标准号 |
中文名称 |
英文名称 |
| EN ISO 24234-2004 |
牙医学.牙科用汞齐合金用汞及合金 |
|
| EN ISO 2439-2000 |
软质泡沫聚合材料硬度的测定（压痕法） |
Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:1997, including Technical Corrigendum 1:1998) |
| EN ISO 2440-1999 |
软质和硬质泡沫聚合材料加速老化试验 |
Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997) |
| EN ISO 2450-1999 |
奶油脂肪含量的测定重量分析法(参照法) |
Cream - Determination of fat content - Gravimetric method (Reference method) (ISO 2450:1999) |
| EN ISO 2495-2000 |
铁蓝颜料规范和测试方法 |
Iron blue pigments - Specifications and methods of test (ISO 2495:1995) |
| EN ISO 252-1-1999 |
织物传输带层与层之间的粘合强度第1部分：试验方法 |
Textile conveyor belts - Adhesive strength between constitutive elements - Part 1: Methods of test (ISO 252-1:1999) |
| EN ISO 2535-2002 |
塑料不饱和聚脂树脂25℃时胶凝时间的测量 |
Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001) |
| EN ISO 2538-2003 |
产品几何量技术规范(GPS)棱体的角度和斜度系列 |
Geometrical product specifications (GPS) - Series of angles and slopes on prisms (ISO 2583:1998) |
| EN ISO 2554-1998 |
塑料不饱和聚脂树脂羟基值的测定 |
Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997) |
| EN ISO 2555-1999 |
塑料液态或乳态或分散状树脂用落球式粘度计测定表观粘度 |
Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield test method (ISO 2555:1989) |
| EN ISO 2556-2000 |
塑料在大气压力下薄膜和薄板的透气率的测定测压法 |
Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974) |
| EN ISO 2566-1-1999 |
钢伸长值的换算第1部分：碳素钢和低合金钢 |
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN ISO 2566-2-1999 |
钢伸长值的换算第2部分：奥氏体钢 |
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
| EN ISO 2578-1998 |
塑料长期热暴露作用后时间和温度极限的测定 |
Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993) |
| EN ISO 2580-1-2002 |
塑料丙烯晴-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料第1部分：命名系统和基本规范 |
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002) |
| EN ISO 2580-2-1999 |
塑料丙烯晴-丁二烯-苯乙烯共聚物(ABS)的模塑和挤塑材料第2部分：试样的制备和性能的测定 |
Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:1994) |
| EN ISO 2589-2002 |
皮革物理与机械性的试验厚度的测量 |
Leather - Physical and mechanical tests - Determination of thickness (ISO 2589:2002) |
| EN ISO 2592-2001 |
闪点和燃点的测定克利夫开口杯法 |
Determination of flash and fire points - Cleveland open cup method (ISO 2592:2000) |
| EN ISO 2624-1995 |
铜和铜合金平均晶粒度的测定方法 |
Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
| EN ISO 2626-1995 |
铜氢脆试验 |
Copper - Hydrogen embrittlement test (ISO 2626:1973) |
| EN ISO 2639-2002 |
钢渗碳层和硬化层的深度的测定和检验 |
Steel - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002) |
| EN ISO 266-1997 |
声学优先频率 |
Acoustics - Preferred frequencies (ISO 266:1997) |
| EN ISO 2702-1994 |
热处理钢自攻螺钉机械性能 |
Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992) |
| EN ISO 2719-2002 |
闪点的测定 宾斯克-马丁闭口杯法 |
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2002) |
| EN ISO 2738-1999 |
烧结金属材料不包括硬质金属密度、含油量和开口率的测定 |
Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999) |
| EN ISO 2739-1998 |
烧结金属衬套径向抗压强度的测定 |
Sintered metal bushes - Determination of radial crushing strength (ISO 2739:1973) |
