标准号 |
中文名称 |
英文名称 |
| DIN EN 13032-1-2004 |
灯和照明.灯和灯具光度数据的测量和表示.第1部分:测量和文件格式 |
|
| DIN EN 13034-2005 |
液态化学物质防护服装.提供有限的液态化学物质防护性能的化学防护服的性能要求(6型和PB[6]型设备) |
|
| DIN EN 13035-3-2004 |
平板玻璃的制造、处理和加工用机械和工厂.安全要求.第3部分:切割机械 |
|
| DIN EN 13035-4-2004 |
平板玻璃的制造、处理和加工用机械和设备.安全要求.第4部分:倾斜台 |
|
| DIN EN 13036-1-2001 |
道路和飞机场.表面特征.试验方法.第1部分:使用体积修补技术测量道路表面大的结构深度 |
(Road and airfieldsurface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique; German version EN 13036-1:2001) |
| DIN EN 13036-3-2003 |
道路和机场表面特征.试验方法.第3部分:路面表层水平排水性能的测量 |
(Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability; German version EN 13036-3:2002) |
| DIN EN 13037-2000 |
土壤改进剂和生长剂.pH值的测定 |
(Soil improvers and growing media - Determination of pH; German version EN 13037:1999) |
| DIN EN 13038-2000 |
土壤改进剂和生长剂.电导性的测定 |
(Soil improvers and growing media - Determination of electrical conductivity; German version EN 13038:1999) |
| DIN EN 13039-2000 |
土壤改进剂和生长剂.有机物含量和灰分的测定 |
(Soil improvers and growing media - Determination of organic matter content and ash; German version EN 13039:1999) |
| DIN EN 1304-2000 |
搭接铺设用粘土屋顶瓦.产品的定义和规范(包括修改件A1:1999) |
(Clay roofing tiles for discontinuous laying - Product definitions and specifications (includes amendment A1:1999); German version EN 1304:1998 + A1:1999) |
| DIN EN 1304-2005 |
粘土屋顶瓦及其配件.产品定义和规范 |
|
| DIN EN 13040-2000 |
生长基质和土壤改良剂.物理试验和化学试验的样品准备.实验室压缩体密度和水分含量,干物质含量的测定 |
(Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density; German version EN 13040:1999) |
| DIN EN 13041-2000 |
土壤改进剂和生长剂.物理特性的测定.毛体积干密度、空气量、水量、收缩值和总孔容 |
(Soil improvers and growing media - Determination of physical properties - Dry bulk density, air volume, water volume, shrinkage value and total pore space; German version EN 13041:1999) |
| DIN EN 13042-2-2004 |
空心玻璃的生产、处理和加工用机械和设备.安全要求.第2部分:送料搬运设备 |
|
| DIN EN 13042-5-2004 |
空心玻璃的生产、处理和加工用机械和设备.安全要求.第5部分:压力机 |
|
| DIN EN 13043 Berichtigung 1-2004 |
对DIN EN 13043-2002的勘误 |
|
| DIN EN 13043-2002 |
沥青混合物用集料以及道路、飞机场和其他交通区域表面处理 |
(Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas; German version EN 13043:2002) |
| DIN EN 13044-2000 |
交易机构.编码、识别和标记 |
(Swap bodies - Coding, identification and marking; German version EN 13044:2000) |
| DIN EN 13045-2000 |
包装.圆柱形塑料软管.尺寸和公差 |
(Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; German version EN 13045:2000) |
| DIN EN 13046-2000 |
包装.圆柱形金属软管.尺寸和公差 |
(Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances; German version EN 13046:2000) |
| DIN EN 13047-2000 |
包装.圆锥形金属软管.尺寸和公差 |
(Packaging - Flexible conical metallic tubes - Dimensions and tolerances; German version EN 13047:2000) |
| DIN EN 13048-2000 |
包装.铝软管.内部清漆薄膜厚度测量方法 |
(Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method; German version EN 13048:2000) |
| DIN EN 13049-2003 |
窗.软和重体冲击.试验方法、安全要求和分类 |
(Windows - Soft and heavy body impact - Test method, safety requirements and classification; German version EN 13049:2003) |
| DIN EN 1305-1996 |
内河航运船只.油残渣排放用连接件 |
(Inland navigation vessels - Connections for the discharge of oily mixture; German version EN 1305:1996) |
| DIN EN 130500-1999 |
分规范.直流电压用塑料薄膜MKC电容器 |
(Sectional specification - Fixed metallized polycarbonate film dielectric capacitors for direct current; German version EN 130500:1998) |
| DIN EN 130501-1999 |
