标准号 |
中文名称 |
英文名称 |
| ISO 594-2-1998 |
注射器、针头和某些其它医疗器具用锥度为6%(Luer)的锥形配件.第2部分:锁紧配件 |
Conical fittings with 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 2: Lock fittings |
| ISO 5940-1981 |
炼铝用碳素材料.电极用沥青.用环和球法测定软化点 |
Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of softening point by the ring-and-ball method |
| ISO 5941-1979 |
压缩机、风动工具和机械.最佳压力 |
Compressors, pneumatic tools and machines; Preferred pressures |
| ISO 5943-1988 |
乳酪及其制品.氯化物含量的测定.电位滴定法 |
Cheese and processed cheese products; determination of chloride content; potentiometric titration method |
| ISO 5943-2004 |
干酪及融化干酪制品.氯化物含量的测定.电位滴定法 |
|
| ISO 5943-2004 |
干酪及融化干酪制品.氯化物含量的测定.电位滴定法 |
|
| ISO 5944-2001 |
乳和乳制品.凝固酶的检测.阳性葡萄球菌属.最大概率数技术 |
Milk and milk-based products - Detection of coagulase-positive staphylococci - Most probable number technique |
| ISO 5945-1989 |
橡胶.聚异戊二烯含量的测定 |
Rubber; determination of polyisoprene content |
| ISO 5948-1994 |
铁道车辆材料.超声波验收检验 |
Railway rolling stock material - Ultrasonic acceptance testing |
| ISO 5949-1983 |
工具钢和轴承钢.用标准显微照相确定碳化物分布的显微照相法 |
Tool steels and bearing steels; Micrographic method for assessing the distribution of carbides using reference photomicrographs |
| ISO 595-1-1986 |
可重复使用的全玻璃或金属-玻璃医用注射器.第1部分:尺寸 |
Reusable all-glass or metal-and-glass syringes for medical use; Part 1 : Dimensions |
| ISO 595-2-1987 |
可重复使用的全玻璃或金属-玻璃医用注射器.第2部分:设计.性能要求和试验 |
Reusable all-glass or metal-and-glass syringes for medical use; Part 2 : Design, performance requirements and tests |
| ISO 595-2-1987 |
可重复使用的全玻璃或金属-玻璃医用注射器.第2部分:设计.性能要求和试验 |
Reusable all-glass or metal-and-glass syringes for medical use; Part 2 : Design, performance requirements and tests |
| ISO 5950-2000 |
商用和拉制用连续电镀锡冷轧碳素钢板 |
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 5951-2001 |
压缩成型的高屈服强度热轧钢 |
Hot-rolled steel sheet of higher yield strength with improved formability |
| ISO 5952-1998 |
优质的改良耐大气腐蚀的热连轧结构薄钢板 |
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance |
| ISO 5954-1998 |
符合硬度要求的冷轧碳素薄钢板 |
Cold-reduced carbon steel sheet according to hardness requirements |
| ISO 5956-1984 |
铜和铜合金.锑含量的测定.若丹明B(Rhodamine B)光谱测定法 |
Copper and copper alloys; Determination of antimony content; Rhodamine B spectrometric method |
| ISO 5959-1984 |
铜和铜合金.铋含量的测定.二乙基二硫代氨基甲酸盐光谱测定法 |
Copper and copper alloys; Determination of bismuth content; Diethyldithiocarbamate spectrometric method |
| ISO 5960-1984 |
铜合金.镉含量的测定.火焰原子吸收光谱测定法 |
Copper alloys; Determination of cadmium content; Flame atomic absorption spectrometric method |
| ISO 5961-1994 |
水质.镉的测定.用火焰原子吸收光谱法测定镉 |
Water quality; determination of cadmium by atomic absorption spectrometry |
| ISO 5963-1985 |
文献工作.检验文献、确定其题目和选择索引术语的方法 |
Documentation; Methods for examining documents, determining their subjects, and selecting indexing terms |
| ISO 5964-1985 |
文献工作.多语种主题词表编写和制定导则 |
Documentation; Guidelines for the establishment and development of multilingual thesauri |
| ISO 5967-1981 |
丝锥和螺纹切削.主要类型的名称和术语词汇.三种语言版 |
Taps and thread cutting; Nomenclature of the main types and terminology Trilingual edition |
| ISO 5968-1981 |
圆板牙.术语 |
Circular screwing dies; Terminology |
| ISO 5969 Technical Corrigendum 1-1991 |
G系列和Rp系列管螺纹用的磨制螺纹丝锥.螺纹部分的公差.技术勘误1 |
Ground thread taps for pipe threads G series and Rp series; tolerances on the threaded portion; technical corrigendum 1 |
