标准号 |
中文名称 |
英文名称 |
| EN 1748-1-1-2004 |
建筑玻璃.特种基础产品.硼硅酸盐玻璃.第1-1部分:定义和一般物理和机械性能 |
|
| EN 1748-1-1997 |
建筑玻璃 专用基本产品 第1部分：硼硅酸盐玻璃 |
Glass in building - Special basic products - Part 1: Borosilicate glasses |
| EN 1748-1-2-2004 |
建筑用玻璃.特种基础产品.硼硅酸盐玻璃.第1-2部分:合格评价/产品标准 |
|
| EN 1748-2-1-2004 |
建筑玻璃.特种基础产品.玻璃陶瓷.第2-1部分:定义和一般物理和机械性能 |
|
| EN 1748-2-1997 |
建筑玻璃 专用基本产品 第2部分：玻璃陶瓷 |
Glass in building - Special basic products - Part 2: Glass ceramics |
| EN 1748-2-2-2004 |
建筑用玻璃.特种基础产品.玻璃陶瓷.第2-2部分:合格评价/产品标准 |
|
| EN 175-1997 |
个人防护 焊接和类似加工中眼睛和面部的防护设备 |
Personal protection - Equipment for eye and face protection during welding and allied processes |
| EN 1751-1998 |
建筑物通风 气路终端设备 阀与阀门的气动试验 |
Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves |
| EN 175101-802-1999 |
详细规范：带有3或4排2.54mm基本网格的许多接触件的印制板用两件式连接器 |
Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
| EN 175101-809-1999 |
详细规范：经质量评定的符合CECC75101-801的带有短结构2.54mm网格的印制板用两件式连接器 |
Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75101-801, with assessed quality |
| EN 175101-809-2004 |
详细规范.短结构符合CECC 75101-801的经质量评定的有2.54mm格栅的印制板用两件式连接器 |
|
| EN 175200-1996 |
分规范：圆形连接器 |
Sectional specification: Circular connectors |
| EN 175201-804-1999 |
详细规范：圆形连接器螺纹接头直径为1.6mm的圆接触件 |
Detail specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling |
| EN 175300-1996 |
分规范：频率在3MHz以下的矩形连接器 |
Sectional specification: Rectangular connectors for frequencies below 3 MHz |
| EN 175301-801-1999 |
详细规范：圆形可拆卸压接型接触件高密度矩形连接器 |
Detail specification: High density rectangular connectors, round removable crimp contacts |
| EN 175301-803-1999 |
详细规范：矩形连接器带不可拆卸锁定螺钉的厚度为0.8mm的偏平接触件 |
Detail specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable |
| EN 1754-1997 |
镁和镁合金 镁和镁合金氧化极、铸锭和铸件命名体系 |
Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system |
| EN 1755-2000 |
工业用卡车的安全 潜在爆炸环境下的操作 在可燃气体、蒸气、 潮湿和灰尘中使用 |
Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust |
| EN 175500-1997 |
分规范：包括批准和能力批准的连接器用电缆引出端附件 |
Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval |
| EN 1756-1-2001 |
后置升降装置 安装在用轮子行驶的车辆上的平台式升降装置 安全要求 第1部分：货物用后置升降装置 |
Tail lifts - Platform lifts for mounting on wheeled vehicles; Safety requirements - Part 1: Tail lifts for goods |
| EN 1756-2-2004 |
尾部提升机.轮式车辆上安装的平台式提升机.安全要求.第2部分:乘客用尾部提升机 |
|
| EN 1757-1-2001 |
工业卡车的安全性 非专业人员用货车 第1部分：堆货手推车 |
Safety of industrial trucks - Pedestrian propelled trucks - Part 1: Stacker trucks |
| EN 1757-2-2001 |
工业卡车的安全性 非专业人员用货车 第2部分：手推叉车 |
Safety of industrial trucks - Pedestrian propelled trucks - Part 2: Pallet trucks |
| EN 1757-3-2002 |
工业卡车的安全性 非专业人员手控和半手控卡车 第3部分：站台车 |
Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks |
| EN 1757-4-2003 |
工业卡车的安全性 人力推进装卸车 第4部分：带杠杆升降的手推叉车 |
Safety of industrial trucks - Pedestrian propelled trucks - Part 4: Scissor lift pallet-trucks |
