标准号 |
中文名称 |
英文名称 |
| EN 1515-1-1999 |
法兰和其连接件 螺栓连接 第1部分：螺栓连接的选择 |
Flanges and their joints - Bolting - Part 1: Selection of bolting |
| EN 1515-2-2001 |
法兰和其连接件 螺栓连接 第2部分：PN钢法兰用螺栓材料的分类 |
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
| EN 1516-1999 |
体育场所地面 耐压痕能力的测定 |
Surfaces for sports areas - Determination of resistance to indentation |
| EN 1517-1999 |
体育场所地面 耐冲击性的测定 |
Surfaces for sports areas - Determination of resistance to impact |
| EN 1518-1998 |
无损检验 漏泄试验 质谱漏泄探测器特性 |
Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors |
| EN 1519-1-1999 |
建筑物结构内污物和废水排放(低和高温)用塑料管道系统 聚乙烯(PE) 第1部分：管材、管件和系统规范 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| EN 152-1-1988 |
木材防腐剂试验方法 确定服务中抗蓝污点防腐剂处理的预防效果的实验室方法 第1部分：清洁法 |
Test methods for wood preservatives; Laboratory method for determining the preventive effectiveness of a preservative treatment against blue stain in service; Part 1 : Brushing procedure |
| EN 152-2-1988 |
木材防腐剂试验方法 确定服务中抗蓝污点防腐剂处理的预防效果的实验室方法 第2部分：清洁法以外方法的应 |
Test methods for wood preservatives; Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service; Part 2 : Application by methods other than brushing |
| EN 1521-1996 |
露天建筑物的轻集料混凝土的挠曲强度的测定 |
Determination of flexural strength of lightweight aggregate concrete with open structure |
| EN 1522-1998 |
窗、门、百页窗和遮帘 抗弹性 要求和分类 |
Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification |
| EN 1523-1998 |
窗、门、百页窗和遮帘 抗弹性 试验方法 |
Windows, doors, shutters and blinds - Bullet resistance - Test method |
| EN 1525-1997 |
工业用货车的安全 无驾驶员货车及其系统 |
Safety of industrial trucks - Driverless trucks and their systems |
| EN 1526-1997 |
工业货车的安全 货车自动功能的附加要求 |
Safety of industrial trucks - Additional requirements for automated functions on trucks |
| EN 1527-1998 |
建筑五金器具 滑动门和折叠门用五金器具 要求和试验方法 |
Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods |
| EN 1528-1-1996 |
油脂食品 农药和多氯联苯(PCBs)的测定 第1部分：总则 |
Fatty food - Determination of pesticides and polychlorinated biphenyls (PCBs) - Part 1: General considerations |
| EN 1528-2-1996 |
油脂食品 农药和多氯联苯(PCBs)的测定 第2部分：油脂、农药和多氯联苯的萃取及油脂含量的测定 |
Fatty food - Determination of pesticides and polychlorinated biphenyls (PCBs) - Part 2: Extraction of fat, pesticides and PCBs, and determination of fat content |
| EN 1528-3-1996 |
油脂食品 农药和多氯联苯(PCBs)的测定 第3部分：提纯法 |
Fatty food - Determination of pesticides and polychlorinated biphenyls (PCBs) - Part 3: Clean-up methods |
| EN 1528-4-1996 |
油脂食品 农药和多氯联苯(PCBs)的测定 第3部分：测定、符合性试验及其它 |
Fatty food - Determination of pesticides and polychlorinated biphenyls (PCBs) - Part 4: Determination, confirmatory tests, miscellaneous |
| EN 1529-1999 |
门扇 高度、宽度、厚度和方度 公差级 |
Doors leaves - Height, width, thickness and squareness - Tolerance classes |
| EN 153-1995 |
电网供电的家用冰柜、冷冻食品贮存柜、食品冷冻及其组合冷冻柜的电能消耗和其它有关特性的测量方法 |
Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics |
| EN 1530-1999 |
门扇 总体的和局部的平整度 公差级 |
Door leaves - General and local flatness - Tolerance classes |
| EN 153000-1998 |
通用规范：分立压力接触电源半导体器件(鉴定批准) |
Generic specification: Discrete pressure contact power semiconductor devices (Qualification approval) |
| EN 1532-1997 |
液化天然气的安装和设备 船一岸接口 |
Installation and equipment for liquefied natural gas - Ship to shore interface |
| EN 1533-2000 |
木制和拼花地板 弯曲特性的测定 试验方法 |
Wood and parquet flooring - Determination of bending properties - Test methods |
| EN 1534-2000 |
木制和拼花地板 耐压痕测定 试验方法 |
Wood and parquet flooring - Determination of resistance to indentation (Brinell) - Test method |
| EN 1536-1999 |
特殊土工工程的操作 螺旋桩 |
Execution of special geotechnical work - Bored piles |
| EN 1538-2000 |
特殊土工工程操作 心墙 |
Execution of special geotechnical work - Diaphragm walls |
| EN 1539-2000 |
释放可燃物质量 烘干机和烤箱 安全要求 |
Dryers and ovens, in which flammable substances are released - Safety requirements |
| EN 1540-1998 |
工作场所的环境空气 术语 |
Workplace atmospheres - Terminology |
| EN 1541-2001 |
拟接触食品的纸及纸板 水萃取液中甲醛的测定 |
Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract |
| EN 1542-1999 |
混凝土结构的保护和修理用的产品和系统 试验方法 用拉断法测量粘结强度 |
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
| EN 1543-1998 |
混凝土结构的保护和修理用产品和设备 试验方法 高聚合物抗拉伸强度的测定 |
Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers |
| EN 1546-1-1999 |
识别卡系统 内部电子资金 第1部分：定义、概念和结构 |
Identification card systems - Inter-sector electronic purse - Part 1: Definitions, concepts and structures |
| EN 1546-2-1999 |
识别卡系统 内部电子资金 第2部分：安全保证结构 |
Identification card systems - Inter-sector electronic purse - Part 2: Security architecture |
| EN 1546-3-1999 |
识别卡系统 内部电子资金 第3部分：数据和内部交换 |
Identification card systems - Inter-sector electronic purse - Part 3: Data elements and interchanges |
| EN 1546-4-1999 |
识别卡系统 内部电子资金 第4部分：数据对象 |
Identification card systems - Inter-sector electronic purse - Part 4: Data objects |
| EN 1547-2001 |
工业热处理设备 工业热处理设备及辅助设备的噪声试验规则 |
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
| EN 1550-1997 |
机床安全 操作夹具的设计和构造的安全要求 |
Machine-tools safety - Safety requirements for the design and construction of work holding chucks |
| EN 1551-2000 |
工业卡车的安全 载荷超过10000公斤自驱动卡车 |
Safety of industrial trucks - Self propelled trucks over 10000 kg capacity |
| EN 1552-2003 |
地下采矿机械 采掘面上移动采掘机器 安全要求 开辟采掘面机械和刨煤机系统 |
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems |
| EN 1553-1999 |
农业机械 自行式、悬挂式、半悬挂式和牵引式机械 通用安全要求 |
Agricultural machinery - Agricultural self-propelled, mounted, semi-mounted and trailed machines - Common safety requirements |
| EN 1554-1998 |
传送带 鼓式磨擦试验 |
Conveyor belts - Drum friction testing |
| EN 1555-1-2002 |
供给气体燃料用塑料管道系统 聚已烯(PE) 第1部分：总则 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| EN 1555-2-2002 |
供给气体燃料用塑料管道系统 聚已烯(PE) 第2部分：管材 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
| EN 1555-3-2002 |
供给气体燃料用塑料管道系统 聚已烯(PE) 第3部分：管件 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
| EN 1555-4-2002 |
供给气体燃料用塑料管道系统 聚已烯(PE) 第4部分：阀门 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| EN 1555-5-2002 |
供给气体燃料用塑料管道系统 聚已烯(PE) 第5部分：针对系统用途的适合性 |
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
| EN 1556-1998 |
条码 术语 |
Bar coding - Terminology |
| EN 1557-1996 |
表面活性剂 传输过程中光学透明彩色液体(产品)X、Y、Z三色激励值色度 特征 |
Surface active agents - Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission |
| EN 1559-1-1997 |
铸造 交货的技术条件 第1部分：总则 |
Founding - Technical conditions of delivery - Part 1: General |
| EN 1559-2-2000 |
铸造 交货的技术条件 第2部分：钢铸件的附加要求 |
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| EN 1559-3-1997 |
铸造 交货的技术条件 第3部分：铁铸件的附加要求 |
Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| EN 1559-4-1999 |
铸造 交货的技术条件 第3部分：铝合金铸件的附加要求 |
Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 1559-5-1997 |
铸造 交货的技术条件 镁合金铸件的附加要求 |
Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings |
| EN 1559-6-1998 |
铸造 交货的技术条件 锌合金铸件附加要求 |
Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings |
| EN 1560-1997 |
铸造 铸铁的命名体系 材料符号及材料标准号 |
Founding - Designation system for cast iron - Material symbols and material numbers |
| EN 1561-1997 |
铸造 灰口铸铁 |
Founding - Grey cast irons |
| EN 1562-1997 |
铸造 可锻铸铁 |
Founding - Malleable cast irons |
| EN 1563-1997 |
铸造 球墨铸铁 |
Founding - Spheroidal graphite cast irons |
| EN 1564-1997 |
铸造 奥氏体回火铸铁 |
Founding - Austempered ductile cast irons |
| EN 1565-1-1998 |
建筑物结构内污物和废水排放(低和高温)用塑料管道系统 苯乙烯共聚混合物(SAN+PVC) 第1部分：管材、管件和 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system |
| EN 1566-1-1998 |
建筑物结构内污物和废水排放(低和高温)用塑料管道系统 氯化聚偏氯乙烯(PVC-C) 第1部分：管材、管件和系统 |
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system |
| EN 1567-1999 |
建筑阀门 减水压阀门和组合减水压阀门 要求和试验 |
Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests |
| EN 1568-1-2000 |
灭火介质 浓缩泡沫 第1部分：用于不溶水的液体表面的中等膨胀的浓缩泡沫规范格 |
Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids |
| EN 1568-2-2000 |
灭火介质 浓缩泡沫 第2部分：用于不溶水的液体表面的高度膨胀的浓缩泡沫规范 |
Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids |
| EN 1568-3-2000 |
灭火介质 浓缩泡沫 第3部分：用于不溶水的液体表面的低度膨胀的浓缩泡沫规范 |
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids |
| EN 1568-4-2000 |
灭火介质 浓缩泡沫 第4部分：用于易可溶水的液体表面的低度膨胀的浓缩泡沫规范 |
Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids |
| EN 1569-1999 |
体育场所地面 滚动负荷下的性能测定 |
Surfaces for sports areas - Determination of the behaviour under a rolling load |
| EN 1570-1998 |
升降台的安全要求 |
Safety requirements for lifting tables |
| EN 1570/A1-2004 |
升降台的安全要求 |
|
| EN 1571-1996 |
条码 数据标识符 |
Bar coding - Data identifiers |
| EN 1572-1996 |
条码 运输单位的唯一标识符 |
Bar coding - Unique identifier for transport units |
| EN 1573-1996 |
条码 多种产业运输标签 |
Bar coding - Multi industry transport label |
| EN 159-1991 |
吸水率E ≤10%的粉压陶瓷瓷砖 BIII组 |
Dust-pressed ceramic tiles with water absorption E ≤10 %; Group BIII |
| EN 1591-1-2001 |
法兰及其连接件 用垫圈装配的圆法兰盘连接件设计规则 第1部分：计算方法 |
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method |
| EN 1592-1-1997 |
铝和铝合金 HF接缝焊接管 第1部分：检验和交货技术条件 |
Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery |
| EN 1592-2-1997 |
铝和铝合金 HF接缝焊接管 第2部分：机械性能 |
Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties |
| EN 1592-3-1997 |
铝和铝合金 HF接缝焊接管 第3部分：圆形管的尺寸和形状公差 |
Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes |
| EN 1592-4-1997 |
铝和铝合金 HF接缝焊接管 第4部分：方形、矩形和异形管的尺寸和形状公差 |
Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes |
| EN 1593-1999 |
无损试验 漏渗测试 发泡技术 |
Non-destructive testing - Leak testing - Bubble emission techniques |
| EN 1594-2000 |
供气系统 最大运行压力超过16bar的管道 功能要求 |
Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| EN 1595-1997 |
硼硅酸盐玻璃3.3制压力设备 设计、制造和检验的一般规则 |
Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing |
| EN 1596-1998 |
专用液化石油器规范 移动式和便携式非家强制对流直燃式空气加热器 |
Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-domestic forced convection direct fired air heaters |
| EN 1596-2004 |
专用于液化石油器的规范.移动式和便携式非家用强制对流直燃式空气加热器 |
|
| EN 1596/prA1-2003 |
专用液化石油器规范 移动式和便携式非家用强制对流直燃式空气加热器 修改A1 |
Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-domestic forced convection direct fired air heaters; Amendment A1 / Note: Intended as an amendment to EN 1596 (1998-06). |
| EN 1597-1-1997 |
焊料 试验方法 第1部分：镍和镍合金钢中完全焊接金属试验样品用试件 |
Welding consumables - Test methods - Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys |
| EN 1597-2-1997 |
焊接耗材 试验方法 钢单焊和双焊技术试验样品试件的制备 |
Welding consumables - Test methods - Part 2: Preparation of test piece for single-run and two-run technique test specimens in steel |
| EN 1597-3-1997 |
焊接耗材 试验方法 第3部分：角焊接中焊料定位能力的试验 |
Welding consumables - Test methods - Part 3: Testing of positional capability of welding consumables in a fillet weld |
| EN 1599-1997 |
焊接耗材 抗蠕变钢手工金属电弧焊接涂覆电极 分类 |
Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification |
| EN 1600-1997 |
焊接消耗品 不锈和耐热钢手工金属电弧焊接涂覆电极 分类 |
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification |
| EN 1601-1997 |
液体石油产品 无铅汽油 通过气相色谱法对有机氧化复合物和总有机结合氧含量的测定 |
Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID) |
| EN 160100-1997 |
分规范：经质量评定的印制板组件制造商的能力批准 |
Sectional specification: Capability approval of manufacturers of printed board assemblies of assessed quality |
| EN 160101-1998 |
空白详细规范：经质量评定的印制板组件模块电子器件能力批准 |
Blank detail specification: Printed board assembly modular electronic units of assessed quality - Capability approval |
| EN 160200-1-1997 |
分规范：经质量评定的微波模块电子器件第1部分：能力批准程序 |
Sectional specification: Microwave modular electronic units of assessed quality - Part 1: Capability approval procedure |
| EN 160200-2-1997 |
分规范：经质量评定的微波模块电子器件第2部分：试验方法索引 |
Sectional specification: Microwave modular electronic units of assessed quality - Part 2: Index of test methods |
| EN 160201-1997 |
空白详细规范：经质量评定的微波模块电子器件能力批准 |
Blank detail specification: Microwave modular eletronic units of assessed quality - Capability approval |
| EN 1603-1996 |
建筑物用绝热产品 在恒定常规实验室条件下尺寸稳定性的测定 ( 23℃/50%相对湿度) |
Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 ℃/50% relative humidity) |
| EN 161-2001 |
气体燃烧器和燃气器具自动关闭阀 |
Automatic shut-off valves for gas burners and gas appliances |
| EN 1610-1997 |
排水管和下水道的结构和试验 |
Construction and testing of drains and sewers |
| EN 1612-1-1997 |
橡胶和塑料机械 反应模塑机械 第1部分：测量和混合装置的安全要求 |
Rubber and plastics machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units |
| EN 1612-2-2000 |
橡胶和塑料机械 反应模塑机械 第2部分：反应模压车间的安全要求 |
Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant |
| EN 1615-2000 |
一次性使用肠内进食导管和肠排出装置及它们的连接件 设计和试验 |
Enteral feeding catheters and enteral giving sets for single use and their connectors - Design and testing |
| EN 1617-1997 |
一次性使用的灭菌排泄导管和辅助装置 |
Sterile drainage catheters and accessory devices for single use |
| EN 1618-1997 |
非血管内导管用的其它导管 通用性能的测试方法 |
Catheters other than intravascular catheters - Test methods for common properties |
| EN 1619-1996 |
生物技术 大规模加工和生产品不守恒规程的管理和组织的一般要求 |
Biotechnology - Large-scale process and production - General requirements for management and organization for strain conservation procedures |
| EN 1620-1996 |
生物技术 大规模加工和生产 依照危害程度的工厂建造 |
Biotechnology - Large-scale process and production - Plant building according to the degree of hazard |
| EN 1621-1-1997 |
摩托车驾驶员防机械冲撞的防护服 第1部分：冲撞保护服的试验方法和要求 |
Motorcyclists protective clothing against mechanical impact - Part 1: Requirements and test methods for impact protectors |
| EN 1621-2-2003 |
摩托车驾驶员防机械冲撞的防护服 第2部分：摩拖车后背保护服的要求和试验方法 |
Motorcyclists protective clothing against mechanical impact - Part 2: Motorcyclists back protectors; Requirements and test methods |
| EN 1622-1997 |
水质分析 阈值臭味数(TON)和极限香味值(TFN)的测定 |
Water analysis - Determination of the threshold odour number (TON) and threshold flavour number (TFN) |
| EN 1624-1999 |
纺织和纺织制品 工业和技术纺织品的燃烧特性 垂直向样品火焰蔓延性的测定程序 |
Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens |
| EN 1625-1999 |
纺织品和纺织制品 工业和技术纺织品的燃烧特性 垂直向样品易点燃性的测定程序 |
Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of vertically oriented specimens |
| EN 1626-1999 |
低温容器 低温设备用阀门 |
Cryogenic vessels - Valves for cryogenic service |
| EN 163100-1991 |
分规范：膜集成电路和混合集成电路 |
Sectional specification:Film and hybrid integrated circuits |
| EN 163101-1991 |
空白详细规范：膜集成电路和混合集成电路 |
Blank detail specification: film and hybrid integrated circuits |
| EN 1634-1-2000 |
门和百叶窗组件的耐火试验 第1部分：着火门和百叶窗 |
Fire resistance tests for door and shutter assemblies - Part 1: Fire doors and shutters |
| EN 1634-3-2001 |
门和百叶窗组件的耐火试验 第3部分：烟幕控制门和百叶窗 |
Fire resistance tests for door and shutter assemblies - Part 3: Smoke control doors and shutters |
| EN 1634-3-2004 |
门和遮板组件的耐火性试验.第3部分:防烟门和遮板 |
|
| EN 1636-3-1997 |
无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第3部分：管件 |
Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings |
| EN 1636-5-1997 |
无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第5部分：针对接头 |
Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints |
| EN 1636-6-1997 |
无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第6部分：安装实践 |
Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 6: Practices for installation |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com