标准号 |
中文名称 |
英文名称 |
| DIN CEN/TS 14793-2005 |
固定源辐射.交替法与参照法比较的实验室内验证过程 |
|
| DIN CEN/TS 14796-2004 |
医疗信息学.数据类型 |
|
| DIN CEN/TS 14807-2005 |
塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP).地下GRP-UP管道的结构分析指南 |
|
| DIN CEN/TS 14821-1-2005 |
交通和旅游信息(TTI).通过蜂窝式网络的TTI文电.第1部分:总规范 |
|
| DIN CEN/TS 14821-2-2005 |
交通和旅游信息(TTI).通过蜂窝式网络的TTI文电.第2部分:标准号和ADP文电标题 |
|
| DIN CEN/TS 14821-3-2005 |
交通和旅游信息(TTI).通过蜂窝式网络的TTI文电.第3部分:基础信息素 |
|
| DIN CEN/TS 14821-4-2005 |
交通和旅游信息(TTI).通过蜂窝式网络的TTI文电.第4部分:自主服务协议 |
|
| DIN CEN/TS 14821-5-2005 |
交通和旅游信息(TTI).通过蜂窝式网络的TTI文电.第5部分:内部服务 |
|
| DIN CEN/TS 14821-6-2005 |
交通和旅游信息(TTI).通过蜂窝式网络的TTI文电.第6部分:外部服务 |
|
| DIN CEN/TS 14821-7-2005 |
交通和旅游信息(TTI).通过蜂窝式网络的TTI文电.第7部分:机载定位的性能要求 |
|
| DIN CEN/TS 14821-8-2005 |
交通和旅游信息(TTI).通过蜂窝式网络的TTI文电.第8部分:GSM特定参数 |
|
| DIN CEN/TS 14825-2004 |
空间加热和制冷用带电力驱动压缩机的空调、液体制冷包和热泵.部分负载条件下的试验和分级 |
|
| DIN CEN/TS 14826-2004 |
邮政服务.邮件的自动识别.机读数字邮政标记的二维条形码符号打印质量规范 |
|
| DIN CEN/TS 14906-2005 |
皮革.装饰性皮革特性.汽车皮革的选择指南 |
|
| DIN CEN/TS 14961-2005 |
固体生物燃料.燃料规范和等级 |
|
| DIN CEN/TS 14993-2005 |
联合运输用可换货箱.可叠放可换货箱类型 A 1371.尺寸、设计要求和试验 |
|
| DIN CEN/TS 15003-2005 |
木材和木基制品的耐久性.防毁木生物治疗用热空气工艺标准 |
|
| DIN CEN/TS 15053-2005 |
无损检验.检验用间断式试样的建议 |
|
| DIN CEN/TS 15082-2005 |
木材防腐剂.新锯材边材对变色菌和霉菌的防腐有效性的测定.现场试验 |
|
| DIN CEN/TS 15083-1-2005 |
木材和木基产品的耐久性.实心木材抗木材损坏菌的天然耐久性的测定.试验方法.第1部分:担子菌 |
|
| DIN CEN/TS 15083-2-2005 |
木材和木基产品的耐久性.实心木材抗木材损坏菌的天然耐久性的测定.试验方法.第2部分:软腐蚀微生物菌 |
|
| DIN CEN/TS 15103-2005 |
固体生物燃料.体密度的测定方法 |
|
| DIN CEN/TS 15104-2005 |
固体生物燃料.碳、氢和氮总含量的测定.仪器方法 |
|
| DIN CEN/TS 15105-2005 |
固体生物燃料.氯化物、钠、钾含水量的测定方法 |
|
| DIN CEN/TS 15122-2005 |
体育场表面.合成体育场表面层耐反复冲击性的测定 |
|
| DIN CEN/TS 15127-1-2005 |
健康信息学.心理测量软件的检测.第1部分:总则 |
|
| DIN CEN/TS 15150-2005 |
固体生物燃料.粒子密度的测定方法 |
|
| DIN CEN/TS 15256-2005 |
防护服装.冰球运动用手、手臂、腿、生殖器和颈部防护设备.除守门员外的运动员用防护设备.要求和试验方法 |
|
| DIN CEN/TS 1555-7-2003 |
气态燃料输送用塑料管道系统.聚乙烯(PE).第7部分:符合性评定指南 |
(Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 1555-7:2003) |
| DIN CEN/TS 1793-4-2004 |
道路交通噪声降低装置.声学性能测定的试验方法.第4部分:固有特征.声音衍射的现场测定值 |
|
| DIN CEN/TS 1793-5-2003 |
道路交通减噪装置.声音性能测定的试验方法.第5部分:内在特性.声音反射和隔空气传播声的现场测定值 |
(Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics; In situ values of sound reflection and airborne sound insulation; German version CEN/TS 1793-5:2003) |
| DIN CEN/TS 1852-3-2003 |
无压力地下排水和排污塑料管道系统.聚丙烯(PP).第3部分:安装指南 |
(Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 3: Guidance for installation; German version CEN/TS 1852-3:2003) |
| DIN CEN/TS 1923-2004 |
信息技术.欧洲字符集及其编码.8位单字节编码 |
(Information technology - European character repertoires and their coding - 8 bit single byte coding; German version CEN/TS 1923:2003) |
| DIN CEN/TS 1923-2004 |
信息技术.欧洲字符集及其编码.8位单字节编码 |
|
| DIN CEN/TS 764-6-2004 |
压力设备.第6部分:操作说明的结构和内容 |
|
| DIN CEN/TS 81-29-2005 |
