标准号 |
中文名称 |
英文名称 |
| prEN 61009-2-2-1993 |
家用和类似用途的有综合过电流保护的剩余电流断路器（RCCBs)第２－２部分：通用规则对功能上与线电压有关 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs); part 2-2: applicability of the general rules to RCBOs functionally dependent on line voltage (IEC 61009-2-2:1991) |
| prEN 6101-2001 |
航空航天系列紧公差的100度中型平头铆钉英制系列 |
Aerospace series - Rivet, 100?medium flush head, close tolerance - Inch series |
| prEN 61010-2-010-2003 |
测量、控制和试验室用电气设备的安全要求第2-010部分：材料加热 用实验室设备的特殊要求 草案 |
IEC 61010-2-010, Ed. 2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of material |
| prEN 61010-2-041-1996 |
测量、控制和实验室用电气设备的安全要求第2－41部分：医疗材料处理及实验室加工用蒸压器的的特殊要求 |
Draft IEC 1010-2-041: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes |
| prEN 61010-2-051-2003 |
测量、控制和实验室用电气设备的安全要求第２－５１部分：机械搅拌用实验室设备的特殊要求 草案 |
IEC 61010-2-081, A1, Ed. 1: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
| prEN 61010-2-061-2003 |
测量、控制和实验室用电气设备的安全要求第２－６１部分：具有热原子化和离子化的试验室用原子能谱仪的特 |
IEC 61010-2-061, Ed. 2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization |
| prEN 61010-2-071-1998 |
测量、控制和实验室用电气设备的安全要求第2－71部分： |
IEC 61010-2-071: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-071: Particular requirements for equipment used in extended environments |
| prEN 61024-1-2000 |
建筑物的雷电防护带 |
Protection of structures against fire, explosion and life hazards |
| prEN 61029-2-11-2001 |
移动式电动工具的安全第２－１１部分：４５度角斜面接口椅的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws (IEC 61029-2-11:2001, modified) |
| prEN 61029-2-2-1997 |
移动式电动工具的安全第２－２部分：旋臂锯的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2: Particular requirements for radial arm saws (IEC 61029-2-2:1993, modified) |
| prEN 61029-2-3-1997 |
移动式电动工具的安全第２－３部分：刨和刨板机的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers (IEC 61029-2-3:1993, modified) |
| prEN 61029-2-6-1992 |
移动式电动工具的安全第２－６部分：注水金刚石钻的特殊要求 |
Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply |
| prEN 61029-2-7-1992 |
移动式电动工具的安全第２－７部分：注水金刚石锯的特殊要求 |
Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply |
| prEN 61029-2-8-2002 |
移动式电动工具的安全第２－８部分：单芯轴垂直模压机的特殊要求 |
Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders (IEC 61029-2-8:1995 + A1:1999 + A2:2001, modified) |
| prEN 61035-2-4-1995 |
电气装置用导管配件规范第２部分：特殊需要第４节：铝合金导管配件 |
Draft IEC 1035-2-4: Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 4: Conduit fittings of aluminium alloy |
| prEN 6104-2001 |
航空航天系列铝或铝合金实心铆钉技术规范 英制系列 |
Aerospace series - Rivets, solid, in aluminium or aluminium alloy - Inch series; Technical specification |
| prEN 61048-2001 |
管形荧光灯和其它放电电灯电路用电容器的一般要求和安全要求规范 草案 |
Draft IEC 61048, Ed. 2: Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements |
| prEN 61058-2-4-1994 |
电器用开关第2-4:的特殊要求草案 |
Draft IEC 61058-2-4: Switches for appliances - Part 2-4: Particular requirements for independently mounted switches |
| prEN 61076-2-101-2003 |
电子设备用连接器第2-101部分：低压、开关和控制装置用带有M8和M12螺旋接头以及弹簧锁的圆形连接器的空白 |
Connectors for electronic equipment - Part 2-101: Circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications |
| prEN 61076-2-103-2002 |
电子设备用连接器第2-103部分：多极系列连接器的详细规范 |
IEC 61076-2-103: Connectors for electronic equipment - Part 2-103: Detail specification for a range of multipole connectors (type XLR) |
| prEN 61076-6-2003 |
