标准号 |
中文名称 |
英文名称 |
| DIN EN ISO 9241-4 Berichtigung 1-2002 |
DIN EN ISO 9241-4:1999 勘误 |
Corrigenda to DIN EN ISO 9241-4:1999; German version EN ISO 9241-4:1998/AC:2000 |
| DIN EN ISO 9241-4-1999 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第4部分:键盘要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 4: Keyboard requirements for visual display terminals (ISO 9241-4:1998); German version EN ISO 9241-4:1998 |
| DIN EN ISO 9241-5-1999 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第5部分:工作台布置及人体姿势的要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements (ISO 9241-5:1998); German version EN ISO 9241-5:1999 |
| DIN EN ISO 9241-6-2001 |
具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第6部分:工作环境导则 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999); German version EN ISO 9241-6:1999 |
| DIN EN ISO 9241-7-1998 |
带有可视显示终端(VDTs)的办公室工作的人类工效学要求.第7部分:显示及其相关的反射性要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 7: Requirements for display with reflections (ISO 9241-7:1998); German version EN ISO 9241-7:1998 |
| DIN EN ISO 9241-8-1998 |
用屏幕终端的办公室工作的人类工效学要求.第8部分:彩色显示的要求 |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 8: Requirements for displayed colours (ISO 9241-8:1997); German version EN ISO 9241-8:1997 |
| DIN EN ISO 9241-9-2002 |
用视觉显示终端办公的人类工效学要求.第9部分:非键盘输入设备要求(ISO 9241-9:2000) |
Ergonomic requirements for office work with visual display terminals (VDTs) - Part 9: Requirements for non-keyboard input devices (ISO 9241-9:2000); German version EN ISO 9241-9:2001 |
| DIN EN ISO 9251-1996 |
热绝缘.材料的热传导条件和性能.术语 |
Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987); German version EN ISO 9251:1995 |
| DIN EN ISO 9283-1999 |
操纵工业机器人.性能参数和相关试验方法 |
Manipulating industrial robots - Performance criteria and related test methods (ISO 9283:1998); German version EN ISO 9283:1998 |
| DIN EN ISO 9288-1996 |
热绝缘.散热传递.物理的量值和定义 |
Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989); German version EN ISO 9288:1996 |
| DIN EN ISO 9289-1995 |
油料种子残渣.游离残留乙烷测定 |
Oilseed residues - Determination of free residual hexane (ISO 9289:1991); German version EN ISO 9289:1995 |
| DIN EN ISO 9300-1995 |
用文杜利临界流量喷嘴测定气体流量 |
Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:1990); German version EN ISO 9300:1995 |
| DIN EN ISO 9300-2005 |
用文杜利临界流量喷嘴测量气体流量 |
|
| DIN EN ISO 9308-1-2001 |
水质.大肠杆菌和大肠杆菌类的检测与计数.第1部分:膜过滤法 |
Water quality - Detection and enumeration of Escherichia coli coliform bacteria - Part 1: Membrane filtration method (ISO 9308-1:2000); German version EN ISO 9308-1:2000 |
| DIN EN ISO 9308-3-1999 |
水质.表面水和废水中大肠杆菌和大肠杆菌类的验证和计数.第3部分:通过液体介质中接种的微型法 |
Water quality - Detection and enumeration of Escherichia coli and coliform bacteria in surface and waste water - Part 3: Miniaturized method (most probable number) by inoculation in liquid medium (ISO 9308-3:1998); German version EN ISO 9308-3:1998 |
| DIN EN ISO 9311-1-2005 |
热塑管道系统用胶粘剂.第1部分:胶粘膜特性的测定 |
|
| DIN EN ISO 9311-2-2002 |
热塑管道系统用的胶粘计.第2部分:剪切强度的测定 |
