标准号 |
中文名称 |
英文名称 |
EN ISO 2871-2-1994 |
表面活性剂洗涤剂阳离子活性物含量的测定第2部分:低分子质量(200~500)阳离子活性物 |
Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2-1990) |
EN ISO 2873-2002 |
包装 满装运输包装和单件货物 低压试验 |
Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000) |
EN ISO 2875-2002 |
包装 满装运输包装和单件货物 喷水试验 |
Packaging - Complete, filled transport packages and unit loads - Water-spray test (ISO 2875:2000) |
EN ISO 2897-1-1999 |
塑料耐冲击聚苯乙烯(PS-I)模塑和挤塑材料第1部分:命名系统和基本规范 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997) |
EN ISO 2897-2-1999 |
塑料耐冲击聚苯乙烯(PS-I)模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:1994, including Technical Corrigendum 1:1995) |
EN ISO 2898-1-1999 |
塑料增塑聚氯乙烯(PVC-P)模塑和挤塑材料第1部分:命名系统和基本规范 |
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996) |
EN ISO 2898-2-1999 |
塑料增塑聚氯乙烯(PVC-P)模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:1997) |
EN ISO 291-1997 |
塑料状态调节和试验用标准大气压 |
Plastics - Standard atmospheres for conditioning and testing (ISO 291:1997) |
EN ISO 2922-2000 |
声学内河水道上和港口中的船舶辐射的空气声的测量 |
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000) |
EN ISO 293-2003 |
塑料热塑性材料的压模塑试样 |
Plastics - Compression moulding test specimens of thermoplastic materials (ISO 293:1986) |
EN ISO 294-2-1998 |
塑料热塑性材料试样的注模塑法第2部分:小拉伸棒 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996) |
EN ISO 294-3-2003 |
塑料热塑性材料试样的注模塑法第3部分:小板 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002) |
EN ISO 294-4-2003 |
塑料热塑性材料试样的注模塑法第4部分:模塑收缩率的测定 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001) |
EN ISO 295-1998 |
塑料热固性材料试样的压模塑法 |
Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:1991) |
EN ISO 295-2004 |
塑料.热固性材料试样的压模塑法 |
|
EN ISO 3001-1999 |
塑料环氧化合物环氧基当量的测定 |
Plastics - Epoxy compounds - Determination of epoxy equivalent (ISO 3001:1999) |
EN ISO 3037-1996 |
瓦楞纸板边缘抗碾性的测定(边缘未浸腊法) |
Corrugated fibreboard - Determination of edgewise crush resistance (Unwaxed edge method) (ISO 3037:1994) |
EN ISO 305-1999 |
塑料聚氯乙烯和有关均聚合物和共聚物及其混合物的热稳定性的测定色变法 |
Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine - Containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:1990) |
EN ISO 3059-2001 |
无损检测渗透检验与磁性粒子检验检视条件 |
Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2001) |
EN ISO 306-1996 |
塑料热塑性材料维卡软化温度的测定 |
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:1994) |
EN ISO 306-2004 |
塑料.热塑性材料.维卡特(VICAT)软化温度的测定(VST) |
|
EN ISO 307-2003 |
塑料聚酰胺粘度值的测定 |
Plastics - Polyamides - Determination of viscosity number (ISO 307:2003) |
EN ISO 308-1997 |
塑料酚醛模塑材料丙酮可溶性物质(在未模塑状态时表现树脂含量)的测定 |
Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994) |
EN ISO 3098-0-1997 |
技术产品文件文字第0部分:一般要求 |
Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997) |
EN ISO 3098-2-2000 |
技术产品文件文字第2部分:拉丁字母表、数字和符号 |
Technical product documentation - Lettering - Part 2: Latin alphabet, numeral and marks (ISO 3098-2:2000) |
EN ISO 3098-3-2000 |
技术产品文件文字第3部分:希腊字母表 |
Technical product documentation - Lettering - Part 3: Greek alphabet (ISO 3098-3:2000) |
EN ISO 3098-4-2000 |
技术产品文件文字第4部分:拉丁字母表用的区分标记和特殊标记 |
Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet (ISO 3098-4:2000) |
EN ISO 3098-5-1997 |
技术产品文件文字第5部分:拉丁字母,数字和标志的CAD文字分类法 |
Technical product documentation - Lettering - Part 5: CAD lettering of the Latin alphabet, numerals and marks (ISO 3098-5:1997) |
EN ISO 3098-6-2000 |
技术产品文件文字第6部分:西里尔字母表 |
Technical product documentation - Lettering - Part 6: Cyrillic alphabet (ISO 3098-6:2000) |
EN ISO 3104-1996 |
石油产品透明和不透明石油液体运动粘度的测定和动力粘度的计算 |
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
EN ISO 3107-2004 |
牙医学.锌氧化物/丁香酸和锌氧化物/非丁香酸粘固粉 |
|
EN ISO 3164-1999 |