电子设备用连接器分规范第6部分：电连接器用可拆缷接触件 |
Connectors for electronic equipment - Part 6: Loose part contacts; Sectional specification |
| prEN 61079-4-1992 |
12GHz频带卫星广播传输接收机的测量方法第4部分：NTSC制式数字副载波系统的声音/数据解码器装置的电气测 |
Methods of measurement on receivers for broadcasting satellite transmissions in the 12 GHz band-Part 4: Electrical measurements on sound/data decoder units for the digital subcarrier/NTSC system |
| prEN 61086-1-2002 |
承载印制电路板用涂料(敷形涂层)第1部分：定义、分类和一般要求 |
IEC 61086-1, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements |
| prEN 61086-2-2002 |
承载印制电路板用涂料(保护涂层)第2部分：试验方法 |
IEC 61086-2, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test |
| prEN 61086-3-1-2002 |
承载印制电路板用涂料(保护涂层)第3部分：单项材料规范第1节：通用(I类)、高可靠性(II类)和航空涂料 |
IEC 61086-3-1, Ed. 2: Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials; Section 1: Coatings for general purpose (class 1), high reliability (class 2) and for aerospace (class 3) |
| prEN 61097-12-1996 |
全球海上遇险和安全系统(GMDSS)第12部分：救生船上的二路甚高频便携无线电话设备操作和性能要求、试验 |
Draft IEC 1097-12: Global Maritime Distress and Safety System (GMDSS) - Part 12: Survival craft portable two-way VHF radiotelephone apparatus - Operational and performance requirements, methods of testing and required test results |
| prEN 61097-1991 |
雷达应答器海上搜索和营救(SART ) 操作和性能要求试验方法和要求的试验结果 |
Radar transponder; marine search and rescue (SART); operational and performance requirements; methods of testing and required test results (IEC 80(Central Office)22) |
| prEN 61097-2-1994 |
全球海上遇险和安全系统(GMDSS)第2部分：COSPAS-SARSAT EPIRB-406MHz卫星紧急定位无线电信标操作和性能 |
Draft IEC 61097-2: Global maritime distress and safety system (GMDSS) - Part 2: COSPAS-SARSAT EPIRB - Satellite emergency position indicating radio beacon operating on 406 MHz - Operational and performance requirements, methods of testing and required te |
| prEN 61097-3-1993 |
全球海上遇险和安全系统(GMDSS)第3部分：数字选择呼叫(DSC)设备操作和性能要求、试验方法和要求的试验 |
Draft IEC 61097-3, part 3: global maritime distress and safety system (GMDSS); digital selective calling (DSC) equipment; operational and performance requirements; methods of testing and required testing results |
| prEN 61097-4-1994 |
全球海上遇险和安全系统(GMDSS)第4部分：INMARSAT-C 船载地面接收站和INMARSAT 增强群呼叫设备(EGC)操 |
Draft IEC 61097-4: Global maritime distress and safety system (GMDSS) - Part 4: INMARSAT-C ship earth station and INMARSAT enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results |
| prEN 61097-6-1994 |
全球海上遇险和安全系统(GMDSS)第6部分：船用导航、气象预报和船只应急信息接收窄带直接打印电报设备(NAV |
Draft IEC 61097-6: Global Maritime Distress and Safety System (GMDSS) - Part 6: Narrow band direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) - Operational and perfo |
| prEN 61097-7-1996 |
全球海上遇险和安全系统(GMDSS)第7部分：船用甚高频无线电话发射机和接收机操作和性能要求、试验方法和 |
Draft IEC 1097-7: Global maritime distress and safety system (GMDSS) - Part 7: Shipborne VHF radiotelephone transmitter and receiver - Operational and performance requirements, methods of testing and required test results |
| prEN 6110-2000 |
航空航天系列不锈钢100 平头盲螺栓 |
Aerospace series - Bolts, blind, 100?flush head, stainless steel |
| prEN 61108-1-2003 |
全球导航卫星系统(GNSS)第1部分：全球定位系统(GPS)接收机设备性能标准、试验方法和要求的试验结果 |
Maritime navigation and radiocommunication equipment and system - Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS); Receiver equipment; Performance requirements, methods of testing and required test results |