空白详细规范.直流电压用塑料薄膜MKC电容器.质量评定等级E |
(Blank detail specification - Fixed metallized polycarbonate film dielectric capacitors for direct current - Assessment level E; German version EN 130501:1998) |
| DIN EN 130502-1999 |
空白详细规范.直流电压用塑料薄膜MKC电容器.质量评定等级EZ |
(Blank detail specification - Fixed metallized polycarbonate film dielectric capacitors for direct current - Assessment level EZ; German version EN 130502:1998) |
| DIN EN 13051-2001 |
幕墙.防水性.位点试验 |
(Curtain walling - Watertightness - Site test; German version EN 13051:2001) |
| DIN EN 13052-1-2001 |
有机物质对人类生活用水的影响.有机物质.管道系统中水的颜色和浊度的测定.第1部分:试验方法 |
(Influence of organic materials on water intended for human consumption - Organic materials; Determination of colour and turbidity of water in piping systems - Part 1: Test method; German version EN 13052-1:2001) |
| DIN EN 13053 Berichtigung 1-2003 |
对DINEN13053:2002-04的勘误 |
(Corrigenda to DIN EN 13053:2002-04; German version EN 13053:2001/AC:2002) |
| DIN EN 13053-2002 |
建筑物通风.空气调节装置.装置、部件和零件的额定值与性能 |
(Ventilation for buildings - Air handling units - Rating and performance for units, components and sections; German version EN 13053:2001) |
| DIN EN 13054-2001 |
包装.完全和满运输包装件.包装件重心测定的试验方法 |
(Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package; German version EN 13054:2001) |
| DIN EN 13055-1 Berichtigung 1-2004 |
对DIN EN 13055-1-2002的勘误 |
|
| DIN EN 13055-1-2002 |
轻集料.第1部分:混凝土、灰浆和水泥浆用轻集料 |
(Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout; German version EN 13055-1:2002) |
| DIN EN 13055-2-2004 |
轻集料.第2部分:沥青混合料和表面处理用轻集料以及非粘结和粘结用轻集料 |
|
| DIN EN 13056-2000 |
内河运输船.30度到小于45度倾斜角楼梯.要求和类型 |
(Inland navigation vessels - Stairs with inclination angles of 30 to45 - Requirements, types; German version EN 13056:2000) |
| DIN EN 13057-2002 |
混凝土构件的修补和保护用产品和系统.试验方法.抗毛细管吸收性的测定 |
(Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption; German version EN 13057:2002) |
| DIN EN 13059-2002 |
工业用卡车的安全性.测量振动的试验方法 |
(Safety of industrial trucks - Test methods for measuring vibration; German version EN 13059:2002) |
| DIN EN 1306-1996 |
内河航运船只.污水排放用连接件 |
(Inland navigation vessels - Connections for the discharge of waste water; German version EN 1306:1996) |
| DIN EN 13060-2004 |
小型蒸汽灭菌器 |
|
| DIN EN 13061-2002 |
防护服装.相关足球运动员用护胫.要求与试验方法 |
(Protective clothing - Shin guards for association football players - Requirements and test methods; German version EN 13061:2001) |
| DIN EN 13062-2003 |
混凝土结构的保护和修补用品和系统.试验方法.增强材料保护用产品的触变性测定 |
(Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement; German version EN 13062:2003) |
| DIN EN 13063-2-2005 |
烟囱.带粘土和陶瓷烟道衬的系统烟筒.第2部分：潮湿条件下的要求和试验方法.德文版本 EN 13063-2-2005 |
|
| DIN EN 13067-2003 |
塑料焊接人员.焊工的资格检验.热塑焊接组件 |
(Plastics welding personnel - Approval testing of welders - Thermoplastics welded assemblies; German version EN 13067:2003) |
| DIN EN 13068-1-2000 |
无损试验.射线检查试验.第1部分:成像特性定量测量 |
(Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties; German version EN 13068-1:1999) |
| DIN EN 13068-2-2000 |
无损试验.射线检查试验.第2部分:成像装置长期稳定性检查 |
(Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices; German version EN 13068-2:1999) |
| DIN EN 13068-3-2001 |
无损试验.射线检查试验.第2部分:χ和γ射线对金属材料进行射线检查试验的一般原理 |
(Non-destructive testing - Radioscopic testing - Part 3: General principles for the radioscopic testing of metallic materials by X- and gamma rays; German version EN 13068-3:2001) |
