标准号 |
中文名称 |
英文名称 |
ANSI/ISA 12.00.01-2002 |
在I级0、1或2区危险位置上用的电气设备:一般要求 |
(Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous (Classified) Locations: General Requirements ) |
ANSI/ISA 12.00.01-2005 |
在I级0和1区危险场所用的电气设备.一般要求 |
|
ANSI/ISA 12.02.01-2002 |
I级0,1,&2危险区使用的电气设备.内在防爆安全“i“ |
(Electrical Apparatus for Use in Class I, Zones 0, 1, & 2 Hazardous (Classified) Locations - Intrinsic Safety “i“ ) |
ANSI/ISA 12.10.05-2004 |
20,21和22危险区域(已划分的)中使用的电气装置.20,21和22危险区域的分类 |
|
ANSI/ISA 12.12.02-2003 |
I级2区危险场所用电气设备.“n“型防护电气设备 |
(Electrical Apparatus for Use in Class I Zone 2 Hazardous (Classified) Locations - Type of Protection “n“ ) |
ANSI/ISA 12.13.01-2000 |
性能要求,燃烧气体检测器 |
Performance Requirements, Combustible Gas Detectors |
ANSI/ISA 12.13.01-2002 |
燃烧气体检测器的性能要求 |
(Performance Requirements, Combustible Gas Detectors ) |
ANSI/ISA 12.16.01(IEC 60079-7)-2002 |
I类1型地带灾害地址设置用电子设备:增加安全性“e“的防护类型 |
(Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety “e“ ) |
ANSI/ISA 12.16.01-2002 |
I级1危险区使用的电气设备.防护类型:增安型“e“ |
(Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety “e“ ) |
ANSI/ISA 12.27.01-2002 |
电系统和易燃加工流体间加工密封要求 |
(Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids ) |
ANSI/ISA 60079-1(12.22.01)-2005 |
等级I、危险区域1(已分级)场所用电气器具:保护类型.阻燃d型 |
|
ANSI/ISA 60079-18(12.23.01)-2005 |
等级I、危险区域1(已分级)场所用电气器具:保护类型.密封m型 |
|
ANSI/ISA 61010-1(82.02.01) 2004, Annex DV US-2005 |
测量、控制和实验室用电气设备的安全要求.第1部分:一般要求 |
|
ANSI/ISA 61010-1(82.02.01) 2004, Annex DV US-2005 |
测量、控制和实验室用电气设备的安全要求.第1部分:一般要求 |
|
ANSI/ISA 61010-1(82.02.01), CSA-C 22.2, No. 1010-1, UL-61010-1-2004 |
电气和电子试验、测量、控制和相关设备:一般要求 |
|
ANSI/ISA 61010-1(82.02.01)-2004 |
电力和电子试验、测量、控制和相关设备:一般要求 |
|
ANSI/ISA 67.06.01-2002 |
在核发电厂中有关和仪器频道安全的性能监测 |
(Performance Monitoring for Nuclear Safety-Related Instrument Channels in Nuclear Power Plants ) |
ANSI/ISA 75.01.01-2002 |
尺寸控制阀用流量方程式 |
(Flow Equations for Sizing Control Valves ) |
ANSI/ISA 75.08.01-2002 |
整体式带凸缘的球型控制阀体的面对面尺寸(类型125、150、250、300和600) |
(Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) ) |
ANSI/ISA 75.08.02-2003 |
无凸缘的控制阀端面间的尺寸(级别150、300和600) |
(Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600) ) |
ANSI/ISA 75.08.05-2002 |
端头对焊球型控制阀的面对面尺寸(类型150、300、600、900、1500和2500) |
(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) ) |
ANSI/ISA 75.08.06-2002 |
带凸缘的球型控制阀体的面对面尺寸(类型900、1500和2500) |
(Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) ) |
ANSI/ISA 75.08.09-2005 |
滑动杆无凸缘控制阀的端面间尺寸(类型150、300和600) |
|
ANSI/ISA 76.00.02-2002 |
表面安装流体分配件用模块化件.第1部分:合成橡胶密封件 |
(Modular Component Interfaces for Surface-Mount Fluid Distribution Components--Part 1: Elastomeric Seals ) |
ANSI/ISA 77.20-2005 |
矿物燃料发电厂模拟器.功能要求 |
|
ANSI/ISA 77.41.01-2005 |
矿物燃料发电厂锅炉燃烧控制装置 |
|
ANSI/ISA 77.44.02-2001 |
化石燃料动力工厂蒸气温度控制系统.一体型 |
Fossil Fuel Power Plant Steam Temperature Control System - Once-Through Type |
ANSI/ISA 77.70-2005 |
矿物燃料发电厂设备管道安装 |
|
ANSI/ISA 84.00.01Part 1-2004 |
功能安全.加工工业部门的安全仪表测量系统.第1部分:框架、定义、系统、硬件和软件要求 |
|
ANSI/ISA 84.00.01Part 2-2004 |
功能安全.加工工业部门的安全仪表测量系统.第2部分:应用指南.信息 |
|
ANSI/ISA 84.00.01Part 3-2004 |
功能安全.加工工业部门的安全仪表化系统.第3部分:所要求的安全完整性等级的测定指南.信息化 |
|