Adhesives for thermoplastic piping systems - Part 2: Determination of shear strength (ISO 9311-2:2002); German version EN ISO 9311-2:2002 |
| DIN EN ISO 9311-3-2005 |
热塑性管道系统用胶粘剂.第3部分:耐内压力性测定的试验方法 |
|
| DIN EN ISO 9311-3-2005 |
热塑性管道系统用胶粘剂.第3部分:耐内压力性测定的试验方法 |
|
| DIN EN ISO 9311-3-2005 |
热塑性管道系统用胶粘剂.第3部分:耐内压力性测定的试验方法 |
|
| DIN EN ISO 9312-1995 |
电阻焊设备.电极挡块的绝缘柱 |
Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:1990); German version EN ISO 9312:1994 |
| DIN EN ISO 9337-1-2000 |
接触镜片.后屈光度的测定.第1部分:使用聚焦仪的手工方法 |
Contact lenses - Determination of back vertex power - Part 1: Method using focimeter with manual focusing (ISO 9337-1:1999); German version EN ISO 9337-1:2000 |
| DIN EN ISO 9337-2-2004 |
接触镜片.后屈光度的测定.第2部分:在盐中浸渍的接触镜片的测量 |
|
| DIN EN ISO 9338-1998 |
光学和光学仪器.接触镜片.直径的测定 |
Optics and optical instruments - Contact lenses - Determination of the diameters (ISO 9338:1996); German version EN ISO 9338:1998 |
| DIN EN ISO 9339-1-1998 |
光学及光学仪器.接触镜片.厚度测定.第1部分:直接接触镜片 |
Optics and optical instruments - Contact lenses; Determination of the thickness - Part 1: Rigid contact lenses (ISO 9339-1:1996); German version EN ISO 9339-1:1998 |
| DIN EN ISO 9339-2-1998 |
光学和光学仪器.接触镜片.厚度测定.第2部分:水凝胶接触镜片 |
Optics and optical instruments - Contact lenses; determination of thickness - Part 2: Hydrogel contact lenses (ISO 9339-2:1998); German version EN ISO 9339-2:1998 |
| DIN EN ISO 9340-1998 |
光学及光学仪器.接触镜片.直接接触镜片的应力测定 |
Optics and optical instruments - Contact lenses - Determination of strains for rigid contact lenses (ISO 9340:1996); German version EN ISO 9340:1998 |
| DIN EN ISO 9341-1998 |
光学及光学仪器.接触镜片.形状稳定的接触镜片中杂质和表面缺陷的测定 |
Optics and optical instruments - Contact lenses - Determination of inclusions and surface imperfections for rigid contact lenses (ISO 9341:1996); German version EN ISO 9341:1998 |
| DIN EN ISO 9342-1998 |
光学和光学仪器.焦距计校正用检验透镜 |
Optics and optical instruments - Test lenses for calibration of focimeters (ISO 9342:1996); German version EN ISO 9342:1998 |
| DIN EN ISO 9346-1996 |
热绝缘.质量传递.物理量值和定义 |
Thermal insulation - Mass transfer - Physical quantities and definitions (ISO 9346:1987); German version EN ISO 9346:1996 |
| DIN EN ISO 9360-1-2000 |
麻醉和呼吸设备.人体中增湿呼吸气体用热与湿度交换器(HMEs).第1部分:250ml最小呼吸气容积的HMEs |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000); German version EN ISO 9360-1:2000 |
| DIN EN ISO 9360-2-2003 |
麻醉和呼吸设备.使人体呼吸气体增湿的热和潮气交换器(HMEs).第2部分:潮气量最小为250ml的气管造口病人用热和潮气交换器 |
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml (ISO 9360-2:2001); German version EN ISO 9360- |
| DIN EN ISO 9363-1-1999 |
光学和光学仪器.接触镜片.接触镜片材料致癌性的测定.第1部分:琼脂涂盖试验和生长抑制试验 |
Optics and optical instruments - Contact lenses; determination of cytotoxicity of contact lens material - Part 1: Agar overlay test and growth inhibition test (ISO 9363-1:1994); German version EN ISO 9363-1:1999 |
| DIN EN ISO 9377-2-2001 |
水质.油气指数的测定.第2部分:溶剂萃取法和气相色谱法 |
Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography (ISO 9377-2:2000); German version EN ISO 9377-2:2000 |
| DIN EN ISO 9391-1995 |
水质.宏无脊椎生物的深水取样.菌落使用导则 |