| DIN EN 13069-2005 |
烟囱.系统烟囱用粘土/陶瓷外壁.要求和试验方法；德文版本 EN 13069-2005 |
|
| DIN EN 1307-1997 |
织物地板铺面.绒头地毯分级 |
(Textile floor coverings - Classification of pile carpets; German version EN 1307:1997) |
| DIN EN 1307-2005 |
铺地织物.绒头地毯分级 |
|
| DIN EN 13071-2002 |
废弃物分类收集容器.选择废物收集用容积为80l-5000l的地面机械提升容器 |
(Selective waste collection containers - Above-ground mechanically-lifted containers with capacities for 80 l to 5000 l for selective collection of waste; German version EN 13071:2002) |
| DIN EN 13073-2001 |
鞋靴.整鞋的试验方法.耐水性 |
(Footwear - Test methods for whole shoe - Water resistance; German version EN 13073:2001) |
| DIN EN 13074-2002 |
沥青和沥青粘合剂.用蒸发法从沥青乳胶中回收粘合剂 |
(Bitumen and bituminous binders - Recovery of binder from bitumen emulsions by evaporation; German version EN 13074:2001) |
| DIN EN 13075-1-2002 |
沥青和沥青粘合剂.断裂特性的测定.第1部分:阳离子沥青乳液断裂值的测定.矿物填料法 |
(Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bitumen emulsions, mineral filler method; German version EN 13075-1:2002) |
| DIN EN 13075-2-2002 |
沥青和沥青粘合剂.断裂特性的测定.第2部分:阳离子沥青乳液精细混合时间的测定 |
(Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bitumen emulsions; German version EN 13075-2:2002) |
| DIN EN 13076-2003 |
防饮用水回流造成污染的设备.无限制的气隙.A类、A型和AA型气隙 |
(Devices to prevent pollution by backflow of potable water - Unrestricted air gap - Family A, type A, type AA air gaps; German version EN 13076:2003) |
| DIN EN 13076-2004 |
防饮用水回流污染装置.无限制的气隙.A类、A型 |
|
| DIN EN 13077-2004 |
防饮用水回流污染装置.无循环溢流(无限制)的气隙.A类B型 |
|
| DIN EN 13078-2004 |
防饮用水回流污染装置.带浸没式给水装有空气进口和溢流口的气隙.A类C型 |
|
| DIN EN 1308-1999 |
瓷砖和地板用灰浆和胶粘剂.滑流测定 |
(Adhesives for tiles - Determination of slip (includes Amendment A1:1998); German version EN 1308:1996 + A1:1998) |
| DIN EN 13080-2003 |
农用机械.施肥机.环保.要求和试验方法 |
(Agricultural machinery - Manure spreaders; Environmental protection - Requirements and test methods; German version EN 13080:2002) |
| DIN EN 130800-2004 |
分规范:钽表面安装电容器 |
(Sectional Specification: Tantalum surface mounting capacitors; German version EN 130800:2000 + A1:2003) |
| DIN EN 130800-2004 |
分规范:钽表面安装电容器 |
|
| DIN EN 130801-2002 |
钽表面安装电容器的空白详细规范 |
(Blank detail specification: Tantalum surface mounting capacitors; German version EN 130801:2002) |
| DIN EN 13081-2001 |
危险货物运输罐.罐的配套设备.蒸汽收集适配耦合器 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor coupler; German version EN 13081:2001) |
| DIN EN 13082-2001 |
危险货物运输罐.罐的配套设备.蒸汽转移阀门 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve; German version EN 13082:2001) |
| DIN EN 13083-2001 |
危险货物运输罐.罐的配套设备.底部装卸的适配器 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading; German version EN 13083:2001) |
| DIN EN 13084-1-2001 |
独立式工业烟囱.第1部分:一般要求 |
(Free-standing industrial chimneys - Part 1: General requirements; German version EN 13084-1:2000) |
| DIN EN 13084-2-2002 |
独立式工业烟囱.第2部分:混凝土烟囱 |
(Free-standing chimneys - Part 2: Concrete chimneys; German version EN 13084-2:2001) |
| DIN EN 13084-4-2003 |
独立式烟囱.第4部分:砖衬.设计和施工 |
(Free-standing chimneys - Part 4: Brick liners; Design and execution; German version EN 13084-4:2002) |
| DIN EN 13084-4-2005 |
独立式烟囱.第4部分:砖衬.设计和施工 |
|
| DIN EN 13084-5-2005 |
独立式烟囱.第5部分:砖衬垫材料.产品规范.德文版本 EN 13084-5-2005 |
|
| DIN EN 13085-2001 |
