标准号 |
中文名称 |
英文名称 |
| prEN 6047-002-2001 |
航空航天系列耐燃和持续摄氏200度大电流运行的螺纹式环行连接的电连接器第002部分：连接排列和性能规范 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, for high current, operating temperature + 200℃ continuous, and fire resistant - Part 002: Specification of performance and contact arrangements |
| prEN 6047-003-2001 |
航空航天系列 耐燃和持续摄氏200度大电流运行温度的螺纹式环形连接的电连接器第003部分：方形法兰插座 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, for high current, operating temperature + 200℃ continuous, and fire resistant - Part 003: Square flange receptacle; Product standard |
| prEN 60489-2-1992 |
移动业务中用的无线电设备的测量方法 第2部分：采用A3E、F3E或G3E发射的发射机 草案 |
Methods of measurement for radio equipment used in the mobile services; part 2: transmitters employing A3E, F3E or G3E emissions (IEC 60489-2:1991) |
| prEN 60489-4-1992 |
移动业务中用的无线电设备的测量方法 第4部分：采用单边带发射（R3E、H3E或J3E）的发射机草案 |
Methods of measurement for radio equipment used in the mobile services; part 4: transmitters employing single-sideband emissions (R3E, H3E or J3E) (IEC 60489-4:1991) |
| prEN 6049-001-2001 |
航空航天系列设备电缆偏聚酸胺纤维保护套第001部分：技术规范 |
Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 001: Technical specification |
| prEN 6049-006-2001 |
航空航天系列设备电缆偏聚酸胺纤维保护套第006部分：自动包装保护套易弯曲接线端装置产品标准 |
Aerospace series - Electrical cables, installation; Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation; Product standard |
| prEN 6050-2001 |
航空航天系列 7050铝合金化学薄膜的剪型冲模锁紧紧公差的100度埋头的轧制销 英制系列 |
Aerospace series - Pins, close tolerance, swage locking, 100?countersunk head reduced, shear type, in aluminium alloy 7050, chemical film - Inch series |
| prEN 6051-2001 |
航空航天系列3003铝合金化学薄膜剪型冲模锁紧卡圈 英制系列 |
Aerospace series - Collars, swage locking, shear type, in aluminium alloy 3003, chemical film - Inch series |
| prEN 60512-10-4-2003 |
电子设备用连接器试验和测量第10部分：撞击试验（自由件）静负荷试验（固定件）寿命试验和过负荷试 |
IEC 60512-10-4, Ed. 2: Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests; Test 10d: Electrical overload (connectors) |
| prEN 60512-11-14-2003 |
电子设备用连接器试验和测量第11-14部分：气候试验试验11p：一种流动气体的腐蚀试验 |
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests; Test 11p: Flowing single gas corrosion test |
| prEN 60512-25-5-2001 |
电子设备用连接器试验和测量第25－5部分：试验25e回波损耗草案 |
IEC 60512-25-5: Connectors for electronic equipment - Basic tests and measurements - Part 25-5: Test 25e; Return loss |
| prEN 60519-1-2003 |
电器设备的安全第１部分：一般要求草案 |
Safety in electroheat installations - Part 1: General requirements |
| prEN 60534-4-1998 |
工业过程控制阀第４部分：检验和常规试验草案 |
IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testing |
| prEN 6054-2001 |
航空航天系列6061铝合金化学薄膜剪型冲模锁紧卡圈 英制系列 |
Aerospace series - Collars, swage locking, shear type, in aluminium alloy 6061, chemical film - Inch series |
| prEN 60571-1997 |
铁路车辆用点子设备 |
IEC 60571: Electronic equipment used on rail vehicles |
| prEN 6059-100-2001 |
航空航天系列 设备电缆保护套试验方法第100部分：总则 |
Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 100: General |
| prEN 6059-303-2001 |
航空航天系列 设备电缆保护套试验方法第303部分：耐流体性 |
Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 303: Resistance to fluids |
| prEN 6059-406-2001 |
航空航天系列设备电缆保护套试验方法第406部分：振动 |
Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 406: Vibration |
| prEN 60598-1-2003 |
灯具第1部分：一般要求和试验 建议Ａ－ＨＨ草案 |
IEC 60598-1, Ed. 6: Luminaires - Part 1: General requirements and tests |
| prEN 606-1999 |
条码 钢制品用运输和处理标签 |
Bar coding - Transport and handling labels for steel products |
| prEN 60601-1-2002 |
医用电气设备第1部分：安全通用要求和主要特性草案 |
IEC 60601-1, Ed. 3: Medical electrical equipment - Part 1: General requirements for safety and essential performance |
| prEN 60601-1-8-2003 |
医院电气设备第1部分：安全通用要求第8节：并列标准 报警系统要求 试验和指南 医疗电子和电气 |
Medical electrical equipment - Part 1-8: General requirements for safety; Collateral standard: Alarm systems; General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
| prEN 60603-7-3-1998 |
用于印制电路板的3MHz以下频率连接器 第7－３部分 |
IEC 60603-7: Inclusion of shield mating in IEC 60603-7 |
| prEN 60603-7-4-2003 |
电气设备接头第7-4部分：用于数据传输频率高达 250 MHz (第 6类, 未屏蔽)的8道活动和固定接头的技术规范 |
IEC 60603-7-4, Ed. 1.0: Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
| prEN 60614-2-7-1995 |
电气装置用导管规范第２部分：导管的特殊规范第７节：无螺纹铝合金刚性导管 |
Draft IEC 614-2-7: Conduits for electrical installations - Specification - Part 2: Particular specifications for conduits - Section 7: Rigid non-threadable conduits of aluminium alloy |
| prEN 60616-1/prA1-1996 |
电气绝缘用柔软复合材料第1部分：定义和一般要求修改草案１ |
Draft amendment 1 to IEC 626-1: Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements |
| prEN 60641-2-2002 |
电工用压纸板和薄纸板规范板第２部分：试验方法 |
IEC 60641-2, Ed. 2: Pressboard and presspaper for electrical purposes - Part 2: Methods of test |
| prEN 60669-2-1-2002 |
家用和类似电气设备用开关第２部分：特殊要求第１节：电子开关 （草案） |
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements; Electronic switches (IEC 60669-2-1:200X - (23B/668/FDIS), modified) |
| prEN 60669-2-4-2002 |
家用和类似用途的固定电器设备开关第2-4部分：特殊要求阻断开关 |
Switches for household and similar fixed-electrical installations - Part 2-4: Particular requirements; Isolating switches |
| prEN 6067-2000 |
航空航天系列快释自保持正锁双动轴销按扣操纵 |
Aerospace series - Pin, quick release, self-retaining, positive locking, double acting - Button handle |
| prEN 6068-2000 |
航空航天系列快释自保持正锁单动轴销按扣操纵 |
Aerospace series - Pin, quick release, self-retaining, positive locking, single acting - Button handle |
| prEN 60684-3-214-2000 |
绝缘软套管第3部分：各种型号软管规范活页214：热缩聚烯烴软管不阻燃收缩比3：1厚壁和中厚壁 |
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1; Thick and medium wall |
| prEN 60684-3-216-2000 |
绝缘软套管第3部分：各种型号软管规范活页216：热缩阻燃有限着火危险软管 |
IEC 60684-3-216: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 216: Heat-shrinkable, flame-retarded, limited fire hazard sleeving |
| prEN 6069-2001 |
航空航天系列紧公差100度轧制平头铆钉 英制系列 |
Aerospace series - Rivet, 100?reduced flush head, close tolerance - Inch series |
| prEN 60695-2-1-1992 |
着火危险试验2部分：试验方法第1节：热灯丝试验和指南 |
Fire hazard testing; part 2: test methods; section 1: glow-wire test and guidance (IEC 60695-2-1:1991) |
| prEN 60695-2-3-1995 |
