标准号 |
中文名称 |
英文名称 |
| EN ISO 12683-2004 |
机械镀锌涂层.规范和试验方法 |
|
| EN ISO 12687-1998 |
金属覆盖层孔隙率试验潮湿硫(硫化)试验 |
Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test (ISO 12687:1996) |
| EN ISO 12706-2000 |
无损检测术语穿透试验用术语 |
Non-destructive testing - Terminology - Terms used in penetrant testing (ISO 12706:2000) |
| EN ISO 12737-1999 |
金属材料平面变形断裂韧性的测定 |
Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:1996) |
| EN ISO 12777-1-1996 |
托盘连接件的试验方法第1部分：托盘用钉子、其他榫钉型紧固件和U形钉的抗弯试验 |
Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples (ISO 12777-1:1994) |
| EN ISO 12777-2-2000 |
托盘连接件的试验方法第2部分：托盘用钉子和U形钉的抗拉试验 |
Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000) |
| EN ISO 12777-3-2002 |
托盘连接件的试验方法第3部分：托盘连接件的强度测定 |
Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002) |
| EN ISO 128-20-2001 |
技术制图画法的一般原则第20部分：图线 |
Technical drawings - General principles of presentation - Part 20: Basic conventions for lines (ISO 128-20:1996) |
| EN ISO 128-21-2001 |
技术制图画法的一般原则第21部分：计算机辅助设计(CAD)系统用图线的表示 |
Technical drawings - General principles of presentation - Part 21: Preparation of lines by CAD systems (ISO 128-21:1997) |
| EN ISO 12864-1997 |
眼科光学隐形眼镜杂散光的测定 |
Ophthalmic optics - Contact lenses - Determination of scattered light (ISO 12864:1997) |
| EN ISO 12865-1998 |
眼科仪器检眼镜 |
Ophthalmic instruments - Retinoscopes (ISO 12865:1998) |
| EN ISO 12867-1998 |
眼科仪器试验架 |
Ophthalmic instruments - Trial frames (ISO 12867:1998) |
| EN ISO 12870-1997 |
眼科光学眼镜镜框一般要求和试验方法 |
Ophthalmic optics - Spectacle frames - General requirements and test methods (ISO 12870:1997) |
| EN ISO 12870-2004 |
眼科光学.眼镜架.要求和试验方法 |
|
| EN ISO 12894-2001 |
热环境的人类工效学暴露于极热或极冷环境时个人的医学观察 |
Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments (ISO 12894:2001) |
| EN ISO 12922-2002 |
润滑剂、工业润滑油和有关产品(L类)H组(液压系统)HFAE、HFAS、 HFB、 HFC、 HFDR 和HFDU各品种的规格(包 |
Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001) |
| EN ISO 12937-2000 |
石油产品水分的测定库仑卡尔·费休滴定法 |
Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
| EN ISO 12944-1-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第1部分：总则 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:1998) |
| EN ISO 12944-2-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第2部分：环境分类 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:1998) |
| EN ISO 12944-3-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第3部分：设计内容 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:1998) |
| EN ISO 12944-4-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第4部分：表面类型和表面处理 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types and surface preparation (ISO 12944-4:1998) |
| EN ISO 12944-5-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第5部分：防护漆体系 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:1998) |
| EN ISO 12944-6-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第6部分：实验室性能试验方法 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:1998) |
| EN ISO 12944-7-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第7部分：涂漆工艺的实施和管理 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:1998) |