升降机的建造和安装的安全规则.客货用升降机.第29部分:与EN 81-20到EN 81-28相关的说明(包括EN 81-1-1998和EN 81-2-1998) |
|
| DIN CEN/TS 820-5-2004 |
高级工业陶瓷.块体陶瓷试验方法.热机性能.第5部分:高温下弹性模量的测定 |
|
| DIN CEN/TS 843-6-2004 |
高级工业陶瓷.块体陶瓷.室温下机械性能.第6部分:断裂面显微镜图像观察指南 |
|
| DIN EN 1-1998 |
有汽化式锅炉的燃油炉 |
(Fluid oil stoves with vaporizing burners; German version EN 1:1998) |
| DIN EN 10001-1991 |
生铁的定义和分类 |
(Definition and classification of pig-iron; german version EN 10001:1990) |
| DIN EN 100012-1995 |
基本规范:电子件的X线透视法 |
(Basic specification: X-ray inspection of electronic components; German version EN 100012:1995) |
| DIN EN 100014-1996 |
基本规范.CECC已经审估过的平均工艺规程.极限60%置信度 |
(Basic specification: CECC assessed process average procedure - 60% confidence limit; German version EN 100014:1991) |
| DIN EN 10002-1-2001 |
金属材料.拉力试验.第1部分:室温下的试验方法 |
(Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature; German version EN 10002-1:2001) |
| DIN EN 10002-5-1992 |
金属材料.抗拉试验.第5部分:高温检验法 |
(Tensile testing of metallic materials; method of testing at elevated temperature; german version EN 10002-5:1991) |
| DIN EN 1001-1-2005 |
木材和木基产品的耐久性.术语.第1部分:等效术语表 |
|
| DIN EN 1001-2-2005 |
木材和木基产品的耐久性.术语.第2部分:词汇 |
|
| DIN EN 100114-1-1996 |
程序规则.质量认证程序.第1部分:认可生产厂家用CECC要求 |
(Rule of procedure - Quality assessment procedure - Part 1: CECC requirements for the approval of an organization; German version EN 100114-1:1996) |
| DIN EN 100114-6-1997 |
程序规则.质量评定程序.第6部分:对电子件生产厂家的技术认可 |
(Rule of procedure - Quality assessment procedures - Part 6: Technology approval of electronic component manufacturers; German version EN 100114-6:1996) |
| DIN EN 100114-6/A1-1999 |
电子件的CECCECC电子件的质量量评定方法.第6部分:生产厂家的技术认证.修改A1 |
(CECC-Quality assessment procedures for electronic components - Part 6: Technology approval of electronic component manufacturers; Amendment A1; German version EN 100114-6/A1:1999) |
| DIN EN 10016-1-1995 |
拉拔和/或冷轧用非合金钢棒.第1部分:一般要求 |
(Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements; German version EN 10016-1:1994) |
| DIN EN 10016-2-1995 |
拉拔和/或冷轧用非合金钢棒.第2部分:通用钢棒的特殊要求 |
(Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purpose rod; German version EN 10016-2:1994) |
| DIN EN 10016-3-1995 |
拉拔和/或冷轧用非合金钢棒.第3部分:沸腾和沸腾代用低碳钢的特殊要求 |
(Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod; German version EN 10016-3:1994) |
| DIN EN 10016-4-1995 |
拉拔和/或冷轧用非合金钢棒.第4部分:特殊用途钢棒的特殊要求 |
(Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications; German version EN 10016-4:1994) |
| DIN EN 10017-2005 |
拉制和/或冷轧钢棒.尺寸和公差 |
|
| DIN EN 10020-2000 |
钢的等级定义和划分 |
(Definition and classification of grades of steel; German version EN 10020:2000) |
| DIN EN 10021-1993 |
钢和钢制品的一般交货技术条件 |
(General technical delivery requirements for steel and iron products; German version EN 10021:1993) |
| DIN EN 10024-1995 |
带倾斜的内法兰面的工字钢.极限尺寸和外型尺寸 |
