标准号 |
中文名称 |
英文名称 |
ISO 3085-2002 |
铁矿石.检验精确取样的实验方法 |
(Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement) |
ISO 3086-1998 |
铁矿石.取样偏差检验的实验法 |
(Iron ores - Experimental methods for checking the bias of sampling) |
ISO 3087-1998 |
铁矿石.潮湿度含量的测定 |
(Iron ores - Determination of the moisture content of a lot) |
ISO 3089-1991 |
机床的自动定心、手工操作卡盘.验收检验规范(几何参数检验) |
(Self-centring manually-operated chucks for machine tools; acceptance test specifications (geometrical tests)) |
ISO 3090-1974 |
绳索和绳索制品.网衣线.浸水后长度变化的测定 |
(Ropes and cordage; Netting yarns; Determination of change in length after immersion in water) |
ISO 3091-1975 |
肉和肉制品.硝酸盐含量的测定(参照法) |
(Meat and meat products; determination of nitrate content (reference method)) |
ISO 3093-1982 |
谷类.沉降指数的测定 |
(Cereals; determination of falling number) |
ISO 3093-2004 |
小麦、黑麦和相应的作物粉、硬粒小麦和硬粒小麦粉.根据HAGBERG-PERTEN测定降落数值 |
|
ISO 3095-1975 |
声学.有轨车辆发出的噪音的测量 |
(Acoustics; Measurement of noise emitted by railbound vehicles) |
ISO 3096 Technical Corrigendum 1-1999 |
滚动轴承.针滚柱.尺寸和公差.技术勘误1 |
(Rolling bearings - Needle rollers - Dimensions and tolerances; Technical Corrigendum 1) |
ISO 3096-1996 |
滚动轴承.滚针的尺寸和公差 |
(Rolling bearings - Needle rollers - Dimensions and tolerances) |
ISO 3098-0-1997 |
技术产品文献.按字母分类.第0部分:一般要求 |
(Technical product documentation - Lettering - Part 0: General requirements) |
ISO 3098-2-2000 |
技术产品文献.字体.第2部分:拉丁字母表、数字和符号 |
(Technical product documentation - Lettering - Part 2: Latin alphabet, numerals and marks) |
ISO 3098-3-2000 |
技术产品文献.字体.第3部分:希腊字母表 |
(Technical product documentation - Lettering - Part 3: Greek alphabet) |
ISO 3098-4-2000 |
技术产品文献.字体.第4部分:拉丁字母表用的区分标记和特殊标记 |
(Technical product documentation - Lettering - Part 4: Diacritical and particular marks for the Latin alphabet) |
ISO 3098-5-1997 |
技术产品文献.按文字分类.第5部分:拉丁字母,数字和标志的CAD文字分类法 |
(Technical product documentation - Lettering - Part 5: CAD lettering of the Latin alphabet, numerals and marks) |
ISO 3098-6-2000 |
技术产品文献.字体.第6部分:西里尔字母表 |
(Technical product documentation - Lettering - Part 6: Cyrillic alphabet) |
ISO 31-0 AMD 1-1998 |
量值和单位.第0部分:总则.补充件1 |
(Quantities and units - Part 0: General principles; Amendment 1) |
ISO 31-0-1992 |
量值和单位.第0部分:总则 |
(Quantities and units; part 0: general principles) |
ISO 31-1 AMD 1-1998 |
量值和单位.第1部分:空间和时间.补充件1 |
(Quantities and units - Part 1: Space and time; Amendment 1) |
ISO 31-1-1992 |
量值和单位.第1部分:空间和时间 |
(Quantities and units; part 1: space and time) |
ISO 31-10 AMD 1-1998 |
量值和单位.第10部分:核反应和离子辐射.补充件1 |
(Quantities and units - Part 10: Nuclear reactions and ionizing radiations; Amendment 1) |
ISO 31-10-1992 |
量值和单位.第10部分:核反应和电离辐射 |
(Quantities and units; part 10: nuclear reactions and ionizing radiations) |
ISO 31-11-1992 |
量值和单位.第11部分:物理学和技术科学使用的数学符号 |
(Quantities and units; part 11: mathematical signs and symbols for use in the physical sciences and technology) |
ISO 31-12 AMD 1-1998 |
量值和单位.第12部分:特性数字.补充件1 |
(Quantities and units - Part 12: Characteristic numbers; Amendment 1) |
ISO 31-12-1992 |