墙面饰层.软木辊子规范.德文版本EN13085-2001 |
(Wallcoverings - Specifications for cork rolls; German version EN 13085:2001) |
| DIN EN 13086-2000 |
铅及铅合金.氧化铅 |
(Lead and lead alloys - Lead oxides; German version EN 13086:2000) |
| DIN EN 13087-1 Berichtigung 1-2002 |
DINEN13087-1:2000-06的勘误 |
(Corrigenda to DIN EN 13087-1:2000-06; German version EN 13087-1:2000/A1:2001) |
| DIN EN 13087-1-2000 |
防护头盔.试验方法.第1部分:条件和调整 |
(Protective helmets - Test methods - Part 1: Conditions and conditioning; German version EN 13087-1:2000) |
| DIN EN 13087-10-2001 |
防护头盔.试验方法.第10部分:耐辐射热 |
(Protective helmets - Test methods - Part 10: Resistance to radiant heat; German version EN 13087-10:2000) |
| DIN EN 13087-2 Berichtigung 1-2002 |
DINEN13087-2:2000-06的勘误 |
(Corrigenda to DIN EN 13087-2:2000-06; German version EN 13087-2:2000/A1:2001) |
| DIN EN 13087-2-2000 |
防护头盔.试验方法.第2部分:减震 |
(Protective helmets - Test methods - Part 2: Shock absorption; German version EN 13087-2:2000) |
| DIN EN 13087-3 Berichtigung 1-2002 |
DINEN13087-3:2000-06的勘误 |
(Corrigenda to DIN EN 13087-3:2000-06; German version EN 13087-3:2000/A1:2001) |
| DIN EN 13087-3-2000 |
防护头盔.试验方法.第3部分:抗渗透性 |
(Protective helmets - Test methods - Part 3: Resistance to penetration; German version EN 13087-3:2000) |
| DIN EN 13087-4-2001 |
防护头盔.试验方法.第4部分:保持系统的效用 |
(Protective helmets - Test methods - Part 4: Retention system effectiveness; German version EN 13087-4:2000) |
| DIN EN 13087-5-2000 |
防护头盔.试验方法.第5部分:保持系统的强度 |
(Protective helmets - Test methods - Part 5: Retention system strength; German version EN 13087-5:2000) |
| DIN EN 13087-6 Berichtigung 1-2002 |
DINEN13087-6:2000-06的勘误 |
(Corrigenda to DIN EN 13087-6:2000-06; German version EN 13087-6:2000/A1:2001) |
| DIN EN 13087-6-2000 |
防护头盔.试验方法.第6部分:视觉范围 |
(Protective helmets - Test methods - Part 6: Field of vision; German version EN 13087-6:2000) |
| DIN EN 13087-7 Berichtigung 1-2002 |
DINEN13087-7:2000-09的勘误 |
(Corrigenda to DIN EN 13087-7:2000-9; German version EN 13087-7:2000/A1:2001) |
| DIN EN 13087-7-2000 |
防护头盔.试验方法.第7部分:耐火性 |
(Protective helmets - Test methods - Part 7: Flame resistance; German version EN 13087-7:2000) |
| DIN EN 13087-8-2001 |
防护头盔.试验方法.第8部分:电性能 |
(Protective helmets - Test methods - Part 8: Electrical properties; German version EN 13087-8:2000) |
| DIN EN 13088-2001 |
填充羽毛和绒毛的物品.测定填充产品的总重量和填充物重量的方法 |
(Manufactured articles filled with feather and down - Method for the determination of a filled product`s total mass and for the determination of the mass of the filling; German version EN 13088:2001) |
| DIN EN 13089-1999 |
登山设备.登冰器具.安全技术要求和检验方法 |
(Mountaineering equipment - Ice-tools - Safety requirements and test methods; German version EN 13089:1999) |
| DIN EN 1309-1-1997 |
圆木和锯木.尺寸测量方法.第1部分:锯木 |
(Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber; German version EN 1309-1:1997) |
| DIN EN 13090-2001 |
建筑物燃气管道工程的螺纹接头再密封的方法 |
(Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000) |
| DIN EN 130900-1998 |
分规范.固定式聚苯乙烯薄膜绝缘的金属箔直流电容器 |
(Sectional specification - Fixed polystyrene film dielectric metal foil d.c. capacitors; German version EN 130900:1997) |
| DIN EN 130901-1998 |
空白详细规范.固定式聚苯乙烯薄膜绝缘的金属箔直流电容器.评定级E |
(Blank detail specification - Fixed polystyrene film dielectric metal foil d.c. capacitors - Assessment level E; German version EN 130901:1997) |
