标准号 |
中文名称 |
英文名称 |
| ISO 105-X02-1993 |
纺织品.色牢度试验.第X02部分:碳化色牢度.硫酸法 |
(Textiles; tests for colour fastness; part X02: colour fastness to carbonizing: sulfuric acid) |
| ISO 105-X04-1994 |
纺织品.色牢度试验.第X04部分:色牢度的丝光处理 |
(Textiles - Tests for colour fastness - Part X04: Colour fastness to mercerizing) |
| ISO 105-X05-1994 |
纺织品.染色牢度试验.第X05部分:有机溶剂的染色牢度 |
(Textiles - Tests for colour fastness - Part X05: Colour fastness to organic solvents) |
| ISO 105-X06-1994 |
纺织品.染色牢度试验.第X06部分:碱煮的染色牢度 |
(Textiles - Tests for colour fastness - Part X06: Colour fastness to soda boiling) |
| ISO 105-X07-1994 |
纺织品.染色牢度试验.第X07部分:交染的染色牢度:羊毛 |
(Textiles - Tests for colour fastness - Part X07: Colour fastness to cross-dyeing: Wool) |
| ISO 105-X08-1994 |
纺织品.染色牢度试验.第X08部分:脱胶的染色牢度 |
(Textiles - Tests for colour fastness - Part X08: Colour fastness to degumming) |
| ISO 105-X09-1993 |
纺织品.色牢度试验.第X09部分:耐甲醛色牢度 |
(Textiles; tests for colour fastness; part X09: colour fastness to formaldehyde) |
| ISO 105-X10-1993 |
纺织品.色牢度试验.第X010部分:织物颜色向聚乙烯涂层迁移的评定 |
(Textiles; tests for colour fastness; part X10: assessment of migration of textile colours into polyvinyl chloride coatings) |
| ISO 105-X11-1994 |
纺织品.染色牢度试验.第X11部分:热压染色牢度 |
(Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing) |
| ISO 105-X12-2001 |
纺织品.色牢度试验.第X12部分:耐摩擦色牢度 |
(Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing) |
| ISO 105-X13-1994 |
折缝、打锏及镶嵌用化学方法对羊毛染色的染色牢度 |
(Textiles - Tests for colour fastness - Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting) |
| ISO 105-X14-1994 |
纺织品.染色牢度试验.第X14部分:羊毛酸性氯化的染色牢度:二氯异氢尿酸钠 |
(Textiles - Tests for colour fastness - Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate) |
| ISO 105-X16-2001 |
纺织品.色牢度试验.第X16部分:耐摩擦色牢度.小面积 |
(Textiles - Tests for colour fastness - Part X16: Colour fastness to rubbing; Small areas) |
| ISO 105-Z01-1993 |
纺织品.色牢度试验.第Z01部分:耐染浴中金属的色牢度.铬盐 |
(Textiles; tests for colour fastness; part Z01: colour fastness to metals in the dye-bath; chromium salts) |
| ISO 105-Z02-1993 |
纺织品.色牢度试验.第Z02部分:耐染浴中金属的色牢度.铁和铜 |
(Textiles; tests for colour fastness; part Z02: colour fastness to metals in the dye-bath; iron and copper) |
| ISO 105-Z03-1996 |
纺织品.色牢度试验.第Z03部分:聚丙烯腈纤维用基本染料的互溶性 |
(Textiles - Tests for colour fastness - Part Z03: Intercompatibility of basic dyes for acrylic fibres) |
| ISO 105-Z04-1995 |
纺织品.色牢度试验.第Z04部分:分散染料的分散性 |
(Textiles - Tests for colour fastness - Part Z04: Dispersibility of disperse dyes) |
| ISO 105-Z05-1996 |
纺织品.染色牢度试验.第Z05部分:染料粉化作用的测定 |
(Textiles - Tests for colour fastness - Part Z05: Determination of the dusting behaviour of dyes) |
| ISO 105-Z06-1998 |
纺织品.染色牢度试验.第Z06部分:染料和颜料退色的评价 |
(Textiles - Tests for colour fastness - Part Z06: Evaluation of dye and pigment migration) |
| ISO 105-Z07-1995 |
纺织品.色牢度试验.第Z07部分:水溶性染料的溶解稳定性和实用溶解度的测定 |
(Textiles - Tests for colour fastness - Part Z07: Determination of application solubility and solution stability of water-soluble dyes) |
| ISO 105-Z08-1995 |
纺织品.色牢度试验.第Z08部分:活性染料的溶解稳定性和溶解度的测定 |
(Textiles - Tests for colour fastness - Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes) |
| ISO 105-Z09-1995 |