Water quality - Sampling in deep waters for macro-invertebrates - Guidance on the use of colonization, qualitative and quantitative samplers (ISO 9391:1993); German version EN ISO 9391:1995 |
| DIN EN ISO 9394-1998 |
眼科光学.接触镜片和接触镜片护理制品.通过兔眼视觉研究测定生物适合性 |
Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes (ISO 9394:1998); German version EN ISO 9394:1998 |
| DIN EN ISO 9396-2001 |
塑料.酚醛树脂.用自动装置测定在特别条件下甲阶酚醛树脂的胶凝时间 |
Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus (ISO 9396:1997); German version EN ISO 9396:2000 |
| DIN EN ISO 9397-1997 |
塑料.酚醛树脂.游离甲醛含量的测定 |
Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method (ISO 9397:1995); German version EN ISO 9397:1997 |
| DIN EN ISO 9397-1997 |
塑料.酚醛树脂.游离甲醛含量的测定 |
Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method (ISO 9397:1995); German version EN ISO 9397:1997 |
| DIN EN ISO 9397-1997 |
塑料.酚醛树脂.游离甲醛含量的测定 |
Plastics - Phenolic resins - Determination of free-formaldehyde content - Hydroxylamine hydrochloride method (ISO 9397:1995); German version EN ISO 9397:1997 |
| DIN EN ISO 9400-1995 |
镍基合金.抗晶间腐蚀性的测定 |
Nickel-based alloys - Determination of resistance to intergranular corrosion (ISO 9400:1990); German version EN ISO 9400:1995 |
| DIN EN ISO 9408-1999 |
水质.使用在封闭的呼吸测定计中需氧测定的方法评定有机化合物在水介质中的最大需氧生物降解能力 |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer (ISO 9408:1999); German version EN ISO 9408:1999 |
| DIN EN ISO 9409-1-1997 |
工业机器人.机械接口.第1部分:板(A型) |
Manipulating industrial robots - Mechanical interfaces - Part 1: Plates (form A) (ISO 9409-1:1996); German version EN ISO 9409-1:1996 |
| DIN EN ISO 9409-1-2004 |
操作型工业机器人.机械接口.第1部分:板 |
|
| DIN EN ISO 9409-2-1997 |
工业机器人.机械接口.第2部分:柄(A型) |
Manipulating industrial robots - Mechanical interfaces - Part 2: Shafts (form A) (ISO 9409-2:1996); German version EN ISO 9409-2:1996 |
| DIN EN ISO 9439-2000 |
水质.液体介质中有机化合物最大好气菌生物降解性的评价.二氧化碳评价试验 |
Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Carbon dioxide evolution test (ISO 9439:1999); German version EN ISO 9439:2000 |
| DIN EN ISO 945-1994 |
铸铁.石墨显微结构的表示方法 |
Cast iron - Designation of microstructure of graphite (ISO 945:1975); German version EN ISO 945:1994 |
| DIN EN ISO 9454-2-2000 |
软钎焊剂.分类和要求.第2部分:性能要求 |
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998); German version EN ISO 9454-2:2000 |
| DIN EN ISO 9455-10-2000 |
软钎焊剂.试验方法.第10部分:助熔剂功效试验.焊料展开法 |
Soft soldering fluxes - Test methods - Part 10: Flux efficacy tests, solder spread method (ISO 9455-10:1998); German version EN ISO 9455-10:2000 |
| DIN EN ISO 9455-12-1994 |
软钎剂.试验方法.第12部分:钢管腐蚀试验 |
Soft soldering fluxes - Test methods - Part 12: Steel tube corrosion test (ISO 9455-12:1992); German version EN ISO 9455-12:1994 |
| DIN EN ISO 9455-13-1999 |
软钎焊剂.检验方法.第13部分:焊剂飞溅量的测定 |
Soft soldering fluxes - Test methods - Part 13: Determination of flux spattering (ISO 9455-13:1996); German version EN ISO 9455-13:1999 |
| DIN EN ISO 9455-15-1999 |
软钎焊剂.检验方法.第15部分:铜腐蚀检验 |
Soft soldering fluxes - Test methods - Part 15: Copper corrosion test (ISO 9455-15:1996); German version EN ISO 9455-15:1999 |
| DIN EN ISO 9455-16-2001 |
