标准号 |
中文名称 |
英文名称 |
| EN ISO 19954-2003 |
鞋整鞋的试验方法在家用洗衣机中的可洗性 |
Footwear - Test methods for whole shoe - Washability in a domestic washing machine (ISO 19954:2003) |
| EN ISO 19956-2004 |
鞋靴.鞋跟的试验方法.耐疲劳性 |
|
| EN ISO 19957-2004 |
鞋靴.鞋跟的试验方法.鞋跟钉的保持力 |
|
| EN ISO 19958-2004 |
鞋靴.鞋跟和顶部的试验方法.顶部保持力 |
|
| EN ISO 2009-1994 |
开槽沉头螺钉(通用头型)产品等级A |
Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994) |
| EN ISO 2010-1994 |
开槽半沉头螺钉(通用头型)产品等级A |
Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994) |
| EN ISO 20344-2004 |
个人防护设备.鞋靴的试验方法 |
|
| EN ISO 20345-2004 |
个人防护设备.安全鞋靴 |
|
| EN ISO 20346-2004 |
个人防护设备.防护鞋 |
|
| EN ISO 20347-2004 |
个人防护设备.专业鞋 |
|
| EN ISO 2039-1-2003 |
塑料硬度测定第1部分：压球法 |
Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001) |
| EN ISO 2039-2-1999 |
塑料硬度测定第2部分：洛氏硬度 |
Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987) |
| EN ISO 20482-2003 |
金属材料板材及带材伊利森(Erichsen)压杯试验 |
Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2003) |
| EN ISO 2060-1995 |
纺织品卷装纱用绞纱法测定线密度(单位长度的质量) |
Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method (ISO 2060:1994) |
| EN ISO 2061-1995 |
纺织品纱线捻度的测定直接计数法 |
Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:1995) |
| EN ISO 2062-1995 |
纺织品从包装抽取纱线单端断裂力和断裂伸长的测定 |
Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break (ISO 2062:1993) |
| EN ISO 2064-2000 |
金属和其他无机覆盖层厚度测量的定义和一般要求 |
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| EN ISO 20645-2004 |
纺织织物.抗菌活性的测定.琼脂扩散木片试验 |
|
| EN ISO 20763-2004 |
石油和相关产品.液压液耐磨性能的测定.叶片泵法 |
|
| EN ISO 20823-2003 |
石油和石油产品 与热表面接触时流体的易燃特性的测定 多种形式的点燃试验 |
Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surface (ISO 20823-2003) |
| EN ISO 20843-2003 |
石油及石油产品HFA(六氟丙酮)HFAS和HFC流体中阻燃液PH值的测定 |
Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2003) |
| EN ISO 20844-2004 |
石油及其相关产品.利用柴油喷射器嘴测定含聚合物油的剪切稳定性 |
|
| EN ISO 20846-2004 |
石油产品.机动车燃料中硫含量的测定.紫外线荧光法 |
|
| EN ISO 20847-2004 |
石油产品.机动车燃料中硫含量的测定.能量分散X射线荧光光谱法 |
|
| EN ISO 20884-2004 |
石油产品.机动车燃料中硫含量的测定.波长分散X射线荧光光谱法 |
|
| EN ISO 21049-2004 |
泵.离心和旋转泵用轴密封系统 |
|
| EN ISO 2114-2000 |
塑料（聚酯树脂）、色漆和清漆（胶粘合剂）部分酸值和总酸值的测定 |
Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000) |
| EN ISO 21227-1-2003 |
油漆和清漆用光学成像法评价涂漆表面的缺陷第1部分：一般指南 |
Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003) |
| EN ISO 21269-2004 |
带米制精细齿距螺纹的六角凹头螺钉 |
|
| EN ISO 21329-2004 |
石油和天然气工业.管道运输系统.机械连接器的试验过程 |
|
| EN ISO 2151-2004 |
声学.压缩机和真空泵用噪音试验规程.工程法(2级) |
|
| EN ISO 21530-2004 |
牙科学.牙科器械表面用材料.耐化学消毒剂的测定 |
|
| EN ISO 21533-2003 |
牙科学可反复使用的牙韧带注射 器 |
Dentistry - Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003) |
| EN ISO 21549-1-2004 |
医疗信息学.病人健康卡数据.第1部分:通用结构 |
|
| EN ISO 21549-2-2004 |
医疗信息学.病人健康卡数据.第2部分:通用对象 |
|
| EN ISO 21549-3-2004 |
医疗信息学.病人健康卡数据.第3部分:受限的临床数据 |
|
| EN ISO 21567-2004 |
食品和动物饲料的微生物学.志贺氏杆菌检测的水平法 |
|
| EN ISO 2157-1995 |
牙科旋转器械公称直径和命名代码 |
Dental rotary instruments - Nominal diameters and designation code number (ISO 2157:1992) |
| EN ISO 21572-2004 |
食品.转基因有机物和衍生产品的检测方法.基于蛋白质的方法 |
|
| EN ISO 216-2001 |
书写纸和某些印刷纸裁切后尺寸A和B系列 |