纺织品.色牢度试验.第Z09部分:水溶性染料的冷水溶解度的测定 |
(Textiles - Tests for colour fastness - Part Z09: Determination of cold water solubility of water-soluble dyes) |
| ISO 105-Z10-1997 |
纺织品.色牢度试验.第J01部分:溶液中染料相对色牢度的测定 |
(Textiles - Tests for colour fastness - Part Z10: Determination of relative colour strength of dyes in solution) |
| ISO 105-Z11-1998 |
纺织品.色牢度试验.第Z11部分:着色剂分散色斑的评价 |
(Textiles - Tests for colour fastness - Part Z11: Evaluation of speckiness of colorant dispersions) |
| ISO 1050-1975 |
松散物料的连续机械装卸设备.螺旋式输送机 |
(Continuous mechanical handling equipment for loose bulk materials; Screw conveyors) |
| ISO 10500-1991 |
工业用轮胎和轮辋.圆柱基和圆锥基橡胶实心轮胎(米制系列)命名、尺寸和标志 |
(Industrial tyres and rims; cylindrical and conical base rubber solid tyres (metric series); designation, dimensions and marking) |
| ISO 10502-1992 |
航空航天.最大温度为230℃,气压为10500KPa条件下使用的聚四氟乙烯(PTFE)软管组件.获得规范 |
(Aerospace; hose assemblies in polytetrafluoroethylene (PTFE) for use up to 232 C and 10500 kPa; procurement specification) |
| ISO 10504-1998 |
淀粉衍生物.葡萄糖浆、果糖浆和氢化葡萄糖浆的组成测定.高效液相法 |
(Starch derivates - Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups - Method using high-performance liquid chromatography) |
| ISO 10508-1995 |
输送热水和冷水系统的热塑性塑料管道及其配件 |
(Thermoplastics pipes and fittings for hot and cold water systems) |
| ISO 10509-1992 |
六角凸缘头自攻螺钉 |
(Hexagon flange head tapping screws) |
| ISO 1051-1999 |
铆钉杆直径 |
(Rivet shank diameters) |
| ISO 10510-1999 |
带有水平垫圈的攻螺丝螺纹和垫圈组件 |
(Tapping screw and washer assemblies with plain washers) |
| ISO 10511-1997 |
经常作用的扭矩型六角薄螺母(带有非金属插入物) |
(Prevailing torque type hexagon thin nuts (with non-metallic insert)) |
| ISO 10512-1997 |
带米制细牙间距螺纹的、类型1、经常作用的扭矩型六角螺母(带有非金属插入物).特性等级6,8和10 |
(Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10) |
| ISO 10513-1997 |
长效扭矩式全金属六角螺母 |
(Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread - Property classes 8, 10 and 12) |
| ISO 10517-1993 |
手提式电动树篱修剪机.定义,机械安全要求和试验 |
(Portable powered hedge trimmers; definitions, mechanical safety requirements and tests) |
| ISO 10518 AMD 1-1994 |
手扶式草地修剪机和草地边缘修剪机.机械的安全要求和试验方法.修改件1 |
(Powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety requirements and test methods - Amendment 1) |
| ISO 10518-1991 |
手扶式草地修剪机和草地边缘修剪机.机械的安全要求和试验方法 |
(Powered walk-behind and hand-held lawn trimmers and lawn edge trimmers; mechanical safety requirements and test methods) |
| ISO 10519-1997 |
油菜种子.叶绿素含量测定.光谱法 |
(Rapeseed - Determination of chlorophyll content - Spectrometric method) |
| ISO 1052-1982 |
一般工程用钢 |
(Steels for general engineering purposes) |
| ISO 10520-1997 |
本地淀粉.淀粉含量的测定.大口水罐抛光法 |
(Native starch - Determination of starch content - Ewers polarimetric method) |
| ISO 10521-1992 |
机动车辆道路阻力加载.在基准大气条件下和底盘测功计再现条件下的测定 |
(Motor vehicle road load; determination under reference atmospheric conditions and reproduction on chassis dynamometer) |
| ISO 10523-1994 |
水质.pH值测定 |
(Water quality - Determination of pH) |
| ISO 10524 Technical Corrigendum 1-1996 |
医用气体设备用有流量测量设备的压力调节器及压力调节器.技术勘误表白 |
(Pressure regulators and pressure regulators with flow-metering devices for medical gas systems; Technical Corrigendum 1) |