| prEN 61108-4-2003 |
海上导航和无线电通讯设备和系统全球导航卫星系统(GNSS)第4部分：船用DGPS and DGLONASS海上无线电接收 |
Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment; Performance requirements, methods of testing and required test r |
| prEN 61120-1-1992 |
专业用6.3mm磁带的数字音频盘式磁带盘录音系统第1部分：一般要求 |
Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use; part 1: general requirements (IEC 61120-1:1991) |
| prEN 61121-2003 |
家用滚筒式干衣机性能测量方法 |
Tumble dryers for household use - Methods for measuring the performance (IEC 61121:2002, modified) / Note: Endorsement notice |
| prEN 61128-1993 |
交流隔离器由隔离器转变总线变换电流 |
Alternating current disconnectors; bus-transfer current switching by disconnectors (IEC 61128:1992) |
| prEN 61130-1991 |
视频系统用Y/C连接器电气匹配值和连接器说明 |
Y/C connector for video systems; electrical matching values and description of the connector |
| prEN 61132-1991 |
具有系列结构产品的失效率预测 |
Failure rate prediction of items having a series structure |
| prEN 61133-1991 |
电气索引机车车辆电力和热力/电力机车车辆制成后和和投入运行前的试验方法 |
Future IEC publication 61133; electric traction; rolling stock; test methods of electric and thermal/electric rolling stock on completion of construction and before entry into service |
| prEN 61156-1991 |
数字通信用对绞或星绞多芯对称电缆的通用规范 |
Draft IEC 61156: generic specification for multicore and symmetrical pair/quad cables for digital communications |
| prEN 61158-2-2003 |
工业控制系统用范围总线标准第2部分：物理层规范和服务定义 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification (IEC 61158-2:200X - (65C/289/FDIS)) |
| prEN 61158-3-2003 |
测量和控制用数字数据通信工业控制系统用现场总线第3部分：数据链路服务定义 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link layer service definition (IEC 61158-3:200X - (65C/290/FDIS)) |
| prEN 61158-4-2003 |
测量和控制用数字数据通信工业控制系统用现场总线第4部分：数据链路协议规范 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link layer protocol specifications (IEC 61158-4:200X - (65C/291/FDIS)) |
| prEN 61158-5-2003 |
测量和控制用数字数据通信工业控制系统用现场总线第5部分：应用层服务定义 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definitions (IEC 61158-5:200X - (65C/292/FDIS)) |
| prEN 61158-6-2003 |
测量和控制用数字数据通信工业控制系统用现场总线第6部分：应用层协议规范 |
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification (IEC 61158-6:200X - (65C/293/FDIS)) |
| prEN 61164-2002 |
可靠性增长统计试验和估计方法 |
IEC 61164, Ed. 2. Reliability growth - Statistical test and estimation methods |
| prEN 61166-2001 |
额定电压达72.5 kV及以上值的开关和预制开关组件抗地震性能验证 |
Seismic qualification of switchgear and prefabricated switchgear assemblies for rated voltages of 72,5 kV and above |
| prEN 61175-1-1994 |
产品技术文献中使用的图形符号的设计第1部分：基本规则 |
Draft IEC 61175: Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules |
| prEN 61193-5-1999 |
软焊接第5部分：印制电路板组件缺陷的登记和分析 |
IEC 61193-5: Soft soldering - Part 5: Registration and analysis of defects on printed board assemblies |
| prEN 61241-0-2002 |
有可燃性粉尘场合用电气设备第0部分：一般要求 |
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| prEN 61241-1-1-1993 |
有可燃性粉尘场合用电气设备第1部分：外壳保护的电气设备第1节：设备规范 |
Electrical apparatus for use in the presence of combustible dust; part 1: electrical apparatus protected by enclosures; section 1: specification for apparatus |
| prEN 61241-1-2-1993 |
有可燃性粉尘场合用电气设备第1部分：外壳保护的电气设备第2节：设备的选择、安装和维修 |
