标准号 |
中文名称 |
英文名称 |
| BS EN 12519-2004 |
窗户和人行门.术语 |
|
| BS EN 1252-1-1998 |
低温容器.材料.温度低于-80℃时的强度要求 |
(Cryogenic vessels - Materials - Toughness requirements for temperatures below -80 鳦) |
| BS EN 1252-2-2001 |
低温容器.材料.温度在-80--20度的强度要求 |
(Cryogenic vessels - Materials - Toughness requirements for temperatures between -80 鳦 and -20 鳦) |
| BS EN 125200-1978 |
电子器件质量评定协调体系.分规范.线性变压器用磁性氧化铁芯 |
(Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for linear transformers) |
| BS EN 12522-1-1998 |
家具搬运业.私用家具搬运.服务规范 |
(Furniture removal activities - Furniture removal for private individuals - Service specification) |
| BS EN 12522-2-1998 |
家具搬运业.私用家具搬运.服务条款 |
(Furniture removal activities - Furniture removal for private individuals - Provision of service) |
| BS EN 12523-1999 |
外肢修复和外肢矫形.要求和试验方法 |
(External limb prostheses and external orthoses - Requirements and test methods) |
| BS EN 12524-2000 |
建筑材料和产品.冷热特性.列表设计阀门 |
(Building materials and products - Hygrothermal properties - Tabulated design values) |
| BS EN 12525-2000 |
农用机械.前装载机.安全 |
(Agricultural machinery - Front loaders - Safety) |
| BS EN 12526-1999 |
脚轮和轮子.词汇,推建用符号和多语种词表 |
(Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary) |
| BS EN 12527-1999 |
脚轮和轮子.试验方法和试验设备 |
(Castors and wheels - Test methods and apparatus) |
| BS EN 12528-1999 |
脚轮和轮子.家具用脚轮.要求 |
(Castors and wheels - Castors for furniture - Requirements) |
| BS EN 12529-1999 |
脚轮和轮子.家具用脚轮.转椅用脚轮.要求 |
(Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements) |
| BS EN 1253-1-2003 |
建筑物雨水口.要求 |
(Gullies for buildings - Requirements) |
| BS EN 1253-3-1999 |
建筑物集水沟.质量控制 |
(Gullies for buildings - Quality control) |
| BS EN 1253-4-2000 |
建筑物集水沟.通路盖 |
(Gullies for buildings - Access covers) |
| BS EN 1253-5-2003 |
建筑物集水沟.可截流轻液体的集水沟 |
(Gullies for buildings - Gullies with light liquids closure) |
| BS EN 12530-1999 |
脚轮和轮子.手动操作的脚轮和轮子 |
(Castors and wheels - Castors and wheels for manually propelled institutional applications) |
| BS EN 12531-1999 |
脚轮和轮子.病床用脚轮 |
(Castors and wheels - Hospital bed castors) |
| BS EN 12532-1999 |
脚轮和轮子.速度在1,1米/秒(4公里/小时)以下的运输装置用轮子 |
(Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h)) |
| BS EN 12533-1999 |
脚轮和轮子.速度在1,1米/秒(4公里/小时)以上,4,4米/秒(16公里/小时)以下运输装置用的脚轮和轮子 |
(Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h)) |
| BS EN 12534-1999 |
焊接消耗品.高强度钢气体保护金属弧焊镀层和焊条,金属线,金属电极.分类 |
(Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels - Classification) |
| BS EN 12535-2000 |
焊接材料.高强度钢的气体保护金属电弧焊接用管状芯电极.分类 |
(Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification) |
| BS EN 12536-2000 |
焊料.非合金钢和抗蠕变钢的气体焊接用焊条.分类 |
(Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification) |
| BS EN 1254-1-1998 |
铜和铜合金.管件接头.铜管毛细管钎焊法或紧隙铜焊法用端头接头 |
(Copper and copper alloys - Plumbing fittings - Fittings with ends for capillary soldering or capillary brazing to copper tubes) |
| BS EN 1254-2-1998 |
铜和铜合金.管件接头.与铜管一起使用的压合接头 |
(Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with copper tubes) |
| BS EN 1254-3-1998 |
铜和铜合金.管件接头.与塑料管一起使用的压合接头 |
(Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with plastics pipes) |
| BS EN 1254-4-1998 |
铜和铜合金.管件接头.与毛细管或压缩端连接的其它端头一起使用的接头 |
