标准号 |
中文名称 |
英文名称 |
EN 3152-2004 |
航空航天系列.镀银或未涂覆的耐热钢FE-PA2601 (A286)制MJ螺纹自锁紧螺母.等级:1100 MPa(室温)/425 鳦.技术规范 |
|
EN 316-1999 |
木纤维板 定义、分类和符号 |
Wood fibreboards - Definition, classification and symbols |
EN 317-1993 |
碎料板和纤维板 在水中浸泡后膨胀厚度的测定 |
Particleboards and fibreboards; determination of swelling in thickness after immersion in water |
EN 318-2002 |
木基板 与相对湿度变化有关的尺寸变化的测定 |
Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
EN 319-1993 |
碎料板和纤维板 与板平面垂直的拉伸强度的测定 |
Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board |
EN 3196-1994 |
航空航天系列 FE-PA92HT(A286) 耐热钢镀银自锁六角螺母等级:1100MPa(环境温度) 425℃ |
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/425℃ |
EN 32-1998 |
壁挂式洗脸池 连接尺寸 |
Wall-hung wash basins - Connecting dimensions |
EN 320-1993 |
纤维板 抗螺钉轴向拔出力的测定 |
Fibreboards - Determination of resistance to axial withdrawal of screws |
EN 3202-1995 |
航空航天系列 T形头螺栓的孔和阱 设计标准 |
Aerospace series - Holes and traps for T-head bolts - Design standard |
EN 3207-1998 |
航空航天系列 橡胶化合物 技术规范 |
Aerospace series - Rubber compounds - Technical specification |
EN 321-2001 |
木基板 循环试验条件下抗潮湿性的测定 |
Wood-based panels - Determination of moisture resistance under cyclic test conditions |
EN 3212-1995 |
航空航天系列 油漆和清漆 在缓冲氯化纳溶剂中用更换浸渍试验测定耐蚀性 |
Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution |
EN 322-1993 |
木基板 含水量测定 |
Wood-based panels - Determination of moisture content |
EN 323-1993 |
木基板 密度测定 |
Wood-based panels - Determination of density |
EN 3230-2001 |
航空航天系列镀镉钢制标准对边矮的槽头/齿形头六角螺母 等级:900 MPa (环境温度)/235℃ |
Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
EN 3236-1998 |
航空航天系列镀银耐热镍基合金NI-P100HT(铬镍铁合金718) 薄壁自锁紧短内螺纹插件 |
Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread |
EN 3237-1998 |
航空航天系列镀银耐热镍基合金NI-P100HT(铬镍铁合金718) 薄壁自锁紧长内 螺纹插件 |
Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread |
EN 3239-1995 |
航空航天系列 镀银HI-P101HT耐热镍基合金自锁十二角螺母 等级:1210 MPa(环境温度)/730℃ |
Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/730℃ |
EN 324-1-1993 |
木基板 板尺寸测定 第1部分:厚度、宽度和长度测定 |
Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
EN 324-2-1993 |
木基板 板尺寸测定 第2部分:垂直度和边缘平直度测定 |
Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness |
EN 3243-2001 |
标准号: |
中文标题: |
EN 3244-2001 |
标准号: |
中文标题: |
EN 3245-2001 |
标准号: |
中文标题: |
EN 3246-2001 |
标准号: |
中文标题: |
EN 3247-2001 |
标准号: |
中文标题: |
EN 3248-2001 |
航空航天系列 钛合金管连接件8°30′带锁异径管端管接头 |
Aerospace series - Pipe coupling 8°30′in titanium alloy - Adaptors, reduced pipe end, with lockring |
EN 325-1993 |
木基板 试件尺寸测定 |
Wood-based panels - Determination of dimensions of test pieces |
EN 326-1-1994 |
木基板 取样、剪切和检验 第1部分:试样的取样和剪切及试验结果的表述 |
Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
EN 326-2-2000 |
木基板 取样、剪切和检验 第2部分:工厂中的质量控制 |
Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory |
EN 326-3-1998 |
木基板 取样、剪切和检验 第3部分:一批到货板的检验 |
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a consignment of panels |
EN 3264-2001 |
航空航天系列钛合金管连接件8°30′ 止推金属丝螺母 |
Aerospace series - Pipe coupling 8°30′ in titanium alloy - Thrust wire nut |
EN 3266-2001 |
航空航天系列 钛合金管连接 舱壁螺母 |
Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut |
EN 3267-2001 |
航空航天系列 垫圈钛合金 舱壁 |
Aerospace series - Washers, bulkhead in titanium alloy |
EN 3268-2001 |
标准号: |
中文标题: |
EN 3269-2001 |
标准号: |
中文标题: |
EN 327-2000 |
热交换器 强制对流空气制冷冷凝器 建立性能的试验程序 |
Heat exchangers - Forced convection air cooled refrigerant condensers - Test procedure for establishing performance |
EN 3272-2001 |
标准号: |
中文标题: |
EN 3273-2001 |
标准号: |
中文标题: |
EN 3274-2001 |
标准号: |
中文标题: |
EN 3275-2002 |
标准号: |
中文标题: |
EN 3280-1994 |
航空航天系列 飞机机架用刚性或自对中滚动轴承 技术规范 |
Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification |
EN 3280/prA1-2001 |
航空航天系列 飞机机架用刚性或自对中滚动轴承 技术规范 修改A1 |
Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification; Amendment A1 |