| EN ISO 2740-1999 |
烧结金属材料不包括硬质金属拉伸试样 |
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:1999) |
| EN ISO 2758-2003 |
纸 抗破裂强度的测定 |
Paper - Determination of bursting strength (ISO 2758:2001) |
| EN ISO 2759-2003 |
纸板 抗破裂强度的测定 |
Board - Determination of bursting strength (ISO 2759:2001) |
| EN ISO 2789-2003 |
信息和文献国际标准图书馆统计学 |
Information and documentation - International library statistics (ISO 2789:2003) |
| EN ISO 2808-1999 |
色漆和清漆清膜厚度的测定 |
Paints and varnishes - Determination of film thickness (ISO 2808:1997) |
| EN ISO 2810-2004 |
涂料和清漆.涂层的自然老化.暴露和评估 |
|
| EN ISO 2811-1-2001 |
色漆和清漆密度的测定第1部分：比重瓶法 |
Paints and varnishes - Determination of density - Part 1: Pyknometer method (ISO 2811-1:1997) |
| EN ISO 2811-2-2001 |
色漆和清漆密度的测定第2部分：落球法 |
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:1997) |
| EN ISO 2811-3-2001 |
色漆和清漆密度的测定第3部分：潜体法 |
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:1997) |
| EN ISO 2811-4-2001 |
色漆和清漆密度的测定第4部分：压杯法 |
Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:1997) |
| EN ISO 2812-1-1994 |
色漆和清漆耐液体的测定第1部分 ：通用方法 |
Paints and varnishes - Determination of resistance to liquids - Part 1: General methods (ISO 2812-1:1993) |
| EN ISO 2812-2-1994 |
色漆和清漆耐液体的测定第2部分：水浸法 |
Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:1993) |
| EN ISO 2813-1999 |
色漆和清漆在20 °、60 °和85 °非金属漆膜镜面光泽的测定 |
Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20 °60 °und 85 °(ISO 2813:1994, including Technical Corrigendum 1:1997) |
| EN ISO 2815-2003 |
色漆和清漆巴克霍尔压痕试验 |
Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
| EN ISO 2818-1996 |
塑料试样的机加工制备 |
Plastics - Preparation of test specimens by machining (ISO 2818:1994) |
| EN ISO 2819-1994 |
金属基体上的金属层覆盖层电镀和化学沉积层附着力试验方法评述 |
Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:1980) |
| EN ISO 283-1-2000 |
织物传输带全后度拉伸试验第1部分：在标准负荷下拉伸强度、拉断伸长及定伸的测定 |
Textile conveyor belts - Full thickness tensile testing - Part 1: Determination of tensile strength, elongation at break and elongation at the reference load (ISO 283-1:2000) |
| EN ISO 284-2003 |
传输带导电率规范和试验方法 |
Conveyor belts - Electrical conductivity - Specification and test methodes (ISO 284:2003) |
| EN ISO 2860-1999 |
土方机械最小人口尺寸 |
Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) |
| EN ISO 2867-1998 |
土方机械通道装置 |
Earth-moving machinery - Access systems (ISO 2867:1994) |
| EN ISO 2870-1994 |
表面活性剂洗涤剂酸性条件下可水解的和不可水解的阴离子活性物的测定 |
Surface active agents - Detergents - Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions (ISO 2870:1986) |
| EN ISO 2871-1-1994 |
表面活性剂洗涤剂阳离子活性物含量的测定第1部分：高分子质量阳离子活性物 |
Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1-1988) |
| EN ISO 2871-2-1994 |
表面活性剂洗涤剂阳离子活性物含量的测定第2部分：低分子质量(200～500)阳离子活性物 |
Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2-1990) |
| EN ISO 2873-2002 |
包装 满装运输包装和单件货物 低压试验 |
Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000) |
| EN ISO 2875-2002 |
包装 满装运输包装和单件货物 喷水试验 |