| EN 1758-1997 |
铜及铜合金 引线架用带材 |
Copper and copper alloys - Strip for lead frames |
| EN 1759-1-2004 |
法兰及其连接件.等级标示的管、阀、配件和附件用圆形法兰.第1部分:钢法兰.NPS 1/2至24 |
|
| EN 1759-3-2003 |
法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第2部分：铜合金法兰 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 3: Copper alloy flanges |
| EN 1759-3-2004 |
法兰及其接头.等级标示的管、阀、配件和附件用圆形法兰.第3部分:铜合金法兰 |
|
| EN 1759-4-2003 |
法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第4部分：铝合金法兰 |
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
| EN 176-1991 |
具低吸水率的粉末挤压陶瓷瓷砖（E ≤3%） BI组 |
Dust-pressed ceramic tiles with a low water absorption (E≤3 %) - Group BI |
| EN 1760-1-1997 |
机械安全 压敏防护装置 第1部分：压敏垫和压敏地板的设计和试验的一般原则 |
Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 1760-2-2001 |
机械安全 压敏防护装置 第2部分：压敏边缘和压敏棒设计和试验的一般原则 |
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 1760-3-2004 |
机器的安全性.压敏保护装置.第3部分:压敏减震器、压敏板、压敏线和类似设备的设计和试验的一般准则 |
|
| EN 1761-1999 |
燃料卡车送货用的橡胶软管和软管组件 规范 |
Rubber hoses and hose assemblies for fuel truck delivery - Specification |
| EN 1762-1997 |
气压为25bar(2.5MPa)及以下的液化石油气LPG(液相或气相)及天然气用橡胶软管和软管组件 规范 |
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| EN 1765-1997 |
油的吸放装置用橡胶软管组装件 组装件规范 |
Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| EN 1765-2004 |
油的吸放设备用橡胶软管组件.组件规范 |
|
| EN 1766-2000 |
混凝土结构防护和修理用产品和系统 试验方法 试验用基准混凝土 |
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
| EN 1767-1999 |
混凝土结构防护和修理用的产品和系统 试验方法 红外分析 |
Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis |
| EN 177-1991 |
具吸水率3% |
Dust-pressed ceramic tiles with a water absorption of 3 % |
| EN 1770-1998 |
混凝土结构防护和修理用的产品和系统 试验方法 热膨胀系数的测定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion |
| EN 1771-2004 |
混凝土结构的保护和修复用产品和系统.试验方法.使用沙柱试验测定可注入性 |
|
| EN 1772-2000 |
表面活性剂 用浸渍法测定润湿力(ISO 8022-1990修正) |
Surface active agents - Determination of wetting power by immersion (ISO 8022:1990, modified) |
| EN 1773-1996 |
纺织品 织物 宽度和长度测定 |
Textiles - Fabrics - Determination of width and length |
| EN 1774-1997 |
锌和锌合金 铸造用合金 铸锭和铸液 |
Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid |
| EN 1776-1998 |
供气 天然气测量站 功能要求 |
Gas supply systems - Natural gas measuring stations - Functional requirements |
| EN 1777-2004 |
消防和救援设备用液压平台.安全要求和检验 |
|
| EN 1778-1999 |
焊接热塑结构特性值 热塑设备设计的允许应力和模量的测定 |
Characteristic values for welded thermoplastic constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment |
| EN 1779-1999 |
无损检验 漏泄试验 方法和技术选择标准 |
Non-destructive testing - Leak testing - Criteria for method and technique selection |
| EN 178-1991 |
具吸水率6% |
Dust-pressed ceramic tiles with a water absorption of 6 % |
| EN 1780-1-2002 |
铝和铝合金 再熔化母合金和铸件用合金铝铸锭标识 第1部 分：数字标识体系 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| EN 1780-2-2002 |