| ISO 10524-1995 |
医用气体设备用有流量测量设备的压力调节器及压力调节器 |
(Pressure regulators and pressure regulators with flow-metering devices for medical gas systems) |
| ISO 10525-1997 |
6m(20ft)长及以上的装卸货运集装箱用平衡重叉车.附加稳定性试验 |
(Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above - Additional stability tests) |
| ISO 10526-1999 |
比色法用CIE标准光源 |
(CIE standard illuminants for colorimetry) |
| ISO 10528-1995 |
纺织品.织物燃烧试验前的工业洗涤方法 |
(Textiles - Commercial laundering procedure for textile fabrics prior to flammability testing) |
| ISO 1053-1975 |
锌.铜含量的测定.分光光度法 |
(Zinc; Determination of copper content; Spectrophotometric method) |
| ISO 10530-1992 |
水质.溶解硫化物测定.使用钼蓝光度法 |
(Water quality; determination of dissolved sulfide; photometric method using methylene blue) |
| ISO 10531-1992 |
包装.满装的运输包装.成组货件稳定性试验 |
(Packaging; complete, filled transport packages; stability testing of unit loads) |
| ISO 10532 AMD 1-2004 |
土方机械.机械悬挂补偿装置.性能要求.修改件1 |
|
| ISO 10532 AMD 1-2004 |
土方机械.机械悬挂补偿装置.性能要求.修改件1 |
|
| ISO 10532-1995 |
土方机械.机械悬挂补偿设备.性能要求 |
(Earth-moving machinery - Machine-mounted retrieval device - Performance requirements) |
| ISO 10533-1993 |
土方机械.吊臂承重装置 |
(Earth-moving machinery; lift-arm support devices) |
| ISO 10534-1-1996 |
声学.阻抗管中吸声系数和阻抗的测定.第1部分:使用驻波比的方法 |
(Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 1: Method using standing wave ratio) |
| ISO 10534-2-1998 |
声学.阻抗管中吸声系数和阻抗的测定.第2部分:传递函数法 |
(Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer-function method) |
| ISO 10535-1998 |
残疾人运送用提升机.要求和试验方法 |
(Hoists for the transfer of disabled persons - Requirements and test methods) |
| ISO 10539-2002 |
动植物脂肪和油.强碱性测定 |
(Animal and vegetable fats and oils - Determination of alkalinity) |
| ISO 1054-1975 |
锌.镉含量的测定.极谱法 |
(Zinc; Determination of cadmium content; Polarographic method) |
| ISO 10540-1-2003 |
动植物油和脂肪.磷含量测定.第1部分:比色测定法 |
(Animal and vegetable fats and oils - Determination of phosphorus content - Part 1: Colorimetric method) |
| ISO 10540-1-2003 |
动植物油和脂肪.磷含量测定.第1部分:比色测定法 |
|
| ISO 10540-2-2003 |
动植物油和脂肪.磷含量测定.第2部分:石墨炉原子吸收光谱法 |
(Animal and vegetable fats and oils - Determination of phosphorus content - Part 2: Method using graphite furnace atomic absorption spectrometry) |
| ISO 10540-2-2003 |
动植物油和脂肪.磷含量测定.第2部分:石墨炉原子吸收光谱法 |
|
| ISO 10540-3-2002 |
动植物脂肪和油.磷含量测定.第3部分:感应耦合等离子体光辐射分光光度测定法 |
(Animal and vegetable fats and oils - Determination of phosphorus content - Part 3: Method using inductively coupled plasma (ICP) optical emission spectroscopy) |
| ISO 10542-1-2001 |
残疾人技术系统和辅助器具.轮椅系紧和轮椅使用者减震系统.第1部分:所有系统的要求和试验方法 |
(Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 1: Requirements and test methods for all systems) |
| ISO 10542-2-2001 |
残疾人技术系统和辅助器具.轮椅系紧和轮椅使用者减震系统.第2部分:四点带条式系紧系统 |
(Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 2: Four-point strap-type tiedown systems) |
| ISO 10542-4-2004 |
残疾人或行动障碍人用技术系统和辅助设备.轮椅系固装置和乘车人约束系统.第4部分:夹紧式系固装置 |
|
| ISO 10542-5-2004 |
残疾人或行动障碍人用技术设备和辅助装置.轮椅系固装置和乘车人安全束护系统.第5部分:专门轮椅设备 |
|
| ISO 10544-1992 |
焊接钢筋网制造和混凝土增强用冷轧钢丝 |
(Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric) |
| ISO 10545-1-1995 |
瓷砖.第1部分:抽样和验收基础 |
