标准号 |
中文名称 |
英文名称 |
| EN ISO 15254-2002 |
眼科光学和仪器矫正弱视力用光电装置 |
Ophthalmic optics and instruments - Electro-optical devices for enhancing low vision (ISO 15254:2002) |
| EN ISO 15265-2004 |
热环境的人类工效学.热工作环境中防止压力和不适的风险评估策略 |
|
| EN ISO 1530-2003 |
渔网打结网片的描述和设计 |
Fishing nets - Description and designation of knotted netting (ISO 1530:2003) |
| EN ISO 15301-2001 |
动植物脂肪和油粗脂肪和油中沉积物的测定离心法 |
Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001) |
| EN ISO 15304-2002 |
动植物脂肪和油植物脂肪和油中过脂肪酸异构体含量测定气相色谱法 |
Animal and vegetable fats and oils - Determination of the content of trans fatty acid isomers of vegetable fats and oils - Gas chromatographic method (ISO 15304:2002) |
| EN ISO 15318-1999 |
纸浆、纸和纸板对7个指定的聚氯联苯(PCB)的测定 |
Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB) (ISO 15318:1999) |
| EN ISO 15330-1999 |
紧固件检查氢脆用预载荷试验平行支承面法 |
Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999) |
| EN ISO 15349-2-2003 |
非合金钢 低碳含量的测定 第2部分：感应炉内燃烧后的红外线吸收法 |
Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
| EN ISO 15364-2001 |
船舶与海上技术散货船真空/压力阀 |
Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000) |
| EN ISO 15367-1-2003 |
激光及激光设备激光束波前形状的测试方法第1部分：术语及基本外貌 |
Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects (ISO 15367 1:2003) |
| EN ISO 15465-2004 |
管道工程.带绕金属软管和软管配件 |
|
| EN ISO 15480-1999 |
六角凸缘头自钻自攻螺钉 |
Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999) |
| EN ISO 15481-1999 |
十字槽盘头自钻自攻螺钉 |
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999) |
| EN ISO 15482-1999 |
十字槽沉头自钻自攻螺钉 |
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999) |
| EN ISO 15483-1999 |
十字槽半沉头自钻自攻螺钉 |
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999) |
| EN ISO 15487-2001 |
纺织品评定家庭洗涤和干燥后衣服和其他纺织品外观的方法 |
Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying (ISO 15487:1999) |
| EN ISO 15493-2003 |
工业用塑料管道系统 丙烯腈丁二烯苯乙烯（ABS），未增塑聚氯乙烯（PVC-U）和氯化聚氯乙烯（PVC-C）米制部件 |
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specificatio |
| EN ISO 15494-2003 |
工业用塑料管道系统 聚丁烯（PB），聚乙烯（PE）和聚丙烯（PP）米制部件和系统规范 |
Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system; Metric series (ISO 15494:2003) |
| EN ISO 15496-2004 |
织物.质量控制用织物的水蒸气渗透率测量 |
|
| EN ISO 15526-1-2004 |
塑料.聚酮模塑和挤塑材料.第1部分:命名系统和基本规范 |
|
| EN ISO 15526-2-2004 |
塑料.聚酮模塑和挤塑材料.第2部分:试验样品的制备和性能测定 |
|
| EN ISO 15528-2000 |
色漆、清漆和相应的原料取样 |
Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2000) |
| EN ISO 15535-2003 |
建立人体数据库的基本要求 |
General requirements for establishing an anthropometric database (ISO 15535:2003) |
| EN ISO 15540-2001 |
船舶与造船技术软管组件耐火性试验方法 |
Ships and marine technology - Fire resistance of hose assemblies - Test methods (ISO 15540:1999) |
| EN ISO 15541-2001 |
船舶与造船技术软管组件耐火性试验台技术要求 |
Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench (ISO 15541:1999) |
| EN ISO 15546-2002 |
石油和天然气工业 铝合钻管 |
Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2002) |
| EN ISO 15547-2001 |
石油和天然气工业板式热交换器 |
Petroleum and natural gas industries - Plate heat exchangers (ISO 15547:2000) |
| EN ISO 15584-2001 |
小艇船内汽油发动机安装于发动机的燃料和电气件 |
Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001) |
| EN ISO 15586-2003 |
水质用石墨炉的原子吸收光谱法测定水中的痕量素 |
Water quality - Determination of trace elements by atomic absorption spectrometry with graphite furnace (ISO 15586:2003) |