铝和铝合金 再熔化母合金及铸件用合金铝铸锭标识 第2部分：基于化学符号标识体系 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
| EN 1780-3-2002 |
铝和铝合金 再熔化母合金及铸件用合金铝铸锭标识 第1部分：数字标识体系 |
Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical compositon |
| EN 1782-1998 |
气管导管和连接器 |
Tracheal tubes and connectors |
| EN 1784-2003 |
食品 经过辐射含脂肪的食品的检测 碳氢化合物的气相色谱分析 |
Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic analysis of hydrocarbons |
| EN 1785-2003 |
食品 经过辐射含脂肪的食品的检测 二烷基环丁酮的气相色谱/质谱分析 |
Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones |
| EN 1786-1996 |
食品 含骨辐射食品的检测 ESR法 |
Foodstuffs - Detection of irradiated food containing bone - Method by ESR spectroscopy |
| EN 1787-2000 |
食物 用ESR法检测含纤维素经过辐射的食品 |
Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy |
| EN 1788-2001 |
食品 硅酸盐矿物可与其分隔的辐射食品的热致发光检测 |
Foodstuffs - Thermoluminescence detection of irradiated food from which silicate minerals can be isolated |
| EN 1790-1998 |
道路标记材料 预制道路标记 |
Road marking materials - Preformed roads markings |
| EN 1790/prA1-2001 |
道路标记材料 预制道路标记 修改A1 |
Road marking materials - Preformed roads markings; Amendment A1 |
| EN 1791-1997 |
表面活性剂 脂肪烷基二甲胺氧化物 胺氧化物含量测定 |
Surface active agents - Fatty alkyl dimethyl amine oxides - Determination of the amine oxide content |
| EN 1792-2003 |
焊接 焊接和相关工多语种术语表 |
Welding - Multilingual list of terms for welding and related processes |
| EN 1793-1-1997 |
道路交通噪声减低装置 测定声学性能的试验方法 第1部分：声音吸收的本征特性 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption |
| EN 1793-2-1997 |
道路交通噪声减低装置 声学性能测定的试验方法 第2部分：气载声音绝缘的固有特性 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation |
| EN 1793-3-1997 |
道路交通噪声减低装置 声学性能测定的试验方法 第3部分：标准化交通噪声频谱 |
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum |
| EN 1794-1-2003 |
道路交通噪声降低装置 非声学性能 第1部分：机械性能和稳定性要求 |
Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements |
| EN 1794-2-2003 |
道路交通噪声降低装置 非声学性能 第2部分：一般安全和环境要求 |
Road traffic noise reducing devices - Non-acoustic performance - Part 2: General safety and environmental requirements |
| EN 1795-1997 |
可运输气瓶(不含LPG) 变动煤设备的程序 |
Transportable gas cylinders (excluding LPG) - Procedures for change of gas service |
| EN 1797-2001 |
低温容器 气体/材料兼容性 |
Cryogenic vessels - Gas/material compatibility |
| EN 1799-1998 |
混凝土结构的防护和修理用产品和系统 试验方法 应用于混凝土表面 的结构胶粘剂的适应性的测量试验 |
Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface |
| EN 180101-1995 |
通用规范 固定式光纤衰减器 |
Generic specification: Fixed fibre optic attenuators |
| EN 1802-2002 |
可运输气瓶 无缝铝合金气瓶的周期检验和试验 |
Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders |
| EN 1803-2002 |
可运输气瓶 焊接碳钢周期检验和试验 |
Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders |
| EN 1804-1-2001 |
地下采矿机械 水压坑道顶棚支架的安全要求 第1部分：支撑单位和一般要求 |
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements |
| EN 1804-2-2001 |
地下采矿机械 水压坑道顶棚支架的安全要求 第2部分：动力调整支架和活塞 |