| ISO 5969-1979 |
G系列和Rp系列管螺纹用的磨制螺纹丝锥.螺纹部分的公差 |
Ground thread taps for pipe threads G series and Rp series; Tolerances on the threaded portion |
| ISO 5970-1979 |
家具.教育机构的桌椅.功能尺寸 |
Furniture; Chairs and tables for educational institutions; Functional sizes |
| ISO 5971-1981 |
服装的尺寸标识.连裤袜 |
Size designation of clothes; Pantyhose |
| ISO 5975-1983 |
铬矿石.钙和镁含量测定.乙二胺四乙酸(EDTA)滴定法 |
Chromium ores; Determination of calcium and magnesium contents; EDTA titrimetric method |
| ISO 5978-1990 |
橡胶或塑料涂覆织物.耐粘结性测定 |
Rubber- or plastics-coated fabrics; determination of blocking resistance |
| ISO 5979-1982 |
橡胶或塑料涂层织物.柔性的测定.扁环法 |
Rubber or plastics coated fabrics; Determination of flexibility; Flat loop method |
| ISO 5981-1997 |
橡胶或塑料涂层织物.抗复合弯曲剪切和磨损的测定 |
Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing |
| ISO 5982-2001 |
机械振动和冲击.表征在垂直振动下人体对生物动力反映的理想值的范围 |
Mechanical vibration and shock - Range of idealized values to characterize seated-body biodynamic response under vertical vibration |
| ISO 5983-1997 |
动物饲料.氮含量的测定和粗蛋白质含量的计算.基尔达斯法 |
Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Kjeldahl method |
| ISO 5984-2002 |
动物饲料.粗灰分的测定 |
Animal feeding stuffs - Determination of crude ash |
| ISO 5985-2002 |
动物饲料.盐酸不溶性灰分的测定 |
Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid |
| ISO 5990-2000 |
摄影术.加工照片用化学药品.浓度为650g/l的亚硫酸钾溶液规范 |
Photography - Processing chemicals - Specifications for potassium sulfite, 650 g/l solution |
| ISO 5991-1979 |
香精油.用减压蒸馏法测定残渣 |
Essential oils; Determination of residue from distillation under reduced pressure |
| ISO 5993-1979 |
工业用氢氧化钠.汞含量的测定.火焰原子吸收光谱测定法 |
Sodium hydroxide for industrial use; Determination of mercury content; Flameless atomic absorption spectrometric method |
| ISO 5996-1984 |
铸铁闸阀 |
Cast iron gate valves |
| ISO 5997-1984 |
铬矿石和铬精矿.硅含量的测定.分子吸收光谱法和重量法 |
Chromium ores and concentrates; Determination of silicon content; Molecular absorption spectrometric method and gravimetric method |
| ISO 5998-1986 |
土方机械.履带式和轮式装载机的额定工作载荷 |
Earth-moving machinery; Rated operating load for crawler and wheel loaders |
| ISO 5999-1982 |
泡沫柔性聚合材料.聚氯乙烯泡沫??规范 |
Polymeric materials, cellular flexible; Polyurethane foam for load-bearing applications excluding carpet underlay; Specification |
| ISO 6-1993 |
摄影技术.黑白照相机负片/冲洗系统.ISO感光速度测定 |
Photography; black-and-white pictorial still camera negative film/process systems; determination of ISO speed |
| ISO 60-1977 |
塑料.可由专用漏斗注入的材料表观密度的测定 |
Plastics; Determination of apparent density of material that can be poured from a specified funnel |
| ISO 6000-1981 |
圆头卷心菜.露天贮存 |
Round-headed cabbage; Storage in the open |
| ISO 6002-1992 |
螺栓盖钢制阀门 |
Bolted bonnet steel gate valves |
| ISO 6003-1984 |
高山雪橇.雪撬质量和惯性极力矩的测定.实验室测量法 |
Alpine skis; Determination of mass and polar moment of inertia; Laboratory measurement method |
| ISO 6004-1991 |
高山雪橇.雪橇紧固螺钉.要求 |
Alpine skis; ski binding screws; requirements |
| ISO 6005-1991 |
高山雪橇.雪撬紧定螺钉.试验方法 |
Alpine skis; ski binding screws; test methods |
| ISO 6009-1992 |
一次性使用的皮下注射针.识别用色标 |
Hypodermic needles for single use; colour coding for identification |
| ISO 601-1981 |
固体矿物燃料.用ISO 2590的标准二乙基二硫代氨基用酸银光度法测定砷的含量 |
Solid mineral fuels; Determination of arsenic content using the standard silver diethyldithiocarbamate photometric method of ISO 2590 |
