标准号 |
中文名称 |
英文名称 |
| prEN 1222-1993 |
卫生用具 抗刮伤性的测定 |
Sanitary appliances; determination of the resistance to scratching |
| prEN 122210-1993 |
分规范：射频同轴连接器N系列 |
Sectional specification: Radio frequency coaxial connectors-series N (CECC 22210:1993) |
| prEN 122220-1993 |
分规范：射频同轴连接器MCX系列 |
Sectional specification: Radio frequency coaxial connectors-series MCX (CECC 22220:1993) |
| prEN 122230-1993 |
分规范射频同轴连接器1.0/2.3系列 |
Sectional specification; Radio frequency coaxial connectors-serie 1,0/2,3 (CECC 22230:1993) |
| prEN 122240-1993 |
分规范射频同轴连接器1.6/5.6系列 |
Sectional specification; Radio frequency coaxial connectors-serie 1,6/5,6 (CECC 22240:1993) |
| prEN 122250-1993 |
分规范：射频同轴连接器1.4/1.4系列 |
Sectional specification: Radio frequency coaxial connectors-series 1,4/1,4 (CECC 22250:1993) |
| prEN 1223-1993 |
卫生用具 抗裂纹性的测定 |
Sanitary appliances; determination of the resistance to crazing |
| prEN 122300-1994 |
分规范：射频连接器SMZ系列 |
Sectional specification: Radio frequency connectors-series SMZ |
| prEN 122310-1993 |
分规范：射频同轴连接器E系列 |
Sectional specification: Radio frequency coaxial connectors-series E |
| prEN 122320-1993 |
分规范：射频同轴连接器9.52系列 |
Sectional specification: Radio frequency coaxial connectors- series 9,52 |
| prEN 12235-1995 |
运动场表面垂直球体性能的测定 |
Surfaces for sports areas - Determination of vertical ball behaviour |
| prEN 1224-1993 |
卫生用具 抗吸水性的测定 |
Sanitary appliances; determination of water absorption |
| prEN 12247-1995 |
平板架用木材质量的测定 |
Determination of the quality of timber in pallets |
| prEN 12255-14-2003 |
废水处理厂第14部分：消毒 |
Wastewater treatment plants - Part 14: Disinfection |
| prEN 12255-15-2003 |
废水处理 厂第15部分：活性污泥曝气池中清水中氧传送的测量 |
Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in activated sludge aeration tanks |
| prEN 12255-2-1995 |
废水处理厂第2部分：生废水泵送装置的性能要求 |
Wastewater treatment plants - Part 2: Performance requirements of raw wastewater pumping installations |
| prEN 12258-2-2001 |
铝和铝合金术语和定义第2部分：化学分析 |
Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
| prEN 12259-10-1999 |
固定消防系统喷水器和喷水系统构件第10部分：多路控制器 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 10: Multiple controls |
| prEN 12259-11-2000 |
固定消防系统喷水器和喷水系统构件第11部分：中速和高速喷水器 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 11: Medium and high velocity water sprayers |
| prEN 12259-12-2000 |
固定消防系统喷水器和喷水系统构件第12部分：洒水器泵 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 12: Sprinkler pumps |
| prEN 12259-9-1999 |
固定消防系统喷水器和喷水系统构件第9部分：集水阀 |
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 9: Deluge valves |
| prEN 12266-3-1995 |
工业阀门交货技术条件第3部分：试验程序和验收标准 |
Industrial valves - Technical conditions of delivery - Part 3: Test procedures and acceptance criteria |
| prEN 12269-2-2003 |
用“压梁试验”测定钢筋与热压加气混凝土之间的粘结性能第2部分：长期试验 |
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test |
| prEN 12271-10-2002 |
地面修整规范第10部分：工厂生产控制 |
Surface dressing - Specifications - Part 10: Factory production control |
| prEN 12271-2-1999 |
地面修整规范第2部分：碎屑 |
Surface dressing - Specifications - Part 2: Chippings |
| prEN 12271-4-1999 |
地面修整规范第4部分：缺陷目测 |
Surface dressing - Specifications - Part 4: Visual assessment of defects |
| prEN 12274-7-2001 |
泥浆表面处理试验方法第7部分：测定用矿料制作泥浆混合物的适用性的摇动磨损试验 |