| EN ISO 15587-1-2002 |
水质测定水中所选素用浸提法第1部分：王水浸提法 |
Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion (ISO 15587-1:2002) |
| EN ISO 15587-2-2002 |
水质测定水中所选素用的浸提法第2部分：硝酸浸提法 |
Water quality - Digestion for the determination of selected elements in water - Part 2: Nitric acid digestion (ISO 15587-2:2002) |
| EN ISO 1559-2001 |
牙科材料银合金粉 |
Dental materials - Alloys for dental amalgam (ISO 1559:1995 + Technical Corrigendum 1:1997) |
| EN ISO 15605-2004 |
胶粘剂.抽样 |
|
| EN ISO 15606-1999 |
牙科手机气动刮器和刮器梢尖 |
Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999) |
| EN ISO 15609-1-2004 |
金属材料焊接程序的规范和合格鉴定.焊接程序规范.第1部分:弧焊 |
|
| EN ISO 15609-2-2001 |
金属焊接工艺的规范和验收焊接工艺规范第2部分：气焊 |
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001) |
| EN ISO 15609-3-2004 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第3部分:电子束焊接 |
|
| EN ISO 15609-4-2004 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第4部分:激光束焊接 |
|
| EN ISO 15609-5-2004 |
金属材料焊接程序的规范和合格评定.焊接程序规范.第5部分:电阻焊接 |
|
| EN ISO 1561-1997 |
牙科铸造蜡 |
Dental casting wax (ISO 1561:1995) |
| EN ISO 15612-2004 |
金属材料焊接程序的规范和合格评定.通过采用标准焊接程序的合格评定 |
|
| EN ISO 15613-2004 |
金属材料焊接规程的规范和合格鉴定.基于生产前焊接试验的鉴定 |
|
| EN ISO 15614-1-2004 |
金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分:钢的弧焊接和气焊接以及镍和镍合金的弧焊接 |
|
| EN ISO 15614-11-2002 |
金属焊接工艺的规范和验收焊接工艺试验第11部分：电子和激光束焊 |
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
| EN ISO 15614-12-2004 |
金属材料焊接程序的规范和鉴定.焊接程序试验.第12部分:点焊、缝焊和凸焊 |
|
| EN ISO 15614-5-2004 |
金属材料焊接程序的规范和鉴定.焊接程序试验.第5部分:钛、锆及其合金的电弧焊接 |
|
| EN ISO 15614-8-2002 |
金属焊接工艺的规范和验收焊接工艺试验第8部分：管对管板接头焊接 |
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002) |
| EN ISO 15615-2002 |
气焊设备焊接、切割及相关工艺用多种乙炔发生器高压装置中的安全要求 |
Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2002) |
| EN ISO 15616-1-2003 |
标准号： |
中文标题： |
| EN ISO 15616-2-2003 |
标准号： |
中文标题： |
| EN ISO 15616-3-2003 |
标准号： |
中文标题： |
| EN ISO 15618-1-2001 |
水下焊接的焊工资格认可试验第1部分：超高压湿焊的潜水焊工 |
Qualification testing of welders for under-water welding - Part 1: Diver-welders for hyperbaric wet welding (ISO 15618-1:2001) |
| EN ISO 15618-2-2001 |
水下焊接的焊工资格认可试验第2部分：超高压干焊的潜水员焊工和焊接操作员 |
Approval testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001) |
| EN ISO 1562-1995 |
牙科铸造含金合金 |
Dental casting gold alloys (ISO 1562:1993) |
| EN ISO 1562-2004 |
牙科学.金铸造合金 |
|
| EN ISO 15620-2000 |
焊接金属材料的摩擦焊接 |
Welding - Friction welding of metallic materials (ISO 15620:2000) |
| EN ISO 15630-1-2002 |
钢筋混凝土和预应力混凝土用钢筋试验方法第1部分：钢筋、加筋钢丝、钢条 |
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2002) |
| EN ISO 15630-2-2002 |
钢筋混凝土和预应力混凝土用钢筋试验方法第2部分：焊接钢筋网 |
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2002) |
| EN ISO 15630-3-2002 |
钢筋混凝土和预应力混凝土用钢筋试验方法第3部分：预应力钢筋 |
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2002) |
| EN ISO 1564-1998 |
牙科琼脂基水胶仿印模材料 |
Dental aqueous impression materials based on agar (ISO 1564:1995) |
| EN ISO 15641-2001 |
高速切削机床用铣刀安全要求 |
Milling cutters for high speed machining - Safety requirements (ISO 15641:2001) |
| EN ISO 15667-2000 |
声学采用隔声罩和隔声小室的噪声控制指南 |
Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000) |
| EN ISO 1567-2000 |
牙科学义齿基托聚合物 |
Dentistry - Denture base polymers (ISO 1567:1999) |
| EN ISO 15681-1-2004 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第1部分:流量注入分析法 |