| ISO 6011-1987 |
土方机械.操作仪表 |
Earth-moving machinery; Operating instrumentation |
| ISO 6011-2003 |
土方机械.机械操作的直观显示装置 |
(Earth-moving machinery - Visual display of machine operation ) |
| ISO 6011-2003 |
土方机械.机械操作的直观显示装置 |
|
| ISO 6012-1997 |
土方机械.检修仪表 |
Earth-moving machinery - Service instrumentation |
| ISO 6014-1986 |
土方机械.行驶速度的测定 |
Earth-moving machinery; Determination of ground speed |
| ISO 6015-1989 |
土方机械.液压挖掘机.机械过加载的测量方法 |
Earth-moving machinery; hydraulic excavators; methods of measuring tool forces |
| ISO 6016-1998 |
土方机械.整机及其设备和组件质量(物理的质量)的测量方法 |
Earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components |
| ISO 602-1983 |
煤.矿物质的测定 |
Coal; Determination of mineral matter |
| ISO 6020-1-1998 |
液力传动.16MPa(160 bar)系列单杆液压缸装配尺寸.第1部分:中型系列 |
Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series |
| ISO 6020-2-1991 |
液力传动.16MPa(160 bar)系列单杆液压缸装配尺寸.第2部分:小型系列 |
Hydraulic fluid power; mounting dimensions for single rod cylinders, 16 MPa (160 bar) series; part 2: compact series |
| ISO 6020-3-1994 |
滚动传动.单杆液压缸装配尺寸,16MPa系列.第3部分:气缸内径250-500mm的小型系列 |
Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 3: Compact series with bores from 250 mm to 500 mm |
| ISO 6022-1981 |
液压传动.单杆液压缸.装配尺寸.250巴(25000kPa)系列 |
Hydraulic fluid power; Single rod cylinders; Mounting dimensions; 250 bar (25 000 kPa) series |
| ISO 6025-2000 |
电影技术.35mm和16mm模拟摄影声音试验胶片.规范 |
Cinematography - Analogue photographic sound test films, 35 mm and 16 mm - Specifications |
| ISO 6027-1980 |
电影技术.与电影放映的双轴片盒一起使用的8mmS型电影胶片的放映片盘.尺寸和规范 |
Cinematography; Projection reels for 8 mm type S motion-picture film for use with projection cassettes; Dimensions and specifications |
| ISO 603-1 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第1部分:中心之间外圆柱形磨床用砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 1: Grinding wheels for external cylindrical grinding between centres; Technical Corrigendum 1 |
| ISO 603-1-1999 |
粘合磨料产品.尺寸.第1部分:中心之间外圆柱形磨床用砂轮 |
Bonded abrasive products - Dimensions - Part 1: Grinding wheels for external cylindrical grinding between centres |
| ISO 603-10 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第10部分:精整携磨石.技术勘误1 |
Bonded abrasive products - Dimensions - Part 10: Stones for honing and superfinishings; Technical Corrigendum 1 |
| ISO 603-10-1999 |
粘合磨料产品.尺寸.第10部分:精整携磨石 |
Bonded abrasive products - Dimensions - Part 10: Stones for honing and superfinishings |
| ISO 603-11 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第11部分:手工精整油石.技术勘误1 |
Bonded abrasive products - Dimensions - Part 11: Hand finishing sticks; Technical Corrigendum 1 |
| ISO 603-11-1999 |
粘合磨料产品.尺寸.第11部分:手工精整油石 |
Bonded abrasive products - Dimensions - Part 11: Hand finishing sticks |
| ISO 603-12 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第12部分:在直的磨料上清理和整修毛刺的砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 12: Grinding wheels for deburring and fettling on a straight grinder; Technical Corrigendum 1 |
| ISO 603-12-1999 |
粘合磨料产品.尺寸.第12部分:在直的磨料上清理和整修毛刺的砂轮 |
Bonded abrasive products - Dimensions - Part 12: Grinding wheels for deburring and fettling on a straight grinder |
| ISO 603-13 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第13部分:在一垂直磨料上清理和整修毛刺的砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 13: Grinding wheels for deburring and fettling on a vertical grinder; Technical Corrigendum 1 |