软钎焊助熔剂.试验方法.第16部分:助熔剂功效试验.湿平衡法 |
Soft soldering fluxes - Test methods - Part 16: Flux efficacy tests, wetting balance method (ISO 9455-16:1998); German version EN ISO 9455-16:2001 |
| DIN EN ISO 9455-2-1995 |
软钎焊剂.试验方法.第2部分:不挥发物的测定.沸点计法 |
Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter, ebulliometric method (ISO 9455-2:1993); German version EN ISO 9455-2:1995 |
| DIN EN ISO 9455-3-1994 |
软钎焊剂.试验方法.第3部分:酸值测定.电势法和目测滴定法 |
Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:1992); German version EN ISO 9455-3:1994 |
| DIN EN ISO 9455-6-1997 |
软钎焊剂.试验方法.第6部分:卤化物含量的测定和验证(除了氟化物外) |
Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:1995); German version EN ISO 9455-6:1997 |
| DIN EN ISO 9455-9-1995 |
软钎焊剂.试验方法.第9部分:氨含量测定 |
Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content (ISO 9455-9:1993); German version EN ISO 9455-9:1995 |
| DIN EN ISO 9456-1996 |
光学和光学仪器.眼科光学.眼镜架标志 |
Optics and optical instruments - Ophthalmic optics - Marking of spectacle frames (ISO 9456:1991); German version EN ISO 9456:1996 |
| DIN EN ISO 9488-2001 |
太阳能.词汇 |
Solar energy - Vocabulary (ISO 9488:1999); Trilingual version EN ISO 9488:1999 |
| DIN EN ISO 9509-1995 |
水质.通过化学药品和污水对活性污泥中微生物硝酸化抑制作用的鉴定方法 |
Water quality - Method for assessing the inhibition of nitrification of activated sludge micro-organisms by chemicals and waste water (ISO 9509:1989); German version EN ISO 9509:1995 |
| DIN EN ISO 9513 Bb.1-2003 |
金属材料.单轴向试验用伸长仪的校正.机械伸长仪的样品及其校正 |
Metallic materials - Calibration of extensometers used in uniaxial testing - Examples for mechanical extensometers and their calibration |
| DIN EN ISO 9513 Bb.2-2005 |
金属材料.单轴向试验用伸长计的校准.激光伸长计系统及其校准 |
|
| DIN EN ISO 9513 Bb.2-2005 |
金属材料.单轴向试验用伸长计的校准.激光伸长计系统及其校准 |
|
| DIN EN ISO 9513 Bb.3-2005 |
金属材料.单轴向试验用伸长计的校准.视频伸长计系统及其校准 |
|
| DIN EN ISO 9513 Bb.3-2005 |
金属材料.单轴向试验用伸长计的校准.视频伸长计系统及其校准 |
|
| DIN EN ISO 9513-2003 |
金属材料.单轴向试验用伸长仪的校正 |
Metallic materials - Calibration of extensometers used in uniaxial testing (ISO 9513:1999); German version EN ISO 9513:2002 |
| DIN EN ISO 9514-1994 |
色漆和清漆.液态适用期测定.样品的制备和状态调节以及试验指南 |
Paints and varnishes - Determination of the pot-life of liquid systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:1992); German version EN ISO 9514:1994 |
| DIN EN ISO 9514-2005 |
色漆和清漆.多组分涂覆系统适用期测定.样品的制备和处理以及试验指南 |
|
| DIN EN ISO 9554-2005 |
纤维绳索.一般规范 |
|
| DIN EN ISO 9554-2005 |
纤维绳索.一般规范 |
|
| DIN EN ISO 9556-2002 |
钢铁.含碳总量的测定.感应电炉燃烧红外线吸收法 |
Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989); German version EN ISO 9556:2001 |
| DIN EN ISO 9562-2005 |
水质.可吸附卤素(AOX)的测定 |
|
| DIN EN ISO 960-1998 |
塑料.聚酰胺(PA).含水量测定 |
Plastics - Polyamides (PA) - Determination of water content (ISO 960:1988); German version EN ISO 960:1997 |
| DIN EN ISO 9606-3-1999 |
焊工考试.熔焊.第3部分:铜和铜合金 |
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999); German version EN ISO 9606-3:1999 |
| DIN EN ISO 9606-4-1999 |
焊工合格检验.熔焊.第4部分:镍和镍合金 |
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9696-4:1999); German version EN ISO 9606-4:1999 |
| DIN EN ISO 9606-5-2000 |
