标准号 |
中文名称 |
英文名称 |
ISO 16091-2002 |
航天系统.统一的后勤支援 |
Space systems - Integrated logistic support |
ISO 161-1-1996 |
流体输送用热塑性塑料管材.公称外径和公称压力.第1部分:米制系列 |
Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Part 1: Metric series |
ISO 161-2-1996 |
输送流体用热塑塑料管.公称外径和公称压力.第2部分:英制系列 |
Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Part 2: Inch-based series |
ISO 16100-1-2002 |
工业自动化系统和集成.交替使用性的软件生产能力.第1部分:框架 |
Industrial automation systems and integration - Manufacturing software capability for interoperability - Part 1: Framework |
ISO 16100-2-2003 |
工业自动化系统和集成.交替使用性的软件生产能力轮廓.第2部分:轮廓编制法 |
(Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 2: Profiling methodology) |
ISO 16100-2-2003 |
工业自动化系统和集成.交替使用性的软件生产能力轮廓.第2部分:轮廓编制法 |
|
ISO 16101-2004 |
包装.危险货物的运输包装.塑料兼容性试验 |
|
ISO 16104-2003 |
包装.危险物品的运输包装.试验方法 |
(Packaging - Transport packaging for dangerous goods - Test methods) |
ISO 16104-2003 |
包装.危险物品的运输包装.试验方法 |
|
ISO 16107-1999 |
工作场所空气.普及型取样器的性能评估协议 |
Workplace atmospheres - Protocol for evaluating the performance of diffusive samplers |
ISO 16120-1-2001 |
转换金属丝用非合金钢线材.第1部分:一般要求 |
Non-alloy steel wire rod for conversion to wire - Part 1: General requirements |
ISO 16120-2-2001 |
转换金属丝用非合金钢线材.第2部分:通用金属线特殊要求 |
Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod |
ISO 16120-3-2001 |
转换金属丝用非合金钢线材.第3部分:沸腾和沸腾替代低碳钢金属线特殊要求 |
Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod |
ISO 16120-4-2001 |
转换金属丝用非合金钢线材.第4部分:特殊用途金属线的特殊要求 |
Non-alloy steel wire rod for conversion to wire - Part 4: Specific requirements for wire rod for special applications |
ISO 16124-2004 |
钢丝棒.尺寸和公差 |
|
ISO 16132-2004 |
球墨铸铁管和配件.水泥灰浆衬套的封装层 |
|
ISO 16133-2004 |
土壤质量.监测程序的建立和维护指南 |
|
ISO 1614-1976 |
工业用甘油.试样和试验方法.总则 |
Glycerines for industrial use; Samples and test methods; General |
ISO 16140-2003 |
食品和动物饲料的微生物学.备用法验证协议 |
(Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods) |
ISO 16140-2003 |
食品和动物饲料的微生物学.备用法验证协议 |
|
ISO 16143-1-2004 |
通用不锈钢.第1部分:扁平制品 |
|
ISO 16143-2-2004 |
通用不锈钢.第2部分:半成品棒材、杆材和型材 |
|
ISO 16147-2002 |
小艇.艇内柴油发动机.装在发动机上的燃油和电气件 |
Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components |
ISO 1615-1976 |
工业用甘油.酸碱度的测定.滴定法 |
Glycerines for industrial use; Determination of alkalinity or acidity; Titrimetric method |
ISO 16156-2004 |
机床安全性.工件夹具用卡盘的设计和建造的安全性要求 |
|
ISO 1616-1976 |
工业用甘油.硫酸盐灰分的测定.重量法 |
Glycerines for industrial use; Determination of sulphated ash; Gravimetric method |
ISO 16160-2000 |
连续热轧钢薄板产品.尺寸和形状公差 |
Continuously hot-rolled steel sheet products - Dimensional and shape tolerances |
ISO 16162-2000 |
连续冷轧钢薄板产品.尺寸和形状公差 |
Continuously cold-rolled steel sheet products - Dimensional and shape tolerances |
ISO 16163-2000 |
连续热浸镀钢薄板产品.尺寸和形状公差 |
Continuously hot-dipped coated steel sheet products - Dimensional and shape tolerances |
ISO 16165-2001 |
船舶和海洋技术.海洋环境保护.与漏油反应有关术语 |
Ships and marine technology - Marine environment protection - Terminology relating to oil spill response |
ISO 1617-1976 |
金属铝生产用氧化铝.钠含量的测定.火焰发射分光光度法 |