Packaging - Complete, filled transport packages and unit loads - Water-spray test (ISO 2875:2000) |
| EN ISO 2897-1-1999 |
塑料耐冲击聚苯乙烯(PS-I)模塑和挤塑材料第1部分：命名系统和基本规范 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2897-1:1997) |
| EN ISO 2897-2-1999 |
塑料耐冲击聚苯乙烯(PS-I)模塑和挤塑材料第2部分：试样的制备和性能的测定 |
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:1994, including Technical Corrigendum 1:1995) |
| EN ISO 2898-1-1999 |
塑料增塑聚氯乙烯(PVC-P)模塑和挤塑材料第1部分：命名系统和基本规范 |
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2898-1:1996) |
| EN ISO 2898-2-1999 |
塑料增塑聚氯乙烯(PVC-P)模塑和挤塑材料第2部分：试样的制备和性能的测定 |
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:1997) |
| EN ISO 291-1997 |
塑料状态调节和试验用标准大气压 |
Plastics - Standard atmospheres for conditioning and testing (ISO 291:1997) |
| EN ISO 2922-2000 |
声学内河水道上和港口中的船舶辐射的空气声的测量 |
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000) |
| EN ISO 293-2003 |
塑料热塑性材料的压模塑试样 |
Plastics - Compression moulding test specimens of thermoplastic materials (ISO 293:1986) |
| EN ISO 294-2-1998 |
塑料热塑性材料试样的注模塑法第2部分：小拉伸棒 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996) |
| EN ISO 294-3-2003 |
塑料热塑性材料试样的注模塑法第3部分：小板 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002) |
| EN ISO 294-4-2003 |
塑料热塑性材料试样的注模塑法第4部分：模塑收缩率的测定 |
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001) |
| EN ISO 295-1998 |
塑料热固性材料试样的压模塑法 |
Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:1991) |
| EN ISO 295-2004 |
塑料.热固性材料试样的压模塑法 |
|
| EN ISO 3001-1999 |
塑料环氧化合物环氧基当量的测定 |
Plastics - Epoxy compounds - Determination of epoxy equivalent (ISO 3001:1999) |
| EN ISO 3037-1996 |
瓦楞纸板边缘抗碾性的测定(边缘未浸腊法) |
Corrugated fibreboard - Determination of edgewise crush resistance (Unwaxed edge method) (ISO 3037:1994) |
| EN ISO 305-1999 |
塑料聚氯乙烯和有关均聚合物和共聚物及其混合物的热稳定性的测定色变法 |
Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine - Containing homopolymers and copolymers and their compounds - Discoloration method (ISO 305:1990) |
| EN ISO 3059-2001 |
无损检测渗透检验与磁性粒子检验检视条件 |
Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2001) |
| EN ISO 306-1996 |
塑料热塑性材料维卡软化温度的测定 |
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:1994) |
| EN ISO 306-2004 |
塑料.热塑性材料.维卡特(VICAT)软化温度的测定(VST) |
|
| EN ISO 307-2003 |
塑料聚酰胺粘度值的测定 |
Plastics - Polyamides - Determination of viscosity number (ISO 307:2003) |
| EN ISO 308-1997 |
塑料酚醛模塑材料丙酮可溶性物质(在未模塑状态时表现树脂含量)的测定 |
Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994) |
| EN ISO 3098-0-1997 |
技术产品文件文字第0部分：一般要求 |
Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997) |
| EN ISO 3098-2-2000 |
技术产品文件文字第2部分：拉丁字母表、数字和符号 |
Technical product documentation - Lettering - Part 2: Latin alphabet, numeral and marks (ISO 3098-2:2000) |
| EN ISO 3098-3-2000 |
技术产品文件文字第3部分：希腊字母表 |
Technical product documentation - Lettering - Part 3: Greek alphabet (ISO 3098-3:2000) |
| EN ISO 3098-4-2000 |
技术产品文件文字第4部分：拉丁字母表用的区分标记和特殊标记 |
Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet (ISO 3098-4:2000) |
| EN ISO 3098-5-1997 |
技术产品文件文字第5部分：拉丁字母，数字和标志的CAD文字分类法 |
Technical product documentation - Lettering - Part 5: CAD lettering of the Latin alphabet, numerals and marks (ISO 3098-5:1997) |
| EN ISO 3098-6-2000 |
技术产品文件文字第6部分：西里尔字母表 |
Technical product documentation - Lettering - Part 6: Cyrillic alphabet (ISO 3098-6:2000) |
| EN ISO 3104-1996 |
石油产品透明和不透明石油液体运动粘度的测定和动力粘度的计算 |
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
| EN ISO 3107-2004 |
牙医学.锌氧化物/丁香酸和锌氧化物/非丁香酸粘固粉 |
|
| EN ISO 3164-1999 |
土方机械保护结构的实验室鉴定挠曲极限的规范 |
Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995) |
| EN ISO 3166-1-1997 |
国家和他们的地区名的代码第1部分：国家代码 |
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:1997) |
| EN ISO 3167-2003 |
塑料多用途试验用试样 |
Plastics - Multipurpose test specimens (ISO 3167:2002) |
| EN ISO 3170-1998 |
石油液体人工采样 |
Petroleum liquids - Manual sampling (ISO 3170:1988, including Amendment 1:1998) |
| EN ISO 3170-2004 |
石油液体.人工采样 |
|
| EN ISO 3171-1999 |
石油液体自动管线的采样 |
Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
| EN ISO 3175-1-1998 |
纺织品干洗和整理第1部分：纺织品和服装可洗净性评估方法 |
Textiles - Dry-cleaning and finishing - Part 1: Method for assessing the cleanability of textiles and garments (ISO 3175-1:1998) |
| EN ISO 3175-2-1998 |
纺织品干洗和整理第2部分：四氯乙烯程序 |
Textiles - Dry-cleaning and finishing - Part 2: Procedures for tetrachloroethene (ISO 3175-2:1998) |
| EN ISO 3175-3-2003 |
纺织品机械干洗稳定性的评估 第3部分：用烃溶剂清洗和整理时试验性能的程序 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using in hydrocarbon solvents (ISO 3175-3:2003) |
| EN ISO 3175-4-2003 |
纺织品织物和衣服的专业护理、干洗和湿洗 用模拟湿洗洗涤和整理时性能试验的程序 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO 3175-4:2003) |
| EN ISO 3188-1994 |
淀粉和淀粉制品用凯氏法测定氮含量滴定法 |
Starches and derived products - Determination of nitrogen content by the Kjeldahl method - Titrimetric method (ISO 3188:1978) |
| EN ISO 3219-1994 |
塑料液态或乳态或分散状的聚合物/树脂使用规定剪切率的旋转式粘度计测定粘度 |
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
| EN ISO 3231-1997 |
色漆和清漆耐二氧化硫湿空气作用的测定 |
Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
| EN ISO 3248-2000 |
色漆和清漆热效应的测定 |
Paints and varnishes - Determination of the effect of heat (ISO 3248:1998) |
| EN ISO 3251-2003 |
色漆、清漆和色漆 非挥发物含量的测定 |
Paints, varnishes and plastics - Determination of non-volatile matter content (ISO 3251:2003) |
| EN ISO 3252-2000 |
粉末冶金术语 |
Powder metallurgy - Vocabulary (ISO 3252:1999) |
| EN ISO 3262-1-1998 |
涂料用填充剂规范和测试方法第1部分：导言和通用试验方法 |
Extenders for paints - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:1997) |
| EN ISO 3262-10-2000 |
涂料用填充剂规范和测试方法第10部分：片状天然滑石 /亚氯酸盐 |
Extenders for paints - Specifications and methods of test - Part 10: Natural, talc/chlorite in lamellar form (ISO 3262-10:2000) |
| EN ISO 3262-11-2000 |
涂料用填充剂规范和测试方法第11部分：含碳酸盐的片状天然滑石 |
Extenders for paints - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonates (ISO 3262-11:2000) |
| EN ISO 3262-12-2001 |
涂料用填充剂规范和测试方法第12部分：白云母 |
