标准号 |
中文名称 |
英文名称 |
| DIN EN 28662-1-1993 |
便携式手提动力工具.手柄振动测量.通则 |
(Hand-held portable power tools; measurement of vibrations at the handle; part 1: general (ISO 8662-1:1988); german version EN 28662-1:1992) |
| DIN EN 28662-100-2002 |
便携式手提动力工具.手柄振动测量.第100部分:第2部分、第3部分和第5部分的修改件 |
(Hand-held portable power tools - Measurement of vibrations at the handle - Part 100: Amendments to Part 2, Part 3 and Part 5 (EN 28662-2/A2:2001, EN 28662-3/A2:2001 und EN 28662-5/A2:2001)) |
| DIN EN 28662-5-1995 |
便携式手提动力工具.手工振动测量.第5部分:建筑工程用铺设断路器和锤子. |
(Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work pick hammers (ISO 8662-5:1992); German version EN 28662-5:1994 + A1:1995) |
| DIN EN 28692-1993 |
水质.用绿藻类栅薄属的subspicatus和月牙藻属的capricornutum做淡水藻生长抑制试验 |
(Water quality; fresh water algal growth inhibition test with Scenedesmus subspicatus and Selenastrum capricornutum (ISO 8692:1989); German version EN 28692:1993) |
| DIN EN 287-1-1997 |
焊接试验.熔焊.第1部分:钢(含更改A1:1997) |
(Approval testing of welders - Fusion welding - Part 1: Steels (includes Amendment A1:1997); German version EN 287-1:1992 + A1:1997) |
| DIN EN 287-1-2004 |
焊工的资格鉴定试验.熔焊.第1部分:钢 |
|
| DIN EN 287-2-1997 |
焊接试验.熔焊.第2部分:铝和铝合金 |
(Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (includes Amendment A1:1997); German version EN 287-2:1992 + A1:1997) |
| DIN EN 2870-1996 |
航空和航天.钛合金制阳极化MoS2润滑十二角紧配合螺丝.等级1100MPa(室温下)/315℃ |
(Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; German version EN 2870:1996) |
| DIN EN 28736-1992 |
未淬火的带内螺纹的锥销 |
(Taper pins with internal thread, unhardened (ISO 8736:1986); german version EN 28736:1992) |
| DIN EN 28737-1992 |
未淬火的带外螺纹的锥销 |
(Taper pins with external thread, unhardened (ISO 8737:1986); german version EN 28737:1992) |
| DIN EN 28738-1992 |
螺栓用垫圈.产品等级A |
(Plain washers for clevis pins; product grade (ISO 8738:1986); german version EN 28738:1992) |
| DIN EN 2874-1996 |
航空和航天.钝化耐高温镍基合金中长螺纹十二角紧配合螺丝.等级1550MPa(室温下)/315℃ |
(Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 C; German version EN 2874:1996) |
| DIN EN 28749-1992 |
销子和带槽销,剪切试验 |
(Pins and grooved pins; shear test (ISO 8749:1986); german version EN 28749:1992) |
| DIN EN 28768-1993 |
包装.满装的运输包装.倒塌试验 |
(Packaging; complete, filled transport packages; toppling test (ISO 8768:1986); german version EN 28768:1992) |
| DIN EN 288-1-1997 |
金属材料焊接方法的要求和鉴定.第1部分:熔焊的一般规则 |
(Specification and approval of welding procedures for metallic materials - Part 1: General rules for fusion welding (including Amendment A1:1997); German version EN 288-1:1992 + A1:1997) |
| DIN EN 288-2-1997 |
金属材料焊接方法的要求和鉴定.第2部分:电弧焊的焊接规程 |
(Specification and approval of welding procedures for metallic materials - Part 2: Welding procedure specification for arc welding (includes Amendment A1:1997); German version EN 288-2:1992 + A1:1997) |
| DIN EN 288-3-1997 |
金属材料焊接方法的要求和鉴定.第3部分:钢材电弧焊的焊接方法检验 |
(Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steel (includes Amendment A1:1997); German version EN 288-3:1992 + A1:1997) |
| DIN EN 288-4-1997 |
金属材料焊接方法的要求鉴定.第4部分:铝和铝合金电弧焊接方法检验 |