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams |
| EN 1806-2000 |
烟窗 单壁烟窗粘土/ 陶瓷烟道设备 要求和试验方法 |
Chimneys - Clay/ceramic flue blocks for single-wall chimneys - Requirements and test methods |
| EN 1807-1999 |
木工机械的安全 带锯机械 |
Safety of woodworking machines - Band sawing machines |
| EN 1808-1999 |
悬浮通道设备的安全要求 设计计算 稳定性准则 结构试验 |
Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests |
| EN 1809-1997 |
潜水附件 浮力补偿器 功能和安全要求 试验方法 |
Diving accessories - Buoyancy compensators - Functional and safety requirements, test methods |
| EN 1810-1998 |
人体部位穿孔用成套组件 火焰原子吸收分光光度法测定镍含量的基准试验方法 |
Body-piercing post assemblies - Reference test method for determination of nickel content by flame atomic absorption spectrometry |
| EN 181000-1994 |
通用规范：光纤分路器 |
Generic specification: Fibre optic branching devices |
| EN 1811-1998 |
直接和长时间接触皮肤的产品中镍释放量的基准试验方法 |
Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin |
| EN 181101-1994 |
空白详细规范：光纤分路器类型：非波长选择传输的星形连接 |
Blank detail specification: Fibre optic branching devices - Type: Non wavelength selective transmissive star |
| EN 181102-1994 |
空白详细规范：光纤分路器类型：波长选择传输的星形连接 |
Blank detail specification: Fibre optic branching devices - Type: Wavelength selective transmissive star |
| EN 181103-1997 |
空白详细规范：光纤分路器类型：电信用非波长选择传输的星形连接 |
Blank detail specification: Fibre optic branching devices - Type: Non wavelength selective transmissive star for telecommunication application |
| EN 181104-1997 |
空白详细规范：光纤分路器类型：电信用波长选择传输的星形连接 |
Blank detail specification: Fibre optic branching devices - Type: Wavelength selective transmissive star for telecommunication application |
| EN 1813-1997 |
铺地织物 用研磨机器对羊毛纤维完整性的测定 |
Textile floor coverings - Determination of wool fibre integrity using an abrasion machine |
| EN 1814-1997 |
铺地织物 用改良威特曼鼓试验测定耐切边损害性 |
Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
| EN 1815-1997 |
弹性地板和铺地织物 静电性能评估 |
Resilient and textile floor coverings - Assessment of static electrical propensity |
| EN 1816-1998 |
弹性地板覆盖物 带有泡沫衬背的同质和不同质光滑橡胶地板覆盖物规范 |
Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing |
| EN 1817-1998 |
弹性地板覆盖物 同质和不同质光滑橡胶地板覆盖物规范 |
Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings |
| EN 1818-1998 |
弹性地板覆盖物 荷载重载小脚轮影响的测定 |
Resilient floor coverings - Determination of the effect of loaded heavy duty castors |
| EN 1819-1997 |
气管插管喉镜 特殊要求 |
Laryngoscopes for tracheal intubation - Particular requirements |
| EN 1820-1997 |
麻醉储藏袋 |
Anaesthetic reservoir bags |
| EN 1821-1-1996 |
电动道路车辆 道路运行能力的测量 第1部分：纯电动车辆 |
Electrically propelled road vehicles - Measurement of road operating ability - Part 1: Pure electric vehicles |
| EN 1821-2-1999 |
电动道路车辆 道路运行能力的测量 第2部分：热电动复合动力车 |
Electrically propelled road vehicles - Measurement of road operating ability - Part 2: Thermal electric hybrid vehicles |