Aluminium oxide primarily used for the production of aluminium; Determination of sodium content; Flame emission spectrophotometric method |
ISO 1618-1976 |
金属铝生产用氧化铝.钒含量的测定.N-苯甲酰-N-苯胲光度法 |
Aluminium oxide primarily used for the production of aluminium; Determination of vanadium content; N-Benzoyl-N-phenylhydroxylamine photometric method |
ISO 16183-2002 |
重型机车.未处理排气的气体排放测量和瞬变试验条件下用部分流体稀释系统测量粒子排放 |
Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions |
ISO 16185-2000 |
道路车辆.重型车辆检定用发动机系列.废气排放 |
Road vehicles - Engine families for certification of heavy-duty vehicles - Exhaust emissions |
ISO 1619-1976 |
天然和人造冰晶石.试验样品的制备和贮存 |
Cryolite, natural and artificial; Preparation and storage of test samples |
ISO 162-1985 |
电影技术.35mm磁片上三声轨.四声轨或六声轨和17.5mm磁片上单声轨录音磁头的缝隙和声带.位置和宽度尺寸 |
Cinematography; Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture; Positions and width dimensions |
ISO 1620-1976 |
天然和人造冰晶石.二氧化硅含量的测定.还原硅钼酸盐分光光度法 |
Cryolite, natural and artificial; Determination of silica content; Reduced molybdosilicate spectrophotometric method |
ISO 16200-1-2001 |
工作场所空气质量.用溶剂解析/气相色谱法对挥发性有机化合物的取样和分析.第1部分:抽吸取样法 |
Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1: Pumped sampling method |
ISO 16200-2-2000 |
工作场所空气质量.用溶剂解析和气相色谱法抽样和分析挥发性或有机化合物.第2部分:扩散抽样法 |
Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 2: Diffusive sampling method |
ISO 1622-1-1994 |
塑料.聚苯乙烯(PS)模塑和挤塑材料.第1部分:命名体系和基本规范 |
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
ISO 1622-2-1995 |
塑料-模塑材料.聚苯乙烯(PS)-模塑材料.性能的测定 |
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
ISO 16220 Technical Corrigendum 1-2000 |
镁和镁合金.镁合金铸锭和铸件.技术勘误1 |
Magnesium and magnesium alloys - Magnesium alloy ingots and castings; Technical Corrigendum 1 |
ISO 16220-2000 |
镁和镁合金.镁合金铸锭和铸件 |
Magnesium and magnesium alloys - Magnesium alloy ingots and castings |
ISO 16221-2001 |
水质.海洋环境中生物降解能力测定的指南 |
Water quality - Guidance for determination of biodegradability in the marine environment |
ISO 1624-2001 |
塑料.氯乙烯均聚物和共聚物树脂.水中筛析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water |
ISO 16247-2004 |
道路车辆.排气系统泄漏的检测.氦试验方法和探测装置规范 |
|
ISO 16264-2002 |
水质.用流量分析法(FIA 和 CFA)和光度计检测法测定可溶性硅酸盐 |
Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection |
ISO 16269-7-2001 |
数据的统计解释.第7部分:中位数.估计和置信区间 |
Statistical interpretation of data - Part 7: Median; Estimation and confidence intervals |
ISO 16269-8-2004 |
数据的统计说明.第8部分:预测差异的测定 |
|
ISO 16273-2003 |
船舶和海上技术.高速船舶用夜视设备.操作和性能要求、试验方法和要求的试验结果 |
(Ships and marine technology - Night vision equipment for high-speed craft - Operational and performance requirements, methods of testing and required test results ) |
ISO 16273-2003 |
船舶和海上技术.高速船舶用夜视设备.操作和性能要求、试验方法和要求的试验结果 |
|
ISO 1628-1-1998 |
塑料.用毛细粘度计测定稀释溶液中聚合物的粘度值.第1部分:一般原理 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 1: General principles |
ISO 1628-2-1998 |
塑料.使用毛细管粘度计测定稀释溶液中聚合物的粘度.第2部分:聚氯乙烯树脂 |
Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins |
ISO 1628-3-2001 |
塑料.用毛细管粘度计测定稀薄溶液的粘度.第3部分:聚乙烯和聚丙烯 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes |
ISO 1628-4-1999 |
塑料.使用毛细管粘度计在稀释溶液中测定聚合物的粘度值.第4部分:聚碳酸酯(PC)模塑和挤塑材料 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate (PC) moulding and extrusion materials |
ISO 1628-5-1998 |
塑料.使用毛细管粘度计在稀溶液中测定聚合物的粘度.第5部分:热塑性聚酯均聚物和共聚物 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : Thermoplastic polyester (TP) homopolymers and copolymers |
ISO 1628-6-1990 |
塑料.粘度数和极限粘度数的测定.第6部分:甲基丙烯酸甲酯聚合物 |
Plastics; determination of viscosity number and limiting viscosity number; part 6: methyl methacrylate polymers |
ISO 16284-2001 |
眼科光学.眼科光学设备的信息交换 |
Ophthalmic optics - Information interchange for ophthalmic optical equipment |
ISO 1629-1995 |
橡胶和胶乳.命名 |
Rubbers and latices - Nomenclature |
ISO 16328-2001 |
船舶和海上技术.高速船舶用陀螺罗盘 |
Ships and marine technology - Gyro-compasses for high-speed craft |
ISO 16329-2003 |
船舶和海上技术.高速船舶的航向控制系统 |
(Ships and marine technology - Heading control systems for high-speed craft) |
ISO 16329-2003 |
船舶和海上技术.高速船舶的航向控制系统 |
|
ISO 16330-2003 |
往复式变容真空泵和泵装置.技术要求 |
(Reciprocating positive displacement pumps and pump units - Technical requirements) |
ISO 16330-2003 |
往复式变容真空泵和泵装置.技术要求 |
|
ISO 16333-2004 |
大型商用车辆和客车.稳态倾翻阈.倾斜台试验方法 |
|
ISO 16348-2003 |
金属和其他无机覆层.定义和外观约定 |
(Metallic and other inorganic coatings - Definitions and conventions concerning appearance) |
ISO 16348-2003 |
金属和其他无机覆层.定义和外观约定 |
|
ISO 16366-2001 |
冲压用设备.L形导向 |
Tools for pressing - L-shaped guides |
ISO 16367-2001 |
冲压用工具.导板.U形和V形块 |
Tools for pressing - Guide plates - U- and V-blocks |
ISO 16368-2003 |
移动式升降工作台.设计计算、安全要求和试验方法 |
(Mobile elevating work platforms - Design calculations, safety requirements and test methods) |
ISO 16368-2003 |
移动式升降工作台.设计计算、安全要求和试验方法 |
|
ISO 16369-2000 |
提升工作平台.爬升杆式工作平台 |
Elevating work platforms - Mast-climbing work platforms |
ISO 16387-2004 |
土壤质量.污染物对线蚓科的影响.对繁殖和存活率影响的测定 |
|
ISO 16391-2002 |
造口术和失禁辅助器具.冲洗设备.要求和试验方法 |
Aids for ostomy and incontinence - Irrigation sets - Requirements and test methods |
ISO 16408-2004 |
牙科学.口腔卫生制品.口腔冲洗 |
|
ISO 1641-1-1978 |
端铣刀和槽铣刀.第1部分:直柄铣刀 |
End mills and slot drills; Part I : Milling cutters with parallel shanks |
ISO 1641-1-2003 |
端铣刀和槽铣刀.第1部分:直柄铣刀 |
(End mills and slot drills - Part 1: Milling cutters with cylindrical shanks) |
ISO 1641-1-2003 |
端铣刀和槽铣刀.第1部分:直柄铣刀 |
|
ISO 1641-2-1978 |
端铣刀和槽铣刀.第2部分:莫氏锥柄铣刀 |
End mills and slot drills; Part II : Milling cutters with Morse taper shanks |
ISO 1641-3-1978 |
端铣刀和槽铣刀.第3部分:7/24锥柄铣刀 |
End mills and slot drills; Part III : Milling cutters with 7/24 taper shanks |
ISO 1641-3-2003 |
端铣刀和槽铣刀.第3部分:7/24锥柄铣刀 |
(End mills and slot drills - Part 3: Milling cutters with 7/24 taper shanks) |
ISO 1641-3-2003 |
端铣刀和槽铣刀.第3部分:7/24锥柄铣刀 |
|
ISO 16426-2002 |
紧固件.质量保证体系 |
Fasteners - Quality assurance system |
ISO 16429-2004 |
外科植入物.金属可植入材料和过期医疗设备的开放电路潜在腐蚀性能测量 |
|
ISO 16446-2002 |
船舶和航海技术.海洋环境保护.连接不同的臂式连接器的适配器 |
Ships and marine technology - Marine environmental protection - Adaptor for joining dissimilar boom connectors |
ISO 16458-2004 |
航天系统.不载人航天器运输.一般要求 |
|
ISO 16462-2004 |
镶片或实心立方形氮化硼镶齿.尺寸、类型 |