土方机械保护结构的实验室鉴定挠曲极限的规范 |
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995) |
EN ISO 3166-1-1997 |
国家和他们的地区名的代码第1部分:国家代码 |
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:1997) |
EN ISO 3167-2003 |
塑料多用途试验用试样 |
Plastics - Multipurpose test specimens (ISO 3167:2002) |
EN ISO 3170-1998 |
石油液体人工采样 |
Petroleum liquids - Manual sampling (ISO 3170:1988, including Amendment 1:1998) |
EN ISO 3170-2004 |
石油液体.人工采样 |
|
EN ISO 3171-1999 |
石油液体自动管线的采样 |
Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
EN ISO 3175-1-1998 |
纺织品干洗和整理第1部分:纺织品和服装可洗净性评估方法 |
Textiles - Dry-cleaning and finishing - Part 1: Method for assessing the cleanability of textiles and garments (ISO 3175-1:1998) |
EN ISO 3175-2-1998 |
纺织品干洗和整理第2部分:四氯乙烯程序 |
Textiles - Dry-cleaning and finishing - Part 2: Procedures for tetrachloroethene (ISO 3175-2:1998) |
EN ISO 3175-3-2003 |
纺织品机械干洗稳定性的评估 第3部分:用烃溶剂清洗和整理时试验性能的程序 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using in hydrocarbon solvents (ISO 3175-3:2003) |
EN ISO 3175-4-2003 |
纺织品织物和衣服的专业护理、干洗和湿洗 用模拟湿洗洗涤和整理时性能试验的程序 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO 3175-4:2003) |
EN ISO 3188-1994 |
淀粉和淀粉制品用凯氏法测定氮含量滴定法 |
Starches and derived products - Determination of nitrogen content by the Kjeldahl method - Titrimetric method (ISO 3188:1978) |
EN ISO 3219-1994 |
塑料液态或乳态或分散状的聚合物/树脂使用规定剪切率的旋转式粘度计测定粘度 |
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
EN ISO 3231-1997 |
色漆和清漆耐二氧化硫湿空气作用的测定 |
Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
EN ISO 3248-2000 |
色漆和清漆热效应的测定 |
Paints and varnishes - Determination of the effect of heat (ISO 3248:1998) |
EN ISO 3251-2003 |
色漆、清漆和色漆 非挥发物含量的测定 |
Paints, varnishes and plastics - Determination of non-volatile matter content (ISO 3251:2003) |
EN ISO 3252-2000 |
粉末冶金术语 |
Powder metallurgy - Vocabulary (ISO 3252:1999) |
EN ISO 3262-1-1998 |
涂料用填充剂规范和测试方法第1部分:导言和通用试验方法 |
Extenders for paints - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:1997) |
EN ISO 3262-10-2000 |
涂料用填充剂规范和测试方法第10部分:片状天然滑石 /亚氯酸盐 |
Extenders for paints - Specifications and methods of test - Part 10: Natural, talc/chlorite in lamellar form (ISO 3262-10:2000) |
EN ISO 3262-11-2000 |
涂料用填充剂规范和测试方法第11部分:含碳酸盐的片状天然滑石 |
Extenders for paints - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2000) |
EN ISO 3262-12-2001 |
涂料用填充剂规范和测试方法第12部分:白云母 |
Extenders for paints - Specifications and methods of test - Part 12: Muscovite-type mica (ISO 3262-12:2001) |
EN ISO 3262-13-1998 |
涂料用填充剂规范和测试方法第13部分:天然石英(矿物) |
Extenders for paints - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:1997) |
EN ISO 3262-14-2000 |
涂料用填充剂规范和测试方法第14部分:白硅石 |
Extenders for paints - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2000) |
EN ISO 3262-15-2000 |
涂料用填充剂规范和测试方法第15部分:透明石英 |
Extenders for paints - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2000) |
EN ISO 3262-16-2000 |
涂料用填充剂规范和测试方法第16部分:氢氧化铝 |
Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2000) |
EN ISO 3262-17-2000 |
涂料用填充剂规范和测试方法第17部分:沉淀硅酸钙 |
Extenders for paints - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2000) |
EN ISO 3262-18-2000 |
涂料用填充剂规范和测试方法第18部分:沉淀硅铝酸钠 |
Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000) |
EN ISO 3262-19-2000 |
涂料用填充剂规范和测试方法第19部分:沉淀二氧化硅(石英) |
Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2000) |
EN ISO 3262-2-1998 |
涂料用填充剂规范和测试方法第2部分:重晶石(天然硫酸钡) |
Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262-2:1998) |
EN ISO 3262-20-2000 |
涂料用填充剂规范和测试方法第20部分:喷雾二氧化硅(石英) |
Extenders for paints - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2000) |
EN ISO 3262-21-2000 |
涂料用填充剂规范和测试方法第21部分:石英沙(矿物天然石英) |