(Copper and copper alloys - Plumbing fittings - Fittings combining other end connections with capillary or compression ends) |
| BS EN 1254-5-1998 |
铜和铜合金.管件接头.铜管紧隙铜焊法用短端头接头 |
(Copper and copper alloys - Plumbing fittings - Fittings with short ends for capillary brazing to copper tubes) |
| BS EN 12540-2000 |
金属的腐蚀防护.镍、镍加铬、铜加镍和铜加镍加铬的电解镀层 |
(Corrosion protection of metals - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium) |
| BS EN 125400-1984 |
电子器件质量评定协调体系.分规范.电感器和调谐变压器与磁性氧化铁芯一起使用的调节器 |
(Harmonized system of quality assessment for electronic components: sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers) |
| BS EN 125401-1984 |
电子件的质量保证协调体系.空白详细规范.电感器和调谐变压器用具有磁性氧化(铁)线圈的调整器 |
(Harmonized system of quality assessment for electronic components - Blank detail specification - Adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers) |
| BS EN 12541-2003 |
卫生便池.压力冲洗阀和自动关闭便池冲水阀PN10 |
(Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10) |
| BS EN 12542-2002 |
安装在地面上的储存容量最多不超过13M |
(Static welded cylindrical tanks, serially produced for the storage of Liquefied petroleum gas (LPG) having a volume not greater than 13 mUP3 and for installation above ground - Design and manufacture) |
| BS EN 12543-1-1999 |
无损检验.用于无损检验的工业X射线系统中焦点的特性.扫描方法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Scanning method) |
| BS EN 12543-2-1999 |
无损检验.用于无损检验的工业X射线系统中焦点的特性.针孔摄影机射线照相方法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Pinhole camera radiographic method) |
| BS EN 12543-3-1999 |
无损检验.用于无损检验的工业X射线系统中焦点的特性.狭缝摄影机射线照相方法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Slit camera radiographic method) |
| BS EN 12543-4-1999 |
无损检验.用于无损检验的工业X射线系统中焦点的特性.边缘方法 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Edge method) |
| BS EN 12543-5-1999 |
无损检验.用于无损检验的工业X射线系统中焦点的特性.小型和微型聚焦X射线管有效焦点尺寸的测量 |
(Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Measurement of the effective focal spot size of mini and micro focus X-ray tub) |
| BS EN 12544-1-1999 |
无损检验.X射线管电压的评估和测量.电压分压法 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Voltage divider method) |
| BS EN 12544-2-2000 |
无损检验.X射线管电压的测量和评估.用厚滤膜法进行连续检验 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Constancy check by the thick filter method) |
| BS EN 12544-3-1999 |
无损检验.X射线管电压的评估和测量.度谱法 |
(Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Spectrometric method) |
| BS EN 12545-2000 |
鞋靴、皮革和人造革制品生产机械.噪声试验规程.通用要求 |
(Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements) |
| BS EN 12546-1-2000 |
与食品接触的材料和物品.家用保温容器.真空器皿、保温瓶和保温壶规范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Specification for vacuum ware, insulated flasks and jugs) |
| BS EN 12546-2-2000 |
与食品接触的材料和物品.家用保温容器.保温袋和保温箱规范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Specification for insulated bags and boxes) |
| BS EN 12546-3-2000 |
与食品接触的材料和物品.家用保温容器.热包装材料规范 |
(Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Specification for thermal packs) |
| BS EN 12547-1999 |
离心机.通用安全要求 |
(Centrifuges - Common safety requirements) |
| BS EN 12548-1999 |
铅和合金.电缆铠和护套用铅合金铸锭 |
(Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves) |
| BS EN 12549-1999 |
声学.紧固件驱动工具的噪声试验规范.工程法 |