Electrical apparatus for use in the presence of combustible dust; part 1: electrical apparatus protected by enclosures; section 2: selection, installation and maintenance of apparatus |
| prEN 61241-1-2002 |
有可燃性粉尘场合用电气设备第1部分：外壳保护tD |
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures tD |
| prEN 61241-10-2002 |
有可燃性粉尘场合用电气设备第10部分：存在或可能出现可燃性粉尘的地区的分类 |
Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present |
| prEN 61241-14-2002 |
有可燃性粉尘场合用电气设备第14部分：选择和安装 |
Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation |
| prEN 61241-18-2002 |
prEN 61241-18-2002 |
|
| prEN 61241-2-4-1993 |
有可燃性粉尘场合用电气设备第2部分：试验方法第4节：尘/气混合物最低易爆浓度的测定方法 |
Electrical apparatus for use in the presence of combustible dust; part 2: test methods; section 4: method for determining the minimum explosible concentration of dust/air mixtures |
| prEN 61249-2-1-2002 |
印制板和其它互连结构用材料第2-1部分：包被和非包被增强基材分规范集酚酝纤维纸增强层压薄板、经济级 |
IEC 61249-2-1, Ed. 1: Materials for printed boards and other interconnection structures - Part 2-1: Sectional specification set for reinforced base materials, clad and unclad; Phenolic cellulose paper reinforced laminate sheet, economic grade,copper clad |
| prEN 61249-2-11-2003 |
印制板和其它互连结构用材料第2-11部分：包被和非包被增强基材分规范集聚酰亚胺 、阻燃型(垂直燃烧试 |
IEC 61249-2-11, Ed. 1: Materials for printed boards and other interconnection structures - Part 2-11: Reinforced base materials, clad and unclad; Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined f |
| prEN 61249-2-2-2002 |
印制板和其它互连结构用材料第2-2部分：包被和非包被增强基材分规范集酚酝纤维纸增强层压板、强电级、 |
IEC 61249-2-2: Materials for printed boards and other interconnection structures - Part 2-2: Sectional specification set for reinforced base materials, clad and unclad; Phenolic cellulose paper reinforced laminate, high electrical grade, copper clad |
| prEN 61249-2-21-2003 |
印制板和其它互连结构用材料第2-21部分：包被和非包被增强基材分规范集阻燃型(垂直燃烧试验)铜包被的编 |
IEC 61249-2-21, Ed. 1: Materials for printed boards and other interconnection structures - Part 2-21: Reinforced base materials, clad and unclad; Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning |
| prEN 61249-2-5-2003 |
印制板和其它互连结构用材料第2-5部分：包被和非包被增强基材分规范集阻燃型(垂直燃烧试验)铜包被的溴 |
IEC 61249-2-5, Ed. 1: Materials for printed boards and other interconnection structures - Part 2-5: Reinforced base materials, clad and unclad; Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defin |
| prEN 61249-2-6-2003 |
印制板和其它互连结构用材料第2-6部分：包被和非包被增强基材分规范集阻燃型(垂直燃烧试验)铜包被的非 |
IEC 61249-2-6, Ed. 1: Materials for printed boards and other interconnection structures - Part 2-6: Reinforced base materials, clad and unclad; Brominated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burnin |
| prEN 61249-4-1-2001 |
印制板和其它互连结构用材料第4部分：非包被预浸处理材料分规范集第1节：阻燃型(垂直燃烧试验)编织E-玻 |
IEC 61249-4-1 Ed. 1: Materials for printed boards and other interconnecting structures - Part 4: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards); Section 1: Epoxide woven E-glass prepreg of defined fla |
| prEN 61279-1993 |
分规范光学电信电缆 |
IEC 61279; sectional specification; optical telecommunication cables |
| prEN 61280-3-2-1998 |
光纤通信子系统基本试验程序第3-2部分：模拟系统试验程序视频系统的载波-噪声系数测量 |
IEC 61280-3-2: Fibre optic communication subsystem basic test procedures - Part 3-2: Test procedures for analogue systems - Carrier-to-noise ratio measurements for video systems |