EN 3281-1994 |
航空航天系列 飞机机架滚动轴承 钢制硬质单列滚珠轴承 直径系列8和9 尺寸和荷载 |
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 8 and 9 - Dimensions and loads |
EN 3282-1994 |
航空航天系列 飞机机架滚动轴承 镀镉钢制硬质单列滚珠轴承 直径系列8和9 尺寸和荷载 |
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 8 and 9 - Dimensions and loads |
EN 3283-1994 |
航空航天系列 飞机机架滚动轴承 耐腐蚀钢制硬质单列滚珠轴承 直径系列8和9 尺寸和荷载 |
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9 - Dimensions and loads |
EN 3284-1994 |
航空航天系列 飞机机架滚动轴承 钢制硬质单列滚珠轴承直径系列0和2标准间隙种类尺寸和荷载 |
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads |
EN 3285-1994 |
航空航天系列飞机机架滚动轴承镀镉钢制硬质单列滚珠轴承直径系列0和2标准间隙种类尺寸和荷载 |
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads |
EN 3286-1994 |
航空航天系列飞机机架滚动轴承耐腐蚀钢制硬质单列滚珠轴承直径系列0和2标准间隙种类尺寸和荷载 |
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and loads |
EN 3287-1994 |
航空航天系列飞机机架滚动轴承钢制双排自对中滚珠轴承直径系列2尺寸和荷载 |
Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel - Diameter series 2 - Dimensions and loads |
EN 3288-1994 |
航空航天系列飞机机架滚动轴承镀镉钢制双排自对中滚珠轴承直径系列2尺寸和 荷载 |
Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in steel, cadmium plated - Diameter series 2 - Dimensions and loads |
EN 3289-1994 |
航空航天系列飞机机架滚动轴承耐腐蚀钢制双排自对中滚珠轴承直径系列2尺寸和荷载 |
Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2 - Dimensions and loads |
EN 3290-1994 |
航空航天系列飞机机架滚动轴承钢制单列自对中滚柱轴承直径系列3和4尺寸和荷载 |
Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Diameter series 3 and 4 - Dimensions and loads |
EN 3291-1994 |
航空航天系列飞机机架滚动轴承镀镉钢制单列自对中滚柱轴承直径系列3和4尺寸和荷载 |
Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Diameter series 3 and 4 - Dimensions and loads |
EN 3292-1994 |
航空航天系列飞机机架滚动轴承耐腐蚀钢制单列自对中滚柱轴承直径系列3和4尺寸和荷载 |
Aerospace series - Bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4 - Dimensions and loads |
EN 3297-1998 |
航空航天系列NI-P100HT(铬镍铁合金718)耐热镍基合金MJ螺纹薄壁自锁紧插件技术规范 |
Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification |
EN 3298-1998 |
航空航天系列薄壁自锁紧插件装配和拆卸程序 |
Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure |
EN 33-2003 |
带封闭耦合冲洗水箱的座式抽水马桶 连接尺寸 |
Pedestal W.C. pans with close-coupled flushing cistern - Connecting dimensions |
EN 330-1993 |
木材防腐剂 测定涂层下和地面露出接触用木材防腐剂的相对防护效果的现场试验方法:L连接法 |
Wood preservatives; field test method for determining the relative protective effectiveness of a wood preservative for use under a coating and exposed out of ground contact: L-joint method |
EN 3303-1997 |
航空航天系列镀镉合金钢六角凹头粗公差普通柄中等长度螺纹帽螺钉等级:1100MPa(环境温度)/235℃ |
Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
EN 3304-1996 |
标准号: |
中文标题: |
EN 3305-1996 |
航空航天系列镀镉合金钢短螺纹紧公差普通柄偏置十字凹槽100°埋头矮头螺钉等级:1100MPa(环境温度)/235 |
Aerospace series - Screws, 100°countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
EN 3306-1996 |
标准号: |
中文标题: |
EN 3307-1996 |
标准号: |
中文标题: |
EN 3308-1996 |
标准号: |
中文标题: |
EN 331-1998 |
建筑物燃气设备用人工操纵球阀和封闭底锥形旋塞阀 |
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
EN 335-1-1992 |
木材和衍生材料的耐久性 生物侵袭的危害分级的定义 第1部分:总则 |
Durability of wood and derived materials; definition of hazard classes of biological attack; part 1: general |
EN 335-2-1992 |
木材和衍生材料的耐久性 生物侵袭的危害分级的定义 第2部分:实心木材的应用 |
Durability of wood and wood-based products; definition of hazard classes of biological attack; part 2: application to solid wood |
EN 335-3-1995 |
木材和衍生材料的耐久性 生物侵袭的危害分级的定义 第3部分:木基板的应用 |
Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
EN 336-2003 |
结构木材 尺寸、允许偏差 |
Structural timber - Sizes, permitted deviations |
EN 3377-1996 |
航空航天系列FE-PA92TH(A286)耐热钢六角头自锁螺母等级:1100MPa(环境温度)/ 425℃ |
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/425℃ |
EN 3379-1996 |
航空航天系列合金NI-P101HT(Waspaloy 一种耐高温热镍基合金)耐热镍基中长螺纹紧公差柄双六角螺栓等级: |
Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730℃ |
EN 338-2003 |
结构木材 强度分级 |
Structural timber - Strength classes |