着火危险试验第2部分：试验方法第3节：用发热器不良连接试验 |
Fire hazard testing - Part 2: Test methods - Bad-connection test with heaters (IEC 60695-2-3:1984) |
| prEN 6070-1998 |
航空航天系列铝和铝合金锻件技术规范通用要求 |
Aerospace series - Aluminium and aluminium alloy - Wrought products - Technical specification - General requirements |
| prEN 60704-2-6-2003 |
测定家用和类似用途电器辐射气载噪声的试验规范第2－6部分：滚筒式干衣机的特殊要求 草案 |
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers (IEC 60704-2-6:2003, modified) / Note: Intended as replacement for EN 60704-2-6 (1995-01). |
| prEN 6071-1998 |
航空航天系列铝和铝合金锻件技术规范中厚板 |
Aerospace series - Aluminium and aluminium alloy - Wrought products - Technical specification - Plate |
| prEN 6072-1998 |
航空航天系列金属材料试验方法恒振幅疲劳试验 |
Aerospace series - Metallic materials - Test methods - Constant amplitude fatique testing |
| prEN 60721-2-8-1993 |
环境条件分级第2部分：自然界出现的环境条件第8节：火辐射 |
Draft IEC 60721: classification of environmental conditions; part 2: environmental conditions appearing in nature; section 8: fire exposure |
| prEN 60728-6-2003 |
电视信号的电缆网络声音信号交互服务第６部分：光学装置 |
IEC 60728-6: Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
| prEN 6073-1998 |
航空航天系列金属材料铝和铝合金试验方法冲击试验 |
Aerospace series - Metallic materials - Aluminium and aluminium alloys - Test methods - Drop test |
| prEN 6074-1998 |
航空航天系列金属材料试验方法材料鉴定的统计数据 |
Aerospace series - Metallic materials - Test methods - Statistical data for material qualification |
| prEN 60745-2-12-2002 |
手持式电动工具的安全第２－１２部分：混凝土震动器的特殊要求草案 |
IEC 60745-2-12, Ed. 2: Safety of hand-held motor-operated electric tools - Part 2-12: Particular requirements for concrete vibrators |
| prEN 60745-2-18-2003 |
手持式电动工具的安全第２－１８部分：打包工具的特殊要求草案 |
Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools (IEC 60745-2-18:2003, modified) |
| prEN 60745-2-19-2002 |
手持式电动工具的安全第２－１９部分：长刨的特殊要求草案 |
Safety of hand-held motor-operated electric tools - Part 2-19: Particular requirements for jointers |
| prEN 60745-2-21-2001 |
手持式电动工具的安全第２－２１部分：排水沟清理机的特殊要求草案 |
IEC 60745-2-21, Ed. 1.0: Safety of hand-held motor-operated electric tools - Part 2-21: Particular requirements for drain cleaners |
| prEN 60749-26-2003 |
半导体器件机械和气候试验方法 第26部分： |
IEC 60749-26, Ed. 1: Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing; Human body model (HBM) |
| prEN 60749-27-2003 |
半导体器件机械和气候试验方法 第27部分： |
IEC 60749-27, Ed. 1: Semiconductor devices - Mechanical and climatic test methods - Part 27: Electrostatic discharge (ESD) sensitivity testing; Machine model (MM) |
| prEN 60749-29-2003 |
半导体器件机械和气候试验方法 第２７部分： |
IEC 60749-29, Ed. 1: Semiconductor devices - Mechanical and climatic test methods - Part 29: Latch-up test |
| prEN 60793-1-3-2000 |
光学纤维第１－３部分：总规范机械性能试验方法草案 |
Optical fibres - Part 1-3: Generic specification; Measuring methods for mechanical characteristics (IEC 60793-1-3:2000, modified) |
| prEN 60793-1-32-2001 |
光学纤维第1-32部分：测量方法和试验规程被覆层可剥性 草案 |
IEC 60793-1-32, Ed. 1: Optical fibres - Part 1-32: Measurement methods and test procedures; Coating strippability |