Slurry surfacing - Test methods - Part 7: Shaking abrasion test on suitability of mineral aggregates to slurry mixes |
| prEN 12274-8-2001 |
泥浆表面处理试验方法第8部分：目测 |
Slurry surfacing - Test methods - Part 8: Visual assessment |
| prEN 12285-2-2001 |
工厂预制金属罐第2部分：用于地下贮存易燃和不易燃水污染液的柱形单层皮和双层皮卧式罐 |
Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
| prEN 123000-1997 |
通用规范：印制电路板 |
Generic specification: Printed boards |
| prEN 123100-1998 |
分规范具有非金属化孔的单面和双面印制板 |
Sectional specification - Single and double-sided printed boards with plain holes |
| prEN 12312-10-1997 |
航空地面辅助设备特殊要求第10部分：集装箱平板架输送机 |
Aircraft ground support equipment - Specific requirements - Part 10: Container/pallet transfer transporters |
| prEN 12312-11-1997 |
航空地面辅助设备特殊要求第11部分：集装箱平台车和散货拖车 |
Aircraft ground support equipment - Specific requirements - Part 11: Container/pallet dollies and loose load trailers |
| prEN 12312-16-1999 |
航空地面辅助设备特殊要求第16部分：空气起动设备 |
Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment |
| prEN 12312-17-1999 |
航空地面辅助设备特殊要求第17部分：空调装置 |
Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment |
| prEN 12312-18-1999 |
航空地面辅助设备特殊要求第18部分：制氧/氮机 |
Aircraft ground support equipment - Specific requirements - Part 18: Oxygen/Nitrogen units |
| prEN 12312-19-1999 |
航空地面辅助设备特殊要求第19部分：飞机起重器、轴式起重器和液压尾柱 |
Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
| prEN 12312-5-1997 |
航空地面辅助设备特殊要求第5部分：飞机加油机、消防龙头配水器和加油设备 |
Aircraft ground support equipment - Specific requirements - Part 5: Aircraft refuellers, hydrant dispensers and fuelling equipment |
| prEN 12312-6-1997 |
航空地面辅助设备特殊要求第6部分：除冰机和除冰设备 |
Aircraft ground support equipment - Specific requirements - Part 6: Deicers, deicing equipment |
| prEN 12312-7-1997 |
航空地面辅助设备特殊要求第7部分：飞机移动设备 |
Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment |
| prEN 12312-8-1997 |
航空地面辅助设备特殊要求第8部分：维修梯和平台 |
Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms |
| prEN 12312-9-1998 |
航空地面辅助设备特殊要求第9部分：集装箱平板架装载机 |
Aircraft ground support equipment - Specific requirements - Part 9: Container/pallet loaders |
| prEN 123200-1998 |
分规范带有金属化孔的单面和双面印制板 |
Sectional specification - Single and double-sided printed boards with plated-through holes |
| prEN 12326-1-2003 |
不连续屋顶及覆盖层用石板和石材第1部分：产品规范 |
Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification |
| prEN 123300-1998 |
分规范多层印制板 |
Sectional specification - Multilayer printed boards |
| prEN 12331-2003 |
食品加工机械切碎机安全和卫生要求 |
Food processing machinery - Mincing machines - Safety and hygiene requirements |
| prEN 12336-1996 |
隧道机械盾构、水平推进机和内层安装设备安全要求 |
Tunneling machines - Shield machines, horizontal thrustboring machines, lining erection equipment - Safety requirements |
| prEN 12337-2-2001 |
建筑物玻璃化学加强碱石灰硅酸盐玻璃第2部分：合格评定 |
Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity |
| prEN 12354-6-2003 |
建筑声学根据构件性能评定建筑物的声学特性第6部分：封闭空间的吸声 |
Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces |
| prEN 12366-1996 |
声学手持式非电动工具噪声测试规程工程法（二级） |
Acoustics - Noise test code for hand-held non-electric power tools - Engineering method (grade 2) |
| prEN 12367-1996 |
便携式灭火器的维护 |
Maintenance for portable fire extinguishers |
| prEN 12385-10-2003 |
钢丝绳安全性 第10部分：一般建筑设备用扭绞绳 |
Steel wire ropes - Safety - Part 10: Spiral ropes for general structural appliances |