|
| EN ISO 15681-1-2004 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第1部分:流量注入分析法 |
|
| EN ISO 15681-2-2004 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第2部分:连续流量分析法 |
|
| EN ISO 15681-2-2004 |
水质.用流量分析法(FIA和CFA)测定正磷酸盐和总磷含量.第2部分:连续流量分析法 |
|
| EN ISO 15682-2001 |
水质用流量分析(CFA和FIA)法和光度或电势检查法测定氯化物 |
Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection (ISO 15682:2000) |
| EN ISO 15695-2001 |
釉瓷和搪瓷涂瓷漆耐划痕性的测定(包括技术勘误1) |
Vitreous and porcelain enamels - Determination of scratch resistance of enamel finishes (ISO 15695:2000, including Technical Corrigendum 1:2000) |
| EN ISO 15700-1999 |
皮革色牢度试验耐水斑点色牢度 |
Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998) |
| EN ISO 15701-1999 |
皮革色牢度试验耐聚氯乙烯色牢度 |
Leather - Tests for colour fastness - Colour fastness to migration into plasticized poly(vinyl chloride) (ISO 15701:1998) |
| EN ISO 15702-1999 |
皮革色牢度试验耐机洗色牢度 |
Leather - Tests for colour fastness - Colour fastness to machine washing (ISO 15702:1998) |
| EN ISO 15703-1999 |
皮革色牢度试验耐揉和洗涤色牢度 |
Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998) |
| EN ISO 15720-2001 |
金属涂层孔隙率试验胶材料电版术法测定金属衬底上金和钯涂层空隙度 |
Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001) |
| EN ISO 15721-2001 |
金属涂层孔隙率试验用亚硫酸和二氧化硫蒸气测定金和钯涂层孔隙率 |
Metallic coatings - Porosity tests - Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001) |
| EN ISO 15744-2002 |
手持非电动工具噪声测量规则工程法(2级) |
Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) |
| EN ISO 15748-1-2002 |
船舶和造船技术船及海上构筑物上饮用供给第1部分：规划和设计 |
Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design (ISO 15748-1:2002) |
| EN ISO 15748-2-2002 |
船舶和造船技术船及海上构筑物上饮用供给第2部分：计算方法 |
Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation (ISO 15748-2:2002) |
| EN ISO 15749-1-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第1部分:卫生排水系统设计 |
|
| EN ISO 15749-2-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第2部分:重力系统用卫生排水和排水管道 |
|
| EN ISO 15749-3-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第3部分:真空系统用卫生排水和排水管道 |
|
| EN ISO 15749-4-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第4部分:卫生排水和污物处置管 |
|
| EN ISO 15749-5-2004 |
船舶和海上技术.船舶和海上结构物的排水系统.第5部分:甲板、货舱和游泳池的排水 |
|
| EN ISO 15755-1999 |
纸和纸板杂质估算 |
Paper and board - Estimation of contraries (ISO 15755:1999) |
| EN ISO 15761-2002 |
石油及天然气工业用DN100及较小的钢闸阀 、球阀和防逆阀 |
Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002) |
| EN ISO 15774-2001 |
动植物油脂用直接石墨炉原子吸收分光光度法测定镉含量 |
Animal and vegetable fats and oils - Determination of cadmium content by direct graphite furnace atomic absorption spectrometry (ISO 15774:2000) |
| EN ISO 15783-2003 |
未密封的旋转动态泵II级规范 |
Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002) |
| EN ISO 15785-2002 |
技术制图粘接接头、折叠接头和压接头的符号表示与标示 |
Technical drawings - Symbolic presentation and indication of adhesive, folded and pressed joints (ISO 15785:2002) |
| EN ISO 15788-1-2001 |
动植物脂肪和油植物油中豆甾二烯的测定第1部分：毛细管柱气相色谱法(参考方法) |
Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 1: Method using capillary-column gas chromatography (Reference method) (ISO 15788-1:1999) |
| EN ISO 15788-2-2004 |
动植物脂肪和油.植物油中豆固醇的测定.第2部分:高效液相色谱法 |
|
| EN ISO 15791-1-2004 |
塑料.塑料产品用中等规模燃烧试验的设计和应用.第1部分:一般指南 |
|
| EN ISO 15797-2004 |
纺织材料.工作服检测用工业洗涤和整理规程 |
|
| EN ISO 15798-2001 |
眼科植入物眼科手术粘接器件 |
Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2001) |
| EN ISO 1580-1994 |
开槽盘头螺钉产品等级A级 |
Slotted pan head screws - Product grade A (ISO 1580:1994) |
| EN ISO 15831-2004 |
服饰.生理效应.用热的人体模型法测量隔热性 |
|
| EN ISO 15867-2003 |
装非危险散装货物用中型容器术语 |
Intermediate bulk containers (IBCs) for non-dangerous goods - Terminology (ISO 15867:2003) |
| EN ISO 15880-2004 |
色漆、清漆和粘合剂.水基涂料和粘合剂的MEQ值的测定 |
|
| EN ISO 15882-2003 |
保健产品的消毒化学指示剂效果的选择、使用和介绍的指南 |
Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (ISO 15882:2003) |
| EN ISO 15908-2002 |
热塑塑料管道用胶粘剂胶粘剂热稳定性的测试方法 |
Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives (ISO 15908:2002) |
| EN ISO 15913-2003 |
水质固相萃取和衍生化作用后气相色谱、质谱法测定包括苯达松和羟基苯甲腈在内的选择性苯氧烷类除草剂注 |
Water quality - Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization (ISO 15913:2000) |
| EN ISO 1597-1999 |
塑料未増塑的乙酸纤维乙酸量的测定 |
Plastics - Unplasticized cellulose acetate - Determination of acetic acid yield (ISO 1597:1994) |
| EN ISO 15973-2000 |
封闭型盘头抽芯盲铆钉AIA/St |
Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000) |
| EN ISO 15974-2000 |
封闭型沉头抽芯盲铆钉AIA/St |
Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000) |
| EN ISO 15975-2002 |
带拉断铁心和突头的封端盲铆钉AI/AIA |
Closed end blind rivets with break pull mandrel and protruding head - Al/AlA (ISO 15975:2002) |
| EN ISO 15976-2002 |
带拉断铁心和突头的封端盲铆钉St/St |
Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002) |
| EN ISO 15977-2002 |
带拉断铁心和突头的开端盲铆钉AlA/St |
Open end blind rivets with break pull mandrel and protruding head - AlA/St (ISO 15977:2002) |
| EN ISO 15978-2002 |
带拉断铁心和埋头的开端盲铆钉AlA/St |
Open end blind rivets with break pull mandrel and countersunk head - AlA/St (ISO 15978:2002) |
| EN ISO 15979-2002 |
带拉断铁心和突头的开端盲铆钉St/St |
Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002) |
| EN ISO 1598-1999 |
塑料乙酸纤维素不溶物的测定 |
Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990) |
| EN ISO 15980-2002 |
带拉断铁心和埋头的开端盲铆钉St/St |
Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002) |
| EN ISO 15981-2002 |
带拉断铁心和突头的开端盲铆钉AlA/AIA |
Open end blind rivets with break pull mandrel and protruding head - AlA/AlA (ISO 15981:2002) |
| EN ISO 15982-2002 |
带拉断铁心和埋头的开端盲铆钉AlA/AIA |
Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002) |
| EN ISO 15983-2002 |
带拉断铁心和突头的开端盲铆钉A2/A2 |
Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002) |
| EN ISO 15984-2002 |
带拉断铁心和埋头的开端盲铆钉A2/A2 |
Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002) |
| EN ISO 1599-1999 |
塑料乙酸纤维素模塑时粘度降低的测定 |
Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990) |
| EN ISO 1600-1999 |
塑料乙酸纤维素利用热的不同循环在生产模制样品中吸收量的测定 |
Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990) |
| EN ISO 16017-1-2000 |
室内、周围和工作场所空气用吸附管/热解吸/毛细管气相色谱法作挥发性有机化合物的取样及分析第1部分： |
Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000) |
| EN ISO 16017-2-2003 |
室内、周围和工作场所的空气用吸附管/热解吸/毛细管气相色谱法进行挥发性有机化合物的取样与分析第2部 |
Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling (ISO 16017-2:2003) |
| EN ISO 16021-2000 |
吸尿器材从使用者和护理人员观点对一次性成人不能控制吸尿器材的评价基本原则 |
Urine-absorbing aids - Basic principles for evaluation of single-use adult-incontinence-absorbing aids from the perspective of users and caregivers (ISO 16021:2000) |
| EN ISO 16032-2004 |
声学.建筑物服务设备的声压级测量.工程法 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com