| prEN 60793-1-40-2001 |
光学纤维第１－４０部分：测量方法和试验规程衰减草案 |
IEC 60793-1-40, Ed. 1: Optical fibres - Part 1-40: Measurement methods and test procedures; Attenuation |
| prEN 60793-1-41-2003 |
光学纤维第１－４１部分：测量方法和试验规程带宽草案 |
IEC 60793-1-41, Ed. 2.0: Optical fibres - Part 1-41: Measurement methods and test procedures; Bandwidth |
| prEN 60793-1-45-2001 |
光学纤维第１－４５部分：测量方法和试验规程模场直径草案 |
IEC 60793-1-45, Ed. 1: Optical fibres - Part 1-45: Measurement methods and test procedures; Mode field diameter |
| prEN 60793-1-49-2003 |
光学纤维第１－４９部分：测量方法和试验规程 |
IEC 60793-1-49, Ed. 1.0: Optical fibres - Part 1-49: Measurement methods and test procedures; Differential mode delay |
| prEN 60794-4-1-1998 |
光学纤维电缆第４－１部分：高压输电线架空电缆 |
IEC 60794-4-1: Optical fibre cables - Part 4-1: Aerial optical cables for high voltage power lines |
| prEN 60794-4-2003 |
光学纤维电缆第４部分：高压输电线架空电缆 |
IEC 60794-4, Ed. 2.0: Optical fibre cables - Part 4: Sectional specification; Aerial optical cables along electrical power lines |
| prEN 6080-2001 |
航空航天系列紧公差100度标准平头铆钉 英制系列 |
Aerospace series - Rivet, 100?normal flush head, close tolerance - Inch series |
| prEN 6081-2001 |
航空航天系列通用头铆钉 英制系列 |
Aerospace series - Rivet; Universal head - Inch based series |
| prEN 60825-5-1992 |
激光产品的安全设备分类、要求和用户指南第5部分：光纤通信安全系统草案 |
Radiation safety of laser products; equipment classification, requirements, and users guide; part 5: the safety of optical fibre communications systems |
| prEN 60839-10-1-1994 |
报警系统第10部分：道路车辆用报警系统第1节：客车草案 |
Draft IEC 60839-10-1: Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger car |
| prEN 60839-2-7-1994 |
报警系统第2部分：入侵者报警系统的要求第7节：建筑物使用的玻璃断口状通过探测器草案 |
Draft IEC 60839-2-7: Alarm systems - Part 2: Requirements for intruder alarm systems - Section 7: Passive glass-break detectors for use in buildings |
| prEN 60839-7-1-2000 |
报警系统第7－1部分：报警传输系统中串行数据接口用报文格式和协议总则草案 |
Alarm systems - Part 7-1: Message formats and protocols for serial data interfaces in alarm transmission systems; General |
| prEN 60839-7-11-2000 |
报警系统第7－11部分：报警传输系统中串行数据接口用报文格式和协议使用ＩＴＵ建议Ｖ．２３在与ＰＳＴ |
Alarm systems - Part 7-11: Message formats and protocols for serial data interfaces in alarm transmission systems; Serial protocol for use by digital communicator systems using ITU-T V.23 signalling at interfaces with the PSTN |
| prEN 60839-7-12-2000 |
报警系统第7－12部分：报警传输系统中串行数据接口用报文格式和协议使用ＩＴＵ建议Ｖ．２３信令的专用 |
Alarm systems - Part 7-12: Message formats and protocols for serial data interfaces in alarm transmission systems; PTT interfaces for dedicated communications channels using ITU-T Recommendation V.23 signalling |
| prEN 60839-7-2-2000 |
报警系统第7－2部分：报警传输系统中串行数据接口用报文格式和协议公共应用层协议草案 |
Alarm systems - Part 7-2: Message formats and protocols for serial data interfaces in alarm transmission systems; Common application layer protocol |
| prEN 60839-7-20-2000 |
报警系统第7－20部分：报警传输系统中串行数据接口用报文格式和协议使用ＩＴＵ－Ｔ建议Ｖ．２４／Ｖ． |
Alarm systems - Part 7-20: Message formats and protocols for serial data interfaces in alarm transmission systems; Terminal interfaces employing ITU-T Recommendation V.24/V.28 signalling |