量值和单位.第12部分:特征数 |
(Quantities and units; part 12: characteristic numbers) |
ISO 31-13 AMD 1-1998 |
量值和单位.第13部分:固体物理学.补充件1 |
(Quantities and units - Part 13: Solid state physics; Amendment 1) |
ISO 31-13-1992 |
量值和单位.第13部分:固体物理学 |
(Quantities and units; part 13: solid state physics) |
ISO 31-2 AMD 1-1998 |
量值和单位.第2部分:周期的和相关现象.补充件1 |
(Quantities and units - Part 2: Periodic and related phenomena; Amendment 1) |
ISO 31-2-1992 |
量值和单位.第2部分:周期和有关现象 |
(Quantities and units; part 2: periodic and related phenomena) |
ISO 31-3 AMD 1-1998 |
量值和单位.第3部分:力学.补充件1 |
(Quantities and units - Part 3: Mechanics; Amendment 1) |
ISO 31-3-1992 |
量值和单位.第3部分:力学 |
(Quantities and units; part 3: mechanics) |
ISO 31-4 AMD 1-1998 |
量值和单位.第4部分:热学,补充件1 |
(Quantities and units - Part 4: Heat; Amendment 1) |
ISO 31-4-1992 |
量值和单位.第4部分:热学 |
(Quantities and units; part 4: heat) |
ISO 31-5 AMD 1-1998 |
量值和单位.第5部分:电学和磁学,补充件1 |
(Quantities and units - Part 5: Electricity and magnetism; Amendment 1) |
ISO 31-5-1992 |
量值和单位.第5部分:电学和磁学 |
(Quantities and units; part 5: electricity and magnetism) |
ISO 31-6 AMD 1-1998 |
量值和单位.第6部分:光和相关电磁辐射.补充件1 |
(Quantities and units - Part 6: Light and related electromagnetic radiations; Amendment 1) |
ISO 31-6-1992 |
量值和单位.第6部分:光学和相关电磁辐射 |
(Quantities and units; part 6: light and related electromagnetic radiations) |
ISO 31-7 AMD 1-1998 |
量值和单位.第7部分:声学,补充件1 |
(Quantities and units - Part 7: Acoustics; Amendment 1) |
ISO 31-7-1992 |
量值和单位.第7部分:声学 |
(Quantities and units; part 7: acoustics) |
ISO 31-8 AMD 1-1998 |
量值和单位.第8部分:物理化学和分子物理学.补充件1 |
(Quantities and units - Part 8: Physical chemistry and molecular physics; Amendment 1) |
ISO 31-8-1992 |
量值和单位.第8部分:物理化学和分子物理学 |
(Quantities and units; part 8: physical chemistry and molecular physics) |
ISO 31-9 AMD 1-1998 |
量值和单位.第9部分:原子和核物理学,补充件1 |
(Quantities and units - Part 9: Atomic and nuclear physics; Amendment 1) |
ISO 31-9-1992 |
量值和单位.第9部分:原子核物理学 |
(Quantities and units; part 9: atomic and nuclear physics) |
ISO 310-1992 |
锰矿石和锰精矿.分析试样中吸湿量的测定.重量法 |
(Manganese ores and concentrates; determination of hygroscopic moisture content in analytical samples; gravimetric method) |
ISO 3100-1-1991 |
肉和肉制品.试验用样品取样和制备.第1部分:取样 |
(Meat and meat products; sampling and preparation of test samples; part 1: sampling) |
ISO 3100-2-1988 |
肉和肉类制品.取样.第2部分:微生物检验的试样制备 |
(Meat and meat products; Sampling and preparation of test samples; part 2: preparation of test samples for microbiological examination) |
ISO 3101-1981 |
车轮和脚轮.有三个固定孔的三角形顶板 |
(Wheels and castors; Triangular top plates with three fixing holes) |
ISO 3102-1981 |
非机动装置的车轮和脚轮.转轴脚轮的偏位 |
(Wheels and castors for non-powered equipment; Off-set for swivel castors) |
ISO 3103-1980 |
茶叶.感官尝试用茶液的制备 |
(Tea; Preparation of liquor for use in sensory tests) |
ISO 3104 Technical Corrigendum 1-1997 |
石油产品.透明和不透明液体.运动粘度的测定和动力粘度的计算.技术勘误1 |
(Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity; Technical corrigendum 1) |
ISO 3104-1994 |
石油产品.透明和不透明液体.运动粘度的测定和动力粘度的计算 |
(Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity) |
ISO 3105-1994 |
玻璃毛细现象动态粘度计.规范和操作说明 |
(Glass capillary kinematic viscometers - Specifications and operating instructions) |
ISO 3107-1988 |
牙科氧化锌/丁子香酚粘固材料 |
(Dental zinc oxide/eugenol cements and zinc oxide non-eugenol cements) |
ISO 3107-2004 |
牙科学.氧化锌/丁香酚及不含丁香酚的氧化锌粘固粉 |
|
ISO 3107-2004 |
牙科学.氧化锌/丁香酚及不含丁香酚的氧化锌粘固粉 |
|
ISO 3108-1974 |
通用钢丝绳.实际断裂载荷的测定 |
(Steel wire ropes for general purposes; Determination of actual breaking load) |
ISO 3110-1975 |
铜合金.合金素铝含量的测定.容量法 |
(Copper alloys; Determination of aluminium as alloying element; Volumetric method) |
ISO 3111-1975 |
铜合金.合金素锡含量的测定.容量法 |
(Copper alloys; Determination of tin as alloying element; Volumetric method) |
ISO 3112-1975 |
铜和铜合金.铅含量的测定.萃取滴定法 |
(Copper and copper alloys; Determination of lead; Extracting titration method) |
ISO 3114-1977 |
供应饮用水的未增塑聚氯乙烯(PVC)管.铅和锡的可萃取性.试验方法 |
(Unplasticized polyvinyl chloride (PVC) pipes for potable water supply; Extractability of lead and tin; Test method) |
ISO 3116-2001 |
镁和镁合金.锻压镁合金 |
(Magnesium and magnesium alloys - Wrought magnesium alloys) |
ISO 3117-1977 |
切向键和键槽 |
(Tangential keys and keyways) |
ISO 3118-1976 |
工业用过硼酸钠.用机械筛分法测定颗粒大小分布 |
(Sodium perborates for industrial use; Determination of particle size distribution by mechanical sieving) |
ISO 3119-1976 |
工业用硼酸,氧化硼和四硼酸二钠.铬含量的测定.二苯卡巴肼光度法 |
(Boric acid, boric oxide and disodium tetraborates for industrial use; Determination of chromium content; Diphenylcarbazide photometric method) |
ISO 312-1986 |
锰矿石.二氧化锰表示的活性氧含量测定.滴定法 |
(Manganese ores; Determination of active oxygen content, expressed as manganese dioxide; Titrimetric method) |
ISO 3120-1976 |
工业用四硼酸二钠和粗硼酸钠.水含量的测定.重量法 |
(diSodium tetraborates and crude sodium borates for industrial use; Determination of water content; Gravimetric method) |
ISO 3121-1976 |
工业用硼酸,氧化硼和四硼酸二钠.氯化物含量的测定.汞液滴定法 |
(Boric acid, boric oxide and disodium tetraborates for industrial use; Determination of chloride content; Mercurimetric method) |
ISO 3122-1976 |
工业用硼酸,氧化硼.四硼酸二钠,过硼酸钠和粗硼酸盐.铁含量的测定.2.2`-联吡啶光度法 |
(Boric acid, boric oxide, disodium tetraborates, sodium perborates and crude borates for industrial use; Determination of iron content; 2,2`- Bipyridyl photometric method) |
ISO 3123-1976 |
工业用过硼酸钠.溶解速率的测定.电导率法 |
(Sodium perborates for industrial use; Determination of rate of solution; Conductivity method) |
ISO 3124-1976 |
工业用粗硼酸钠.碱介质可溶铁含量的测定.2,2`-联吡啶光度法 |
(Crude sodium borates for industrial use; Determination of iron soluble in alkaline medium; 2,2`- Bipyridyl photometric method) |
ISO 3125-1976 |
工业用粗硼酸钠.碱介质可溶铝含量的测定.乙二胺四乙酸(EDTA)滴定法 |
(Crude sodium borates for industrial use; Determination of aluminium soluble in alkaline medium; EDTA titrimetric method) |
ISO 3126-1974 |
塑料管.尺寸测量 |
(Plastics pipes; Measurement of dimensions) |
ISO 3127-1994 |
热塑性塑料管.抗外部冲击的测定.昼夜法 |
(Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method) |
ISO 3129-1975 |
木材.物理和机械试验的取样方法和一般要求 |