| ISO 603-13-1999 |
粘合磨料产品.尺寸.第13部分:在一垂直磨料上清理和整修毛刺的砂轮 |
Bonded abrasive products - Dimensions - Part 13: Grinding wheels for deburring and fettling on a vertical grinder |
| ISO 603-14 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第14部分:在一角度磨床上清理和整修毛刺的砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder; Technical Corrigendum 1 |
| ISO 603-14-1999 |
粘合磨料产品.尺寸.第14部分:在一角度磨床上清理和整修毛刺的砂轮 |
Bonded abrasive products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder |
| ISO 603-15 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第15部分:固定或移动磨料切削机上的切削砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines; Technical Corrigendum 1 |
| ISO 603-15-1999 |
粘合磨料产品.尺寸.第15部分:固定或移动磨料切削机上的切削砂轮 |
Bonded abrasive products - Dimensions - Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines |
| ISO 603-16 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第16部分:手持动力工具的切削砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools; Technical Corrigendum 1 |
| ISO 603-16-1999 |
粘合磨料产品.尺寸.第16部分:手持动力工具的切削砂轮 |
Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools |
| ISO 603-2 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第2部分:非中心圆柱形磨轮的砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 2: Grinding wheels for centreless external cylindrical grinding; Technical Corrigendum 1 |
| ISO 603-2-1999 |
粘合磨料产品.尺寸.第2部分:非中心圆柱形磨轮的砂轮 |
Bonded abrasive products - Dimensions - Part 2: Grinding wheels for centreless external cylindrical grinding |
| ISO 603-3 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第3部分:内圆柱形磨床砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 3: Grinding wheels for internal cylindrical grinding; Technical Corrigendum 1 |
| ISO 603-3-1999 |
粘合磨料产品.尺寸.第3部分:内圆柱形磨床砂轮 |
Bonded abrasive products - Dimensions - Part 3: Grinding wheels for internal cylindrical grinding |
| ISO 603-4 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第4部分:表面磨/周边磨砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 4: Grinding wheels for surface grinding/peripheral grinding; Technical Corrigendum 1 |
| ISO 603-4-1999 |
粘合磨料产品.尺寸.第4部分:表面磨/周边磨砂轮 |
Bonded abrasive products - Dimensions - Part 4: Grinding wheels for surface grinding/peripheral grinding |
| ISO 603-5 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第5部分:表面磨砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 5: Grinding wheels for surface grinding/face grinding; Technical Corrigendum 1 |
| ISO 603-5-1999 |
粘合磨料产品.尺寸.第5部分:表面磨砂轮 |
Bonded abrasive products - Dimensions - Part 5: Grinding wheels for surface grinding/face grinding |
| ISO 603-6 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第6部分:工具和工具室磨削用砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding; Technical Corrigendum 1 |
| ISO 603-6-1999 |
粘合磨料产品.尺寸.第6部分:工具和工具室磨削用砂轮 |
Bonded abrasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding |
| ISO 603-7 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第7部分:手工磨砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 7: Grinding wheels for manually guided grinding; Technical Corrigendum 1 |
| ISO 603-7-1999 |
粘合磨料产品.尺寸.第7部分:手工磨砂轮 |
Bonded abrasive products - Dimensions - Part 7: Grinding wheels for manually guided grinding |