(Specification and approval of welding procedures for metallic materials - Part 4: Welding procedure tests for the arc welding of aluminium and its alloys (includes Amendment A1:1997); German version EN 288-4:1992 + A1:1997) |
| DIN EN 288-5-1994 |
金属材料焊接方法的要求鉴定.第5部分:通过使用经认可的电弧焊焊接填料作鉴定 |
(Specification and approval of welding procedures for metallic materials - Part 5: Approval by using approved welding consumables for arc welding; German version EN 288-5:1994) |
| DIN EN 288-6-1994 |
金属材料焊接方法的要求鉴定.第6部分:根据现有的经验作鉴定 |
(Specification and approval of welding procedures for metallic materials - Part 6: Approval related to previous experience; German version EN 288-6:1994) |
| DIN EN 288-7-1995 |
金属材料焊接方法的要求鉴定.第7部分:电弧焊一般焊接方法认定 |
(Specification and approval of welding procedures for metallic materials - Part 7: Approval by a standard welding procedure for arc welding; German version EN 288-7:1995) |
| DIN EN 288-8-1995 |
金属材料焊接方法的要求鉴定.第8部分:通过生产前焊接检验作鉴定 |
(Specification and approval of welding procedures for metallic materials - Part 8: Approval by a pre-production welding test; German version EN 288-8:1995) |
| DIN EN 288-9-1999 |
金属材料焊接方法的要求和鉴定.第9部分:陆地和近海供料管道的现场焊接对接接缝的焊接方法检验 |
(Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines; German version EN 288-9:1999) |
| DIN EN 28806-4-1994 |
信息技术.图解数据加工.三维空间图的图解核心系统的语言连接.第4部分:C语言 |
(Information technology - Computer graphics - Graphical kernel system for three dimensions (GKS-3D) language bindings - Part 4: C (ISO/IEC 8806-4:1991); German version EN 28806-4:1993) |
| DIN EN 28839-1991 |
紧固件的机械性能.有色金属螺钉和螺母(ISO8839-86) |
(Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991) |
| DIN EN 2884-1996 |
航空和航天.用MoS2润滑,阳极化,钛合金制,短螺纹,带翼型十字槽的平头螺钉.等级:1100MPa(室温下)/315℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS lubricated, classification: 1100 MPa (at ambient temperature)/315 C; German version EN 2884:1996) |
| DIN EN 28846 Berichtigung 1-2001 |
DINEN28846-1993的勘误 |
(Corrigendum to DIN EN 28846:1993 (German version EN 28846:1993/A1:2000)) |
| DIN EN 28846-1993 |
游艇.电气装置.对周围可燃气体的引燃防护 |
(Small craft; electrical devices; protection against ignition of surrounding flammable gases (ISO 8846:1990); German version EN 28846:1993) |
| DIN EN 28848 Berichtigung 1-2001 |
DINEN28848:1993的勘误 |
(Corrigendum to DIN EN 28848:1993 (German version EN 28848:1993/A1:2000)) |
| DIN EN 28848-1993 |
游艇.控制设备 |
(Small craft; remote steering systems (ISO 8848:1990); German version EN 28848:1993) |
| DIN EN 28849 Berichtigung 1-2001 |
DINEN28849-1993的技术勘误 |
(Corrigendum to DIN EN 28849:1993; German version EN 28849:1993/A1:2000) |
| DIN EN 28849-1993 |
游艇.电动舱底泵 |
(Small craft; electrically operated bilge-pumps (ISO 8849:1990); German version EN 28849:1993) |
| DIN EN 2885-1996 |
航空和航天.镀镉,合金钢制,短螺纹,带翼型十字槽的平头螺钉.等级:900MPa(室温下)/235℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 C; German version EN 2885:1996) |
| DIN EN 2886-1996 |
航空和航天.镀铬合金钢制短螺纹带翼形十字槽的平头紧配合螺丝.等级:900MPa/235℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa/235 C; German version EN 2886:1996) |
| DIN EN 28860-1-1991 |
数据处理.用改进的调频制.以双面7958ftpred.每面80磁道的记录方式.在90mm(3.5in)的软磁盘存储器上进行数据 |