| EN 1822-1-1998 |
高效空气过滤器(HEPA和ULPA) 第1部分：分类、性能试验和标记 |
High efficiency air filters (HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| EN 1822-2-1998 |
高效空气过滤器(HEPA和ULPA) 第二部分： 悬浮微粒产生、测量设备、颗粒计数统计 |
High efficiency air filters (HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics |
| EN 1822-3-1998 |
高效空气过滤器(HEPA和ULPA) 第3部分：试验扁片状过滤介质 |
High efficiency air filters (HEPA and ULPA) - Part 3: Testing flat sheet filter media |
| EN 1822-4-2000 |
高效颗粒空气过滤器 第4部分：滤器件的渗漏率测定（扫描法） |
High efficiency particulate air filters (HEPA and ULPA) - Part 4: Determining leakage of filter element (Scan method) |
| EN 1822-5-2000 |
高效颗粒空气过滤器 第5部分：滤器件的功效测定（扫描法） |
High efficiency particulate air filters (HEPA and ULPA) - Part 5: Determining the efficiency of the filter element |
| EN 1824-1998 |
道路标记材料 道路试件 |
Road marking materials - Road trials |
| EN 1825-1-2004 |
油脂分离器.第1部分:设计、性能和试验以及标记和质量控制的准则 |
|
| EN 1825-2-2002 |
油脂分离器 第2部分：标称尺寸的选择、安装、操作和维修 |
Grease separators - Part 2: Selection of nominal size, installation, operation and maintenance |
| EN 1826-1996 |
生物工艺技术 大规模加工和生产 原材料控制程序 |
Biotechnology - Large-scale process and production - Control procedures for raw materials |
| EN 1827-1999 |
呼吸保护装置 防止气体或气体和微粒或仅防颗粒的无吸入阀和带可分离过滤器的半掩面罩 要求、试验和标记 |
Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
| EN 1828-2002 |
健康信息学 外科程序的分类和编码体系的类别结构 |
Health informatics - Categorial structure for classifications and coding systems of surgical procedures |
| EN 1834-1-2000 |
往复式内燃发动机 用在潜在爆炸环境下发动机设计结构和安全要求 第1部分：用在可燃气体和蒸气环境的II组 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres |
| EN 1834-2-2000 |
往复式内燃发动机 用在潜在爆炸环境下发动机设计结构和安全要求 第2部分：对沼气和/或可燃性尘土敏感地下 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
| EN 1834-3-2000 |
往复式内燃发动机 用在潜在爆炸环境下发动机设计结构和安全要求 第3部分：用在可燃灰尘环境下的II组发动 |
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres |
| EN 1835-1999 |
呼吸保护装置 带有头盔和头罩的轻型结构压缩空气的线状呼吸装置 要求、试验、标记 |
Respiratory protective devices - Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood - Requirements, testing, marking |
| EN 1836-1997 |
人的眼睛保护 常规使用的太阳镜和滤光镜 |
Personal eye protection - Sunglasses and sunglare filters for general use |
| EN 1836/prA2-2003 |
人的眼睛保护 常规使用的太阳镜和滤光镜 修改A2 |
Personal eye protection - Sunglasses, sunglare filters for general use and filters for direct observation of the sun; Amendment A2 |
| EN 1837-1999 |
机械的安全 机械的整体照明 |
Safety of machinery - Integral lighting of machines |
| EN 1838-1999 |
照明设施 应急照明 |
Lighting applications - Emergency lighting |
| EN 1839-2003 |
气体和蒸气爆炸限值的测定 |
Determination of explosion limits of gases und vapours |
| EN 1841-1998 |
粘合剂 地板覆盖物和墙壁覆盖物用粘合剂的试验方法 与粘合剂粘接的油毡地板覆盖物尺寸变化的测定 |
Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
| EN 1842-1997 |
塑料 热固模塑化合物(SMC-BMC).压制模缩测定 |
Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com