Writing paper and certain classes of printed matter - Trimmed sizes - A and B series (ISO 216:1975) |
| EN ISO 2160-1998 |
石油产品对铜的腐蚀性铜片腐蚀试验 |
Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
| EN ISO 2162-1-1996 |
技术产品文件弹簧第1部分：简化表示法 |
Technical product documentation - Springs - Part 1: Simplified representation (ISO 2162-1:1993) |
| EN ISO 2162-2-1996 |
技术产品文件弹簧第2部分：圆柱螺旋形压力弹簧数据的表示 |
Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs (ISO 2162-2:1993) |
| EN ISO 2162-3-1996 |
技术产品文件弹簧第3部分：词汇 |
Technical product documentation - Springs - Part 3: Vocabulary (ISO 2162-3:1993) |
| EN ISO 21647-2004 |
医用电气设备.呼吸气监测器的基本安全和性能的特殊要求 |
|
| EN ISO 21670-2003 |
带凸缘的六角焊接螺母 |
Hexagon weld nuts with flange (ISO 21670:2003) |
| EN ISO 2177-1994 |
金属覆盖层覆盖层厚度测量阳极溶解库仑法 |
Metallic coatings - Measurement of coating thickness - Coulometer method by anodic dissolution (ISO 2177:1985) |
| EN ISO 2177-2004 |
金属镀层.镀层厚度的测量.阳极分解的电量计法 |
|
| EN ISO 2178-1995 |
磁性机体上的非磁性覆盖层覆盖层厚度的测量磁性法 |
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:1982) |
| EN ISO 2203-1997 |
技术制图齿轮的习惯画法 |
Technical drawings - Conventional representation of gears (ISO 2203:1973) |
| EN ISO 2231-1995 |
橡胶或塑料涂覆织物状态调节和试验的标准环境 |
Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989) |
| EN ISO 2233-2001 |
包装满装的运输包装和单货物试验条件 |
Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000) |
| EN ISO 2234-2002 |
包装 满装运输包装和单件货物 静载荷法堆积试验 |
Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000) |
| EN ISO 2244-2002 |
包装 满装运输包装和单件货物 水平冲击试验 |
Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000) |
| EN ISO 2247-2002 |
包装 满装运输包装和单件货物 固定低频振动试验 |
Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000) |
| EN ISO 228-1-2003 |
非螺纹密封的管螺纹第1部分：标记、尺寸和公差 |
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN ISO 228-2-2003 |
非螺纹密封的管螺纹第2部分：用极限量规检验 |
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987) |
| EN ISO 2286-1-1998 |
橡胶或塑料涂覆织物整卷特性测定第1部分：长度、宽度和净重的测定方法 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:1998) |
| EN ISO 2286-2-1998 |
橡胶或塑料涂覆织物整卷特性测定第2部分：单位面积总质量、单位面积涂胶量和衬底单位面积质量的测定方 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998) |
| EN ISO 2286-3-1998 |
橡胶或塑料涂覆织物整卷特性测定第3部分：厚度测定方法 |
Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998) |
| EN ISO 2320-1997 |
有效力矩型钢六角锁紧螺母机械和工作性能 |
Prevailing torque type steel hexagon nuts - Mechanical and performance requirements (ISO 2320:1997) |
| EN ISO 2338-1997 |
不淬硬钢和奥氏体不锈钢圆锥销 |
Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997) |
| EN ISO 23429-2004 |
六角凹头量规 |
|
| EN ISO 2360-1995 |
非磁性基金属上非导电涂层镀层厚度的测量涡流法 |
Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method (ISO 2360:1982) |
| EN ISO 2361-1995 |
磁性和非磁性基体上的镍电度层镀层厚度的测量磁性法 |
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982) |
| EN ISO 2398-1997 |
织物增强的压缩空气用橡胶软管规范 |
Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995) |
| EN ISO 2409-1994 |
色漆和清漆划格试验 |
Paints and varnishes - Cross-cut test (ISO 2409:1992) |
| EN ISO 2411-2000 |
橡胶或塑料涂覆织物涂层粘合强度的测定 |
Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000) |
| EN ISO 2417-2002 |