| prEN 61280-3-3-1998 |
光纤通信子系统基本试验程序第3-3部分：模拟系统试验程序视频系统复合二级失真测量 |
IEC 61280-3-3: Fibre optic communication subsystem basic test procedures - Part 3-3: Test procedures for analogue systems - Composite second-order distortion measurements for video systems |
| prEN 61280-3-4-1998 |
光纤通信子系统基本试验程序第3-4部分：模拟系统试验程序视频系统用合成三重差拍次噪声测量 |
IEC 61280-3-4: Fibre optic communication subsystem basic test procedures - Part 3-4: Test procedures for analogue systems - Composite triple-beat noise measurement for video systems |
| prEN 61280-3-5-1998 |
光纤通信子系统基本试验程序第3-5部分：模拟系统试验程序视频系统交叉调制测量 |
IEC 61280-3-5: Fibre optic communication subsystem basic test procedures - Part 3-5: Test procedures for analogue systems - Cross modulation measurement for video systems |
| prEN 61280-3-6-1998 |
光纤通信子系统基本试验程序第3-6部分：模拟系统试验程序视频系统接收器灵敏度测量 |
IEC 61280-3-6: Fibre-optic communication subsystem basic test procedures - Part 3-6: Test procedures for analogue systems - Receiver sensitivity measurement for video systems |
| prEN 61280-3-7-1998 |
光纤通信子系统基本试验程序第3-7部分：模拟系统试验程序发射机或接收机带宽的测量 |
IEC 6128-3-7: Fibre optic communication subsystem basic test procedures - Part 3-7: Test procedures for analogue systems - Transmitter or receiver bandwidth measurement |
| prEN 61290-4-1-1999 |
光纤放大器试验方法的基础规范第4-1部分：模拟参数的模拟试验方法用宽带源试验方法测定增益斜率 |
IEC 61290-4-1: Basic specification for optical fibre amplifier test methods - Part 4-1: Test methods analogue for analogue parameters - Gain-slope by broad-band source test method |
| prEN 61295-1995 |
广播磁带录像机用校准带 |
Calibration tapes for broadcast VTRs (IEC 61295:1994) |
| prEN 61300-2-22-2001 |
基本试验和测量程序第2-22部分：试验：温度变化 |
IEC 61300-2-22, Ed. 2: Basic test and measurement procedures - Part 2-22: Tests; Change of temperature |
| prEN 61334-3-1-1998 |
采用配电线载波系统的配电自动化第3-1部分：主干线信号传输要求频带和输出电平 |
Draft IEC 61334-3-1: Distribution automation using distribution line carrier systems - Part 3-1: Mains signalling requirements - Frequency bands and output levels |
| prEN 61337-1-2-1999 |
采用波导型介电谐振器的滤波器第1-2部分：试验条件 |
Draft IEC 61337-1-2: Filters using waveguide type dielectric resonators - Part 1-2: Test conditions |
| prEN 61338-1-1-1997 |
波导型介电谐振器第1部分：一般信息和试验条件第1节：一般信息 |
Waveguide type dielectric resonators - Part 1: General information and test conditions - Section 1: General information (IEC 61338-1-1:1996) |
| prEN 61338-1-2-1998 |
波导型介电谐振器第1-2部分：试验条件 |
Draft IEC 61338-1-2: Waveguide type dielectric resonators - Part 1-2: Test conditions |
| prEN 61340-4-1-2003 |
静电第4-1部分：对于专门用途的标准试验方法地板覆盖物和已装修地板的静电特性 |
IEC 61340-4-1, Ed. 2: Electrostatics - Part 4-1: Standard test methods for specific applications; Electrical resistance of floor coverings and installed floors |
| prEN 61372-2001 |
汽轮机及其循环的简化热性能试验 |
Simplified thermal performance testing of steam turbines and their cycles |
| prEN 61386-1-2002 |
电气装置用导管系统第1部分：一般要求 |
Conduit systems for electrical installations - Part 1: General requirements (IEC 61386-1:1996 + A1:2000) |
| prEN 61393-1997 |
感应或静电计用脉冲输出装置 |
Pulse output devices for induction or static meters (2 wires only) |
| prEN 61400-1-2003 |
风轮发电机系统第1部分：安全要求 |
Wind turbine generator systems - Part 1: Safety requirements (IEC 61400-1:1999, modified) / Note: Intended as replacement for ENV 61400-1 (1995-02). |