(Information processing; data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, on 80 tracks on each side; part 1: dimensional, physical and magnetic characteristics (ISO 8860-1:1987); ger |
| DIN EN 28860-2-1991 |
数据处理.用改进的调频制.以双面7958ftpred.每面80磁道的记录方式.在90mm(3.5in)的软磁盘存储器上进行数据 |
(Information processing; data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, on 80 tracks on each side; part 2: track format (ISO 8860-2:1987); german version EN 28860-2:1989) |
| DIN EN 2887-1995 |
航空和航天.钝化耐蚀钢制螺纹接近顶部的六角螺钉.等级:600MPa(室温下)/425℃ |
(Aerospace series - bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 C; German version EN 2887:1995) |
| DIN EN 28877-1993 |
信息技术.系统间电子通信和信息交换基准点S和T的ISDN基本存取接口用插接器和接点分配 |
(Information technology; telecommunications and information exchange between systems; interface connector and contact assignment for ISDN basic access interface located at reference points S and T (ISO/IEC 8877:1992); English version EN 28877:1993) |
| DIN EN 28879-1991 |
信息处理.文本处理和文本通信.通用标准识别语言(SGML)(ISO8879:1986+A1:1988) |
(Information processing; text and office systems; standard generalized markup language (SGML) (ISO 8879:1986 + A1:1988) EN 28879:1990) |
| DIN EN 2888-1995 |
航空和航天.钝化耐蚀钢制短螺纹六角螺钉.等级:600MPa(室温下)/425℃ |
(Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 C; German version EN 2888:1995) |
| DIN EN 2889-1995 |
航空和航天.镀镉合金钢制短螺纹六角螺钉.等级:900MPa(室温下)/235℃ |
(Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 C; German version EN 2889:1995) |
| DIN EN 289-1994 |
橡胶和塑料加工机械.模压机和喷压机.设计的安全技术要求 |
(Rubber and plastics machinery; compression and transfer moulding presses; safety requirements for the design; German version EN 289:1993) |
| DIN EN 289-2004 |
橡胶和塑料加工机械.压力机.安全要求 |
|
| DIN EN 28960-1993 |
家用和类似用途冰箱.冷藏柜和冷冻柜.空气噪声辐射检验 |
(Refrigerators, frozen food storage cabinets and food freezers for household and similar use; measurement of emission of airborne acoustical noise (ISO 8960:1991); German version EN 28960:1993) |
| DIN EN 2897-1996 |
航空和航空.镀铬合金钢制短螺纹带翼形十字槽的平头紧配合螺丝.等级:1100MPa/235℃ |
(Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa/235 C; German version EN 2897:1996) |
| DIN EN 28970-1991 |
木结构建筑.用机械紧固件连接的检验.对木材粗密度的要求(ISO8970-88) |
(Timber structures; testing of joints made with mechanical fasteners; requirements for wood density (ISO 8970:1989); german version EN 28970:1991) |
| DIN EN 28996-1993 |
人机工效学.代谢热量的测定 |
(Ergonomics; determination of metabolic heat production (ISO 8996:1990); German version EN 28996:1993) |
| DIN EN 29008-1994 |
玻璃瓶.垂直度.试验方法 |
(Glass bottles; verticality; test method (ISO 9008:1991); German version EN 29008:1994) |
| DIN EN 29009-1994 |
玻璃容器.以容器底作基准的瓶口高度和不平行性.试验方法 |
(Glass containers; height and non-parallelism of finish with reference to container base; test methods (ISO 9009:1991); German version EN 29009:1994) |
| DIN EN 29046-1991 |
高层建筑.接缝密封材料.常温下粘附性能和拉伸性能的测定(ISO9046:1987) |
(Building construction; jointing products; determination of adhesion/cohesion properties at constant temperature (ISO 9046:1987); german version EN 29046:1990) |
| DIN EN 29048-1991 |
高层建筑.接缝密封材料.用符合标准的仪器测定密封材料的可加工性(ISO9048:1987) |
(Building construction; jointing products; determination of extrudability of sealants using standardized apparatus (ISO 9048:1987); german version EN 29048:1990) |
