标准号 |
中文名称 |
英文名称 |
| BS ISO 15152-2003 |
烟草.用作烟碱的总生物碱含量的测定.续流分析法 |
(Tobacco - Determination of the content of total alkaloids as nicotine - Continuous-flow analysis method) |
| BS ISO 15153-2003 |
烟草.还原物质含量的测定.续流分析法 |
(Tobacco - Determination of the content of reducing substances - Continuous-flow analysis method) |
| BS ISO 15154-2003 |
烟草.还原的碳水化物含量的测定.续流分析法 |
(Tobacco - Determination of the content of reducing carbohydrates - Continuous-flow analysis method) |
| BS ISO 15161-2001 |
食品与饮料业用ISO 9001-2000的应用导则 |
Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| BS ISO 15166-1-1998 |
胶粘剂.大块样品的准备方法.第1部分:由两部分组成的系统 |
Adhesives - Methods of preparing bulk specimens - Two-part systems |
| BS ISO 15166-2-2001 |
胶粘剂.大块样品的准备方法.高温处理一部分系统 |
Adhesives - Methods of preparing bulk specimens - Elevated-temperature-curing one-part systems |
| BS ISO 15169-2004 |
石油和液态石油产品.使用混合罐测量系统测定立式圆筒状油罐中烃类的体积、密度和质量 |
|
| BS ISO 15171-1-1999 |
液压和一般用途的连接.诊断用途的液压耦合.压力下非连接耦合 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling not for connection under pressure |
| BS ISO 15171-2-2000 |
流体动力和通用连接器.鉴定目的用液压联轴器.加压连接用端头为M16×2的联轴器 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling with M16 x 2 end for connection under pressure |
| BS ISO 15175-2004 |
土质.与地下水保护有关的土壤的表征 |
|
| BS ISO 15176-2002 |
土壤质量.挖掘土壤和要求再利用的其他土壤特征 |
Soil quality - Characterization of excavated soil and other soil materials intended for re-use |
| BS ISO 15186-1-2000 |
声学.建筑物隔声测量和用声强测量建筑部件.实验室条件 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Laboratory conditions |
| BS ISO 15186-2-2003 |
声学.用声强作建筑物和建筑构件的隔声测量.现场测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Field measurements) |
| BS ISO 15186-3-2002 |
声学.利用声强度测量建筑物和建筑部件的隔音情况.低频实验室测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Laboratory measurements at low frequencies |
| BS ISO 15188-2001 |
术语标准化项目管理指南 |
Project management guidelines for terminology standardization |
| BS ISO 15190-2003 |
医学实验室.安全要求 |
(Medical laboratories - Requirements for safety) |
| BS ISO 15198-2004 |
临床实验室医学.体外诊断医疗装置.生产商验证的用户质量控制规程 |
|
| BS ISO 15198-2004 |
临床实验室药物.体外诊断医疗设备.由制造商证实的用户质量控制程序 |
|
| BS ISO 15202-1-2000 |
工作场所空气.用感应耦合等离子体原子发射光谱法对气载颗粒物质中金属和非金属的测定.取样 |
Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sampling |
| BS ISO 15202-2-2005 |
工作场所空气.用感应耦合等离子体原子发射光谱法测定气载颗粒物质中的金属和准金属.样品制备 |
|
| BS ISO 15202-2-2005 |
工作场所空气.用感应耦合等离子体原子发射光谱法测定气载颗粒物质中的金属和准金属.样品制备 |
|
| BS ISO 15202-3-2004 |
工作场所空气.用感应耦合等离子体原子发射光谱法测定气载颗粒物质中的金属和类金属物.分析 |
|
| BS ISO 15213-2003 |
食品和动物饲料的微生物学.计算厌氧条件下用亚硫酸盐抑制细菌生长的水平法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions) |
| BS ISO 15214-1998 |
食品和动物饲料的微生物学.适温性乳酸菌的水平计数法.30℃的菌落计数技术 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of mesophilic lactic acid bacteria - Colony-count technique at 30 鳦 |
| BS ISO 15217-2001 |
液压传动系统和件.16平方毫米接地接点电连接器.特性和要求 |
Fluid power systems and components - 16mm square electrical connector with earth contact - Characteristics and requirements |
| BS ISO 15218-2003 |
气液传动.3/2电磁阀.安装接口表面 |
Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces |
| BS ISO 15227-2000 |
光学和光学仪器.显微镜.立体可视显微镜试验 |
Optics and optical instruments - Microscopes - Testing of stereomicroscopes |
| BS ISO 15237-2003 |
固体矿物燃料.煤中汞的总含量测定 |
(Solid mineral fuels - Determination of total mercury content of coal) |