| prEN 12385-6-2003 |
钢丝绳安全性第6部分：矿井用多股绞合绳 |
Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts |
| prEN 12387-1996 |
鞋、皮革和人造革制品加工机械标准尺寸鞋修理设备安全要求 |
Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements |
| prEN 12389-1-1996 |
建筑声学根据产品性能评定建筑物的声学特性 第1部分：房间之间空气隔声 |
Building acoustics - Estimation of acoustic performance of building from the performance of products - Part 1: Airborne sound insulation between rooms |
| prEN 12390-9-2002 |
硬化混凝土试验 第9部分：抗冻融性定标 |
Testing hardened concrete - Part 9: Freeze-thaw resistance; Scaling |
| prEN 12391-1-2003 |
烟囱金属烟囱和内衬的制作 第1部分：系统烟囱 |
Chimeneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
| prEN 12391-2-1996 |
烟囱金属烟囱和内衬的制作 第2部分：重内衬砌 |
Chimneys - Execution of metal chimneys and liners - Part 2: Relining |
| prEN 12391-2000 |
烟囱金属烟囱执行标准 |
Chimneys - Metal chimneys - Execution standard |
| prEN 12391-3-1996 |
烟囱金属烟囱和内衬的制作 第3部分：专用烟囱 |
Chimneys - Execution of metal chimneys and liners - Part 3: Custom built chimneys |
| prEN 12397-1996 |
索道乘运安全要求运行 |
Safety requirements for passenger transportation by rope - Operation |
| prEN 12408-1996 |
乘运索道的安全要求质量控制 |
Safety requirements for cableways for passenger transportation by rope - Quality control |
| prEN 12411-1-1996 |
工厂环境直接探测有毒气体和蒸气及直接测量其浓度的电子设备 第1部分：一般要求和试验方法 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods |
| prEN 12411-2-1996 |
工厂环境直接探测有毒气体和蒸气及直接测量其浓度的电子设备 第2部分：用于测量极限值范围内浓度的设 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the range of limit values |
| prEN 12411-3-1996 |
工作场所的气体直接探测有毒气体和蒸气直接测量其浓度用的电气仪表 第3部分：用于测量远大于极限值的 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of polluting gases and vapours - Part 3: Performance requirements for apparatus used for measuring concentrations well above limit values |
| prEN 12411-4-1997 |
工作场所的气体工厂环境直接探测有毒气体和蒸气及直接测量其浓度的电子设备 第4部分：选择、安装、 |
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance |
| prEN 12412-1996 |
窗和门热传导经校准和保护热箱法 |
Windows and doors - Thermal transmittance - Calibrated and guarded hot box method |
| prEN 12441-7-2003 |
锌和锌合金化学分析第7部分：用原子吸收光谱/氢化物产生法测定锡 |
Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin; Flame atomic absorption spectrometric method after extraction |
| prEN 12441-8-2002 |
锌和锌合金化学分析第8部分：用电感耦合等离子原子发射光谱测定铅、铁和铝 |
Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc; Flame atomic absorption spectrometric method |
| prEN 12456-1996 |
低温容器真空绝热低温容器外套的压力保护装置 |
Cryogenic vessels - Pressure protection devices for vacuum insulated cryogenic vessels outer jackets |
| prEN 12457-1996 |
废物特性浸出粒状废料浸出符合性试验粒状废料和残渣成分浸出的测定 |
Characterization of waste - Leaching - Compliance test for leaching of granular waste materials - Determination of the leaching of constituents from granular waste materials and sludges |
| prEN 12463-1996 |
食品处理机械填充机和辅助机械安全和卫生要求 |
Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| prEN 1247-2003 |
铸造机械 铁水色浇铸设备 离心铸造机械 连续和半连续铸造机械的安全要求 |
Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
| prEN 12488-2003 |
建筑玻璃装配规定玻璃装配系统和装配要求 |
Glass in building - Glazing requirements - Assembly rules |
| prEN 12494-1996 |
建筑构件和部件面对面间耐热阻的现场测量 |
Building components and elements - In-situ measurement of the surface-to-surface thermal resistance |
| prEN 12502-1-2001 |