| DIN EN 29052-1-1992 |
声学.动态劲度的测定.第1部分:住宅中浮式地板下面用的材料 |
(Acoustics; determination of dynamic stiffness; part 1: materials used under floating floors in dwellings; german version EN 29052-1:1991) |
| DIN EN 29053-1993 |
声学.声学应用材料.空气流动阻力的测定 |
(Acoustics; materials for acoustical applications; determination of airflow resistance (ISO 9053:1991); German version EN 29053:1993) |
| DIN EN 2906-1994 |
航空和航天.耐高温钢FE-PA92HT(A286)制自锁十二角螺母.等级:1100MPa(室温)650摄氏度 |
(Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2906:1994) |
| DIN EN 2907-1995 |
航空和航天.镀银FE-PA92HT(A286)耐高热钢自锁十二角螺母.等级:1100MPa(室温下)/650℃ |
(Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2907:1995) |
| DIN EN 29070-1993 |
信息技术.SGML.支持设备.公共电文主标识符定位过程 |
(Information processing; SGML support facilities; registration procedures for public text owner identifiers (ISO/IEC 9070:1991); english version EN 29070:1992) |
| DIN EN 29073-1-1992 |
纺织品.非织物的检验方法.第1部分:单位面积的质量测定 |
(Textiles; test method for nonwovens; part 1: determination of mass per unit area (ISO 9073-1:1989); german version EN 29073-1:1992) |
| DIN EN 29073-3-1992 |
纺织品.非织物的检验方法.第3部分:最大拉强度和最大拉伸力延伸度的测定 |
(Textiles; test method for nonwovens; part 3: determination of tensile strength and elongation (ISO 9073-3:1989); german version EN 29073-3:1992) |
| DIN EN 2908-1994 |
航空和航天.耐高温钢FE-PA92HT(A286)制圆柱形划孔自锁十二角螺母.等级:1100MPa(室温)650摄氏度 |
(Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2908:1994) |
| DIN EN 2909-1995 |
航空和航天.自锁带圆柱划孔FE-PA92HT(A286)高温钢制镀银十二角螺母.等级:1100MPa/650℃ |
(Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2909:1995) |
| DIN EN 29092-1992 |
纺织品.非织造物.概念 |
(Textiles; nonwowens; definition (ISO 9092:1988); german version EN 29092:1992) |
| DIN EN 2910-1994 |
航空和航天.耐高温钢FE-PA92HT(A286)制自锁铆接螺母.等级:1100MPa(室温)650摄氏度 |
(Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286) - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2910:1994) |
| DIN EN 29104-1993 |
封闭管道内液体流量测量.液体电磁流量计特性评定法 |
(Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991); German version EN 29104:1993) |
| DIN EN 2911-1995 |
航空和航天.自锁FE-PA92HT(A286)型镀银的铆接螺母.等级:1100MPa/650℃ |
(Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 C; German version EN 2911:1995) |
| DIN EN 29117-1992 |
清漆和涂料.干透状态和干透时间的测定.检验方法 |
(Paints and varnishes; determination of through-dry state and through-dry time (ISO 9117:1990); german version EN 29117:1992) |
| DIN EN 2912-1996 |
航空和航天.铝合金制阳极化或铬酸钝化的大外径平垫圈 |
(Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated; German version EN 2912:1996) |
| DIN EN 2913-2000 |
航空和航天系列.扁形大外径镀镉钢垫圈 |
(Aerospace series - Washers, flat, large diameter, in steel, cadmium plated; German version EN 2913:1999) |
| DIN EN 2914-1996 |
航空和航天.耐高温钢制钝化的大外径平垫圈 |
(Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated; German version EN 2914:1996) |
| DIN EN 29142-1993 |
胶粘剂.胶粘连接试验用标准实验室老化条件的选择导则 |
(Adhesives; guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:1990); German version EN 29142:1993) |
| DIN EN 29168-1994 |
手持式牙科器件.软管连接件 |
(Dental handpieces - Hose connectors (ISO 9168:1991); German version EN 29168:1994) |
