浴缸.连接尺寸 |
(Shower trays - Connecting dimensions; German version EN 251:2003) |
DIN EN 25136-1994 |
声学.由通风机辐射到导管的声功率测定,引入法 |
(Acoustics; determination of sound power radiated into a duct by fans; in-duct method (ISO 5136:1990 and Technical Corrigendum 1:1993); German version EN 25136:1993) |
DIN EN 2515-1991 |
航空和航天.可调带螺杆柄的单叉头.尺寸及负载 |
(Aerospace series; rod ends, adjustable single fork and threaded shank; dimensions and loads) |
DIN EN 2516-1997 |
航空和航天.耐蚀钢的钝化和镍合金的净化 |
(Aerospace series - Passivation of corrosion resistant steels and decontamination of nickel base alloys; German version EN 2516:1997) |
DIN EN 25163-1994 |
发动机和航空燃料.抗震性测定.发动机法 |
(Motor and aviation-type fuels; determination of knock characteristics; motor method (ISO 5163:1990); German version EN 25163:1993) |
DIN EN 25164-1994 |
发动机燃料.抗爆性测定.研究法 |
(Motor fuels; determination of knock characteristics; research method (ISO 5164:1990); German version EN 25164:1993) |
DIN EN 252-1990 |
木材防腐材料.测定与地面接触中木材防腐材料的相对防护作用的野外检测法 |
(Field test method for determining the relative protective effectiveness of a wood preservative in ground contact; german version EN 252:1989) |
DIN EN 25264-2-1994 |
纸浆.实验室打浆.第2部分:PFI碾磨法 |
(Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:1979); German version EN 25264-2:1994) |
DIN EN 25264-3-1994 |
纸浆.实验室打浆.第3部分:约克罗(JOKRO)碾磨法 |
(Pulps - Laboratory beating - Part 3: Jokro mill method (ISO 5264-3:1979); German version EN 25264-3:1994) |
DIN EN 253-2003 |
区域供暖管.直埋式供热网络用预隔热粘结管系统.钢制接用户管系的管组件.聚氨脂隔热层.聚乙烯外管套 |
(District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene; German version EN 253:2003) |
DIN EN 2536-1995 |
航空和航天.铝合金的硬度阳级氧化 |
(Aerospace series - Hard anodizing of aluminium alloys; German version EN 2536:1995) |
DIN EN 2544-1989 |
航空和航天.航空航天设备上的铆钉图示法 |
(Aerospace series; representation of rivets on drawings for aerospace equipment; german version EN 2544:1987) |
DIN EN 2545-1-1995 |
航空和航天.钛和钛合金预制材料和铸件.交货技术条件.第1部分:一般要求 |
(Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 1: General requirements; German version EN 2545-1:1995) |
DIN EN 2545-2-1995 |
航空和航天.钛和钛合金预制材料和铸件.交货技术条件.第2部分:预制材料 |
(Aerospace series - Titanium and titanium alloy remelting stock and castings; technical specification - Part 2: Remelting stock; German version EN 545-2:1995) |