(Acoustics - Noise test code for fastener driving tools - Engineering method) |
| BS EN 1255-1996 |
内河航运船只.旋臂起重机 |
(Inland navigation vessels - Swing derricks) |
| BS EN 125500-1996 |
电子件质量评定的协调系统.分规范:干扰抑制和低级信号传输用环形氧化物磁芯 |
(Harmonized system of quality assessment for electronic components - Sectional specification: magnetic oxide ring cores for interference suppression and low level signal transformer applications) |
| BS EN 1256-1996 |
气焊设备.焊接、切割和联接处理设备的软管附件规范 |
(Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes) |
| BS EN 12560-1-2001 |
法兰及其接头.标示等级的法兰的衬垫.有或物插孔的非金属水平衬垫 |
(Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic flat gaskets with or without inserts) |
| BS EN 12560-2-2001 |
法兰及其接头.标示等级的法兰的衬垫.钢法兰用螺旋缠绕衬垫 |
(Flanges and their joints - Gaskets for Class-designated flanges - Spiral wound gaskets for use with steel flanges) |
| BS EN 12560-3-2001 |
法兰及其接头.标示等级的法兰的衬垫.非金属PTFE外壳衬垫 |
(Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic PTFE envelope gaskets) |
| BS EN 12560-4-2001 |
法兰及其接头.标示等级的法兰的衬垫.钢法兰用的波纹状、水平的或皱缩金属和填充金属衬垫 |
(Flanges and their joints - Gaskets for Class-designated flanges - Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges) |
| BS EN 12560-5-2001 |
法兰及其接头.标示等级的法兰的衬垫.钢法兰用的金属环接头衬垫 |
(Flanges and their joints - Gaskets for Class-designated flanges - Metallic ring joint gaskets for use with steel flanges) |
| BS EN 12560-7-2004 |
法兰及其接头.分级标示法兰用垫圈.钢法兰用涂覆金属的套层垫圈 |
|
| BS EN 12561-1-1999 |
铁路工具.有轨车.危险货物运输油罐车标记 |
(Railway applications - Tank wagons - Marking of tank wagons for the carriage of dangerous goods) |
| BS EN 12561-2-2003 |
铁路设施.油罐车.包括回流蒸气的液体产品用底卸式装置 |
(Railway applications - Tank wagons - Bottom emptying devices for liquid products including vapour return) |
| BS EN 12561-3-2003 |
铁路设施.油罐车.压力下液化气用底部装卸式装置 |
(Railway applications - Tank wagons - Bottom filling and emptying devices for gases liquefied under pressure) |
| BS EN 12561-4-2003 |
铁路设施.油罐车.液态产品用顶部装卸式装置 |
(Railway applications - Tank wagons - Top devices for top emptying and filling of liquid products) |
| BS EN 12561-5-2003 |
铁路设施.油罐车.液态产品用顶部装填、底部卸料式装置 |
(Railway applications - Tank wagons - Top devices for bottom emptying and top filling of liquid products) |
| BS EN 12561-6-2003 |
铁路设施.油罐车.人孔 |
(Railway applications - Tank wagons - Manholes) |
| BS EN 12561-7-2004 |
铁路设施.油罐车.月台和梯子 |
|
| BS EN 12561-8-2004 |
铁路设施.油罐车.加热连接件 |
|
| BS EN 12562-1999 |
纺织品.对芳香聚酰胺复丝纱线.试验方法 |
(Textiles - Para-aramid multifilament yarns - Test methods) |
| BS EN 12563-1999 |
非活性外科植入物.关节替代植入物.髋关节替代植入物的特殊要求 |
(Non-active surgical implants - Joint replacement implants - Specific requirements for hip joint replacement implants) |
| BS EN 12564-1999 |
非活性外科植入物.关节替代植入物.膝关节替代植入物的特殊要求 |
(Non-active surgical implants - Joint replacement implants - Specific requirements for knee joint replacement implants) |
| BS EN 12566-1-2000 |
高达50PT的小型废水处理系统.预制的化粪池 |
(Small wastewater treatment systems for up to 50 PT - Prefabricated septic tanks) |
| BS EN 12567-2000 |
工业阀门.液化天然气用隔离阀.适用性验证试验规范 |
(Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests) |
| BS EN 12568-1998 |
脚和腿的保护物.脚趾套和抗金属刺入插入物的要求和试验方法 |
(Foot and leg protectors - Requirements and test methods for toecaps and metal penetration resistant inserts) |