EN 3380-1996 |
航空航天系列扣套技术规范 |
Aerospace series - Rings, retaining - Technical specification |
EN 3381-1996 |
标准号: |
中文标题: |
EN 34-1992 |
带封闭耦合冲洗水箱的壁挂式抽水马桶 连接尺寸 |
Wall hung W.C. pan with close coupled cistern - Connecting dimensions |
EN 340-1993 |
防护服 一般要求 |
Protective clothing; General requirements |
EN 342-2004 |
防护服.防寒外套和防寒套装 |
|
EN 343-2003 |
防护服 防雨服 |
Protective clothing - Protection against rain |
EN 344-2-1996 |
专业应用的安全防护和职业鞋靴 第2部分:附加要求和试验方法 |
Safety, protective and occupational footwear for professional use - Part 2: Additional requirements and test methods |
EN 3446-1995 |
航空航天系列仪器及设备用耐蚀钢制不带凸缘的精密滚珠轴承尺寸和荷载 |
Aerospace series - Bearings, precision ball without flange in corrosion resisting steel, for instruments and equipment - Dimensions and loads |
EN 345-2-1996 |
专业应用的安全鞋靴 第2部分:附加规范 |
Safety footwear for professional use - Part 2: Additional specifications |
EN 346-2-1996 |
专业应用的保护鞋靴 第2部分:附加规范 |
Protective footwear for professional use - Part 2: Additional specifications |
EN 347-2-1996 |
专业应用的职业鞋靴 第2部分:附加规范 |
Occupational footwear for professional use - Part 2: Additional specifications |
EN 3475-100-2002 |
航空航天系列飞行器用的电缆试验方法第100部分:总则 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 100: General |
EN 3475-201-2002 |
航空航天系列飞行器用的电缆试验方法第201部分:可视检查/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 201: Visual examination / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-202-2002 |
航空航天系列飞行器用的电缆试验方法第202部分:质量/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 202: Mass / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-301-2002 |
航空航天系列飞行器用的电缆试验方法第301部分:每单位长度的欧母电阻/注:适合与EN 3475-100结合使 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 301: Ohmic resistance per unit length / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-302-2002 |
航空航天系列飞行器用的电缆试验方法第302部分:电压校检试验/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 302: Voltage proof test / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-303-2002 |
航空航天系列飞行器用的电缆试验方法第303部分:绝缘电阻/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 303: Insulation resistance / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-304-2002 |
航空航天系列飞行器用的电缆试验方法第304部分:表面电阻/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 304: Surface resistance / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-305-2002 |
航空航天系列飞行器用的电缆试验方法第305部分:过载电阻/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 305: Overload resistance / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-401-2002 |
航空航天系列飞行器用的电缆试验方法第401部分:加速老化/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 401: Accelerated ageing / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-402-2002 |
航空航天系列飞行器用的电缆试验方法第402部分:收缩和脱层/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 402: Shrinkage and delamination / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-403-2002 |
航空航天系列飞行器用的电缆试验方法第403部分:脱层和阻塞/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 403: Delamination and blocking / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-404-2002 |
航空航天系列飞行器用的电缆试验方法第404部分:热冲击/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 404: Thermal shock / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-405-2002 |
航空航天系列飞行器用的电缆试验方法第405部分:环境温度下的弯曲/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 405: Bending at ambient temperature / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-406-2002 |
航空航天系列飞行器用的电缆试验方法第406部分:冷弯试验/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 406: Cold bend test / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-407-2002 |
航空航天系列飞行器用的电缆试验方法第407部分:可燃性/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 407: Flammability / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-409-2002 |