(Wood; Sampling methods and general requirements for physical and mechanical tests) |
ISO 3130-1975 |
木材.供物理和物理试验用的水份含量的测定 |
(Wood; Determination of moisture content for physical and mechanical tests) |
ISO 3131-1975 |
木材.供物理和机械试验用的密度测定 |
(Wood; Determination of density for physical and mechanical tests) |
ISO 3132-1975 |
木材.垂直于木纹的压缩试验 |
(Wood; Testing in compression perpendicular to grain) |
ISO 3133-1975 |
木材.静态弯曲的极限强度的测定 |
(Wood; Determination of ultimate strength in static bending) |
ISO 3134-1-1985 |
轻金属及其合金.术语和定义.第1部分:材料.三种语言版 |
(Light metals and their alloys; Terms and definitions; Part 1 : Materials Trilingual edition) |
ISO 3134-2-1985 |
轻金属及其合金.术语和定义.第2部分:未加工品.三种语言版 |
(Light metals and their alloys; Terms and definitions; Part 2 : Unwrought products Trilingual edition) |
ISO 3134-3-1985 |
轻金属及其合金.术语和定义.第3部分:锻制品.三种语言版 |
(Light metals and their alloys; Terms and definitions; Part 3 : Wrought products Trilingual edition) |
ISO 3134-4-1985 |
轻金属及其合金.术语和定义.第4部分:铸件.三种语言版 |
(Light metals and their alloys; Terms and definitions; Part 4 : Castings Trilingual edition) |
ISO 3134-5-1981 |
轻金属及其合金.术语和定义.第5部分:加工和处理方法 |
(Light metals and their alloys; Terms and definitions; Part 5 : Methods of processing and treatment) |
ISO 3136-1983 |
橡胶胶乳.苯乙烯一丁二烯.结合的苯乙烯含量的测定 |
(Rubber latex; Styrene-butadiene; Determination of bound styrene content) |
ISO 3137-1974 |
工业用无水氟化氢.取样 |
(Anhydrous hydrogen fluoride for industrial use; Sampling) |
ISO 3138-1974 |
工业用无水氟化氢.不挥发酸含量的测定.滴定法 |
(Anhydrous hydrogen fluoride for industrial use; Determination of non-volatile acid content; Titrimetric method) |
ISO 3139 AMD 1-1980 |
第1次修改 |
(Aqueous hydrofluoric acid for industrial use; sampling and methods of tests; amendment 1) |
ISO 3139-1976 |
工业用含水氢氟酸.取样和试验方法 |
(Aqueous hydrofluoric acid for industrial use; Sampling and methods of test) |
ISO 314-1981 |
锰矿石.二氧化碳含量的测定.重量法 |
(Manganese ores; Determination of carbon dioxide content; Gravimetric method) |
ISO 3140-1990 |
用机械加工榨取的甜橙油 |
(Oil of sweet orange Citrus sinensis (Linnaeus) Obsbeck obtained by mechanical treatment) |
ISO 3141-1997 |
丁香叶油 |
(Oil of clove leaves [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]) |
ISO 3142-1997 |
丁香花油 |
(Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]) |
ISO 3143-1997 |
丁香茎油 |
(Oil of clove stems [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]) |
ISO 3144-1974 |
工业用二硫化碳.取样和试验方法 |
(Carbon disulphide for industrial use; Sampling and methods of test) |
ISO 3146 Technical Corrigendum 1-2002 |
塑料.用毛细管和偏振显微镜测定半晶状聚合物的熔化性能(熔化温度或熔化区域).技术勘误1 |
(Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods; Technical Corrigendum 1) |
ISO 3146-2000 |
塑料.用毛细管和偏振显微镜测定半晶状聚合物的熔化性能(熔化温度或熔化区域) |
(Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods) |
ISO 3147-1975 |
热交换器.供水或供汽主回路的热平衡检验.原则和试验要求 |
(Heat exchangers; Verification of thermal balance of water-fed or steam-fed primary circuits; Principles and test requirements) |
ISO 3148-1975 |
散热器、换流器和同类设备.散热率的测定.封闭式气冷室试验法 |