皮革物理与机械性的试验静态吸水性的测定 |
Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO 2417:2002) |
| EN ISO 2418-2002 |
皮革化学、物理和机械性与色牢度的测试取样部位 |
Leather - Chemical, physical and mechanical and fastness tests - Sampling location (ISO 2418:2002) |
| EN ISO 2419-2002 |
皮革物理与机械性的试验样品准备和调节 |
Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2002) |
| EN ISO 2420-2002 |
皮革物理与机械性的试验视密度的测定 |
Leather - Physical and mechanical tests - Determination of apparent density (ISO 2420:2002) |
| EN ISO 24234-2004 |
牙医学.牙科用汞齐合金用汞及合金 |
|
| EN ISO 2439-2000 |
软质泡沫聚合材料硬度的测定（压痕法） |
Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:1997, including Technical Corrigendum 1:1998) |
| EN ISO 2440-1999 |
软质和硬质泡沫聚合材料加速老化试验 |
Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997) |
| EN ISO 2450-1999 |
奶油脂肪含量的测定重量分析法(参照法) |
Cream - Determination of fat content - Gravimetric method (Reference method) (ISO 2450:1999) |
| EN ISO 2495-2000 |
铁蓝颜料规范和测试方法 |
Iron blue pigments - Specifications and methods of test (ISO 2495:1995) |
| EN ISO 252-1-1999 |
织物传输带层与层之间的粘合强度第1部分：试验方法 |
Textile conveyor belts - Adhesive strength between constitutive elements - Part 1: Methods of test (ISO 252-1:1999) |
| EN ISO 2535-2002 |
塑料不饱和聚脂树脂25℃时胶凝时间的测量 |
Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001) |
| EN ISO 2538-2003 |
产品几何量技术规范(GPS)棱体的角度和斜度系列 |
Geometrical product specifications (GPS) - Series of angles and slopes on prisms (ISO 2583:1998) |
| EN ISO 2554-1998 |
塑料不饱和聚脂树脂羟基值的测定 |
Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997) |
| EN ISO 2555-1999 |
塑料液态或乳态或分散状树脂用落球式粘度计测定表观粘度 |
Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield test method (ISO 2555:1989) |
| EN ISO 2556-2000 |
塑料在大气压力下薄膜和薄板的透气率的测定测压法 |
Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974) |
| EN ISO 2566-1-1999 |
钢伸长值的换算第1部分：碳素钢和低合金钢 |
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN ISO 2566-2-1999 |
钢伸长值的换算第2部分：奥氏体钢 |
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
| EN ISO 2578-1998 |
塑料长期热暴露作用后时间和温度极限的测定 |
Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993) |
| EN ISO 2580-1-2002 |
塑料丙烯晴-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料第1部分：命名系统和基本规范 |
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002) |
| EN ISO 2580-2-1999 |
塑料丙烯晴-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料第2部分：试样的制备和性能的测定 |
Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:1994) |
| EN ISO 2589-2002 |
皮革物理与机械性的试验厚度的测量 |
Leather - Physical and mechanical tests - Determination of thickness (ISO 2589:2002) |
| EN ISO 2592-2001 |
闪点和燃点的测定克利夫开口杯法 |
Determination of flash and fire points - Cleveland open cup method (ISO 2592:2000) |
| EN ISO 2624-1995 |
铜和铜合金平均晶粒度的测定方法 |
Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
| EN ISO 2626-1995 |
铜氢脆试验 |
Copper - Hydrogen embrittlement test (ISO 2626:1973) |
| EN ISO 2639-2002 |
钢渗碳层和硬化层的深度的测定和检验 |
Steel - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002) |
| EN ISO 266-1997 |
声学优先频率 |
Acoustics - Preferred frequencies (ISO 266:1997) |
| EN ISO 2702-1994 |
热处理钢自攻螺钉机械性能 |
Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992) |
| EN ISO 2719-2002 |
闪点的测定 宾斯克-马丁闭口杯法 |
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2002) |
| EN ISO 2738-1999 |
烧结金属材料不包括硬质金属密度、含油量和开口率的测定 |
Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999) |
| EN ISO 2739-1998 |
烧结金属衬套径向抗压强度的测定 |
Sintered metal bushes - Determination of radial crushing strength (ISO 2739:1973) |
| EN ISO 2740-1999 |
烧结金属材料不包括硬质金属拉伸试样 |
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:1999) |
| EN ISO 2758-2003 |
纸 抗破裂强度的测定 |
Paper - Determination of bursting strength (ISO 2758:2001) |
| EN ISO 2759-2003 |
纸板 抗破裂强度的测定 |
Board - Determination of bursting strength (ISO 2759:2001) |
| EN ISO 2789-2003 |
信息和文献国际标准图书馆统计学 |
Information and documentation - International library statistics (ISO 2789:2003) |
| EN ISO 2808-1999 |
色漆和清漆清膜厚度的测定 |
Paints and varnishes - Determination of film thickness (ISO 2808:1997) |
| EN ISO 2810-2004 |
涂料和清漆.涂层的自然老化.暴露和评估 |
|
| EN ISO 2811-1-2001 |
色漆和清漆密度的测定第1部分：比重瓶法 |
Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811-1:1997) |
| EN ISO 2811-2-2001 |
色漆和清漆密度的测定第2部分：落球法 |
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:1997) |
| EN ISO 2811-3-2001 |
色漆和清漆密度的测定第3部分：潜体法 |
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:1997) |
| EN ISO 2811-4-2001 |
色漆和清漆密度的测定第4部分：压杯法 |
Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:1997) |
| EN ISO 2812-1-1994 |
色漆和清漆耐液体的测定第1部分 ：通用方法 |
Paints and varnishes - Determination of resistance to liquids - Part 1: General methods (ISO 2812-1:1993) |
| EN ISO 2812-2-1994 |
色漆和清漆耐液体的测定第2部分：水浸法 |
Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:1993) |
| EN ISO 2813-1999 |
色漆和清漆在20 °、60 °和85 °非金属漆膜镜面光泽的测定 |
Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20 °60 °und 85 °(ISO 2813:1994, including Technical Corrigendum 1:1997) |
| EN ISO 2815-2003 |
色漆和清漆巴克霍尔压痕试验 |
Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
| EN ISO 2818-1996 |
塑料试样的机加工制备 |
Plastics - Preparation of test specimens by machining (ISO 2818:1994) |
| EN ISO 2819-1994 |
金属基体上的金属层覆盖层电镀和化学沉积层附着力试验方法评述 |
Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:1980) |
| EN ISO 283-1-2000 |
织物传输带全后度拉伸试验第1部分：在标准负荷下拉伸强度、拉断伸长及定伸的测定 |
Textile conveyor belts - Full thickness tensile testing - Part 1: Determination of tensile strength, elongation at break and elongation at the reference load (ISO 283-1:2000) |
| EN ISO 284-2003 |
传输带导电率规范和试验方法 |
Conveyor belts - Electrical conductivity - Specification and test methodes (ISO 284:2003) |
| EN ISO 2860-1999 |
土方机械最小人口尺寸 |
Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) |
| EN ISO 2867-1998 |
土方机械通道装置 |
Earth-moving machinery - Access systems (ISO 2867:1994) |
| EN ISO 2870-1994 |
表面活性剂洗涤剂酸性条件下可水解的和不可水解的阴离子活性物的测定 |
Surface active agents - Detergents - Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions (ISO 2870:1986) |
| EN ISO 2871-1-1994 |
表面活性剂洗涤剂阳离子活性物含量的测定第1部分：高分子质量阳离子活性物 |
Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1-1988) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com