| prEN 60839-7-3-2000 |
报警系统第7－3部分：报警传输系统中串行数据接口用报文格式和协议公共数据链路层协议 草案 |
Alarm systems - Part 7-3: Message formats and protocols for serial data interfaces in alarm transmission systems; Common data link layer protocol |
| prEN 60839-7-4-2000 |
报警系统第7－4部分：报警传输系统中串行数据接口用报文格式和协议公共运输层协议草案 |
Alarm systems - Part 7-4: Message formats and protocols for serial data interfaces in alarm transmission systems; Common transport layer protocol |
| prEN 60839-7-5-2000 |
报警系统第7－5部分：报警传输系统中串行数据接口用报文格式和协议使用按ＩＳＯ／ＩＥＣ８４８２的二线 |
Alarm systems - Part 7-5: Message formats and protocols for serial data interfaces in alarm transmission systems; Alarm system interface employing a two-wire configuration in accordance with ISO/IEC 8482 |
| prEN 60839-7-6-2000 |
报警系统第7－6部分：报警传输系统中串行数据接口用报文格式和协议使用ＩＴＵ－Ｔ建议Ｖ．２４／Ｖ．２ |
Alarm systems - Part 7-6: Message formats and protocols for serial data interfaces in alarm transmission systems; Alarm system interfaces employing ITU-T Recommendation V.24/V.28 signalling |
| prEN 60839-7-7-2000 |
报警系统第7－7部分：报警传输系统中串行数据接口用报文格式和协议插入式报警系统收发信号机用报警系统 |
Alarm systems - Part 7-7: Message formats and protocols for serial data interfaces in alarm transmission systems; Alarm system interfaces for plug-in alarm system transceivers |
| prEN 6084-1999 |
航空航天系列非金属材料面膜技术规范通用要求 |
Aerospace series - Non-metallic materials - Surfacing films - Technical specification - General requirements |
| prEN 6085-1999 |
航空航天系列非金属材料环氧树脂面膜 |
Aerospace series - Non-metallic materials - Epoxy surfacing films |
| prEN 60850-1999 |
铁路设备牵引系统的供电电压 |
IEC 60850: Railway applications - Supply voltages of traction systems |
| prEN 60862-3-2003 |
声表面波（ＳＡＷ）滤波器第３部分：标准外形草案 |
Surface acoustic wave (SAW) filters of assessed quality - Part 3: Standard outlines |
| prEN 60865-1992 |
短路电流效应的计算草案 |
Short circuit currents; calculation of effects |
| prEN 60870-6-602-2000 |
遥控设备和系统第６部分：与ISO标准和ITU-T推荐规程一致的遥控协议第６０２节： |
Telecontrol equipment and systems - Part 6-602: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE transport profiles |
| prEN 60884-2-4-1992 |
(SELV)安全特低电压用插头插座的特殊要求 |
Draft IEC 60884-2-XX; part 2: particular requirements for plugs and socket-outlets for safety extra low voltage (SELV) |
| prEN 60884-2-5-1995 |
家用和类似用途的插头插座第2-5部分：接线板的特殊要求 |
Draft IEC 60884-2-5: Plug and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors |
| prEN 60884-2-6-1997 |
家用和类似用途的插头插座第2-6部分：固定设施用带连锁带开关插座的特殊要求 |
Draft IEC 60884-2-6: Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed installations |
| prEN 60893-1-2003 |
电工用热固性树脂基工业刚性层压板第1部分：定义、名称和一般要求草案 |
IEC 60893-1, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
| prEN 60893-2-2003 |
电工用热固性树脂基工业刚性层压板第２部分：试验方法 |
IEC 60893-2, Ed. 2: Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| prEN 60893-3-1-2003 |
电工用热固性树脂基工业刚性层压板第３部分： 专用材料规范活页１：工业硬质层压片类型 |
IEC 60893-3-1, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials; Requirements for types of industrial rigid laminated sheets / Note: |