(Radiators, convectors and similar appliances; Determination of thermal output; Test method using air-cooled closed booth) |
ISO 3149-1975 |
散热器、换流器和同类设备.散热率的测定.封闭式液冷室试验法 |
(Radiators, convectors and similar appliances; Determination of thermal output; Test method using liquid-cooled closed booth) |
ISO 315-1984 |
锰矿石和锰精矿.镍含量的测定.丁二酮肟光谱测定法和原子吸收光谱测定法 |
(Manganese ores and concentrates; Determination of nickel content; Dimethylglyoxime spectrometric method and flame atomic absorption spectrometric method) |
ISO 3150-1975 |
散热器、换流器和同类设备.热功率的计算及其结果的表达形式 |
(Radiators, convectors and similar appliances; Calculation of thermal output and presentation of results) |
ISO 3154-1988 |
矿井提升用的绞合钢丝绳.交货的技术要求 |
(Stranded wire ropes for mine hoisting; technical delivery requirements) |
ISO 3155-1976 |
矿井提升用的绞合钢丝绳.分组构成.特性和试验 |
(Stranded wire ropes for mine hoisting; Fibre components; Characteristics and tests) |
ISO 3156-1976 |
矿井提升用的绞合钢丝绳.防锈剂.润滑剂和维修保养.特性和试验 |
(Stranded wire ropes for mine hoisting; Impregnating compounds, lubricants and service dressings; Characteristics and tests) |
ISO 3157-1991 |
计时仪表用的辐射发光.时间测量仪表的辐射发光.规范 |
(Radioluminescence for time measurement instruments; specifications) |
ISO 3158-1976 |
计时仪表.检验方位的标识 |
(Timekeeping instruments; Symbolization of control positions) |
ISO 3159-1976 |
计时仪表.有弹簧平衡摆的手表 |
(Timekeeping instruments; Wrist-chronometers with spring balance oscillator) |
ISO 316-1982 |
锰矿石.钴含量的测定.亚硝基R盐光度测定法 |
(Manganese ores; Determination of cobalt content; Nitroso-R-salt photometric method) |
ISO 3160-1 AMD 1-2000 |
表壳和附件.金合金壳.第1部分:一般要求.修改件1 |
(Watch-cases and accessories - Gold alloy coverings - Part 1: General requirements; Amendment 1) |
ISO 3160-1-1998 |
表壳和附件.金合金壳.第1部分:一般要求 |
(Watch-cases and accessories - Gold alloy coverings - Part 1: General requirements) |
ISO 3160-2-2003 |
表壳和附件.金合金壳.第2部分:光洁度、厚度、抗腐蚀性和粘附性测定 |
(Watch-cases and accessories - Gold alloy coverings - Part 2: Determination of fineness, thickness, corrosion resistance and adhesion) |
ISO 3160-2-2003 |
表壳和附件.金合金壳.第2部分:光洁度、厚度、抗腐蚀性和粘附性测定 |
|
ISO 3160-3-1993 |
表壳和附件.金合金壳.第3部分:标准厚度表层耐磨试验 |
(Watch cases and accessories; gold alloy coverings; part 3: abrasion resistance tests of a type of coating on standard gauges) |
ISO 3161-1999 |
航空航天.UNJ螺纹.一般要求和限制尺寸 |
(Aerospace - UNJ threads - General requirements and limit dimensions) |
ISO 3164-1995 |
土方机械.保护结构的实验室评定.偏差极限容量规范 |
(Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume) |
ISO 3165-1976 |
工业用化学制品取样.取样的安全性 |
(Sampling of chemical products for industrial use; Safety in sampling) |
ISO 3166-1-1997 |
国家和他们的地区名的代码表示法.第1部分:地区代码 |
(Codes for the representation of names of countries and their subdivisions - Part 1: Country codes) |
ISO 3166-2-1998 |
国家和他们的地区名的代码表示法.第2部分:国家地区代码 |
(Codes for the representation of names of countries and their subdivisions - Part 2: Country subdivision code) |
ISO 3166-3-1999 |
国家及其地区名的代码表示法.第3部分:国家曾用名代码 |
(Codes for the representation of names of countries and their subdivisions - Part 3: Code for formerly used names of countries) |