| prEN 61472-2003 |
带电作业最小安全距离计算方法 |
IEC 61472, Ed. 2.0: Live working - Minimum approach distances for A.C. systems in the voltage range 72,5 kV to 800 kV - A method of calculation |
| prEN 61496-1-2003 |
机械安全电敏保护设备第1部分：一般要求和试验 |
IEC 61496-1: Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| prEN 61506-1996 |
过程控制系统软件和设备的文件编制 |
Documentation of software for process control systems and facilities |
| prEN 61520-1999 |
温度计敏感器用金属温度计套管功能尺寸 |
IEC 61520: Metal thermowells for thermometer sensors - Functional dimensions |
| prEN 61535-2003 |
用于固定安装固定连接的安装连接器 |
IEC 61535, Ed. 1: Installation couplers intended for permanent connection in fixed installations |
| prEN 61545-1995 |
组安全出版物连接器件任何材料的夹紧装置中的铝线和铝包夹紧装置中铜线的连接器件 |
Draft IEC 1545: Group safety publication: Connecting devices - Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units |
| prEN 61554-1999 |
盘装式设备电测量仪表盘装尺寸 |
IEC 61554: Panel mounted equipment - Electrical measuring instruments - Dimensions for panel mounting |
| prEN 61587-3-1998 |
IEC 60917和IEC 60297系列机箱、机柜和分机柜的电磁屏蔽性能试验 |
Draft IEC 61587-3: Electromagnetic shielding performance tests for cabinets, racks and subracks for the IEC 60917 and 60297 series |
| prEN 616-1991 |
连续操作设备和系统 设计、制造、安装和试运转阶段的通用安全要求 |
Continuous handling equipment and systems; common safety requirements for design, manufacturing, erection and commissioning stages |
| prEN 61603-7-2003 |
采用红外辐射的音频和/或视频及相关信号的传输第7部分：会议及类似用途的音频信号的数字传输系统 |
IEC 61603-7: Transmission systems for audio and/or video and related signals using infrared radiation - Part 7: Transmission systems for digital audio signals for conference and similar applications (TA3) |
| prEN 61606-1-2003 |
音频和视听设备数字音频部件音频特性的基本测量方法第1部分：总则 |
IEC 61606-1: Audio and audiovisual equipment - Digital audio parts; Basic measurement methods of audio characteristics - Part 1: General |
| prEN 61606-2-2003 |
音频和视听设备数字音频部件音频特性的基本测量方法第2部分：消费者使用 |
IEC 61606-2: Audio and audiovisual equipment - Digital audio parts; Basic measurement methods of audio characteristics - Part 2: Consumer use |
| prEN 61643-1-2000 |
与低压配电系统连接的浪涌保护装置第1部分：要求和试验 |
Surge protective devices connected to low-voltage power systems - Part 1: Requirements and tests (IEC 61643-1:1998 + corrigendum 1998, modified) |
| prEN 61643-12-2000 |
与低压配电系统连接的浪涌保护装置第12部分：选择和应用原则 |
Draft IEC 61643-12: Surge protective devices connected to low-voltage power distribution systems - Part 12: Selection and application principles |
| prEN 61643-2-1998 |
与低压配电系统连接的浪涌保护装置第2部分：选择和应用原则 |
Draft IEC 61643-2: Surge protective devices connected to low-voltage power distribution systems - Part 2: Selection and application principles |
| prEN 61644-1-1998 |
与电信和信号网络连接的浪涌保护装置第1部分：性能要求和试验方法 |
IEC 61644-1: Surge protective devices connected to telecommunications and signalling network - Part 1: Performance requirements and testing methods |
| prEN 61644-21-2000 |
与电信和信号网络连接的浪涌保护装置第21部分：性能要求和试验方法 |
IEC 61644-21: Surge protective devices connected to telecommunications and signalling network - Part 21: Performance requirements and testing methods |
| prEN 61647-1-2001 |
低压浪涌保护装置件第1部分：气体放电管规范 |
IEC 61647-1, Ed. 1: Components for low-voltage surge protective devices - Part 1: Specification for gas discharge tubes (GDT) |