| DIN EN 130902-1998 |
空白详细规范.固定式聚苯乙烯薄膜绝缘的金属箔直流电容器.评定级EZ |
(Blank detail specification - Fixed polystyrene film dielectric metal foil d.c. capacitors - Assessment level EZ; German version EN 130902:1997) |
| DIN EN 13091-2000 |
生物技术.过滤件和过滤组件的性能标准 |
(Biotechnology - Performance criteria for filter elements and filtration assemblies; German version EN 13091:1999) |
| DIN EN 13092-2000 |
生物技术.设备.抽样和接种法指南 |
(Biotechnology - Equipment - Guidance on sampling and inoculation procedures; German version EN 13092:1999) |
| DIN EN 13094-2004 |
危险货物运输用容器.工作压力不超过0.5巴的金属容器.设计和建造 |
|
| DIN EN 13095-2000 |
生物技术.排气系统性能标准 |
(Biotechnology - Performance criteria for off-gas systems; German version EN 13095:1999) |
| DIN EN 13096-2004 |
可运输储气瓶.填充气体到容器内的条件.单组分气体 |
|
| DIN EN 13098-2001 |
工作场所的空气.空气中微生物和内毒素的测定导则 |
(Workplace atmospheres - Guidelines for measurement of airborne microorganisms and endotoxin; German version EN 13098:2000) |
| DIN EN 13099-2004 |
可运输储气瓶.填充气体混合物到容器内的条件 |
|
| DIN EN 131-1-1993 |
梯子.名称、型式、功能尺寸 |
(Ladders; terms, types, functional sizes; German version EN 131-1:1993) |
| DIN EN 131-2-1993 |
梯子.要求、检验、标识 |
(Ladders; requirements, testing, marking; German version EN 131-2:1993) |
| DIN EN 1310-1997 |
圆木和锯木.特性测定法 |
(Round and sawn timber - Method of measurement of features; German version EN 1310:1997) |
| DIN EN 13100-1-2000 |
热塑性半成品焊接接头的无损检验.第1部分:外观检验 |
(Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination; German version EN 13100-1:1999) |
| DIN EN 13100-2-2005 |
热塑性半成品焊接接头的无损检验.第2部分:X射线照相检验 |
|
| DIN EN 13100-3-2005 |
热塑性半成品焊接接头的无损检验.第3部分:超声检验 |
|
| DIN EN 13101-2003 |
地下人入口处阶梯.要求、标记、试验和合格评定 |
(Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity; German version EN 13101:2002) |
| DIN EN 13103 Berichtigung 1-2003 |
DINEN13103-2002的技术勘误 |
(Corrigenda to DIN EN 13103:2002-02) |
| DIN EN 13103-2002 |
铁路设施.轮副和行车机构.非动力轴.设计方法 |
(Railway applications - Wheelsets and bogies - Non-powered axles; Design method; German version EN 13103:2001) |
| DIN EN 13104 Berichtigung 1-2003 |
DINEN13104-2002的技术勘误 |
(Corrigenda to DIN EN 13104:2002-02) |
| DIN EN 13104-2002 |
铁路设施.轮副和行车机构.动力轴.设计方法 |
(Railway applications - Wheelsets and bogies - Powered axles; Design method; German version EN 13104:2001) |
| DIN EN 13107-2005 |
载人用索道装置的安全要求.土木工程建筑 |
|
| DIN EN 13109-2003 |
液化石油气罐.处置 |
(LPG tanks - Disposal; German version EN 13109:2002) |
| DIN EN 1311-1997 |
圆木和锯木.病虫害侵袭测定法 |
(Round and sawn timber - Method of measurement of biological degrade; German version EN 1311:1997) |
| DIN EN 13110-2003 |
液化石油气用(LPG)可运输可填充焊接铝瓶.设计和结构 |
(Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction; German version EN 13110:2002) |
| DIN EN 13111-2001 |
防水用软板.非连续式屋顶和墙壁用衬垫.防水渗透性的测定 |
(Flexible sheets for waterproofing - Underlays for discontinuous roofing and wals - Determination of resistance to water penetration; German version EN 13111:2001) |
| DIN EN 13112-2003 |
制革机.片皮机和带式刀剪切机的安全要求 |
(Tannery machines - Splitting and bandknife shearing machines - Safety requirements; German version EN 13112:2002) |
| DIN EN 13113-2003 |
制革机.胶滚涂层机的安全要求 |
(Tannery machines - Roller coating machines - Safety requirements; German version EN 13113:2002) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com