| prEN 60893-3-2-2003 |
电工用热固性树脂基工业刚性层压板规范第３部分：专用材料规范活页２：环氧树脂基刚性层压板的要求 |
IEC 60893-3-2, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials; Requirements for rigid laminated sheets based on epoxy resins / Note |
| prEN 60893-3-3-2003 |
电工用热固性树脂基工业刚性层压板规范第３部分：专用材料规范活页３：对三聚氰胺树 脂硬质层压片的要 |
IEC 60893-3-3, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins / N |
| prEN 60893-3-4-2003 |
电工用热固性树脂基工业刚性层压板规范第3部分：专用材料规范第4活页：酚醛树脂基刚性层压板的要求 |
IEC 60893-3-4, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials; Requirements for rigid laminated sheets based on phenolic resins / N |
| prEN 60893-3-5-2003 |
电工用热固性树脂基工业刚性层压板规范第３部分：专用材料规范活页５：聚酯树脂基刚性层压薄板的要求 |
IEC 60893-3-5, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials; Requirements for rigid laminated sheets based on polyester resins / |
| prEN 60893-3-6-2003 |
电工用热固性树脂基工业刚性层压板规范第３部分：专用材料规范活页６：对硅氧烷树脂基刚性层压板的要求 |
IEC 60893-3-6, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials; Requirements for rigid laminated sheets based on silicone resins / N |
| prEN 60893-3-7-2003 |
电工用热固性树脂基工业刚性层压板规范第３部分：专用材料规范活页７：聚酰亚胺树脂基刚性层压薄板的要 |
IEC 60893-3-7, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials; Requirements for rigid laminated sheets based on polyimide resins / |
| prEN 60895-2002 |
在标称交流电压达到800KV时带电作业用的导电衣着 草案 |
Live working - Conductive clothing for use at nominal voltage up to 800 kV AC and ?00 kV DC |
| prEN 60896-21-2002 |
固定式铅酸蓄电池第21部分： |
IEC 60896-21, Ed. 1: Stationary lead-acid batteries - Part 21: Valve regulated types; Functional characteristics and methods of test |
| prEN 60898-2000 |
家用和类似用途电器过电流保护断路器规范 修改草案１ |
Revision of IEC 60898: Circuit-breakers for overcurrent protection for household and similar installations |
| prEN 60903-2002 |
生活用绝缘材料手套 |
Live working - Gloves of insulating material |
| prEN 60909-3-2003 |
三项交流系统短路第3部分：两个独立的同时单项对地短路、部分短路电流流入大地情况下的电流 |
IEC 60909-3: Short-circuit currents in three-phase a.c. systems - Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth |
| prEN 60921-2002 |
管形荧光灯镇流器性能要求 草案 |
Ballasts for tubular fluorescent lamps - Performance requirements |
| prEN 60929-2003 |
管形荧光灯用交流供电电子镇流器性能要求 |
AC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
| prEN 60952-1-2002 |
飞机用蓄电池组第1部分：一般试验要求和性能等级 草案 |
IEC 60952-1, Ed. 2: Aircraft batteries - Part 1: General test requirements and performance levels |
| prEN 60952-2-2002 |
飞机用蓄电池组第2部分：设计和制造要求草案 |
IEC 60952-2, Ed. 2: Aircraft batteries - Part 2: Design and construction requirements |
| prEN 60952-3-2002 |
飞机用蓄电池组第2部分：设计和制造要求草案 |
IEC 60952-3, Ed. 2: Aircraft batteries - Part 3: Product standard and verification |
| prEN 60958-4-2003 |
数字音频接口第４部分：专业类用途 草案 |
Digital audio interface - Part 4: Professional applications |
| prEN 60974-3-2003 |
电弧焊设备第３部分：电弧放电和稳定化处理 |
Arc welding equipment - Part 3: Arc striking and stabilizing devices |
| prEN 60989-1994 |
单独变压器自藕变压器、可变频率变压器和电抗器 |
Separating transformers, autotransformers, variable transformers and reactors (IEC 60989:1991, modified) |