ANSI/ISA 88.00.03-2003 |
按批控制.第3部分:总的生产模式和现场生产模式以及表示法 |
(Batch Control Part 3: General and Site Recipe Models and Representation ) |
ANSI/ISA 95.00.01-2000 |
企业整体控制集成.第1部分:模型和术语 |
Enterprise-Control System Integration, Part 1: Models and Terminology |
ANSI/ISA 95.00.02-2001 |
企业控制系统一体化.第2部分:对象模型属性 |
Enterprise-Control System Integration - Part 2: Object Model Attributes |
ANSI/ISA 98.00.01-2002 |
控制系统技术员的资格和认证 |
(Qualifications and Certification of Control System Technicians ) |
ANSI/ISA RP 12.15 Part II-1990 |
硫化氢检测工具的安装、操作和维修 |
Installation, Operation, and Maintenance of Hydrogen Sulfide Detection Instruments |
ANSI/ISA RP 12.6-1995 |
危险场所的布线实施规程.工具.第I部分:内部安全 |
Wiring Practices for Hazardous (Classified) Locations - Instrumentation - Part I: Intrinsic Safety |
ANSI/ISA RP12.13.02-2002 |
可燃气体检测装置的安装、运行和维护推荐实施规程 |
(Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments ) |
ANSI/ISA S 12.01.01-1999 |
危险地点电气装置的信息和定义 |
Definitions and Information Pertaining to Electrical Apparatus in Hazardous (Classified) Locations |
ANSI/ISA S 12.06.01-1995 |
危险(分级)地区的布线规程.设备.第I部分: 内在安全性 |
Wiring Practices for Hazardous (Classified) Locations - Instrumentation - Part I: Intrinsic Safety |
ANSI/ISA S 12.12-1994 |
I、II级、2区和III级、1、2区危险场所用不易燃电气设备 |
Nonincendive Electrical Equipment for Use in Class I and II, Division 2, and Class III, Divisions 1 and 2, Hazardous (Classified) Locations |
ANSI/ISA S 12.22.01-2001 |
I级1区危险地带使用的电驱动装置:防护型.防火d |
Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Flameproof d |
ANSI/ISA S 5.4-1991 |
测量环路图示 |
Instrument Loop Diagrams |
ANSI/ISA S 50.02 Part 2-1992 |
工业控制系统用字段总线标准.第2部分:物理层规范和服务定义 |
Fieldbus Standard for Use in Industrial Control Systems Part 2: Physical Layer Specification and Service Definition |
ANSI/ISA S 67.04 Part 1-1994 |
核安全相关仪器的设置点 |
Setpoints for Nuclear Safety-Related Instrumentation |
ANSI/ISA S 67.10-1994 |
核电站中使用的抽样线管道标准 |
Sample-Line Piping and Tubing Standard for Use in Nuclear Power Plants |
ANSI/ISA S 67.14-1994 |
核设施中测量和控制技术的鉴定和认证 |
Qualifications and Certification of Instrumentation and Control Technicians in Nuclear Facilities |
ANSI/ISA S 7.0.01-1996 |
测量气体的质量标准 |
Quality Standard for Instrument Air |
ANSI/ISA S 71.03-1995 |
工艺测量和控制用环境条件:机械的影响 |
Environmental Conditions for Process Measurements and Control: Mechanical Influences |
ANSI/ISA S 75.08.03-2001 |
承插焊接端头和螺旋端头球状控制阀的面到面尺寸 |
Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500) |
ANSI/ISA S 75.08.04-2001 |
对焊端头球状控制阀的面到面尺寸 |
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves |
ANSI/ISA S 75.08.07-2001 |
独立法兰球状控制阀的面到面尺寸 |
Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600) |
ANSI/ISA S 75.15-1993 |
对焊端球状控制阀的面对面尺寸(ANSI等级150、300、600、900、1500、2500) |
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500) |
ANSI/ISA S 75.19.01-2001 |
控制阀的静水试验 |
Hydrostatic Testing of Control Valves |
ANSI/ISA S 77.20-1993 |
烧矿物燃料的动力设备模拟器.功能要求 |
Fossil-Fuel Power Plant Simulators - Functional Requirements |
ANSI/ISA S 77.42.01-1999 |
化石燃料工厂回水控制系统.鼓型 |
Fossil Fuel Plant Feedwater Control System - Drum Type |
ANSI/ISA S 77.44-1994 |
烧矿物燃料设备蒸气温度控制系统.筒式 |