|
ISO 16463-2004 |
镶片多晶体金刚石镶齿.尺寸、类型 |
|
ISO 16467-2003 |
包装.危险品用运输包装件.IBCs用试验方法 |
(Packaging - Transport packages for dangerous goods - Test methods for IBCs) |
ISO 16467-2003 |
包装.危险品用运输包装件.IBCs用试验方法 |
|
ISO 16484-2-2004 |
建筑自动化和控制系统(BACS).第2部分:硬件 |
|
ISO 16484-5-2003 |
建筑自动化和控制系统.第5部分:数据通信协议 |
(Building automation and control systems - Part 5: Data communication protocol) |
ISO 16484-5-2003 |
建筑自动化和控制系统.第5部分:数据通信协议 |
|
ISO 1651 AMD 1-1982 |
第1次修改 |
Tube drawing mandrels; amendment 1 |
ISO 1651-1974 |
拔管心轴 |
Tube drawing mandrels |
ISO 1652-1985 |
橡胶胶乳.粘度的测定 |
Rubber latex; Determination of viscosity |
ISO 1652-2004 |
橡胶胶乳.用布洛氏布洛克菲尔德试验方法测定表观粘度 |
|
ISO 16549-2004 |
纺织物.纤维绳的不均匀性.容量法 |
|
ISO 1656-1996 |
天然生橡胶和天然橡胶胶乳.氮含量的测定 |
Rubber, raw natural, and rubber latex, natural - Determination of nitrogen content |
ISO 16564-2004 |
天然橡胶.由尺寸排除色谱法测定平均分子质量和分子质量分布 |
|
ISO 16565-2002 |
橡胶.乙烯-丙烯-二烯三共聚物中5-亚乙基-降冰片烯(ENB)或 二聚环戊二烯(DCPD) 的测定 |
Rubber - Determination of 5-ethylidenenorbonene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers |
ISO 1657-1986 |
生橡胶和橡胶胶乳.铁含量的测定.1,10非咯啉光度测量法 |
Rubber, raw and rubber latex; Determination of iron content; 1,10-Phenanthroline photometric method |
ISO 16582-2002 |
开口型盘头抽芯盲铆钉.Cu/St或Cu/Br或Cu/SSt |
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt |
ISO 16583-2002 |
开口型沉头抽芯盲铆钉.Cu/St或Cu/Br或Cu/SSt |
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt |
ISO 16584-2002 |
开口型盘头抽芯盲铆钉.NiCu/St或NiCu/SSt |
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt |
ISO 16585-2002 |
封闭型盘头抽芯盲铆钉.A2/SSt |
Closed end blind rivets with pull mandrel and protruding head - A2/SSt |
ISO 16586-2003 |
土质.在已知毛体积干密度基础上测定为体积分数的土壤含水量.重量分析法 |
(Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method) |
ISO 16586-2003 |
土质.在已知毛体积干密度基础上测定为体积分数的土壤含水量.重量分析法 |
|
ISO 16587-2004 |
机械振动和冲击.构筑物的工况监控用性能参数 |
|
ISO 16588 AMD 1-2004 |
水质.六络合剂的测定.气相色谱法.修改件1 |
|
ISO 16588 AMD 1-2004 |
水质.六络合剂的测定.气相色谱法.修改件1 |
|
ISO 16588 AMD 1-2004 |
水质.六络合剂的测定.气相色谱法.修改件1 |
|
ISO 16588-2002 |
水质.六络合剂的测定.气相色谱分析法 |
Water quality - Determination of six complexing agents - Gas-chromatographic method |
ISO 16589-1-2001 |
含热塑性密封件的旋转轴唇型密封件.第1部分:标称尺寸和容差 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 1: Nominal dimensions and tolerances |
ISO 16589-2-2001 |
含热塑性密封件的旋转轴唇型密封件.第2部分:词汇 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 2: Vocabulary |
ISO 16589-3-2001 |
含热塑性密封件的旋转轴唇型密封件.第3部分:储存、搬运和安装 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 3: Storage, handling and installation |
ISO 16589-4-2001 |
含热塑性密封件的旋转轴唇型密封件.第4部分:性能测试程序 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 4: Performance test procedures |
ISO 16589-5-2001 |
含热塑性密封件的旋转轴唇型密封件.第5部分:外观缺陷的标识 |
Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections |
ISO 16590-2000 |
水质.汞量测定.用汞齐化浓缩后的方法 |
Water quality - Determination of mercury - Methods involving enrichment by amalgamation |
ISO 16590-2000 |
水质.汞量测定.用汞齐化浓缩后的方法 |
Water quality - Determination of mercury - Methods involving enrichment by amalgamation |