| EN ISO 12944-8-1998 |
色漆和清漆防护漆体系对钢结构的腐蚀防护第8部分：新工艺和维修规范的开发 |
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:1998) |
| EN ISO 12945-1-2000 |
纺织品织物表面起球和起毛性的测定第1部分：起球箱法 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method (ISO 12945-1:2000) |
| EN ISO 12945-2-2000 |
纺织品织物表面起球和起毛性的测定第2部分：改型的马丁代尔仪法 |
Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method (ISO 12945-2:2000) |
| EN ISO 12947-1-1998 |
纺织品用马丁代尔(Martindale)法对织物抗磨损性的测定第1部分：马丁代尔耐磨实验仪 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus (ISO 12947-1:1998) |
| EN ISO 12947-2-1998 |
纺织品用马丁代尔(Martindale)法对织物抗磨损性的测定第2部分：试样破损的测定 |
Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:1998) |
| EN ISO 12947-3-1998 |
纺织品用马丁代尔(Martindale)法对织物抗磨损性的测定第3部分：质量损失的测定 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998) |
| EN ISO 12947-4-1998 |
纺织品用马丁代尔(Martindale)法对织物抗磨损性的测定第4部分：外观变化的评定 |
Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998) |
| EN ISO 12952-1-1998 |
纺织品床上用品的燃烧性能第1部分：由发烟燃烧的香烟为点火源的可点燃性的一般试验方法 |
Textiles - Burning behaviour of bedding items - Part 1: General test methods for the ignitability by a smouldering cigarette (ISO 12952-1:1998) |
| EN ISO 12952-2-1998 |
纺织品床上用品的燃烧性能第2部分：由发烟燃烧的香烟为点火源的可点燃性的特殊试验方法 |
Textiles - Burning behaviour of bedding items - Part 2: Specific test methods for the ignitability by a smouldering cigarette (ISO 12952-2:1998) |
| EN ISO 12952-3-1998 |
纺织品床上用品的燃烧性能第3部分：小点火源的可点燃性的一般试验方法 |
Textiles - Burning behaviour of bedding items - Part 3: General test methods for the ignitability by a small open flame (ISO 12952-3:1998) |
| EN ISO 12952-4-1998 |
纺织品床上用品的燃烧性能第4部分：小点火源的可点燃性的特殊试验方法 |
Textiles - Burning behaviour of bedding items - Part 4: Specific test methods for the ignitability by a small open flame (ISO 12952-4:1998) |
| EN ISO 12956-1999 |
土工布及相关产品特征孔径的测定 |
Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:1999) |
| EN ISO 12958-1999 |
土工布及相关产品平面内水流量的测定 |
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:1999) |
| EN ISO 13000-1-1997 |
塑料聚四氟乙烯(PTFE)半成品 第1部分：要求和命名 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:1997) |
| EN ISO 13000-2-1997 |
塑料聚四氟乙烯(PTFE)半成品 第2部分：试样的制备和性能的测定 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:1997) |
| EN ISO 13002-1998 |
碳纤维长丝纱命名体系 |
Carbon fibre - Designation system for filament yarns (ISO 13002:1998) |
| EN ISO 1302-2002 |
产品几何量技术规范(GPS)技术产品文件表面特征的表示 |
Geometrical Product specification (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
| EN ISO 1307-1995 |
一般工业用橡胶和塑料软管孔径和公差及长度公差 |
Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992) |
| EN ISO 13090-1-1998 |
机械振动与冲击试验及与人有关的实验安全方面指南第1部分：机械振动和反复冲击下的人体试验 |
Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998) |
| EN ISO 13212-1999 |
眼科光学隐形眼镜保护产品储存寿命的测定指南 |
Ophthalmic optics - Contact lens care products - Guidelines for the determination of shelf-life (ISO 13212:1999) |
| EN ISO 13230-1999 |
眼科光学条形码规范 |
Ophthalmic optics - Bar code specifications (ISO 13230:1999) |
| EN ISO 13294-1997 |
牙科手机牙钻气动机 |