Fossil Fuel Plant Steam Temperature Control System - Drum Type |
ANSI/ISA S 77.70-1994 |
烧矿物燃料动力设备管道安装 |
Fossil Fuel Power Plant Instrument Piping Installation |
ANSI/ISA S 82.02.02-1996 |
测量、控制和实验室用电力设备的安全要求 |
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use |
ANSI/ISA S 82.02.04-1996 |
测量、控制和实验室用电力设备的安全要求.第2-032部分:电测量和试验用手持电流线夹的特殊要求 |
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held Current Clamps for Electrical Measurement and Test |
ANSI/ISA S 84.01-1996 |
加工工业的安全仪器化系统的应用 |
Application of Safety Instrumented Systems for the Process Industries |
ANSI/ISA S 92.02.01 Part 1-1998 |
氧化氯探测仪的性能要求(50-1000ppm全尺寸) |
Performance Requirements for Chlorine Monoxide Detection Instruments (50-1000 ppm Full Scale) |
ANSI/ISA S 92.04.01 Part I-1996 |
探测缺氧或含氧丰富的空气用仪器的性能要求 |
Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Enriched Atmospheres |
JIS A0001-1999 |
基本模数 |
(Basic module) |
JIS A0002-1999 |
建筑模数术语 |
(Glossary of terms used in building module) |
JIS A0003-1999 |
建筑构件的公差 |
(Tolerances for building) |
JIS A0004-1999 |
建筑模数的配合原则 |
(Principle of modular coordination in buildings) |
JIS A0005-1966 |
建筑物开口部构件标准公称尺寸 |
(Standard nominal size of opening components for buildings) |
JIS A0006-1966 |
建筑用板的标准尺寸 |
(Standard size of boards for buildings) |
JIS A0007-1967 |
建筑用铁制框架墙壁构件的标准公称尺寸 |
(Standard nominal size of steel framed wall component for buildings) |
JIS A0008-1967 |
建筑用铁制框架屋顶构件的标准公称尺寸 |
(Standard nominal size of steel framed roof component for buildings) |
JIS A0009-1970 |
建筑物活动隔墙构件的公称尺寸 |
(Nominal dimension of movable partition components for buildings) |
JIS A0012-1980 |
住宅卫生设备的模数组合尺寸 |
(Modular co-ordination -- Sizes of sanitary unit for dwellings) |
JIS A0013-1980 |
住宅壁式厨房设备的模数组合尺寸 |
(Modular co-ordination -- Sizes of wall type kitchen unit for dwellings) |
JIS A0014-1976 |
住宅空调设备的模数组合尺寸 |
(Modular co-ordinating sizes of air-conditioning unit for dwellings) |
JIS A0015-1976 |
住宅管道系统的模数组合尺寸 |
(Modular co-ordinating sizes of piping unit for dwellings) |
JIS A0016-1979 |
贮藏组合间墙内容纳机器空间的模数协调尺寸 |
(Modular coordination-coordinating size of opening for built-in appliances in storage furniture) |
JIS A0017-1998 |
厨房设备.组合尺寸 |
(Kitchen equipment -- Coordinating sizes) |
JIS A0018-1992 |
住宅配套设备单的模数协调尺寸 |
(Modular co-ordination of equipment unit for dwellings) |
JIS A0030-1994 |
建筑构件性能的分类 |
(Classification of performance for building elements) |
JIS A0101 ERRATUM 1-2003 |
勘误 |
(ERRATUM) |
JIS A0101-2003 |
土木工程制图通则 |
(General rules for civil engineering drawings) |
JIS A0150-1999 |
建筑制图通则 |
(Drawing office practice for architecture and building (General rules)) |
JIS A0151-1961 |
门、窗符号 |
(Symbols for windows and doors) |
JIS A0201-1971 |
建筑用室内外装饰材料术语 |
(Glossary of terms used in finishing building materials for interior and exterior uses) |
JIS A0202-2000 |
隔热.词汇 |
(Thermal insulation -- Vocabulary) |
JIS A0203-1999 |
混凝土术语 |
(Concrete terminology) |
JIS A0204 ERRATUM 1-2002 |
地质地图.图例的符号、颜色、图形、术语和表示(勘误1) |
(Geological map -- Symbols, colors, patterns, terms, and presentation of legend (Erratum 1)) |
JIS A0204-2002 |
地质图.符号、颜色、图形、术语和图例的表示 |