(Hot-rolled taper flange I sections - Tolerances on shape and dimensions; German version EN 10024:1995) |
| DIN EN 10025-1-2005 |
结构钢制热轧产品.第1部分:一般交货技术条件 |
|
| DIN EN 10025-1994 |
非合金结构钢制热轧产品.交货技术条件 |
(Hot rolled products of non-alloy structural steels; technical delivery conditions (includes amendment A1:1993); german Version EN 10025:1990) |
| DIN EN 10025-2-2005 |
结构钢制热轧产品.第2部分:非合金结构钢交货技术条件 |
|
| DIN EN 10025-3-2005 |
结构钢制热轧产品.第3部分:正火/正火轧制可焊细粒结构钢交货技术条件 |
|
| DIN EN 10025-4-2005 |
结构钢制热轧产品.第4部分:热机械轧制可焊细粒结构钢交货技术条件 |
|
| DIN EN 10025-5-2005 |
结构钢制热轧产品.第5部分:改良的耐大气腐蚀的结构钢交货技术条件 |
|
| DIN EN 10025-6-2005 |
结构钢制热轧产品.第6部分:在淬火和回火条件下高屈服强度结构钢扁平轧材的交货技术条件 |
|
| DIN EN 10027-1-1992 |
钢的命名系统.第1部分:简称.主要符号 |
(Designation systems for steels; steel names and principal symbols; german version EN 10027-1:1992) |
| DIN EN 10027-1-2005 |
钢的命名系统.第1部分:钢名称 |
|
| DIN EN 10027-2-1992 |
钢的命名系统.第2部分:号码系统 |
(Designation systems for steel; numerical system; german version of EN 10027-2:1992) |
| DIN EN 10028-1-2000 |
压力容器钢板.第1部分:一般要求 |
(Flat products made of steel for pressure purposes - Part 1: General requirements; German version EN 10028-1:2000) |
| DIN EN 10028-2-1993 |
压力容器钢板.第2部分:非合金和合金耐热钢 |
(Flat products made from steel for pressure purposes; part 2: non-alloy and alloy steels with specified elevated temperature properties; german version EN 10028-2:1992) |
| DIN EN 10028-3-1993 |
压力容器钢板.第3部分:适于焊接的一般退火细颗粒结构钢 |
(Flat products made from steel for pressure purposes; part 3: weldable fine grain steels, normalized; german version EN 10028-3:1992) |
| DIN EN 10028-4-1994 |
压力容器钢板.第4部分:镍合金冷韧钢 |
(Flat products made of steels for pressure purposes - Part 4: Nickel alloyed steels with specified low temperature properties; German version EN 10028-4:1994) |
| DIN EN 10028-5-1997 |
压力容器钢板.第5部分:热机械轧制适于焊接的细晶粒结构钢 |
(Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; German version EN 10028-5:1996) |
| DIN EN 10028-6-1997 |
压力容器钢板.第6部分:调质适于焊接的细晶粒结构钢 |
(Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered; German version EN 10028-6:1996) |
| DIN EN 10028-7-2000 |
压力容器钢板.第7部分:不锈钢 |
(Flat products made of steels for pressure purposes - Part 7: Stainless steels; German version EN 10028-7:2000) |
| DIN EN 10029-1991 |
极限偏差3mm的热轨钢板.形状公差.允许重量偏差 |
(Hot rolled steel plates 3 mm thick or above; tolerances on dimensions, shape and mass; german version EN 10029:1991) |
| DIN EN 10031-2003 |
锻造用半成品.尺寸、形状和质量公差 |
(Semi-finished products for forging - Tolerances on dimensions, shape and mass; German version EN 10031:2003) |
| DIN EN 10034-1994 |
I型和H型结构钢.极限偏差和外型公差 |
(Structural steel I and H sections; tolerances on shape and dimensions; German version EN 10034:1993) |
| DIN EN 10036-1990 |
钢铁材料的化学分析.钢和生铁中总含碳量的测定.在氧气流中燃烧后重量分析测定 |
(Chemical analysis of ferrous materials; determination of total carbon in steel and iron; gravimetric method after combustion in a stream of oxygen; german version EN 10036:1989) |