焊工考试.熔焊.第5部分:钛和钛合金、锆和锆合金 |
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000); German version EN ISO 9606-5:2000 |
| DIN EN ISO 9614-1-1995 |
声学.利用声音强度测定噪声源功率级.第1部分:离散点测量 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993); German version EN ISO 9614-1:1995 |
| DIN EN ISO 9614-2-1996 |
声学.利用声音强度测定噪声源功率级.第2部分:扫描测量法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996); German version EN ISO 9614-2:1996 |
| DIN EN ISO 9614-3-2003 |
声学.利用声音强度测定噪声源声功率级.第3部分:扫描测量精度法 |
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002); German version EN ISO 9614-3:2002 |
| DIN EN ISO 9626-2002 |
医疗器械制造用不锈钢针状管材 |
Stainless steel needle tubing for manufacture of medical devices (ISO 9626:1991 + AMD 1:2001) (including amendment A1:2001); German version EN ISO 9626:1995 + A1:2001 |
| DIN EN ISO 9653-2000 |
胶粘剂.粘合剂的剪切冲击强度的试验方法 |
Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998); German version EN ISO 9653:2000 |
| DIN EN ISO 9664-1995 |
粘合剂.拉伸剪切结构胶粘剂疲劳性能的试验方法 |
Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993); German version EN ISO 9664:1995 |
| DIN EN ISO 9665-2000 |
粘合剂.动物胶.取样和试验方法 |
Adhesives - Animal glues - Methods for sampling and testing (ISO 9665:1998); German version EN ISO 9665:2000 |
| DIN EN ISO 9680-1996 |
牙科设备.牙科手术灯 |
Dental equipment - Dental operating light (ISO 9680:1993, including Technical Corrigendum 1:1995); German version EN ISO 9680:1996 |
| DIN EN ISO 9687-1995 |
牙科设备.图形符号 |
Dental equipment - Graphical symbols (ISO 9687:1993); German version EN ISO 9687:1995 |
| DIN EN ISO 9692-1-2004 |
焊接和相关工艺.接口准备的建议.第1部分:钢的手工金属弧焊接、气体保护金属弧焊接、气焊、TIG焊接和缝焊 |
|
| DIN EN ISO 9692-2-1999 |
焊接和相关工艺.接头的预处理.第2部分:钢的埋弧焊 |
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998, includes Corrigendum AC:1999); German version EN ISO 9692-2:1998 + AC:1999 |
| DIN EN ISO 9692-3-2001 |
焊接和相关工艺.焊缝准备的推荐方法.第3部分:铝和铝合金的金属极惰性气体保护焊和钨极惰性气体保护焊 |
Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding und tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2001); German version EN ISO 9692-3:2001 |
| DIN EN ISO 9693-2000 |
牙科陶瓷与金属修补材料的熔合 |
Dental ceramic fused to metal restorative materials (ISO 9693:1999); German version EN ISO 9693:2000 |
| DIN EN ISO 9694-1999 |
牙科用磷酸酯粘结铸造包埋材料 |
Dental phosphate-bonded casting investments (ISO 9694:1996); German version EN ISO 9694:1998 |
| DIN EN ISO 9702-1998 |
塑料.环氧氨硬化剂.对第1,2,3氨组含氮量的测定 |
Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content (ISO 9702:1996); German version EN ISO 9702:1998 |
| DIN EN ISO 9703-3-1998 |
麻醉和人工呼吸用警报信号.第3部分:警报使用指南 |
Anaesthesia and respiratory care alarm signals - Part 3: Guidance on application of alarms (ISO 9703-3:1998); German version EN ISO 9703-3:1998 |
| DIN EN ISO 9707-1995 |
信息和文献.图书、报纸、期刊和电子出版物的生产和销售的统计方法 |
Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications (ISO 9707:1991); German version EN ISO 9707:1994 |
| DIN EN ISO 9713-2004 |
神经外科植入物.自锁颅内动脉瘤夹钳 |
|
| DIN EN ISO 9771-1997 |
塑料.酚醛树.测定可溶酚醛树在酸性条件下的反应性 |
Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995); German version EN ISO 9771:1997 |