航空航天系列飞行器用的电缆试验方法第409部分:真空老化/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 409: Air-excluded ageing / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-410-2002 |
航空航天系列飞行器用的电缆试验方法第410部分:耐热性/注:适合与EN 3475-100和 ASTM D 3032 (1986 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 410: Thermal endurance / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 14 |
EN 3475-412-2002 |
航空航天系列飞行器用的电缆试验方法第412部分:防潮性能 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 412: Humidity resistance |
EN 3475-413-2002 |
航空航天系列飞行器用的电缆试验方法第414部分:缠绕反向测试 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 413: Wrap back test |
EN 3475-501-2002 |
航空航天系列飞行器用的电缆试验方法第501部分:动态切口/注:适合与EN 3475-100和 ASTM D 3032 (19 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 501: Dynamic out-through / Note: Applies only in conjunction with EN 3475-100 and ASTM D 3032 (1986) paragraph 22 |
EN 3475-502-2002 |
航空航天系列飞行器用的电缆测试方法第502部分:切口扩散/注:适合与EN 3475-100 结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 502: Notch propagation / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-503-2002 |
航空航天系列飞行器用的电缆测试方法第503部分:擦伤磨损/注:适合与EN 3475-100 结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 503: Scrape abrasion / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-504-2002 |
航空航天系列飞行器用的电缆测试方法第504部分:扭转/注:适合与EN 3475-100 结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 504: Torsion / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-505-2002 |
航空航天系列飞行器用的电缆测试方法第505部分:导线和绞线的拉伸试验/注:适合与EN 3475-100结合使 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 505: Tensile test on conductors and strands / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-506-2002 |
航空航天系列飞行器用的电缆测试方法第506部分:电镀连续性/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 506: Plating continuity / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-507-2002 |
航空航天系列飞行器用的电缆测试方法第507部分:绝缘层与导体间的剥离性及粘附力/注:适合与EN 3475 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 507: Strippability and adherence of insulation to the conductor / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-508-2002 |
航空航天系列飞行器用的电缆测试方法第508部分:电镀厚度 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 508: Plating thickness |
EN 3475-509-2002 |
航空航天系列飞行器用的电缆测试方法第509部分:软焊性 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 509: Solderability |
EN 3475-510-2002 |
航空航天系列飞行器用的电缆测试方法第510部分:铠装和包皮材料、抗张强度和挤压绝缘层的伸张度 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material |
EN 3475-511-2002 |
航空航天系列飞行器用的电缆试验方法第511部分:电缆与电缆磨损 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion |
EN 3475-512-2002 |
航空航天系列飞行器用的电缆试验方法第512部分:耐弯曲性 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 512: Flexure endurance |
EN 3475-603-2002 |
航空航天系列飞行器用的电缆试验方法第603部分:抗湿弧轨迹性 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 603: Resistance to wet arc tracking |
EN 3475-604-2002 |
航空航天系列飞行器用的电缆试验方法第604部分:抗干弧扩展性 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 604: Resistance to dry arc propagation |
EN 3475-605-2002 |
航空航天系列飞行器用的电缆试验方法第605部分:湿短路试验 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 605: Wet short circuit test |
EN 3475-701-2002 |
航空航天系列飞行器用的电缆试验方法第701部分:绝缘层与导体间的剥离性和粘附力/注:适合与EN 3475 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 701: Strippability / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-702-2002 |
航空航天系列飞行器用的电缆试验方法第702部分:屏蔽抗冲击能力/注:适合与EN 3475-100结合使用 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 702: Screen pushback capability / Note: Applies only in conjunction with EN 3475-100 |
EN 3475-703-2002 |
航空航天系列飞行器用的电缆试验方法第703部分:制造商标记的持久性/注:适合与EN 3475-100结合使 |
Aerospace series - Cables, electrical, aircraft use; Test methods - Part 703: Permanence of manufacturers marking / Note: Applies only in conjunction with EN 3475-100 |