| DIN EN 10045-1-1991 |
金属材料.摆锤式缺口冲击韧性试验.第1部分:试验方法 |
(Charpy impact test on metallic materials; test method; german version EN 10045-1:1990) |
| DIN EN 10045-2-1993 |
金属材料.摆式冲击试验.第2部分:试验机的验证(摆式冲击试验机) |
(Metallic materials; Charpy impact test; part 2: verification of the testing machine (pendulum impact); german version EN 10045-2:1992) |
| DIN EN 10048-1996 |
热轧窄钢带.尺寸和形状公差 |
(Hot-rolled narrow steel strip - Tolerances on dimensions and shape; German version EN 10048:1996) |
| DIN EN 1005-1-2002 |
机械安全.人体的物理特性.第1部分:术语和定义 |
(Safety of machinery - Human physical performance - Part 1: Terms and definitions; German version EN 1005-1:2001) |
| DIN EN 1005-2-2003 |
机械安全.人体特性.第2部分:机械及其零部件的人工装卸 |
(Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery; German version EN 1005-2:2003) |
| DIN EN 1005-3-2002 |
机械安全.人体的物理特性.第3部分:为机械操作推荐的负荷极限 |
(Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation; German version EN 1005-3:2002) |
| DIN EN 10051-1997 |
无涂层连续热轧非合金和合金钢板材,薄板材和带材.尺寸和形状公差 |
(Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances of dimensions and shape (includes Amendment A1:1997); German version EN 10051:1991 + A1:1997) |
| DIN EN 10052-1994 |
钢铁产品热处理术语 |
(Vocabulary of heat treatment terms for ferrous products; German version EN 10052:1993) |
| DIN EN 10055-1995 |
带圆角的热轧等腰T型钢和过渡连接件.尺寸.极限尺寸和形状公差 |
(Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions; German version EN 10055:1995) |
| DIN EN 10056-2-1994 |
等边和不等边角钢.第2部分:极限偏差和外形公差 |
(Structural steel equal and unequal leg angles; part 2: tolerances on shape and dimensions; German version EN 10056-2:1993) |
| DIN EN 10058-2004 |
一般用途热轧扁钢棒.尺寸及形状和尺寸公差 |
|
| DIN EN 10059-2004 |
一般用途热轧方形钢棒.尺寸及形状和尺寸公差 |
|
| DIN EN 10060-2004 |
一般用途热轧圆钢棒.尺寸及形状和尺寸公差 |
|
| DIN EN 10061-2004 |
一般用途热轧六角钢棒.尺寸及形状和尺寸公差 |
|
| DIN EN 10067-1996 |
热轧球扁钢.尺寸和形状、尺寸、质量公差 |
(Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass; German version EN 10067:1996) |
| DIN EN 1007-1-2002 |
高级工业陶瓷.陶瓷复合材料.纤维增强的试验方法.第1部分:胶料含量的测定 |
(Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 1: Determination of size content; German version EN 1007-1:2002) |
| DIN EN 1007-2-2002 |
高级工业陶瓷.陶瓷复合材料.纤维增强的试验方法.第2部分:线密度的测定 |
(Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 2: Determination of linear density; German version EN 1007-2:2002) |
| DIN EN 1007-3-2002 |
高级工业陶瓷.陶瓷复合材料.纤维增强的试验方法.第3部分:长纤维直径和横截面积的测定 |
(Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area; German version EN 1007-3:2002) |
| DIN EN 1007-4-2004 |
高级工业陶瓷.陶瓷复合材料.纤维增强的试验方法.第4部分:环境温度下长纤维的抗拉性能测定 |
|
| DIN EN 10071-1990 |
钢铁材料的化学分析.钢和铁中锰含量的测定.电测滴定法 |
(Chemical analysis of ferrous materials; determination of manganese in steel and iron; electrometric titration method; german version EN 10071:1989) |
| DIN EN 10079-1993 |
钢制品定义的确定 |
(Definition of steel products; german version EN 10079:1992) |
| DIN EN 1008-2002 |
搅拌混凝土用水.在搅拌混凝土用水时抽样检验和评定水(包括混凝土工业加工过程中回收的水)的适用性 |
(Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete; German version EN 1008:2002) |
| DIN EN 10083-1-1996 |
淬火和回火钢.第1部分:特殊钢交货技术条件 |
(Quenched and tempered steels - Part 1: Technical delivery conditions for special steels (includes Amendment A1:1996); German version EN 10083-1:1991 + A1:1996) |
| DIN EN 10083-2-1996 |
淬火和回火钢.第2部分:非合金优质钢交货技术条件 |
(Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels (includes Amendment A1:1996); German version EN 10083-2:1991 + A1:1996) |
| DIN EN 10083-3-1996 |
优质钢.第3部分:硼钢交货技术条件 |
(Quenched and tempered steels - Part 3: Technical delivery conditions for boron steels; German version EN 10083-3:1995) |
| DIN EN 10084-1998 |
渗碳钢.技术交货条件 |
(Case hardening steels - Technical delivery conditions; German version EN 10084:1998) |
| DIN EN 10085-2001 |
氮化钢.交货技术条件 |
(Nitriding steels - Technical delivery conditions; German version EN 10085:2001) |
| DIN EN 10087-1999 |
高速切削钢.半成品热轧制棒材和线材的技术交货条件 |
(Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods; German version EN 10087:1998) |
| DIN EN 10088-1-1995 |
不锈钢.第1部分:不锈钢目录 |
(Stainless steels - Part 1: List of stainless steels; German version EN 10088-1-1995) |
| DIN EN 10088-1-2005 |
不锈钢.第1部分:不锈钢目录 |
|
| DIN EN 10088-2-1995 |
不锈钢.第2部分:一般用途的薄板和带材的交货技术条件 |
(Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes; German version EN 10088-2-1995) |
| DIN EN 10088-2-2005 |
不锈钢.第2部分:一般用途耐腐蚀钢薄板/板材和带材的交货技术条件 |
|
| DIN EN 10088-3-1995 |
不锈钢.第3部分:一般用途的半成品,钢棒,轧制线材和型钢的交货技术条件 |
(Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes; German version EN 10088-3-1995) |
| DIN EN 10088-3-2005 |
不锈钢.第3部分:一般用途耐腐蚀钢半成品、棒材、杆材、线材、型材和光亮产品的交货技术条件 |
|
| DIN EN 10089-2003 |
淬火和回火弹簧用热轧钢.交货技术条件 |
(Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002) |
| DIN EN 10090-1998 |
内燃机阀门用钢及合金 |
(Valve steels and alloys for internal combustion engines; German version EN 10090:1998) |
| DIN EN 10092-1-2004 |
热轧弹簧扁钢棒材.第1部分:扁平棒材.尺寸及形状和尺寸公差 |
(Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions; German version EN 10092-1:2003) |
| DIN EN 10092-1-2004 |
热轧弹簧扁钢棒材.第1部分:扁平棒材.尺寸及形状和尺寸公差 |
|
| DIN EN 10092-2-2004 |
热轧弹簧钢扁平棒材.第2部分:有肋和有槽的簧片.尺寸及形状和尺寸公差 |
|
| DIN EN 10095-1999 |
耐高温钢和镍合金 |
(Heat resisting steels and nickel alloys; German version EN 10095:1999) |
| DIN EN 101-1992 |
瓷砖和板.按莫斯测定法测定表面划痕硬度 |
(Ceramic tiles; determination of scratch hardness of surface according to Mohs; german version EN 101:1991) |
| DIN EN 1010-3-2002 |
机械安全.印刷和纸加工机械的设计和施工的安全要求.第3部分:切削机 |
(Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines; German version EN 1010-3:2002) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com