Extenders for paints - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2000) |
EN ISO 3262-22-2001 |
涂料用填充剂规范和测试方法第22部分:热碱处理的硅藻土 |
Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2001) |
EN ISO 3262-3-1998 |
涂料用填充剂规范和测试方法第3部分:沉淀硫酸钡 |
Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:1998) |
EN ISO 3262-4-1998 |
涂料用填充剂规范和测试方法第4部分:白垩 |
Extenders for paints - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:1998) |
EN ISO 3262-5-1998 |
涂料用填充剂规范和测试方法第5部分:天然结晶硫酸钙 |
Extenders for paints - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO 3262-5:1998) |
EN ISO 3262-6-1998 |
涂料用填充剂规范和测试方法第6部分:沉淀碳酸钙 |
Extenders for paints - Specifications and methods of test - Part 6: Precipitated calcium carbonate (ISO 3262-6:1998) |
EN ISO 3262-7-1998 |
涂料用填充剂规范和测试方法第7部分:白云石 |
Extenders for paints - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:1998) |
EN ISO 3262-8-1999 |
涂料用填充剂规范和测试方法第8部分:天然粘土 |
Extenders for paints - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:1999) |
EN ISO 3262-9-1998 |
涂料用填充剂规范和测试方法第9部分:煅烧粘土 |
Extenders for paints - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:1997) |
EN ISO 3269-2000 |
紧固件验收检查 |
Fasteners - Acceptance inspection (ISO 3269:2000) |
EN ISO 3274-1997 |
产品几何量技术规范(GPS)表面结构:轮廓法接触(触针)式仪器的标称特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996) |
EN ISO 3325-1999 |
煅结金属材料,不包括硬质金属横向断裂强度的测定 |
Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996) |
EN ISO 3336-1996 |
牙科学合成聚合物牙齿 |
Dentistry - Synthetic polymer teeth (ISO 3336:1993) |
EN ISO 3344-1997 |
增强制品含湿量的测定 |
Reinforcement products - Determination of moisture content (ISO 3344:1997) |
EN ISO 3376-2002 |
皮革物理与机械性试验抗拉强度与伸长率的测定 |
Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2002) |
EN ISO 3377-1-2002 |
皮革物理与机械性试验撕裂力的测定第1部分:单边撕裂 |
Leather - Physical and mechanical tests; Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2002) |
EN ISO 3377-2-2002 |
皮革物理与机械性试验撕裂力的测定第2部分:双向边缘撕裂 |
Leather - Physical and mechanical tests; Determination of tear load - Part 2: Double edge tear (ISO 3377-2:2002) |
EN ISO 3378-2002 |
皮革物理与机械性试验耐粒面裂纹和耐粒面裂纹指数的测定 |
Leather - Physical and mechanical tests - Determination of resistance to grain cracking and grain crack index (ISO 3378:2002) |
EN ISO 3380-2002 |
皮革物理与机械性试验收缩温度的测定 |
Leather - Physical and mechanical tests - Determination of shrinkage temperature (ISO 3380:2002) |
EN ISO 3382-2000 |
声学根据其他声学参数测量房间混向时间 |
Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters (ISO 3382:1997) |
EN ISO 3385-1995 |
软质泡沫聚合材料用恒定载荷冲击测定疲劳性能 |
Flexible cellular polymeric materials - Determination of fatigue constant-load pounding (ISO 3385:1989) |
EN ISO 3386-1-1997 |
软质泡沫聚合材料压缩应力应变特性的测定第1部分:低密度材料 |
Polymeric materials, cellular flexible - Determination of stress-strain characteristic in compression - Part 1: Low-density materials (ISO 3386-1:1986) |
EN ISO 3386-2-1998 |
软质泡沫聚合材料压缩应力应变特性的测定第2部分:高密度材料 |
Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997) |
EN ISO 3405-2000 |
石油产品常压下馏份特性的测定 |
Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000) |
EN ISO 3411-1999 |
土方机械司机的身体尺寸与司机的最小活动空间 |
Earth-moving machinery - Human physical dimensions of operators and minimum operator space envelope (ISO 3411:1995) |
EN ISO 3450-1996 |
土方机械轮胎式机械的制动系统系统和性能的要求及试验方法 |
Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996) |
EN ISO 3451-1-1997 |
塑料灰分的测定第1部分:一般方法 |
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:1997) |
EN ISO 3451-4-2000 |
塑料灰分的测定第4部分:聚酰胺 |
Plastics - Determination of ash - Part 4: Polyamides (ISO 3451-4:1998) |
EN ISO 3451-5-2002 |
塑料灰份的测定第5部分:聚氯乙烯 |
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5:2002) |