| DIN EN ISO 9773-1998 |
塑料.立式软薄试样与小火焰源接触燃烧性能的测定 |
Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998); German version EN ISO 9773:1998 |
| DIN EN ISO 9773-2004 |
塑料.立式软薄试样与小火焰源接触的燃烧性能测定 |
(Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003) |
| DIN EN ISO 9773-2004 |
塑料.立式软薄试样与小火焰源接触的燃烧性能测定 |
|
| DIN EN ISO 9785-2002 |
船舶和海上技术.装有内燃机驱动装置的货舱的通风.气流总需量的理论计算 |
Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required (ISO 9785:2002); German version EN ISO 9785:2002 |
| DIN EN ISO 9787-2000 |
操纵工业机器人.坐标系和运动 |
Manipulating industrial robots - Coordinate systems and motion nomenclatures (ISO 9787:1999); German version EN ISO 9787:1999 |
| DIN EN ISO 9801-1999 |
眼科仪器.测试箱镜头 |
Ophthalmic instruments - Trial case lenses (ISO 9801:1997); German version EN ISO 9801:1999 |
| DIN EN ISO 9831-2004 |
动物饲料、动物产品和粪便或尿液.总热值的测定.弹式量热计法 |
(Animal feeding stuffs, animal products, and faeces or urine - Determination of gross calorific value - Bomb calorimeter method (ISO 9831:1998); German version EN ISO 9831:2003) |
| DIN EN ISO 9831-2004 |
动物饲料、动物产品和粪便或尿液.总热值的测定.弹式量热计法 |
|
| DIN EN ISO 9832-2000 |
动植物脂肪和油.残留技术上的己烷含量测定 |
Animal and vegetable fats and oils - Determination of residual technical hexane content (ISO 9832:1992, including Amendment 1:1998); German version EN ISO 9832:2000 |
| DIN EN ISO 9856-1995 |
输送带.弹性模数的测定 |
Conveyor belts - Determination of elastic modulus (ISO 9856:1989); German version EN ISO 9856:1995 |
| DIN EN ISO 9856-2004 |
输送带.弹性和固定伸长度的测定及弹性模量的计算 |
|
| DIN EN ISO 9862-2005 |
土工合成织物.试样的取样和制备 |
|
| DIN EN ISO 9862-2005 |
土工合成织物.试样的取样和制备 |
|
| DIN EN ISO 9863-1-2005 |
土工合成织物.特定压力下厚度的测定.第1部分:单层 |
|
| DIN EN ISO 9863-1-2005 |
土工合成织物.特定压力下厚度的测定.第1部分:单层 |
|
| DIN EN ISO 9863-2-1996 |
土工织物和相关产品.特定压力下厚度的测定.第2部分:多层制品的单层厚度测定方法 |
Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products (ISO 9863-2:1996); German version EN ISO 9863-2:1996 |
| DIN EN ISO 9864-2005 |
土工合成织物.土工织物和相关产品每单位面积质量测定的试验方法 |
|
| DIN EN ISO 9864-2005 |
土工合成织物.土工织物和相关产品每单位面积质量测定的试验方法 |
|
| DIN EN ISO 9873 Berichtigung 1-2001 |
DIN EN ISO 9873:2000-07的勘误 |
Corrigenda to DIN EN ISO 9873:2000-07 (EN ISO 9873:2000/AC:2000) |
| DIN EN ISO 9873-2000 |
可重复使用的金属牙科镜和牙钻手柄 |
Dental hand instruments - Reusable mirrors and handles (ISO 9873:1998); German version EN ISO 9873:2000 |
| DIN EN ISO 9875-2002 |
船舶和航海技术.航海用回声设备 |
Ships and marine technology - Marine echo-sounding equipment (ISO 9875:2000); German version EN ISO 9875:2001 |
| DIN EN ISO 9876-1999 |
船舶和航海技术.气象图用航海传真接收机 |
Ships and marine technology - Marine facsimile receivers for meteorological charts (ISO 9876:1997); German version EN ISO 9876:1998 |
| DIN EN ISO 9886-2002 |
用生理测量法评定热应变 |
Evaluation of thermal strain by physiological measurements (ISO 9886:1992); German version EN ISO 9886:2001 |
| DIN EN ISO 9886-2004 |
人类工效学.热疲劳的生理学测量评价 |
|
| DIN EN ISO 9887-1994 |
水质.含水介质中有机物化合物需氧生物降解性的评定.半连续激活污泥法(SCAS) |
Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS) (ISO 9887:1992); German version EN ISO 9887:1994 |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com