| ISO 603-8 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第8部分:清除毛刺和修整用砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 8: Grinding wheels for deburring and fettling/snagging; Technical Corrigendum 1 |
| ISO 603-8-1999 |
粘合磨料产品.尺寸.第8部分:清除毛刺和修整用砂轮 |
Bonded abrasive products - Dimensions - Part 8: Grinding wheels for deburring and fettling/snagging |
| ISO 603-9 Technical Corrigendum 1-1999 |
粘合磨料产品.尺寸.第9部分:高压磨料砂轮.技术勘误1 |
Bonded abrasive products - Dimensions - Part 9: Grinding wheels for high-pressure grinding; Technical Corrigendum 1 |
| ISO 603-9-1999 |
粘合磨料产品.尺寸.第9部分:高压磨削用砂轮 |
Bonded abrasive products - Dimensions - Part 9: Grinding wheels for high-pressure grinding |
| ISO 6033-1983 |
电影技术.8mmS型电影胶片用七号放映片盘.尺寸和规范 |
Cinematography; Projection reel size 7 for 8 mm Type S motion-picture film; Dimensions and specifications |
| ISO 6035-1983 |
电影技术.评价电视片和电视幻灯片的观看条件.色彩,亮度和尺寸 |
Cinematography; Viewing conditions for the evaluation of films and slides for television; Colours, luminances and dimensions |
| ISO 6036-1996 |
电影摄影.电视用彩色电影印刷品和幻灯片 |
Cinematography - Colour motion-picture prints and slides for television - Density specifications |
| ISO 6038-1993 |
电影技术.70mm,65mm,35mm和16mm电影胶片用的拼接接片.尺寸和位置 |
Cinematography; splices for use on 70 mm, 65 mm, 35 mm and 16 mm motion-picture films; dimensions and locations |
| ISO 604-2002 |
塑料.压缩性能的测定 |
Plastics - Determination of compressive properties |
| ISO 6042-1998 |
船舶和造船技术.防风雨的单扇钢门 |
Ships and marine technology - Weathertight single-leaf steel doors |
| ISO 6043-1985 |
造船和海上建筑物.受拉伸载荷的叉和眼结构总成.主要尺寸 |
Shipbuilding and marine structures; Eye and fork assemblies under tension load; Main dimensions |
| ISO 6044-1985 |
造船和海上建筑物.悬臂起重机吊杆底脚装置.主要尺寸 |
Shipbuilding and marine structures; Derrick boom heel fittings; Main dimensions |
| ISO 6045-1987 |
造船和海上建筑物.悬臂起重机鹅颈件轴承.装置和件 |
Shipbuilding and marine structures; Bearings for derrick goosenecks; Assemblies and components |
| ISO 605-1991 |
豆科作物.杂物、大孝异味、虫害、外形以及品种的测定.试验方法 |
Pulses; determination of impurities, size, foreign odours, insects, and species and variety; test methods |
| ISO 6050-1987 |
造船.球形船头和侧向推进器符号 |
Shipbuilding; Bulbous bow and side thruster symbols |
| ISO 6053-1979 |
摄影技术.快门线释放端和接口.尺寸 |
Photography; Shutter cable release tip and socket; Dimensions |
| ISO 6053-1979 |
摄影技术.快门线释放端和接口.尺寸 |
Photography; Shutter cable release tip and socket; Dimensions |
| ISO 6054-1-1994 |
机动脚踏车轮胎和轮辋(规定牌号系列).直径牌号4-12.第1部分:轮胎 |
Motorcycle tyres and rims (Code-designated series) - Diameter codes 4 to 12 - Part 1: Tyres |
| ISO 6054-2-1990 |
摩托车轮胎和轮辋(规定牌号系列).直径牌号4-12.第2部分:轮辋 |
Motorcycle tyres and rims (code-designated series); diameter codes 4 to 12; part 2: rims |
| ISO 6055-1997 |
高升降居中式运货车.顶防护板.规范和试验 |
High-lift rider trucks - Overhead guards - Specification and testing |
| ISO 6055-2004 |
工业用货车.护顶架.规范和检验 |
|
| ISO 6058-1984 |
水质.钙含量的测定.乙二胺四乙酸滴定法 |
Water quality; Determination of calcium content; EDTA titrimetric method |
| ISO 6059-1984 |
水质.钙和镁总含量的测定.乙二胺四乙酸滴定法 |
Water quality; Determination of the sum of calcium and magnesium; EDTA titrimetric method |
| ISO 606-1994 |
短节距精密传动辊子链和链轮 |
Short-pitch transmission precision roller chains and chain wheels |
| ISO 606-2004 |
短节距精密传动辊子链和套筒链、附件和辅助链轮 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com