| DIN EN 29171-1-1993 |
信息技术.信息交换用130mm只写一次光盘存储器.第1部分:空白光盘 |
(Information technology; 130 mm optical disk cartridge, write once, for information interchange; part 1: unrecorded optical disk cartridge (ISO/IEC 9171-1:1990); English version EN 29171-1:1993) |
| DIN EN 29171-2-1993 |
信息技术.信息交换用130mm只写一次光盘存储器.第2部分:记录格式 |
(Information technology; 130 mm optical disk cartridge, write once, for information interchange; part 2: recording format (ISO/IEC 9171-2:1990); English version EN 29171-2:1993) |
| DIN EN 292-1-1991 |
机器的安全性.基本概念.一般设计原则.第1部分:基本术语.方法 |
(Safety of machinery; basic concepts, general principles for design; part 1: basic terminology, methodology) |
| DIN EN 292-2-1995 |
机器的安全性.基本概念.一般设计原则.第2部分:技术原则和规范 |
(Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles and specifications; German version EN 292-2:1991 + A1:1995) |
| DIN EN 29202-1993 |
珠宝.贵金属合金的钝度 |
(Jewellery; fineness of precious metal alloys (ISO 9202:1991); german version EN 29202:1992) |
| DIN EN 29241-2-1993 |
具有可视显示终端的办公室工作的人类工效学要求.第2部分;任务要求指南 |
(Ergonomic requirements for office work with visual display terminals (VDTs); part 2: guidance on task requirements (ISO 9241-2:1992); German version EN 29241-2:1993) |
| DIN EN 29241-3-1993 |
具有屏幕显示终端的办公用人机工程学要求.第3部分:显示要求 |
(Ergonomic requirements for office work with visual display terminals (VDTs); part 3: visual display requirements (ISO 9241-3:1992); German version EN 29241-3:1993) |
| DIN EN 29241-3/A1-2002 |
具有可视显示终端的办公室工作的人类工效学要求.第3部分:可视显示要求.修改件A1 |
(Ergonomic requirements for office work with visual display terminals (VDTs) - Part 3: Visual display requirements; Amendment A1 (ISO 9241-3:1992/AMD 1:2000); German version EN 29241-3:1993/A1:2000) |
| DIN EN 2925-1994 |
航空和航天.耐高温钢FE-PA92HT(A286)制长螺纹扁柄十二角螺丝.等级:900MPa(室温)650度 |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2925:1994) |
| DIN EN 2926-1996 |
航空和航天.耐高温钢FE-FA92HT(A286)制镀银长螺纹细螺杆十二角螺丝钉.等级:900Mpa(室温外)/650℃ |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2926:1996) |
| DIN EN 2927-1996 |
航空和航天.耐高温镍基合金NI-P100HT(因康镍718)制长螺纹细螺杆十二角螺丝钉.等级:1275Mpa(室温外)/650℃ |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 C; German version EN 2927:1996) |
| DIN EN 2928-1996 |
航空和航天.耐高温镍基合金NI-P100HT(因康镍718)制镀银长螺纹细螺杆十二角螺丝钉.等级:1275Mpa(环境温度)/6 |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 C; German version EN 2928:1996) |
| DIN EN 2929-1996 |
航空和航天.耐高温镍基合金NI-P100HT(因康镍718)制长螺纹细螺杆十二角螺丝钉.等级:1210Mpa(室温外)/730℃ |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 C; German version EN 2929:1996) |
| DIN EN 29293-1991 |
数据处理.软磁盘上用于信息交换的标记和文件格式(ISO9293-87) |
(Information processing; volume and file structure of flexible disk cartridges for information interchange (ISO 9293:1987); german version EN 29293:1989) |
| DIN EN 29295-1991 |
声学.办公机械及信息技术设备高频率噪声的测量(ISO9295-89) |
(Acoustics; measurement of high-frequency noise emitted by computer and business equipment (ISO 9295:1989); german version EN 29295:1991) |
| DIN EN 293-1992 |
油压喷雾器喷嘴.最低要求.检验 |
(Oil pressure atomizing nozzles; minimum requirements, testing; german version EN 293:1992) |
| DIN EN 2930-1996 |