| BS ISO 15238-2003 |
固体矿物燃料.煤中镉的总含量测定 |
(Solid mineral fuels - Determination of total cadmium content of coal) |
| BS ISO 15242-1-2004 |
滚动轴承.振动测量方法.基本原则 |
|
| BS ISO 15243-2004 |
滚动轴承.损害和故障.术语、特性和成因 |
|
| BS ISO 15261-2004 |
振动和冲击发生系统.词汇 |
|
| BS ISO 15303-2001 |
动植物脂肪和油.GC/MS法检测和识别挥发性有机杂质 |
Animal and vegetable fats and oils - Detection and identification of a volatile organic contaminent by GC/MS |
| BS ISO 15310-2000 |
纤维增强的塑料化合物.用板弯曲方法测定面内剪切模量 |
Reinforced plastics - Determination of the in-plane shear modulus by the plate twist method |
| BS ISO 15312-2004 |
滚动轴承.热速额定值.计算和系数 |
|
| BS ISO 15314-2005 |
塑料.海上曝光法 |
|
| BS ISO 15319-2001 |
再生纸浆.用反射光仪器法评价可视原料中的杂质 |
Recycled pulps - Estimation of visible contraries by instrumental means using reflected light |
| BS ISO 15323-2002 |
奶粉蛋白质产品.氮溶解率测定 |
Dried milk protein products - Determination of nitrogen solubility index |
| BS ISO 15324-2001 |
金属和合金的腐蚀.用滴水蒸发试验评价应力腐蚀裂纹 |
Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test |
| BS ISO 15350-2001 |
钢铁.碳和硫总含量的测定.感应炉中燃烧后的红外线吸收法(常规法) |
Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) |
| BS ISO 15359-2000 |
纸和纸板.摩擦系数的静态和动态测定.水平面法 |
Paper and board - Determination of the static and kinetic coefficients of friction - Horizontal plane method |
| BS ISO 15360-1-2001 |
再生纸浆.粘性和塑性的估测.外观检查法 |
Recycled pulps - Estimation of stickies and plastics - Visual method |
| BS ISO 15361-2001 |
纸浆.在湿润或干燥的条件下测定零距抗张强度 |
Pulps - Determination of zero-span tensile strength, wet or dry |
| BS ISO 15364-2000 |
船舶技术.货船用压力/真空阀 |
Ships and marine technology. Pressure/vacuum valves for cargo tanks |
| BS ISO 15368-2001 |
光学和光学仪器.平面的反射系数的测定和平行板透射率的测定 |
Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements |
| BS ISO 15370-2004 |
船舶与海上技术.客轮的低位照明.布局 |
|
| BS ISO 15370-2004 |
船舶与海上技术.客轮的低位照明.布局 |
|
| BS ISO 15371-2000 |
船舶技术.船上厨房的深油烹饪设备保护用灭火系统.着火试验 |
Ships and marine technology - Fire-extinguishing systems for protection of galley deep-fat cooking equipment - Fire tests |
| BS ISO 15372-2003 |
船舶与海上技术.充气式救生艇.充气室用漆布 |
(Ships and marine technology - Inflatable rescue boats - Coated fabrics for inflatable chambers) |
| BS ISO 15373-2001 |
塑料.聚合物水分散体.游离甲醛含量的测定 |
(Plastics - Polymer dispersions - Determination of free formaldehyde) |
| BS ISO 15374-1998 |
外科植入物.锻件制品要求 |
(Implants for surgery - Requirements for production of forgings) |
| BS ISO 15379-1-2004 |
铝生产用含碳材料.阴极块材料.压力作用下由于钠渗透引起的膨胀的测定 |
|
| BS ISO 15379-2-2004 |
铝生产用碳质材料.阴极块材料.无压力作用下由于钠渗透引起的膨胀的测定 |
|
| BS ISO 15380-2002 |
润滑剂、工业用油和相关产品(L类).系列H(液压系统).HETG, HEPG, HEES 和 HEPR类的规范 |
Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR |
| BS ISO 15389-2004 |
航天系统.飞行着陆脱落插头 |
|
| BS ISO 15390-2004 |
航天环境(自然和人工).星系宇宙射线模型 |
|
| BS ISO 15390-2004 |
航天环境(自然和人工).星系宇宙射线模型 |
|
| BS ISO 15394-2000 |
包装.航运、运输和可接受标签的两维符号和条码 |
Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels |
| BS ISO 15401-2000 |
船和造船技术.散货船.船体结构的建造质量 |
Ships and marine technology - Bulk carriers - Construction quality of hull structure |
| BS ISO 15402-2000 |
船和造船技术.散货船.船体结构的修理质量 |
Ships and marine technology - Bulk carriers - Repair quality of hull structure |
| BS ISO 15403-2000 |
天然气.用作车辆压缩燃料的天然气质量的名称与符号 |
Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles |
| BS ISO 15407-1-2000 |
18mm和26mm五气口气动方向控制阀.无电插头的安装界面 |
Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector |
| BS ISO 15407-2-2003 |
气压传动.五气口方向控制阀,规格18mm和26mm.有任选电接头的安装接口 |
(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector) |
| BS ISO 15459-1-2000 |
信息技术.传输块体的特殊识别.总则 |
Information technology - Unique identification of transport units - General |
| BS ISO 15469-1998 |
日光的空间分布.CIE标准阴天和晴天 |
Spatial distribution of daylight - CIE standard overcast sky and clear sky |
| BS ISO 15469-2004 |
日光的空间分布.CIE标准普通天 |
|
| BS ISO 15470-2005 |
表面化学分析.X射线光电光谱法.选定的仪器性能参数的描述 |
|
| BS ISO 15471-2005 |
表面化学分析.俄歇电子光谱法.选定的仪器性能参数的描述 |
|
| BS ISO 15472-2001 |
表面化学分析.X-射线光电谱.能量刻度的校正 |
Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales |
| BS ISO 15489-1-2001 |
信息和文献工作.记录品管理.总则 |
Information and documentation - Records management - General |
| BS ISO 15490-2001 |
细陶瓷(高级陶瓷、高级工业陶瓷).室温下单片陶瓷抗拉强度的试验方法 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature |
| BS ISO 155-1999 |
皮带传动.皮带轮.中心调整极限值 |
Belt drives - Pulleys - Limiting values for adjustment of centres |
| BS ISO 15509-2001 |
胶粘剂.工程塑料接头粘结强度的测定 |
Adhesives - Determination of the bond strength of engineering-plastic joints |
| BS ISO 15511-2004 |
信息和文献工作.图书馆和相关组织的国际标准标识符 |
|
| BS ISO 15511-2004 |
信息和文献工作.图书馆和相关组织的国际标准标识符 |
|
| BS ISO 15512-1999 |
塑料.水含量的测定 |
Plastics - Determination of water content |
| BS ISO 15513-2000 |
起重机.起重机司机(操纵者)、吊装工、信号员和助手的资格要求 |
Cranes - Competency requirements for crane drivers (operators), slingers, signallers and assessors |
| BS ISO 15517-2004 |
烟草.硝酸盐含量的测定.连续流分析法 |
|
| BS ISO 15517-2004 |
烟草.硝酸盐含量的测定.连续流分析法 |
|
| BS ISO 15529-1999 |
光学和光学仪器.透光功能.样品成像系统调整透光功能(MTF)的测量原理 |
Optics and optical instruments - Optical transfer function - Principles of measurement of modular transfer function (MTF) of sampled imaging systems |
| BS ISO 15544-2001 |
石油和天然气工业.海上生产装置.紧急响应要求和导则 |
Petroleum and natural gas industries - Offshore production installations - Requirements and guidelines for emergency response |
| BS ISO 15550-2002 |
内燃机.测量发动机功率的测定方法.总要求 |
Internal combustion engines - Determination and method for the measurement of engine power - General requirements |
| BS ISO 15552-2004 |
气压传动.具有可拆卸安装件的、1000kPa(10 bar)系列、孔径为32mm至320mm的气缸.基础尺寸、安装尺寸和附件尺寸 |
|
| BS ISO 15554-1999 |
食品加工中γ辐射线辐射设备剂量测定的实施规程 |
Practice for dosimetry in gamma irradiation facilities for food processing |
| BS ISO 15557-1999 |
辐射铬膜剂量测定系统的实施规程 |
Practice for use of a radiochromic film dosimetry system |
| BS ISO 15558-1999 |
聚甲基丙烯酸甲酯剂量测定系统的实施规程 |
Practice for use of a polymethylmethacrylate dosimetry system |
| BS ISO 15559-1999 |
辐射化学光学波导剂量测定系统的实施规程 |
Practice for use of a radiochromic optical waveguide dosimetry system |
| BS ISO 15560-1999 |
用高剂量辐射剂量实验室校验的性能和特性的实施规程 |
Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory |
| BS ISO 15562-1999 |
食品加工用电离辐射和韧性辐射设备剂量测定的实施规程 |
Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing |
| BS ISO 15563-1999 |
乙醇-氯苯剂量测定系统的实施规程 |
Practice for use of the ethanol-chlorobenzene dosimetry system |
| BS ISO 15564-1999 |
辐射敏感指示计的使用指南 |
Guide for use of radiation-sensitive indicators |
| BS ISO 15565-1999 |
液态铬辐射剂量测定系统的使用规程 |
Practice for use of a radiochromic liquid dosimetry system |
| BS ISO 15567-1999 |
X-射线(韧性辐射)剂量测定的实施规程 |
Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing |
| BS ISO 15570-1999 |
纤维素乙酸酯剂量测定系统的使用规程 |
Practice for use of cellulose acetate dosimetry system |
| BS ISO 15583-2005 |
船舶和海上技术.海运标准清单 |
|
| BS ISO 15592-1-2001 |
切细烟草及其烟制品.抽样、调节和分析方法.抽样 |
Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Sampling |
| BS ISO 15592-2-2001 |
切细烟草及其烟制品.抽样、调节和分析方法.调节和检验用大气环境 |
Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Atmosphere for conditioning and testing |
| BS ISO 15592-3-2003 |
细切烟草及其烟制品.抽样、调节和分析方法.用常规分析吸烟机测定烟制品中颗粒物质总量、水和烟碱测定的准备和无烟碱干燥颗粒物质的计算 |
Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and |
| BS ISO 15593-2001 |
环境烟草烟雾.呼吸悬浮颗粒评价.通过荧光和紫外线吸收对颗粒物质的测定 |
Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence |
| BS ISO 15597-2004 |
石油和石油产品试验方法.BS 2000-503:氯和溴含量的测定.波长色散X射线荧光光谱测定法 |
|
| BS ISO 15600-2000 |
模具.注塑模用隔热板 |
Tools for moulding - Thermal insulating sheets for injection moulds |
| BS ISO 15621-1999 |
吸尿辅助器.评定的一般指南 |
Urine-absorbing aids - General guidance on evaluation |
| BS ISO 15629-2002 |
物料搬运托盘.新托盘组件和用过的木制平托盘检修用紧固件质量 |
Pallets for materials handling - Quality of fasteners for assembly of new and repair of used, flat, wooden pallets |
| BS ISO 15632-2002 |
微光束分析.带半导体探测器的能量散射X射线光谱仪的仪器规范 |
Microbeam analysis - Instrumental specification for energy dispersive X-ray spectrometers with semiconductor detectors |
| BS ISO 15634-2005 |
铁矿石.铬含量的测定.火焰原子吸收光谱测定法 |
|
| BS ISO 15635-2003 |
砂布.页轮圆盘 |
(Coated abrasives - Flap discs) |
| BS ISO 15636-2003 |
刚纸圆盘用辅助垫片 |
(Back-up pads for vulcanized fibre discs) |
| BS ISO 15637-1-2002 |
圆柱形研磨套筒支承夹具.手动砂轮机用带柄的支承夹具 |
Holding fixtures of cylindrical abrasive sleeves - Holding fixtures with shank for hand-held grinding machines |
| BS ISO 15637-2-2002 |
圆柱形研磨套筒支承夹具.固定机械用支承夹具 |
Holding fixtures of cylindrical abrasive sleeves - Holding fixtures for stationary machines |
| BS ISO 15643-2002 |
道路建设和维修设备.沥青粘合剂摊铺机/铁铣.术语和商业规范 |
Road construction and maintenance equipment - Bituminous binder spreaders/sprayers - Terminology and commercial specifications |
| BS ISO 15644-2002 |
道路建设和维修设备. 碎片摊铺机.术语和商业规范 |
Road construction and maintenance equipment - Chippings spreaders - Terminology and commercial specifications |
| BS ISO 15645-2002 |
道路建设和维修设备.道路压碾机.术语和商业规范 |
Road construction and maintenance equipment - Road milling machinery - Terminology and commercial specifications |
| BS ISO 15648-2004 |
黄油.盐含量的测定.电势滴定法 |
|
| BS ISO 15649-2001 |
石油和天然气工业.管道 |
Petroleum and natural gas industries - Piping |
| BS ISO 15663-1-2001 |
石油和天然气工业.寿命周期成本.方法学 |
Petroleum and natural gas industries - Life cycle costing - Methodology |
| BS ISO 15663-2-2001 |
石油和天然气工业.寿命周期成本.方法论的应用和计算方法指南 |
Petroleum and natural gas industries - Life cycle costing - Guidance on application of methodology and calculation methods |
| BS ISO 15663-3-2001 |
石油和天然气工业.生命周期成本.实施导则 |
(Petroleum and natural gas industries - Life cycle costing - Implementation guidelines) |
| BS ISO 15664-2001 |
声学.露天设备噪声控制设计程序 |
Acoustics - Noise control design procedures for open plant |
| BS ISO 15665-2003 |
声学.管、阀和法兰隔声 |
(Acoustics - Acoustic insulation for pipes, valves and flanges) |
| BS ISO 15668-2000 |
银行业务.安全文件传输(零售) |
Banking - Secure file transfer (retail) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com