(Geological map -- Symbols, colors, patterns, terms, and presentation of legend) |
JIS A1101-1998 |
混凝土塌落度的试验方法 |
(Method of test for slump of concrete) |
JIS A1102-1999 |
集料的筛分试验方法 |
(Method of test for sieve analysis of aggregates) |
JIS A1103 ERRATUM 1-2003 |
JIS A1103的技术勘误1 |
(ERRATUM) |
JIS A1103-2003 |
测定集料通过75mum试验筛的量的试验方法 |
(Method of test for amount of material passing test sieve 75 mum in aggregates) |
JIS A1104 ERRATUM 1-2000 |
集料的单容重和集料实积率的测定方法(勘误1) |
(Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)) |
JIS A1104-1999 |
集料的单容重和集料实积率的测定方法 |
(Methods of test for bulk density of aggregates and solid content in aggregates) |
JIS A1104-1999/ERRATUM 1-2000 |
集料的体积密度和集料中固体含量的试验方法(勘误1) |
(Methods of test for bulk density of aggregates and solid content in aggregates (Erratum 1)) |
JIS A1105-2001 |
细集料中有机杂质的试验方法 |
(Method of test for organic impurities in fine aggregate) |
JIS A1106-1999 |
混凝土弯曲强度的试验方法 |
(Method of test for flexural strength of concrete) |
JIS A1107-1993 |
混凝土钻芯样和截梁试样的采取及其试验方法 |
(METHOD OF OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE) |
JIS A1107-2002 |
混凝土钻芯压缩强度的抽样及试验方法 |
(Method of sampling and testing for compressive strength of drilled cores of concrete) |
JIS A1108-1999 |
混凝土抗压强度的试验方法 |
(Method of test for compressive strength of concrete) |
JIS A1109-1999 |
细集料的比重及吸水率的试验方法 |
(Methods of test for density and water absorption of fine aggregates) |
JIS A1110-1999 |
粗集料的比重及吸水率试验方法 |
(Methods of test for density and water absorption of coarse aggregates) |
JIS A1111-2001 |
细集料表面湿度的试验方法 |
(Method of test for surface moisture in fine aggregate) |
JIS A1112 ERRATUM 1-2003 |
JIS A1112的技术勘误1 |
(ERRATUM) |
JIS A1112-2003 |
新浇混凝土的冲洗分析试验方法 |
(Method of test for washing analysis of fresh concrete) |
JIS A1113-1999 |
混凝土抗张强度的试验方法 |
(Method of test for splitting tensile strength of concrete) |
JIS A1114-2002 |
混凝土棱柱形截块强度的抽样和试验方法 |
(Method of sampling and testing for strength of sawed prism of concrete) |
JIS A1115-1998 |
新浇混凝土的取样方法 |
(Method of sampling fresh concrete) |
JIS A1116-1998 |
新浇混凝土的容重和空气含量的试验方法 |
(Method of test for unit mass and air content mass type of fresh concrete) |
JIS A1118-1997 |
容积法测量新浇混凝土中空气含量的试验方法 |
(Method of test for air content of fresh concrete byvolumetric method) |
JIS A1119-1998 |
新搅拌混凝土中成分变化率的试验方法 |
(Method of test for variability of constituents in freshly mixed concrete) |
JIS A1120-1976 |
用德威尔试验机作粗集料的磨损试验方法 |
(Method of test for abrasion of coarse aggregate by use of the deval machine) |
JIS A1121-2001 |
用洛杉矶试验机测定粗集料耐磨性的试验方法 |
(Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine) |
JIS A1122 ERRATUM 1-2005 |
勘误 |
|
JIS A1122-1998 |
使用硫酸钠的集料稳定性试验方法 |
(Method of test for soundness of aggregates by use of sodium sulfate) |
JIS A1123 ERRATUM 1-2004 |
勘误 |
|
JIS A1123-2003 |
混凝土泌水的试验方法 |
(Method of test for bleeding of concrete) |
JIS A1125-2001 |
干燥法测定集料的含水总量及表面湿度的试验方法 |
(Methods of test for total moisture content of aggregate and surface moisture in aggregate by drying) |
JIS A1126 ERRATUM 1-2001 |
用划痕试验进行粗集料中软质颗粒含量的试验方法(勘误1) |
(Method of test for content of soft particles in coarse aggregate by scratching (Erratum 1)) |