航空和航天.耐高温镍基合金NI-P101HT(Waspaloy一种耐高温热镍基合金)制镀银长螺纹细螺杆十二角螺丝钉.等级: |
(Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperatur)/730 C; German version EN 2930:1996) |
| DIN EN 2931-1994 |
航空和航天.耐高温钢FE-PA92HT(A286)制长螺纹扁柄T型头螺丝.等级:900MPa(室温)650摄氏度 |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2931:1994) |
| DIN EN 29313-1992 |
点焊设备.冷却管 |
(Resistance spot welding equipment; cooling tubes (ISO 9313:1989); german version EN 29313:1992) |
| DIN EN 29314-1-1993 |
信息处理系统.光纤分布数据接口(FDDI).第1部分:物理层协议(PHY) |
(Information processing systems; fibre distributed date interface (FDDI); part 1: token ring physical layer protocol (PHY) (ISO 9314-1:1989); English version EN 29314-1:1993) |
| DIN EN 29314-2-1993 |
信息处理系统.光纤排列数据的接口(FDDI).第2部分:令牌环媒存取控制方法 |
(Information processing systems; fibre distributed date interface (FDDI); part 2: token ring media access control (MAC) (ISO 9314-2:1989); English version EN 29314-2-1993) |
| DIN EN 29315-1993 |
信息处理系统.软驱和它的控制器之间的接口 |
(Information processing systems - Interface between flexible disk cartridge drives and their host controllers (ISO 9315:1989); English version EN 29315:1992) |
| DIN EN 29318-2-1993 |
信息技术.智能外圈接口.第2部分:磁盘驱动器专用指令集 |
(Information technology - Intelligent peripheral interface - Part 2: device specific command set for magnetic disk drives (ISO/IEC 9318-2:1990); English version EN 29318-2:1993) |
| DIN EN 29318-3-1993 |
信息技术.智能外围接口.第3部分:磁盘驱动器总指令集 |
(Information technology - Intelligent peripheral interface - Part 3: device generic command set for magnetic and optical disk drives (ISO/IEC 9318-3:1990); English version EN 29318-3:1993) |
| DIN EN 29318-4-1993 |
信息技术.智能外围接口.第4部分:磁带驱动器的指令集 |
(Information technology; intelligent peripheral interface; part 4: device generic command set for magnetic tape drives (ISO/IEC 9318-4:1990); English version EN 29318-4:1993) |
| DIN EN 2932-1996 |
航空和航天.耐高温钢FE-PA92HT(A286)制镀银长螺纹细螺杆T字头螺丝钉.等级:900Mpa(室温外)/650℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2932:1996) |
| DIN EN 2933-1996 |
航空和航天.耐高温镍基合金HI-P100HT(因康镍718)制长螺纹,细杆,T字头螺栓.等级:1275MPa(室温下)/650℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 C; German version EN 2933:1996) |
| DIN EN 29333-1992 |
镶牙材料 |
(Dental brazing materials (ISO 9333:1990); german version EN 29333:1991) |
| DIN EN 2934-1996 |
航空和航天.耐高温镍基合金HI-P100HT(因康镍718)制长螺纹,细杆,镀银,T字头螺栓.等级:1275MPa(室温下)/650℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 C; German version EN 2934:1996) |
| DIN EN 2935-1996 |
航空和航天.耐高温镍基合金HI-P101HT(沃斯帕落伊合金)制长螺纹,细杆,T字头螺栓.等级:1210MPa(室温下)/730℃ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 C; German version EN 2935:1996) |
| DIN EN 2936-1996 |
航空和航天.耐高温镍基合金HI-P101HT(沃斯帕落伊合金)制长螺纹,细杆,镀银,T字头螺栓.等级:1210MPa(室温下)/ |
(Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification 1210 MPa (at ambient temperature)/730 C; German version EN 2936:1996) |
| DIN EN 29367-1-1994 |
滚装船上汽车捆绑和固定装置.一般要求.第1部分:商业用车和车辆组合,半挂车除外 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded (ISO 9367-1:1989); German version EN 29367-1:1993) |
| DIN EN 29367-2-1995 |
滚装船上汽车捆绑和固定装置.一般要求.第2部分:半挂车 |
(Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 2: Semi-trailers (ISO 9367-2:1994); German version EN 29367-2:1994) |