Dental handpieces - Dental air-motors (ISO 13294:1997) |
| EN ISO 13295-1996 |
牙科旋转器械心轴 |
Dental rotary instruments - Mandrels (ISO 13295:1994) |
| EN ISO 13297-2000 |
小艇电气系统交流系统 |
Small craft - Electrical systems - Alternating current installations (ISO 13297:2000) |
| EN ISO 13337-1997 |
弹性圆柱销开槽、轻型 |
Spring-type straight pins - Slotted, light duty (ISO 13337:1997) |
| EN ISO 13340-2001 |
可运输气瓶不可再充填的气瓶用瓶阀规范和原型试验 |
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001) |
| EN ISO 13355-2003 |
包装 满装运输包装和单件货物 垂直随机振动试验 |
Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2001) |
| EN ISO 13366-1-1997 |
牛乳体细胞的菌落计数第1部分：镜检法 |
Milk - Enumeration of somatic cells - Part 1: Microscopic method (ISO 13366-1:1997) |
| EN ISO 13366-2-1997 |
牛乳体细胞的菌落计数第2部分：电子粒子计数法 |
Milk - Enumeration of somatic cells - Part 2: Electronic particle counter method (ISO 13366-2:1997) |
| EN ISO 13366-3-1997 |
牛乳体细胞的菌落计数第3部分：荧光光电法 |
Milk - Enumeration of somatic cells - Part 3: Fluoro-opto-electronic method (ISO 13366-3:1997) |
| EN ISO 13370-1998 |
建筑物热性能地面传热计算方法 |
Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:1998) |
| EN ISO 13395-1996 |
水质用流动分析(CFA 和FIA)和光谱检测法测定水中亚硝酸盐氮和硝酸盐氮及二者的总量 |
Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
| EN ISO 13397-1-1995 |
牙周 刮匙、牙刮器和牙挖器 第1部分：一般要求 |
Periodontal curettes, dental scalers and excavators - Part 1: General requirements (ISO 13397-1:1995) |
| EN ISO 13397-3-1996 |
牙周 刮匙、牙刮器和牙挖器 第3部分：牙刮器H型 |
Periodontal curettes, dental scalers and excavators - Part 3: Dental scalers - H-type (ISO 13397-3:1996) |
| EN ISO 13397-4-1997 |
牙周 刮匙、牙刮器和牙挖器 第4部分：牙挖器盘形 |
Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators - Discoid-type (ISO 13397-4:1997) |
| EN ISO 13402-2000 |
外科和牙科手持器械耐蒸汽消毒、耐腐蚀 和耐热性能的测定 |
Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995) |
| EN ISO 13406-1-1999 |
平板视觉显示工作的人类工效学要求第1部分：概述 |
Ergonomic requirements for work with visual display based on flat panels - Part 1: Introduction (ISO 13406-1:1999) |
| EN ISO 13406-2-2001 |
平板视觉显示工作的人类工效学要求第2部分：平板显示的人类工效学要求 |
Ergonomic requirements for work with visual displays based on flat panels - Part 2: Ergonomic requirements for flat panel displays (ISO 13406-2:2001) |
| EN ISO 13407-1999 |
以人为中心的交互系统设计过程 |
Human-centred design processes for interactive systems (ISO 13407:1999) |
| EN ISO 13426-1-2003 |
土工布及相关产品内部结构连接强度第1部分：土工格室 |
Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003) |
| EN ISO 13427-1998 |
土工布及相关产品磨损模拟(滑块试验) |
Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998) |
| EN ISO 13431-1999 |
土工布及相关产品拉伸蠕变和蠕变断裂的测定 |
Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999) |
| EN ISO 13437-1998 |
土工布及相关产品在土壤中安置和取出试样、并在实验室试验试样的方法 |
Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory (ISO 13437:1998) |
| EN ISO 13438-2004 |
土工织物和土工织物相关产品.测定耐氧化性的筛选试验方法 |
|
| EN ISO 1346-2004 |
纤维绳索.聚丙烯裂膜、单丝和多丝(PP2)及聚丙烯高弹性多丝(PP3)绳索.3、4和8股绳索 |
|
| EN ISO 13468-1-1996 |
塑料透明材料光透射率总量的测定第1部分：单束光发射仪器 |
Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996) |
| EN ISO 13473-1-2004 |