EN ISO 3452-2-2000 |
无损探伤渗透性探伤检验第2部分:渗透材料的测定 |
Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2000) |
EN ISO 3452-4-1998 |
无损探伤渗透性探伤检验第4部分:设备 |
Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998) |
EN ISO 3457-2003 |
土方机械挡板定义和要求 |
Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003) |
EN ISO 3497-2000 |
金属覆盖层镀层的厚度测量X射线光谱法 |
Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000) |
EN ISO 3506-1-1997 |
耐腐蚀不锈钢紧固件的机械性能第1部分:螺栓、螺钉和螺柱 |
Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997) |
EN ISO 3506-2-1997 |
耐腐蚀不锈钢紧固件的机械性能第2部分:螺母 |
Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 2: Nuts (ISO 3506-2:1997) |
EN ISO 3506-3-1997 |
耐腐蚀不锈钢紧固件的机械性能第3部分:紧定螺钉及类似的不受应力的螺纹紧固件 |
Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997) |
EN ISO 3506-4-2003 |
耐腐蚀不锈钢紧固件的机械性能第4部分:自攻螺钉 |
Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003) |
EN ISO 3521-1999 |
塑料不饱和聚酯和环氧树脂总体积收缩率的测定 |
Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997) |
EN ISO 354-2003 |
声学 混响室中声吸收的测量 |
Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN ISO 3543-2000 |
金属和非金属覆盖层厚度的测量β射线背散射法 |
Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000) |
EN ISO 3549-2002 |
色漆用锌粉颜料规范和试验方法 |
Zinc dust pigments for paints - Specifications and test methods (ISO 3549:1995) |
EN ISO 3582-2000 |
软质泡沫聚合材料小试样对小火焰水平方向燃烧特性的实验室评估 |
Flexible cellular polymeric materials - Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame (ISO 3582:2000) |
EN ISO 3593-1994 |
淀粉灰分的测定 |
Starch - Determination of ash (ISO 3593:1981) |
EN ISO 3596-2001 |
动植物油脂不皂化的测定乙醚提取法 |
Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using diethyl ether extraction (ISO 3596:2000) |
EN ISO 3613-2001 |
锌、镉、铝锌合金和锌铝合金的铬酸盐转化膜试验方法 |
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2000) |
EN ISO 3630-1-1994 |
牙根管器械第1部分:推管锉、扩大器、倒刺拔髓针、粗锉、糊剂输送器、探针及棉捻 |
Dental root-canal instruments - Part 1: Files, reamers, barbed broaches, rasps, paste carriers, explorers and cotton broaches (ISO 3630-1:1992) |
EN ISO 3630-2-2000 |
牙根管器械第2部分:扩大器 |
Dental root-canal instruments - Part 2: Enlargers (ISO 3630-2:2000) |
EN ISO 3630-3-1996 |
牙根管器械第3部分:聚光镜、充填器和摊开器 |
Dental root-canal instruments - Part 3: Condensers, pluggers and spreaders (ISO 3630-3:1994) |
EN ISO 3650-1998 |
产品几何技术规范(GPS)长度标准块规 |
Geometrical Product Specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998) |
EN ISO 3651-1-1998 |
不锈钢耐晶间腐蚀的测定第1部分:奥氏体和铁素奥氏体(二重)不锈钢用失重测定法在硝酸介质中的腐蚀试验( |
Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998) |
EN ISO 3651-2-1998 |
不锈钢耐晶间腐蚀的测定第2部分:奥氏体、奥氏体和铁素奥氏体(二重)不锈钢在硫酸介质中的腐蚀试验 |
Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998) |
EN ISO 3656-2002 |
动植物脂肪和油表示为特殊UV消失的紫外线吸收率的测定 |
Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction (ISO 3656:2002) |
EN ISO 3657-2003 |
动植物脂肪和油脂 皂化值的测定 |
Animal and vegetable fats and oils - Determination of saponification value (ISO 3657:2002) |
EN ISO 3668-2001 |
色漆和清漆色漆颜色的目视比色 |
Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998) |
EN ISO 3671-1998 |
塑料氨基模塑材料挥发性物质的测定 |
Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976) |
EN ISO 3672-1-2001 |
塑料不饱和聚酯树脂第1部分:命名体系 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000) |
EN ISO 3672-2-2001 |
塑料不饱和聚酯树脂第2部分:试样的制备和特性的测定 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000) |
EN ISO 3673-1-1999 |
塑料环氧树脂第1部分:命名 |
Plastics - Epoxy resins - Part 1 : Designation (ISO 3673-1:1996) |
EN ISO 3673-2-1999 |
塑料环氧树脂第2部分:试样的制备和特性的测定 |
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties (ISO 3673-2:1999) |
EN ISO 3675-1998 |
原油和液体石油产品密度实验室测定密度计法 |
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |