标准号 |
中文名称 |
英文名称 |
EN 60947-7-2-2002 |
低压开关设备和控制设备第7-2部分:辅助设备铜导线用防护导线接线端子排 |
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment; Protective conductor terminal blocks for copper conductors (IEC 60947-7-2:2002) / Note: Endorsement notice |
EN 60947-7-3-2002 |
低压开关装置和控制装置第7-3部分:辅助设备引线接线板的安全要求 |
Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment; Safety requirements for fuse terminal blocks (IEC 60947-7-3:2002) / Note: Endorsement notice |
EN 60947-8-2003 |
低压开关装置和控制装置第8部分:旋转电机嵌入式热保护(PTC)控制装置 |
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines (IEC 60947-8:2003) / Note: Endorsement notice |
EN 60948-1990 |
家电系统数字键盘 |
Numeric keyboard for home electronic systems (HES) (IEC 60948:1988) |
EN 60950-1-2001 |
信息技术设备的安全第1部分:一般要求 |
Information technology equipment - Safety - Part 1: General requirements (IEC 60950-1:2001, modified) / Note: Endorsement notice |
EN 60950-21-2003 |
信息技术设备安全第21部分:远程动力输送 |
Information technology equipment - Safety - Part 21: Remote power feeding (IEC 60950-21:2002) / Note: Endorsement notice |
EN 60952-1-1993 |
飞机用蓄电池组第1部分:一般试验要求和性能等级 |
Aircraft batteries - Part 1: General test requirements and performance levels (IEC 60952-1:1988) |
EN 60952-1-2004 |
飞机用蓄电池组.第1部分:一般试验要求和性能水平 |
|
EN 60952-2-1993 |
飞机用蓄电池组第2部分:设计和制造要求 |
Aircraft batteries - Part 2: Design and construction requirements (IEC 60952-2:1991) |
EN 60952-2-2004 |
飞机用蓄电池组.第2部分:设计和制造要求 |
|
EN 60952-3-1995 |
飞机用蓄电池组第3部分:外部电连接器 |
Aircraft batteries - Part 3: External electrical connectors (IEC 60952-3:1993) |
EN 60952-3-2004 |
飞机用蓄电池组.第3部分:产品规范及设计与性能的声明(DDP) |
|
EN 60953-1-1995 |
汽轮机热力验收试验规范第1部分:方法A适用于大容量凝汽式汽轮机的高精度规范 |
Rules for steam turbine thermal acceptance tests - Part 1: Method A - High accuracy for large condensing steam turbines (IEC 60953-1:1990) |
EN 60953-2-1995 |
汽轮机热力验收试验规范第2部分:方法B适用于各种类型和容量汽轮机的较宽精度和规范 |
Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines (IEC 60953-2:1990) |
EN 60953-3-2002 |
汽轮机热力验收试验规范第3部分: |
Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines (IEC 60953-3:2001) |
EN 60958-1-2000 |
数字音频接口第1部分:总则 |
Digital audio interface - Part 1: General (IEC 60958-1:1999) |
EN 60958-3-2003 |
数字音频接口第3部分:消费类用途 |
Digital audio interface - Part 3: Consumer applications (IEC 60958-3:2003) / Note: Endorsement notice |
EN 60958-4-2000 |
数字音频接口第4部分:专业类用途 |
Digital audio interface - Part 4: Professional applications (IEC 60958-4:1999) |
EN 60961-1994 |
使用宽12.65mm(0.5in)L型磁带的螺旋扫描盒式磁带录像系统 |
Helican-scan video-tape cassette system using 12,65 mm (0,5 in) magnetic tape on type L (IEC 60961:1993) |
EN 60966-1-1999 |
射频与同轴电缆组件第1部分:总规范一般要求和试验方法 |
Radio frequency and coaxial cables assemblies - Part 1: Generic specification - General requirements and test methods (IEC 60966-1:1999) |
EN 60966-2-2-1994 |
射频和同轴电缆组件第2-2部分:柔软性同轴电缆组件空白详细规范 |
Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies (IEC 60966-2-2:1992) |
EN 60966-2-3-1999 |
射频和同轴电缆部件第2-3部分:柔软同轴电缆部件的详细规范 |
Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies (IEC 60966-2-3:1996) |
EN 60966-2-4-2003 |
射频与同轴电缆组件第2-4部分:无线电和电视接收机用电缆部件详细规范(频率范围0至3000MHz的IEC60169-2 |
Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-2 connectors (IEC 60966-2-4:2003) / Note: Endorsement notice |
EN 60966-2-5-2003 |
射频和同轴电缆组件第2-5部分:无线电和电视接收机用电缆组件的详细规格频率范围在0至1000 MHz |
Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 1000 MHz, IEC 60169-2 connectors (IEC 60966-2-5:2003) / Note: Endorsement notice |
EN 60966-2-6-2003 |
射频和同轴电缆组件第2-6部分:电视和无线电接收机用电缆组件的详细规格频率范围在0至3000 MHz,IEC 601 |
Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-24 connectors (IEC 60966-2-6:2003) / Note: Endorsement notice |
EN 60966-3-1-1994 |
射频和同轴电缆组件第3-1部分:半柔软同轴电缆组件空白详细规范 |
Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies (IEC 60966-3-1:1992) |
EN 60966-3-1994 |
射频和同轴电缆组件第3部分:半柔软同轴电缆组件分规范 |
Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies (IEC 60966-3:1992) |
EN 60966-3-2-1999 |
射频和同轴电缆部件第3-1部分:.GSM(0.8GHz-1GHz)用半柔软同轴电缆部件的详细规范 |
Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz) (IEC 60966-3-2:1996) |
EN 60966-4-1-1994 |
射频和同轴电缆部件第4-1部分:半硬性同轴电缆组件空白详细规范 |
Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies (IEC 60966-4-1:1994) |
EN 60966-4-1994 |
射频和同轴电缆部件第4部分:半硬性同轴电缆组件分规范 |
Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 60966-4:1992) |
EN 60974-10-2003 |
弧焊设备第10部分:电磁兼容(EMC)要求 |
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements (IEC 60974-10:2002, modified) / Note: Endorsement notice |
EN 60974-11-1995 |
电弧焊设备第11部分:焊条钳 |
Arc-welding equipment - Part 11: Electrode holders (IEC 60974-11:1992, modified) |
EN 60974-12-1995 |
弧焊设备第12部分:焊接电缆的连接器 |
Arcwelding equipment - Part 12: Coupling devices for welding cables (IEC 60974-12:1992, modified) |
EN 60974-2-2003 |
电弧焊设备第2部分:液体冷却系统 |
Arc welding equipment - Part 2: Liquid cooling systems (IEC 60974-2:2002) / Note: Endorsement notice |
EN 60974-5-2002 |
电弧焊设备第5部分:送线器 |
Arc-welding equipment - Part 5: Wire feeders (IEC 60974-5:2002) |
EN 60974-6-2003 |
弧焊设备第6部分:有限工作内容的手动金属弧焊电源 |
Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources (IEC 60974-6:2003) / Note: Endorsement notice |
EN 60974-7-2000 |
电弧焊设备第7部分:焊灯(枪) |
Arc welding equipment - Part 7: Torches (IEC 60974-7:2000) |
EN 60974-8-2004 |
电弧焊设备.第8部分:焊接和等离子切割设备用气体控制台 |
|
EN 60983-1996 |
小型灯 |
Miniature lamps (IEC 60983:1995) |
EN 60984-1992 |
带电作业用绝缘袖套 |
Sleeves of insulating material for live working (IEC 60984:1990, modified) |
EN 60990-1999 |
接触电流和保护导体电流的测量方法 |
Methods of measurement of touch current and protective conductor current (IEC 60990:1999) |
EN 60993-2002 |
有开口的镉镍电池用电解液 |
Electrolyte for vented nickel-cadmium cells (IEC 60993:1989) / Note: Endorsement notice |
EN 60994-1992 |
水力机械(水轮机、蓄水泵和水轮泵)振动和脉动的现场测量指南 |
Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) (IEC 60994:1991) |
EN 60998-1-1993 |
家用和类似用途低压电路连接设备第2-1部分:一般要求 |
Connecting devices for low voltage circuits for household and similar purposes - part 1: General requirements (IEC 60998-1:1990, modified) |
EN 60998-2-1-1993 |
家用和类似用途低压电路连接设备第2-1部分:带螺旋式夹紧装置的独立机构连接装置的特殊要求 |
Connecting devices for low voltage circuits for household and similar purposes; part 2-1: particular requirements for connecting devices as separate entities with screw-type clamping units (IEC 60998-2-1:1990, modified) |
EN 60998-2-2-1993 |
家用和类似用途低压电路连接器件第2-2部分:作为带有无螺丝型的夹紧器件的独立单的连接器件的特别要求 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units (IEC 60998-2-2:1991) |
EN 60998-2-3-1993 |
家用和类似用途低压电路连接器件第2-3部分:作为带有绝缘穿孔夹紧器件的独立单的连接器件 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulating piercing clamping units (IEC 60998-2-3:1991) |
EN 60998-2-4-1993 |
家用和类似用途低压电路连接器件第2-4部分:扭绞式连接器件的特殊要求 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices (IEC 60998-2-4:1993) |
EN 60999-1-2000 |
连接器件铜导线有螺纹式和无螺纹式夹紧装置的安全要求第1部分:从0.2-35mm2(包括35mm2)导线用的夹紧 |
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 |
EN 610-1995 |
锡和锡合金 锡锭 |
Tin and tin alloys - Ingot tin |
EN 61000-2-10-1999 |
电磁兼容性(EMC)第2-10部分:环境 HEMP环境描述传导骚扰 |
Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance (IEC 61000-2-10:1998) |
EN 61000-2-12-2003 |
电磁兼容(EMC)第-12部分:环境公共中压供电系统中的低压干扰和信号的兼容等级 |
Electromagnetic compatibility (EMC) - Part 2-12: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems (IEC 61000-2-12:2003) / Note: Endorsement notice |
EN 61000-2-2-2002 |
电磁兼容性(EMC)第2-2部分:环境在共用低压供电系统中低频传导骚扰和信号传输的兼容性水平 |
Electromagnetic compatibility (EMC) - Part 2-2: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (IEC 61000-2-2:2002) / Note: Endorsement notice |
EN 61000-2-4-2002 |
电磁兼容性(MEC)第2-4部分:环境工厂中低频传导骚扰的兼容性水平 |
Electromagnetic compatibility (EMC) - Part 2-4: Environment; Compatibility levels in industrial plants for low-frequency conducted disturbances (IEC 61000-2-4:2002) / Note: Endorsement notice |
EN 61000-2-9-1996 |
电磁兼容性(EMC)第2部分:环境第9节:HEMP环境描述辐射骚扰基础EMC出版物 |
Elektromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance - Basic EMC publication (IEC 61000-2-9:1996) |
EN 61000-3-11-2000 |
电磁兼容性第3-11部分:限值共用低压供电系统中电压变化、电压波动和闪烁的限值额定电流为75A并需 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems; Equipment with rated current ≤75 A and subject to conditional connection (IEC 61000- |
EN 61000-3-2-2000 |
电磁兼容性(EMC)第3-2部分:额定值辐射谐波电流的额定值(设备输入电流为16A/相位) |
Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) (IEC 61000-3-2:2000, modified) |
EN 61000-3-2/prA1-2001 |
标准号: |
中文标题: |
EN 61000-3-2/prA2-2003 |
EN 61000-3-2/prA2-2003 |
|
EN 61000-3-3/prA11-1995 |
EN 61000-3-3/prA11-1995 |
|
EN 61000-4-1-2000 |
电磁兼容性(MEC)第4-1部分:试验和测量技术IEC61000-4系列综述 |
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques; Overview of IEC 61000-4 series (IEC 61000-4-1:2000) |
EN 61000-4-10/prAA-2000 |
电磁兼容性(EMC)第4部分:试验和测量方法第10节:阻尼振荡磁场抗扰度试验基础(EMC)出版物修改 |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-10/prAB-2000 |
电磁兼容性(EMC)第4部分:试验和测量方法第10节:阻尼振荡磁场抗扰度试验基础(EMC)出版物修改 |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-4-11-2004 |
电磁兼容性.第4-11部分:试验和测量技术.电压暂降、短时中断和电压变化抗扰度试验 |
|
EN 61000-4-11/prAA-2000 |
电磁兼容性(EMC)第4部分:试验和测量方法第11节:电压暂降、短时中断及电压变化抗扰性试验 修改A |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-11/prAB-2000 |
电磁兼容性(EMC)第4部分:试验和测量方法第11节:电压暂降、短时中断及电压变化抗扰性试验 修改草 |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-4-12/prAA-2000 |
电磁兼容性(EMC)第4部分:试验和测量方法第12节:振荡波抗扰性试验基础EMC出版物 修改AA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-12/prAB-2000 |
电磁兼容性(EMC)第4部分:试验和测量方法第12节:振荡波抗扰性试验基础EMC出版物 修改AB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-4-13-2002 |
电磁兼容性(EMC)第4部分:试验和测量方法第13节:试验和测量方法 在交流电输入端口低频抗干扰试验 |
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques; Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (IEC 61000-4-13:2002) / Note: Endorsement notice |
EN 61000-4-14-1999 |
电磁兼容性(EMC)第4-14部分:试验和测量技术电压波动抗扰度试验 |
Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test (IEC 61000-4-14:1999) |
EN 61000-4-16-1998 |
电磁兼容性(EMC)第4-16部分:试验和测量技术对频率在0-150kHz范围内的传导共模骚扰的抗扰试验 |
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998) |
EN 61000-4-17-1999 |
电磁兼容性(EMC)第4-17部分:试验和测量技术直流输入电力端口上的纹抗扰度试验 |
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test (IEC 61000-4-17:1999) |
EN 61000-4-2/prA3-1999 |
电磁兼容性(MEC)第4部分:试验和测量技术第2节:静电放电抗扰度试验基础EMC出版物修改草案3 |
Amendment to IEC 61000-4-2 |
EN 61000-4-2/prAA-2000 |
电磁兼容性(MEC)第4部分:试验和测量技术第2节:静电放电抗扰度试验基础EMC出版物修改草案AA |
Amendment to IEC 61000-4-2: A test set-up for portable and/or double insulated table top equipment |
EN 61000-4-20-2003 |
电磁兼容(EMC)第4-20部分:试验和测量技术横向电磁(TEM)波导的发射和抗扰试验 |
Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques; Emission and immunity testing in transverse electromagnetic (TEM) waveguides (IEC 61000-4-20:2003) / Note: Endorsement notice |
EN 61000-4-23-2000 |
电磁兼容性(EMC)第4-23部分:试验和测量技术HEMP和其他辐射骚扰的保护装置试验 |
Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques; Test methods for protective devices for HEMP and other radiated disturbances (IEC 61000-4-23:2000) |
EN 61000-4-24-1997 |
电磁兼容性(EMC)第4部分:试验和测量技术第24节:HEMP传导骚扰的保护装置试验方法基础(EMC)出版物 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance - Basic EMC publication (IEC 61000-4-24:1997) |
EN 61000-4-25-2002 |
电磁兼容性(EMC)第4-25部分:试验和测量技术设备和系统的HEMP抗干扰试验方法 |
Electromagnetic compatibility (EMC) - Part 4-25: Testing and measuring techniques - HEMP immunity test methods for equipment and systems (IEC 61000-4-25:2001) |
EN 61000-4-27-2000 |
电磁兼容性(EMC)第4-27部分:试验和测量技术不平衡抗扰度试验 |
Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques; Unbalance, immunity test (IEC 61000-4-27:2000) |