利用表面外观表征路面结构.第1部分:平均剖面高度的测定 |
|
| EN ISO 13478-1997 |
流体输送用热塑性塑料管材耐快速裂纹扩展(RCP)的测定全尺寸试验(FST) |
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:1997) |
| EN ISO 13479-1997 |
流体输送用聚稀烃管材抗裂纹扩展的测定切口管材慢速裂纹增长的试验(切口试验) |
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test) (ISO 13479:1997) |
| EN ISO 13485-2003 |
医疗器械 质量管理体系管理用途的要求 |
Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2003) |
| EN ISO 13500-1998 |
石油和天然气工业钻井液体材料规范和测试 |
Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:1998) |
| EN ISO 13533-2001 |
石油和天然气工业钻井和生产设备钻孔设备 |
Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment (ISO 13533:2001) |
| EN ISO 13534-2000 |
石油和天然气工业钻井和生产设备提升设备的检查、维护、修理和再制造 |
Petroleum and natural gas industries - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment (ISO 13534:2000) |
| EN ISO 13535-2000 |
石油和天然气工业钻井和生产设备提升设备 |
Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000) |
| EN ISO 13565-1-1997 |
产品几何量技术规范(GPS)表面结构：轮廓法具有分层功能特性的表面第1部分：滤波和一般测量条件 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996) |
| EN ISO 13565-2-1997 |
产品几何量技术规范(GPS)表面结构：轮廓法具有分层功能特性的表面第2部分：利用线性材料比率曲线描述 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996) |
| EN ISO 13565-3-2000 |
产品几何量技术规范(GPS)表面结构：轮廓法具有分层功能特性的表面第3部分：利用材料的概率曲线描述高 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998) |
| EN ISO 13567-1-2002 |
技术产品文件计算机辅助设计(CAD)图层的编排和命名第1部分：综述和原则 |
Technical product documentation - Organization and naming of layers for CAD - Part 1: Overview and principles (ISO 13567-1:1998) |
| EN ISO 13567-2-2002 |
技术产品文件计算机辅助设计(CAD)图层的编排和命名第2部分：用于建筑工程文件的概念、格式和代码 |
Technical product documentation - Organization and naming of layers for CAD - Part 2: Concepts, format and codes used in construction documentation (ISO 13567-2:1998) |
| EN ISO 13625-2002 |
石油和天然气工业 钻探和开采设备 海洋钻机提升机联结器 |
Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
| EN ISO 13628-1-1999 |
石油和天然气工业水下采油系统的设计和操作第1部分：一般要求和建议 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations (ISO 13628-1:1999) |
| EN ISO 13628-2-2000 |
石油和天然气工业水下采油系统的设计和操作第2部分：海底和海洋设备用软管系统 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000) |
| EN ISO 13628-3-2000 |
石油和天然气工业水下采油系统的设计和操作第3部分：通流线系统 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000) |
| EN ISO 13628-4-1999 |
石油和天然气工业水下采油系统的设计和操作第4部分：井口和采油树设备 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999) |
| EN ISO 13631-2002 |
石油和天然气工业整装往复式气体压缩机 |
Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
| EN ISO 13666-1998 |
眼科光学眼镜镜片 |
Ophthalmic optics - Spectacle lenses - Vocabulary (ISO 13666:1998) |
| EN ISO 13680-2001 |
石油和天然气工业用作套管、油管和接箍的防腐合金无缝钢管交货技术条件 |
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000) |
| EN ISO 13691-2002 |
石油和天然气工业特殊用途高速齿轮装置 |
Petroleum and natural gas industries - High-speed special purpose gear units (ISO 13691:2001) |
| EN ISO 13694-2000 |
光学和光学仪器激光和激光设备激光束能量密度分布的试验方法 |
Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution (ISO 13694:2000) |
| EN ISO 13695-2004 |
光学和光子学.激光及其相关设备.激光光谱特性的试验方法 |
|
| EN ISO 13696-2002 |