金属材料的防腐输水系统中的可能出现的腐蚀第1部分：总则 |
Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 1: General |
| prEN 12502-2-2001 |
金属材料的防腐输水系统中的可能出现的腐蚀第２部分：铜和铜合金影响因素的评价 |
Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 2: Review of the influencing factors for copper and copper alloys |
| prEN 12502-3-2001 |
金属材料的防腐输水系统中的可能出现的腐蚀第３部分：热浸镀锌钢铁材料影响因素的评价 |
Protection of metallic materials against corrosion - Corrosion likelihood in water - Part 3: Review of the influencing factors for hot dip galvanised ferrous materials |
| prEN 12502-4-2001 |
金属材料的防腐输水系统中的可能出现的腐蚀第４部分：不锈钢影响因素的评价 |
Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 4: Review of the influencing factors for stainless steels |
| prEN 12502-5-2001 |
金属材料的防腐输水系统中的可能出现的腐蚀第５部分：铸铁铸铁、非合金钢和低合金钢影响因素的评价 |
Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 5: Review of influencing factors for cast iron, unalloyed and low alloyed steels |
| prEN 12504-3-2003 |
结构用混凝土试验第３部分：拔拉力的测定 |
Testing concrete in structures - Part 3: Determination of pull-out force |
| prEN 12516-1-2000 |
工业阀门壳体设计强度第1部分：钢阀门壳体的列表法 |
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| prEN 12516-2-2000 |
工业阀门壳体设计强度第２部分：钢阀门壳体的计算法 |
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
| prEN 12519-2003 |
门和窗专业名词 |
Windows and pedestrian doors - Terminology |
| prEN 1253-5-2003 |
建筑物排水装置 第5部分：封闭的轻流体排水装置要求和试验方法 |
Gullies for buildings - Part 5: Gullies with light liquids closure |
| prEN 125300-1994 |
分规范：电源用磁性氧化磁芯 |
Sectional specification: magnetic oxide cores for power applications (CECC 25300:1980) |
| prEN 12560-6-2003 |
法兰和其接头指定等级的法兰垫片第６部分：钢法兰用有锯齿的金属垫片 |
Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for uses with steel flanges |
| prEN 12560-7-2001 |
法兰和其接头指定等级的法兰垫片第７部分：钢法兰用有金属套的垫片 |
Flanges and their joints - Dimensions of gaskets for Class designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
| prEN 12561-7-2003 |
铁路设备油罐车第７部分：平台和梯子 |
Railway applications - Tank wagons - Part 7: Platforms and ladders |
| prEN 12561-8-2003 |
铁路设备油罐车第８部分：供暖连接机构 |
Railway applications - Tank wagons - Part 8: Heating connections |
| prEN 12565-2000 |
加纤水泥管线的静态计算指南 |
Guidelines for static calculation of fibre-cement pipelines |
| prEN 12566-3-2001 |
５０ＰＴ以下小型废水处理系统第3部分：装配式的和／或现场安装的家庭废水处理设备 |
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
| prEN 12577-1996 |
土壤改良剂和生长培养基标记 |
Soil improvers and growing media - Labelling |
| prEN 12578-1996 |
土壤改良剂和生长培养基规范产品目录 |
Soil improvers and growing media - Specifications - Product schedules |
| prEN 12581-1996 |
涂敷设备有机液体涂料涂敷用浸渍和电泳涂敷机械安全要求 |
Coating plants - Dip and electrophoretic coating machinery for application of organic liquid coating materials - Safety requirements |
| prEN 12602-1996 |
经过热压处理的加气混凝土预制增强构件 |
Prefabricated reinforced components of autoclaved aerated concrete |
| prEN 12609-1996 |
混凝土搅拌车安全要求 |
Truck mixers - Safety requirements |
| prEN 126100-1991 |
分规范：用于能力批准的符合质量评定要求的电子设备用信号变压器 |
Sectional specification: signal transformers of assessed quality for use in electronic equipment for capability approval |
| prEN 12614-2003 |
混凝土结构防护和修理用制品和装置试验方法聚合物玻璃转变温度的测定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers |
| prEN 12618-2-2003 |