(Ceramic tiles - Part 1: Sampling and basis for acceptance) |
| ISO 10545-10-1995 |
瓷砖.第10部分:上釉面砖湿膨胀率的测量 |
(Ceramic tiles - Part 10: Determination of moisture expansion) |
| ISO 10545-11-1994 |
瓷砖.第11部分:上釉面砖抗碎裂的测量 |
(Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles) |
| ISO 10545-12 Technical Corrigendum 1-1997 |
瓷砖.第12部分:上釉面砖耐霜冻性的测量.技术勘误表1 |
(Ceramic tiles - Part 12: Determination of frost resistance; Technical Corrigendum 1) |
| ISO 10545-12-1995 |
瓷砖.第12部分:上釉面砖耐霜冻性的测量 |
(Ceramic tiles - Part 12: Determination of frost resistance) |
| ISO 10545-13-1995 |
瓷砖.第十三部分:抗化学腐蚀的测定 |
(Ceramic tiles - Part 13: Determination of chemical resistance) |
| ISO 10545-14 Technical Corrigendum 1-1997 |
瓷砖.第14部分:上釉面砖耐沾污性的测量.技术勘误表1 |
(Ceramic tiles - Part 14: Determination of resistance to stains; Technical Corrigendum 1) |
| ISO 10545-14-1995 |
瓷砖.第14部分:上釉面砖耐沾污性的测量 |
(Ceramic tiles - Part 14: Determination of resistance to stains) |
| ISO 10545-15-1995 |
瓷砖.第十五部分:釉面砖镉含量测定 |
(Ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles) |
| ISO 10545-16-1999 |
瓷砖.第16部分:细小色差的测定 |
(Ceramic tiles - Part 16: Determination of small colour differences) |
| ISO 10545-2 Technical Corrigendum 1-1997 |
瓷砖.第2部分:表面质量和尺寸的测定.技术勘误表1 |
(Ceramic tiles - Part 2: Determination of dimensions and surface quality; Technical Corrigendum 1) |
| ISO 10545-2-1995 |
瓷砖.第二部分:表面质量和尺寸的测定 |
(Ceramic tiles - Part 2: Determination of dimensions and surface quality) |
| ISO 10545-3 Technical Corrigendum 1-1997 |
瓷砖.第3部分:吸水率、外表孔隙率、外表相对密度和松密度的测量.技术勘误表1 |
(Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density; Technical Corrigendum 1) |
| ISO 10545-3-1995 |
瓷砖.第3部分:吸水率、外表孔隙率、外表相对密度和松密度的测量 |
(Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density) |
| ISO 10545-4-1994 |
瓷砖.第4部分:断裂强度及破裂模数的测定 |
(Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength) |
| ISO 10545-4-2004 |
陶瓷砖.第4部分:断裂模数和抗断强度的测定 |
|
| ISO 10545-5 Technical Corrigendum 1-1997 |
瓷砖.第5部分:用复原系数测量法测定耐冲击系性.技术勘误表1 |
(Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution; Technical Corrigendum 1) |
| ISO 10545-5-1996 |
瓷砖.第5部分:用复原系数测量法测定耐冲击特性 |
(Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution) |
| ISO 10545-6-1995 |
瓷砖.第11部分:无釉面砖抗极度磨损的测量 |
(Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles) |
| ISO 10545-7-1996 |
瓷砖.第7部分:上釉瓷砖表面抗磨损性的测定 |
(Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles) |
| ISO 10545-8-1994 |
瓷砖.第8部分:线性热膨胀力的测定 |
(Ceramic tiles - Part 8: Determination of linear thermal expansion) |
| ISO 10545-9-1994 |
瓷砖.第9部分:耐热冲击力的测定 |
(Ceramic tiles - Part 9: Determination of resistance to thermal shock) |
| ISO 10545-9-2004 |
陶瓷砖.第4部分:抗热冲击的测定 |
|
| ISO 10546-1993 |
化学变化保护层.铝和铝合金上清洗和未清洗的铬酸盐变化保护层 |
(Chemical conversion coatings; rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys) |
| ISO 10548-2002 |
碳纤维.尺寸的测定 |
(Carbon fibre - Determination of size content) |
| ISO 10549-2000 |
缩微照相.A6尺寸穿孔卡片 |
(Micrographics - A6 size aperture cards) |
| ISO 1055-1975 |
锌和锌合金.铁含量的测定.分光光度法 |
(Zinc and zinc alloys; Determination of iron content; Spectrophotometric method) |
| ISO 10550-1994 |
缩微摄影技术.行星上用照相机系统.检验性能用试验目标 |