| prEN 60998-2-1-2003 |
家用和类似用途低压电路连接设备第2－１部分：带螺旋式夹紧装置的独立机构连接装置的特殊要求 草案 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units (IEC 60998-2-1:2002, modified) / Note: Intended as replacement f |
| prEN 60998-2-2-2003 |
家用和类似用途低压电路连接器件第２－２部分：作为带有无螺丝型的夹紧器件的独立单的连接器件的特别要 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units (IEC 60998-2-2:2002, modified) / Note: Intended as replaceme |
| prEN 60998-2-3-2003 |
家用和类似用途低压电路连接器件第２－３部分：作为带有绝缘穿孔夹紧器件的独立单的连接器件草案 |
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulating piercing clamping units (IEC 60998-2-3:2002, modified) / Note: Intended as repl |
| prEN 60998-2-5-1995 |
家用和类似用途低压电路连接器件第2－5部分：端子和蔼连接器件用连接盒（接线和／或分接）的特殊要求 |
Draft IEC 998-2-5: Connecting devices for low-voltage circuits for household and similar purposes - Part 2-5: Particular requirements for connecting boxes (junction and/or tapping) for terminals or connecting devices |
| prEN 60998-2-5/prA1-1999 |
家用和类似用途低压电路连接器件第2－5部分：端子和蔼连接器件用连接盒（接线和／或分接）的特殊要求 |
Draft Amendment 1 to IEC 60998-2-5: Connecting devices for low-voltage circuits for household and similar purposes - Part 2-5: Particular requirements for connecting boxes (junction and/or tapping) for terminals or connecting devices |
| prEN 6100-2001 |
航空航天系列7050铝合金化学薄膜的100度埋头剪型冲模锁紧的紧公差销 |
Aerospace series - Pins, close tolerance, swage locking, 100?countersunk head shear type, in aluminium alloy 7050, chemical film - Inch series |
| prEN 61000-2-11-1999 |
电磁兼容性(EMC)第２部分：环境第１１节：HEMP环境分类 |
IEC 61000-2-11: Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMP environments |
| prEN 61000-2-24-1996 |
电磁兼容性(EMC) |
IEC 1000-4-24: Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance - Basic EMC publication |
| prEN 61000-3-12-2003 |
prEN 61000-3-12-2003 |
|
| prEN 61000-4-6-2003 |
电磁兼容(EMC)第４部分：技术测量和试验第６节：对射频场诱发的传导扰动的抗扰度 草案 |
Revision of IEC 61000-4-6: Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques; Immunity to conducted disturbances, induced by radio-frequency fields |
| prEN 61000-5-3-1998 |
电磁兼容性（ＥＭＣ）第５－３部分：安装和调试指南ＨＥＭＰ保护概念 |
Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMP protection concepts |
| prEN 61000-6-6-2003 |
电磁兼容性（ＥＭＣ）第６－６部分：通用标准ＨＥＭＰ室内设备的抗扰性 |
IEC 61000-6-6, Ed. 1: Electromagnetic compatibility (EMC) - Part 6-6: Generic standards; HEMP immunity for indoor equipment |
| prEN 61008-1-2003 |
家用和类似用途的没有综合过电流保护的剩余电流断路器（RCCBs）第１部分：通用规则 草案 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules (IEC 61008-1:1996 + A1:2002, modified) |
| prEN 61008-2-2-1993 |
家用和类似用途的没有综合过电流保护的剩余电流断路器（RCCBs）第２－２部分：通用规则对与功能上与线电压 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs); part 2-2: applicability of the general rules to RCCBs functionally dependent on line voltage (IEC 61008-2-2:1990) |
| prEN 61009-1-2003 |
家用和类似用途的有综合过电流保护的剩余电流断路器（RCCBs)第１部分：通用规则 草案 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules (IEC 61009-1:1996 + A1:2002, modified) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com