EN 61000-4-28-2000 |
电磁兼容性(EMC)第4-28部分:试验和测量技术电力频率变化抗扰度试验 |
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test (IEC 61000-4-28:1999) |
EN 61000-4-29-2000 |
电磁兼容性(EMC)第4-29部分:试验和测量技术直流输入电力端口上的电压暂降、断时中断和电压变化抗扰 |
Electromagnetic Compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (IEC 61000-4-29:2000) |
EN 61000-4-30-2003 |
电磁兼容(EMC)第4-30部分:试验和测量技术动力质量测量方法 |
Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques; Power quality measurement methods (IEC 61000-4-30:2003) / Note: Endorsement notice |
EN 61000-4-4-2004 |
电磁兼容性(EMC).第4-4部分:试验和测量技术.电快速瞬变/猝发抗扰度试验 |
|
EN 61000-4-4/prAA-2000 |
电磁兼容性(EMC)第4部分:试验和测量技术第4节:电快速瞬变/猝发抗扰试验基本EMC出版物 修改AA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-4/prAB-2000 |
电磁兼容性(EMC)第4部分:试验和测量技术第4节:电快速瞬变/猝发抗扰试验基本EMC出版物 修改AB |
Amendment to IEC 61000-4-4 (1995) |
EN 61000-4-5/prAA-2000 |
电磁兼容性(MEC)第4部分:试验和测量技术第5节:浪涌抗扰度试验修改草案AA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-5/prAB-2000 |
电磁兼容性(MEC)第4部分:试验和测量技术第5节:浪涌抗扰度试验修改草案AB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-4-7-2002 |
电磁兼容性(MEC)第4部分:试验和测量技术第7节:供电系统和与其连接的设备的谐波和谐波间的测量及测量 |
Electromagnetic compatibility (EMC) - Part 4: testing and measurement techniques; section 7: general guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (IEC 61000-4-7:1991) / N |
EN 61000-4-8/prAA-2000 |
电磁兼容性(EMC)第4部分::试验和测量方法第8节:工频磁场抗扰度试验基础(EMC)出版物 修改AA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-8/prAB-2000 |
电磁兼容性(EMC)第4部分::试验和测量方法第8节:工频磁场抗扰度试验基础(EMC)出版物 修改AB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-4-9/prAA-2000 |
电磁兼容性(EMC)第4部分:试验和测量方法第9节:脉冲磁场抗扰试验基础(EMC)出版物修改AA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-9/prAB-2000 |
电磁兼容性(EMC)第4部分:试验和测量方法第9节:脉冲磁场抗扰试验基础(EMC)出版物修改AB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-5-5-1996 |
电磁兼容性(EMC)第5部分:安装和调试指南第5节:HEMP射导骚扰保护装置规范 基础(EMC)出版物 |
Elektromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance - Basic EMC publication (IEC 61000-5-5:1996) |
EN 61000-5-7-2001 |
电磁兼容性(EMC)第5-7部分:安装和调试指南外壳对电磁骚扰的保护度(EM规程) |
Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines; Degrees of protection by enclosures against electromagnetic disturbances (EM code) (IEC 61000-5-7:2001) |
EN 61000-6-1-2001 |
电磁兼容性(EMC)第6-1部分:通用标准居注商业和轻工业环境的抗扰度 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards; Immunity for residential, commercial and light-industrial environments (IEC 61000-6-1:1997, modified) |
EN 61000-6-2-2001 |
电磁兼容性(EMC)第6-2部分:通用标准工业环境的抗扰度 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards; Immunity for industrial environments (IEC 61000-6-2:1999, modified) |
EN 61000-6-3-2001 |
电磁兼容性(EMC)第6-3部分:通用标准与住宅有关的排放标准商业和轻工业环境 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards; Emission standard for residential, commercial and light-industrial environments (IEC 61000-6-3:1996, modified) |
EN 61000-6-3-2004 |