| BS EN 12569-1999 |
工业阀门.化学和岩石化学工艺工业阀门.要求和试验 |
(Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests) |
| BS EN 12570-2000 |
工业阀门.操作件尺寸控制的方法 |
(Industrial valves - Method for sizing the operating element) |
| BS EN 12571-1999 |
与食品有关的材料和物品.与装有成品食品容器相应的运输单.热和卫生要求和试验 |
(Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing) |
| BS EN 12572-1999 |
人造攀援结构.保护点,稳定性要求和试验方法 |
(Artificial climbing structures - Protection points, stability requirements and test methods) |
| BS EN 12573-1-2000 |
焊接的固定无压热塑性水箱.一般原理 |
(Welded static non-pressurized thermoplastic tanks - General principles) |
| BS EN 12573-2-2000 |
焊接静态非压力热塑罐.垂直圆柱形罐的计算 |
(Welded static non-pressurized thermoplastic tanks - Calculation of vertical cylindrical tanks) |
| BS EN 12573-3-2000 |
焊接静态非压力热塑罐.单层矩形罐的设计和计算 |
(Welded static non-pressurized thermoplastic tanks - Design and calculation for single skin rectangular tanks) |
| BS EN 12573-4-2000 |
焊接静态非压力热塑罐.法兰接头的设计和计算 |
(Welded static non-pressurized thermoplastic tanks - Design and calculation of flanged joints) |
| BS EN 12574-1-2002 |
固定的废弃物容器.耳轴、双耳轴或袖珍提升装置用带平或圆形罩的1700l-5000l容量的容器.尺寸和设计 |
(Stationary waste containers - Containers with a capacity from 1700 l to 5000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting devices - Dimensions and design) |
| BS EN 12574-2-2002 |
固定的废弃物容器.性能要求和试验方法 |
(Stationary waste containers - Performance requirements and test methods) |
| BS EN 12574-3-2002 |
固定的废弃物容器.安全要求和健康要求 |
(Stationary waste containers - Safety and health requirements) |
| BS EN 12575-1998 |
塑料.热固模塑复合物.SMC中纤维浸湿程度的测定 |
(Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC) |
| BS EN 12576-1998 |
塑料.纤维增强复合物.SMC、BMC和DMC的压缩模制试验板的预先制备 |
(Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC) |
| BS EN 12579-2000 |
土壤改良剂和生长基质.取样 |
(Soil improvers and growing media - Sampling) |
| BS EN 12580-2000 |
土壤改良剂和生长基质.量值的测定 |
(Soil improvers and growing media - Determination of a quantity) |
| BS EN 12582-1999 |
表面活性剂.按照HPLC/ELSD法测定非离子表面活性剂(乙氧基)中摩尔质量的方法测定聚乙二醇含量 |
(Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD) |
| BS EN 12583-2000 |
供气系统.压缩机泵站.功能要求 |
(Gas supply systems - Compressor stations - Functional requirements) |
| BS EN 12584-1999 |
氧气火焰切割、激光束切割和等离子体切割的缺陷.术语 |
(Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology) |
| BS EN 12585-1999 |
玻璃装置、管道和管件.DN 15至DN 1000的管道和管件.相容性和可互换性 |
(Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability) |
| BS EN 12586-1999 |
儿童护理物品.安慰奶嘴夹.安全要求和试验方法 |
(Child care articles - Soother holder - Safety requirements and test methods) |
| BS EN 12588-1999 |
铅和铅合金.建筑用轧制薄铅板 |
(Lead and lead alloys - Rolled lead sheet for building purposes) |
| BS EN 12589-2001 |
建筑物通风.空调终端设备.空气动力试验和恒定值以及变率终端设备 |
(Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units) |
| BS EN 12590-2000 |
纺织品.完全或部分用合成纤维制的工业缝纫线 |
(Textiles - Industrial sewing threads made wholly or partly form synthetic fibres) |
| BS EN 12591-2000 |
沥青和沥青粘合剂.铺路级沥青规范 |
(Bitumen and bituminous binders - Specifications for paving grade bitumens) |
| BS EN 12592-2000 |
石油及其制品的试验方法.BS 2000-47.沥青和沥青粘合剂.溶解度的测定 |
(Methods of test for petroleum and its products - BS 2000-47: Bitumen and bituminous binders - Determination of solubility) |