| prEN 61647-2-2001 |
低压浪涌保护装置件第2部分：雪崩击穿二极管规范 |
IEC 61647-2, Ed. 1.0: Components for low-voltage surge protection devices - Part 2: Specifications for Avalanche Breakdown Diode (ABD) |
| prEN 61647-3-2001 |
低压浪涌保护装置件第3部分：金属氧化变阻器规范 |
Components for low-voltage surge protective devices - Part 3: Specifications for metal oxide varistor |
| prEN 61647-4-2001 |
低压浪涌保护装置件第4部分：闸流管浪涌抑制器规范 |
IEC 61647-4, Ed. 1: Components for low-voltage surge protective devices - Part 4: Specification for thyristor surge suppressor (TSS) |
| prEN 61660-3-1998 |
电厂和变电站直流辅助设施中的短路电流第3部分：计算举例 |
IEC 61660-3: Short-circuit currents in DC auxiliary installations in power plants and substations - Part 3: Examples of calculation |
| prEN 61681-1-2000 |
超声学场安全第1部分： 医疗诊断超声波场分类表 |
IEC 61681-1: Ultrasonics - Field safety - Part 1: Classification scheme for medical diagnostic ultrasonic fields |
| prEN 61714-2-1997 |
产品技术文献中使用的图形符号设计第2部分：包括引用库图形符号在内的计算机敏感形式图形符号及其互换要 |
IEC 61714-2: Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interch |
| prEN 61747-6-2002 |
液晶和固态显示器件第6部分：液晶模块的测量方法传输型 |
Liquid crystal and solid-state display devices - Part 6: Measuring methods for liquid crystal modules; Transmissive type |
| prEN 61753-061-3-2002 |
光纤互连器件和无源件性能标准第061-3部分：U类单模尾光纤隔离器非受控环境 |
IEC 61753-061-3: Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U; Uncontrolled environment |
| prEN 61753-091-3-2002 |
光纤互连器件和无源件性能标准第091-3部分：U类单模尾光纤循环器非受控环境 |
IEC 61753-091-3: Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single mode fibre optic pigtailed style circulators for category U; Uncontrolled environment |
| prEN 61753-2-6-2001 |
光纤互连器件和无源件性能标准第2-6部分：U类单模尾式光纤持续可变衰减器非受控环境 |
IEC 61753-2-6: Fibre optic interconnecting devices and passive components performance standard - Part 2-6: Single mode fibre pigtailed style continuously variabel attenuators for category U; Uncontrolled environment |
| prEN 61753-3-1-2001 |
光纤互连器件和无源件性能标准第3-1部分：C类单模光纤非连接DWDM装置受控环境 |
IEC 61753-3-1, Ed. 1.0: Fibre optic interconnecting devices and passive components performance standard - Part 3-1: Single-mode fibre optic non-connectorised DWDM devices for category C; Controlled environment |
| prEN 61753-3-2-2001 |
光纤互连器件和无源件性能标准第3-2部分：连接到C类的单模端接光纤连接器受控环境 |
IEC 61753-3-2, Ed. 1: Fibre optic passive components performance standard - Part 3-2: Fibre optic connectors terminated on single mode fibre to category C; Controlled environment |
| prEN 61775-1-1994 |
产品技术文献中使用的图形符号设计第1部分：基本规则 |
Draft IEC 1775: Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules |
| prEN 61786-1998 |
关于人体暴露的低频电场和磁场的测量仪表的特殊要求和测量指南 |
Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings - Special requirements for instruments and guidance for measurement |
| prEN 61804-1-2001 |
程序控制功能块第1部分：一般要求 |
Function blocks for process control - Part 1: General requirements |
| prEN 61804-2-2003 |
程序控制功能块第2部分：功能块概念和电子装置描述语言的规范 |
Function Blocks (FB) for process control - Part 2: Specification of FB concept and Electronic Device Description Language (EDDL) |
| prEN 61810-7-1997 |
机电式非定时限有或无继电器第7部分：试验和测量程序 |
Draft IEC 61810-7: Electromechanical all-or-nothing relays - Part 7: Test and measurement procedures |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com