电磁兼容性.第6-3部分:通用标准.居注商业和轻工业环境用辐射标准 |
|
EN 61000-6-4-2001 |
电磁兼容性(EMC)第6-4部分:通用标准工业环境用辐射标准 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards; Emission standard for industrial environments (IEC 61000-6-4:1997, modified) |
EN 61003-1-1993 |
工业过程控制系统模似输入和两路或多路输出的仪器第1部分:性能评定方法 |
Industrial-process control systems- Instruments with analogue inputs and two- or multi-state outputs- Part 1: Methods of evaluating the performance (IEC 61003-1:1991) |
EN 61003-1-2004 |
工业过程控制系统.模拟输入和两路或多路输出的仪器.第1部分:性能评定方法 |
|
EN 61006-1993 |
测定电气绝缘材料玻璃化转变温度的试验方法 |
Methods of test for the determination of the glass transition temperature of electrical insulating materials (IEC 61006:1991) |
EN 61006-2004 |
电气绝缘材料.玻璃化转变温度测定用试验方法 |
|
EN 61007-1997 |
电子和通信设备用变压器和电感器测量方法和试验规程 |
Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures (IEC 61007:1994, modified) |
EN 61008-1-2004 |
家用和类似用途的无综合过电流保护的剩余电流断路器(RCCBs).第1部分:通用规则 |
|
EN 61008-1/prA15-2001 |
家用和类似用途的没有综合过电流保护的剩余电流断路器(RCCBs)第1部分:通用规则 修改草案15 |
Draft amendment 1 to IEC 61008-1, Ed. 2 |
EN 61008-1/prA16-1999 |
标准号: |
中文标题: |
EN 61008-1/prAA-2001 |
家用和类似用途的没有综合过电流保护的剩余电流断路器(RCCBs)第1部分:通用规则 修改草案AA |
Draft amendment to IEC 61008-1, Ed. 2: Requirements for use of fuses instead of silver wires as SCPD at the short-circuit tests of RCCBs |
EN 61009-1-2004 |
家用和类似用途的有综合过电流保护的剩余电流断路器(RCCBs).第1部分:通用规则 |
|
EN 61009-1/prA12-1995 |
家用和类似用途的有综合过电流保护的剩余电流断路器(RCCBs)第1部分:通用规则 修改草案12 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules; Amendment A12 |
EN 61009-1/prA16-2001 |
标准号: |
中文标题: |
EN 61009-1/prA18-1999 |
标准号: |
中文标题: |
EN 61010-031-2002 |
测量、控制和实验室用电气设备的安全要求第3-031部分:电气测量和试验用手持探针组件 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test (IEC 61010-031:2002) |
EN 61010-1-2001 |
测量、控制和实验室用电子设备的安全要求第1部分:一般要求 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements (IEC 61010-1:2001) / Note: Includes Corrigendum of June 2002 |
EN 61010-2-010-1994 |
测量、控制和试验室用电气设备的安全要求第2-010部分:材料加热 用实验室设备的特殊要求 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials (IEC 61010-2-010:1992, modified) |
EN 61010-2-020-1994 |
测量、控制和试验室用电气设备的安全要求第2-020部分:实验室离心机的特殊要求 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges (IEC 61010-2-020, modified) |
EN 61010-2-032-2002 |
测量、控制和实验室用电气设备的安全要求第2-032部分:电气测量和试验用手持和手操作电流传感器的特殊要 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement (IEC 61010-2-032:2002) / Note: Endorsem |
EN 61010-2-041-1996 |
测量、控制和实验室用电气设备的安全要求第2-41部分:医疗材料处理及实验室加工用蒸压器的的特殊要求 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes (IEC 61010-2-041:1996) |
EN 61010-2-042-1997 |
测量、控制和实验室用电气设备的安全要求第2-042部分:医用材料处理及实验室加工用毒性气体蒸压器和消毒 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes (IEC 61010) |
EN 61010-2-043-1997 |
测量、控制和实验室用电气设备的安全要求第2-043部分:医用材料处理及实验室加工用热空气或热惰性气体干 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-043: Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory proc |