| DIN EN 2937-1994 |
航空和航天.耐高温钢FE-PA92HT(A286)制全螺纹六角头螺丝.等级:900MPa(室温)650摄氏度 |
(Aerospace series - Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2937:1994) |
| DIN EN 2938-1995 |
航空和航天.镀银FE-PA92HT(A286)耐高温钢制螺纹到底部的六角螺钉.等级:900MPa(室温下)/650℃ |
(Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2938:1995) |
| DIN EN 2939-1994 |
航空和航天.耐高温钢FE-PA92HT(A286)制全螺纹翼型十字槽100度沉头螺丝.等级:900MPa(室温)650摄氏度 |
(Aerospace series - Screws, 100 countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2939:1994) |
| DIN EN 294-1992 |
机器的安全性.防止上肢触及危险位置的安全距离 |
(Safety of machinery; safety distances to prevent danger zones from being reached by the upper limbs; german version EN 294:1992) |
| DIN EN 2940-1995 |
航空和航天.镀银FE-PA92HT(A286)耐高热钢制螺纹到顶部翼形十字槽100度沉头螺钉.等级:900MPa(室温下)/650℃ |
(Aerospace series - Screws, 100 countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 C; German version EN 2940:1995) |
| DIN EN 2942-1998 |
航空和航天.镀银,自锁,耐高温镍基合金NI-PH2801(因康X750)制金属丝螺纹插件 |
(Aerospace series - Insert, screw thread, helical coil, self-locking, in head resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated; German version EN 2942:1998) |
| DIN EN 2943-1998 |
航空和航天.自锁绕线螺纹插件.交货技术条件 |
(Aerospace series - Inserts, screw thread, helical coil, self-locking - Technical specification; German version EN 2943:1998) |
| DIN EN 2944-1998 |
航空和航天.自锁,耐蚀钢FE-PA3004制金属丝螺纹插件 |
(Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting alloy FE-PA3004; German version EN 2944:1998) |
| DIN EN 2945-1998 |
航空和航天.自锁金属丝螺纹插件.安装方法 |
(Aerospace series - Inserts, screw thread, helical coil, self-locking - Assembly procedure; German version EN 2945:1998) |
| DIN EN 29454-1-1994 |
软焊剂.分类和要求.第1部分:分类、加标签和包装 |
(Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging (ISO 9454-1:1990); German version EN 29454-1:1993) |
| DIN EN 29455-1-1994 |
软钎剂.试验方法.第1部分:不挥发性物质的测定.重量分析法 |
(Soft soldering fluxes; test methods; part 1: determination of non-volatile matter, gravimetric method (ISO 9455-1:1990); German version EN 29455-1:1993) |
| DIN EN 29455-11-1994 |
软钎焊剂.试验方法.第11部分:钎焊剂残留物的可溶性 |
(Soft soldering fluxes; test methods; part 11: solubility of flux residues (ISO 9455-11:1991); German version EN 29455-11:1993) |
| DIN EN 29455-14-1994 |
软钎焊剂.试验方法.第14部分:钎焊剂残留物胶粘度测定 |
(Soft soldering fluxes; test methods; part 14: assessment of tackiness of flux residues (ISO 9455-14:1991); German version EN 29455-14:1993) |
| DIN EN 29455-5-1994 |
软钎焊剂.试验方法.第5部分:铜镜试验 |
(Soft soldering fluxes; test methods; part 5: copper mirror test (ISO 9455-5:1992); German version EN 29455-5:1993) |
| DIN EN 29455-8-1994 |
软钎焊剂.试验方法.第8部分:锌含量测定 |
(Soft soldering fluxes; test methods; part 8: determination of zinc content (ISO 9455-8:1991); German version EN 29455-8:1993) |
| DIN EN 2948-1996 |
航空和航天.钝化耐高温钢制有耳锁紧垫圈 |
(Aerospace series - Washers, tab, in heat resisting steel, passivated; German version EN 2948:1996) |
| DIN EN 2949-1996 |
航空和航天.钝化耐蚀钢制锁紧垫圈 |
(Aerospace series - Washers, wire locking, in corrosion resisting steel - passivated; German version EN 2949:1996) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com