Extenders for paints - Specifications and methods of test - Part 12: Muscovite-type mica (ISO 3262-12:2001) |
| EN ISO 3262-13-1998 |
涂料用填充剂规范和测试方法第13部分：天然石英(矿物) |
Extenders for paints - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:1997) |
| EN ISO 3262-14-2000 |
涂料用填充剂规范和测试方法第14部分：白硅石 |
Extenders for paints - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2000) |
| EN ISO 3262-15-2000 |
涂料用填充剂规范和测试方法第15部分：透明石英 |
Extenders for paints - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2000) |
| EN ISO 3262-16-2000 |
涂料用填充剂规范和测试方法第16部分：氢氧化铝 |
Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2000) |
| EN ISO 3262-17-2000 |
涂料用填充剂规范和测试方法第17部分：沉淀硅酸钙 |
Extenders for paints - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2000) |
| EN ISO 3262-18-2000 |
涂料用填充剂规范和测试方法第18部分：沉淀硅铝酸钠 |
Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000) |
| EN ISO 3262-19-2000 |
涂料用填充剂规范和测试方法第19部分：沉淀二氧化硅(石英) |
Extenders for paints - Specifications and methods of test - Part 19: Precipitated silica (ISO 3262-19:2000) |
| EN ISO 3262-2-1998 |
涂料用填充剂规范和测试方法第2部分：重晶石(天然硫酸钡) |
Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262-2:1998) |
| EN ISO 3262-20-2000 |
涂料用填充剂规范和测试方法第20部分：喷雾二氧化硅(石英) |
Extenders for paints - Specifications and methods of test - Part 20: Fumed silica (ISO 3262-20:2000) |
| EN ISO 3262-21-2000 |
涂料用填充剂规范和测试方法第21部分：石英沙(矿物天然石英) |
Extenders for paints - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2000) |
| EN ISO 3262-22-2001 |
涂料用填充剂规范和测试方法第22部分：热碱处理的硅藻土 |
Extenders for paints - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2001) |
| EN ISO 3262-3-1998 |
涂料用填充剂规范和测试方法第3部分：沉淀硫酸钡 |
Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:1998) |
| EN ISO 3262-4-1998 |
涂料用填充剂规范和测试方法第4部分：白垩 |
Extenders for paints - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:1998) |
| EN ISO 3262-5-1998 |
涂料用填充剂规范和测试方法第5部分：天然结晶硫酸钙 |
Extenders for paints - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO 3262-5:1998) |
| EN ISO 3262-6-1998 |
涂料用填充剂规范和测试方法第6部分：沉淀碳酸钙 |
Extenders for paints - Specifications and methods of test - Part 6: Precipitated calcium carbonate (ISO 3262-6:1998) |
| EN ISO 3262-7-1998 |
涂料用填充剂规范和测试方法第7部分：白云石 |
Extenders for paints - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:1998) |
| EN ISO 3262-8-1999 |
涂料用填充剂规范和测试方法第8部分：天然粘土 |
Extenders for paints - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:1999) |
| EN ISO 3262-9-1998 |
涂料用填充剂规范和测试方法第9部分：煅烧粘土 |
Extenders for paints - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:1997) |
| EN ISO 3269-2000 |
紧固件验收检查 |
Fasteners - Acceptance inspection (ISO 3269:2000) |
| EN ISO 3274-1997 |
产品几何量技术规范(GPS)表面结构：轮廓法接触(触针)式仪器的标称特性 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996) |
| EN ISO 3325-1999 |
煅结金属材料，不包括硬质金属横向断裂强度的测定 |
Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (ISO 3325:1996) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com