(Micrographics; planetary camera systems; test target for checking performance) |
| ISO 10551-1995 |
热环境中的人类工效学.使用主观判断尺度对热环境影响的评定 |
(Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales) |
| ISO 10552-1999 |
控时设备.帽和密封管.设计和尺寸 |
(Timekeeping instruments - Crowns and sealed tubes - Designs and dimensions) |
| ISO 10553-2003 |
钟表学.石英表精度评价规程 |
(Horology - Procedure for evaluationg the accuracy of quartz watches) |
| ISO 10553-2003 |
钟表学.石英表精度评价规程 |
|
| ISO 10555-1 AMD 1-1999 |
一次性使用、无菌管内导管.第1部分:一般要求.补充件1 |
(Sterile, single-use intravascular catheters - Part 1: General requirements; Amendment 1) |
| ISO 10555-1 AMD 2-2004 |
一次性使用无菌血管内导管.第1部分:一般要求.修改件2 |
|
| ISO 10555-1-1995 |
一次性使用、无菌管内导管.第1部分:一般要求 |
(Sterile, single-use intravascular catheters - Part 1: General requirements) |
| ISO 10555-2 Technical Corrigendum 1-2002 |
一次性使用无菌血管内导管.第2部分:血管造影术用导管.技术勘误1 |
(Sterile, single-use intravascular catheters - Part 2: Angiographic catheters; Technical Corrigendum 1) |
| ISO 10555-2-1996 |
一次性使用、无菌管内导管.第2部分:血管造影术用导管 |
(Sterile, single-use intravascular catheters - Part 2: Angiographic catheters) |
| ISO 10555-3 Technical Corrigendum 1-2002 |
一次性使用无菌血管内导管.第3部分:中心静脉导管.技术勘误1 |
(Sterile, single-use intravascular catheters - Part 3: Central venous catheters; Technical Corrigendum 1) |
| ISO 10555-3-1996 |
一次性使用、无菌管内导管.第3部分:中心静脉导管 |
(Sterile, single-use intravascular catheters - Part 3: Central venous catheters) |
| ISO 10555-4 Technical Corrigendum 1-2002 |
一次性使用无菌血管内导管.第4部分:球形扩张导管.技术勘误1 |
(Sterile, single-use intravascular catheters - Part 4: Balloon dilatation catheters; Technical Corrigendum 1) |
| ISO 10555-4-1996 |
一次性使用、无菌管内导管.第4部分:球形扩张导管 |
(Sterile, single-use intravascular catheters - Part 4: Balloon dilatation catheters) |
| ISO 10555-5 AMD 1-1999 |
一次性使用、无菌管内导管.第5部分:与针头相连的辅助导管.补充件1 |
(Sterile, single-use intravascular catheters - Part 5: Over-needle peripheral catheters; Amendment 1) |
| ISO 10555-5 Technical Corrigendum 1-2002 |
一次性使用无菌血管内导管.第5部分:与针头相连的外部导管.技术勘误1 |
(Sterile, single-use intravascular catheters - Part 5: Over-needle peripheral catheters; Technical Corrigendum 1) |
| ISO 10555-5-1996 |
一次性使用、无菌管内导管.第5部分:与针头相连的辅助导管 |
(Sterile, single-use intravascular catheters - Part 5: Over-needle peripheral catheters) |
| ISO 10560 Technical Corrigendum 1-1994 |
奶乳和乳制品.单核细胞增多性李司忒氏菌的检验.技术勘误1 |
(Milk and milk products; detection of listeria monocytogenes; technical corrigendum 1) |
| ISO 10560-1993 |
奶乳和乳制品.单核细胞增多性李司忒氏菌的检验 |
(Milk and milk products; detection of listeria monocytogenes) |
| ISO 10563-1991 |
建筑结构.接合用密封料.测定重量和体积的变化 |
(Building construction; sealants for joints; determination of change in mass and volume) |
| ISO 10564-1993 |
软钎焊材料和硬焊材料.软焊料分析取样方法 |
(Soldering and brazing materials; methods for the sampling of soft solders for analysis) |
| ISO 10565-1998 |
油料种子.油和水分含量的同时测定.脉冲核磁共振谱测定法 |
(Oilseeds - Simultaneous determination of oil and water contents - Method using pulsed nuclear magnetic resonance spectrometry) |
| ISO 10566-1994 |
水质.用邻苯二酚紫光谱测定法测定铝 |
(Water quality - Determination of aluminium - Spectrometric method using pyrocatechol violet) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com