混凝土结构防护及修理用产品和装置 试验方法有或没有热循环的灌注产品的附着力测定第2部分：拉伸粘合 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling; Adhesion by tensile bond strength |
| prEN 12618-3-2003 |
混凝土结构防护及修理用产品和装置 试验方法有或没有热循环的灌注产品的附着力测定第3部分：斜剪切法 |
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling; Slant shear method |
| prEN 1262-2003 |
表面活性剂 溶解和弥散的pH值的测定 |
Surface active agents - Determination of pH value of solutions or dispersions / Note: Intended as replacement for EN 1262 (1996-07). |
| prEN 126200-1991 |
分规范：用于能力批准的符合质量评定要求的电子设备用电源变压器 |
Sectional specification: power transformers of assessed quality for use in electronic equipment for capability approval |
| prEN 12621-1996 |
涂料压力输送和或供给机械安全要求 |
Machinery for the supply and/or circulation of coating materials under pressure - Safety requirements |
| prEN 12624-1996 |
工业、商业和汽车库大门和活动门操作噪声要求和试验方法 |
Industrial, commercial and garage doors and gates - Operational noise - Requirements and test methods |
| prEN 12629-5-1998 |
制作混凝土和硅酸钙结构产品的设备安全性第５部分：制管机械 |
Machines and plants for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5: Pipe making machines |
| prEN 12629-6-1999 |
制作混凝土和硅酸钙结构产品的设备安全性第６部分：制作预制增强制品用的固定和移动设备 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
| prEN 12629-7-2003 |
制作混凝土和硅酸钙结构产品的设备安全性第７部分：在工作台上制作预应力制品的固定和移动设备 |
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for the benched manufacture of prestressed products |
| prEN 126300-1991 |
分规范：用于能力批准的符合质量评定要求的电子设备的开关模式供电设备用电源变压器 |
Sectional specification: power transformers of assessed quality for switched mode power supplies (SMPS) for use in electronic equipment for capability approval |
| prEN 12637-1-2003 |
混凝土结构防护和修理用的制品和装置试验方法灌注制品的相容性第1部分：与混凝土的相容性 |
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete |
| prEN 12637-3-2003 |
混凝土结构防护和修理用的制品和装置试验方法灌注制品的相容性第3部分：灌注产品对人造橡胶的影响 |
Products and systems for the protection and repair of concrete structures - Test methods; Compatibility of injection products - Part 3: Effect of injection products on elastomers |
| prEN 12638-1996 |
地板锯条、开槽机和铣床安全 |
Floor sawing, grooving and milling machines - Safety |
| prEN 126400-1991 |
分规范：用于能力批准的符合质量评定要求的电子设备用脉冲变压器 |
Sectional specification: pulse transformers of assessed quality for use in electronic equipment for capability approval |
| prEN 12644-3-1997 |
起重机安全检验和使用要求第3部分：使用的适合性 |
Cranes - Safety - Requirements for inspection and use - Part 3: Fitness for purpose |
| prEN 12649-1996 |
混凝土压实机械和抹平机械安全要求 |
Concrete compactors and floating machines - Safety requirements |
| prEN 12650-1-1996 |
建筑五金电动人行门第1部分：制品要求和试验方法 |
Building hardware - Powered pedestrian doors - Part 1: Product requirements and test methods |
| prEN 12650-2-1996 |
建筑五金电动人行门第２部分：电动人行门的安全 |
Building hardware - Powered pedestrian doors - Part 2: Safety at powered pedestrian doors |
| prEN 126500-1991 |
分规范：用于能力批准的符合质量评定要求的电子设备用感应器 |
Sectional specification: inductors of assessed quality for use in electronic equipment for capability approval |
| prEN 12651-1996 |
制陶机械安全细粘土砖的分选和釉料 |
Ceramic machines - Safety - Sorting and glazing of fine clay tiles |
| prEN 12652-1996 |
工业、商业和汽车库大门和活动门减少噪音要求和试验方法 |
Industrial, commercial and garage doors and gates - Sound reduction - Requirements and test methods |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com