| BS EN 12593-2000 |
石油及其制品的试验方法.沥青和沥青粘合剂.Fraass断裂点的测定 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the Fraass breaking point) |
| BS EN 12594-2000 |
石油及其产品的试验方法沥青和沥青粘合剂.试样的制备 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Preparation of test samples) |
| BS EN 12595-2000 |
石油及其产品的试验方法.沥青和沥青粘合剂.运动粘度的测定 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of kinematic viscosity) |
| BS EN 12596-2000 |
石油及其产品的试验方法.沥青和沥青粘合剂.用真空毛细管测定动力粘度 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary) |
| BS EN 12597-2000 |
沥青及沥青粘合剂.术语 |
(Bitumen and bituminous binders - Terminology) |
| BS EN 12598-1999 |
病人呼吸混合物用氧气监测器.特殊要求 |
(Oxygen monitors for patient breathing mixtures - Particular requirements) |
| BS EN 12599-2000 |
建筑物通风.安装通风和空调系统的试验规程和测量方法 |
(Ventilation for buildings - Tests procedures and measuring methods for handing over installed ventilation and air conditioning systems) |
| BS EN 126-1995 |
燃气器具的多功能控制器 |
(Multifunctional controls for gas burning appliances) |
| BS EN 126-2004 |
燃气器具的多功能控制器 |
|
| BS EN 12600-2003 |
建筑玻璃.摆锤式试验.冲击试验方法和平面玻璃分类 |
(Glass in building - Pendulum test - Impact test method and classification for flat glass) |
| BS EN 12601-2001 |
驱动发电装置的往复式内燃机引擎 |
(Reciprocating internal combustion engine driven generating sets - Safety) |
| BS EN 12603-2003 |
建筑玻璃.魏布尔分布玻璃强度数据用置信区间和适配性规程 |
(Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data) |
| BS EN 12604-2000 |
工业,商业和车间门和大门.机械方面的要求 |
(Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements) |
| BS EN 12605-2000 |
工业,商业和车间门和大门.机械方面的试验方法 |
(Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods) |
| BS EN 12606-1-2000 |
石油及其制品的试验方法.沥青和沥青粘合剂.石蜡含量的测定.蒸馏法 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the paraffin wax content - Method by distillation) |
| BS EN 12606-2-2000 |
石油及其制品的试验方法.沥青和沥青粘合剂.石蜡含量的测定.萃取法 |
(Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the paraffin wax content - Method by extraction) |
| BS EN 12607-1-2000 |
石油及其制品的试验方法.沥青和沥青粘合剂.在热和空气影响下抗硬化的测定.RTFOT法 |
(Methods of test for petroleum and its products - Bitumen and bitumenous binders - Determination of the resistance to hardening under the influence of heat and air - RTFOT method) |
| BS EN 12607-2-2000 |
石油及其制品的试验方法.沥青和沥青粘合剂.在热和空气影响下抗硬化的测定.TFOT法 |
(Methods of test for petroleum and its products - Bitumen and bitumenous binders - Determination of the resistance to hardening under the influence of heat and air - TFOT Method) |
| BS EN 12607-3-2000 |
石油及其制品的试验方法.沥青和沥青粘合剂.在热和空气影响下抗硬化的测定.RFT法 |
(Methods of test for petroleum and its products - Bitumen and bitumenous binders - Determination of the resistance to hardening under the influence of heat and air - RFT Method) |
| BS EN 12608-2003 |
门窗制备用未增塑聚氯乙烯(PVC-U)型材.分类、要求和试验方法 |
(Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods) |
| BS EN 1261-1995 |
一般用途纤维绳索.大麻绳 |
(Fibre ropes for general service - Hemp) |
| BS EN 12613-2001 |
具有视觉特性的地下电缆和管道用塑料警告装置 |
(Plastic warning devices for underground cables and pipelines with visual characteristics) |
| BS EN 12614-2004 |
混凝土结构的保护和维修用产品和系统.试验方法.聚合物的玻璃化转变温度的测定 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com