光学和光学仪器光学部件扩散引起的光辐射的试验方法 |
Optics and optical instruments - Test methods for radiation scattered by optical components (ISO 13696:2002) |
| EN ISO 13702-1999 |
石油和天然气工业对海上开发安装中着火和爆炸的控制和减弱要求和指南 |
Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999) |
| EN ISO 13703-2000 |
石油和天然气工业海上开采平台上管道系统的设计和安装 |
Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms (ISO 13703:2000) |
| EN ISO 13705-2001 |
石油和天然气工业一般炼油厂的烧火的加热器 |
Petroleum and natural gas industries - Fired heaters for general refinery service (ISO 13705:2001) |
| EN ISO 13706-2000 |
石油和天然气工业风冷热交换器 |
Petroleum and natural gas industries - Air-cooled heat exchangers (ISO 13706:2000) |
| EN ISO 13710-2004 |
石油、石油化学和天然气工业.往复式变容真空泵 |
|
| EN ISO 13716-2000 |
牙科学可逆和不可逆水解胶体印模材料系统 |
Dentistry - Reversible-irreversible hydrocolloid impression material systems (ISO 13716:1999) |
| EN ISO 13731-2001 |
热环境的人类工效学词汇和符号 |
Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001) |
| EN ISO 13734-2000 |
天然气有机硫化物添味剂要求和试验方法 |
Natural gas - Organic sulfur compounds used as odorants - Requirements and test methods (ISO 13734:1998) |
| EN ISO 13736-1997 |
石油产品和其他液体闪点的测定阿贝尔闭口杯法 |
Petroleum products and other liquids - Determination of flash point - Abel closed cup method (ISO 13736:1997) |
| EN ISO 13753-1998 |
机械振动与冲动手臂振动手臂系统为负载时弹性材料振动传递率的测量方法 |
Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) |
| EN ISO 13757-1996 |
液化石油气油残余物的测定高温法 |
Liquefied petroleum gases - Determination of oily residues - High-temperature method (ISO 13757:1996) |
| EN ISO 13758-1996 |
液化石油气评价丙烷干燥度阀冻结法 |
Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996) |
| EN ISO 13759-1996 |
石油产品柴油中硝酸烷基酯含量的测定分光光度法 |
Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996) |
| EN ISO 13760-1998 |
流体输送用塑料压力管材Miner规则累积破坏的计算方法 |
Plastics pipes for the conveyance of fluids under pressure - Miners rule - Calculation method for cumulative damage (ISO 13760:1998) |
| EN ISO 13783-1997 |
塑料管道系统硬聚氯乙烯(PVC-U)端部承受负荷的双承口连接件密封和承受弯曲及内压的试验方法 |
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997) |
| EN ISO 13786-1999 |
建筑部件热性能动态热特征计算方法 |
Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:1999) |
| EN ISO 13787-2003 |
建筑物设备和工业设备用隔热产品申报的热传导性的测定 |
Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003) |
| EN ISO 13788-2001 |
建筑构件和件的湿热性能避免严重的表面潮湿和间隙式冷凝的内表温度计算方法 |
Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation method (ISO 13788:2001) |
| EN ISO 13789-1999 |
建筑物热性能热损失系数计算方法 |
Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999) |
| EN ISO 13790-2004 |
建筑物的热性能.房间取暖用能量的计算 |
|
| EN ISO 13791-2004 |
建筑物的热性能.夏季无机械通风冷却时房间内部温度的计算.通用标准和确认程序 |
|
| EN ISO 13793-2001 |
建筑物热性能地基防冻胀的热设计 |
Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001) |
| EN ISO 13803-2004 |
色漆和清漆.20?漆膜反射光泽度的测定 |
|
| EN ISO 13844-2000 |
塑料管道系统用于硬(聚氯乙烯)(PVC-U) 管道的弹性密封环式承口连接件负压下密封试验方法 |
Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000) |
| EN ISO 13845-2000 |
塑料管道系统用于硬(聚氯乙烯)(PVC-U) 管道的弹性密封环式承口连接件内压下角度偏转密封试验方法 |
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com