标准号 |
中文名称 |
英文名称 |
| ISO 7176-7-1998 |
轮椅.第7部分:座椅和轮子尺寸的测量 |
Wheelchairs - Part 7: Measurement of seating and wheel dimensions |
| ISO 7176-8-1998 |
轮椅.第8部分:静态强度、冲击强度和疲劳强度的要求和试验方法 |
Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths |
| ISO 7176-9-2001 |
轮椅.第9部分:电动轮椅气候试验 |
Wheelchairs - Part 9: Climatic tests for electric wheelchairs |
| ISO 718-1990 |
实验室玻璃器皿.热冲击和热冲击强度.试验方法 |
Laboratory glassware; thermal shock and thermal shock endurance; test methods |
| ISO 7180-1986 |
气压传动.气缸.缸筒和气口螺纹规格 |
Pneumatic fluid power; Cylinders; Bore and port thread sizes |
| ISO 7181-1991 |
液压传动.液压缸.缸筒和活塞杆截面比 |
Hydraulic fluid power; cylinders; bore and rod area ratios |
| ISO 7182-1984 |
声学.在操作者位置上测量链锯发出的气载的噪音 |
Acoustics; Measurement at the operator`s position of airborne noise emitted by chain saws |
| ISO 7183-1986 |
压缩空气干燥机.规范和试验 |
Compressed air dryers; Specifications and testing |
| ISO 7183-2-1996 |
压缩空气干燥机.第2部分:性能等级 |
Compressed air dryers - Part 2: Performance ratings |
| ISO 7186-1996 |
污水工程用球墨铸铁 |
Ductile iron products for sewage applications |
| ISO 7187-1995 |
摄影技术.直接彩色照片材料.ISO感光度的测定 |
Photography - Materials for direct-positive colour-print cameras - Determination of ISO speed |
| ISO 7188-1994 |
声学.在典型的城市行车条件下客车发出的噪音测量 |
Acoustics - Measurement of noise emitted by passenger cars under conditions representative of urban driving |
| ISO 7189-1983 |
连续机械装卸设备.挡板式输送机.设计规则 |
Continuous mechanical handling equipment; Apron conveyors; Design rules |
| ISO 719-1985 |
玻璃.玻璃晶粒在98℃下的耐水解性.试验方法和分类 |
Glass; Hydrolytic resistance of glass grains at 98 degrees C; Method of test and classification |
| ISO 7190-1981 |
连续机械装卸设备.斗式提升机.分类 |
Continuous mechanical handling equipment; Bucket elevators; Classification Bilingual edition |
| ISO 7193-1985 |
轮椅.最大轮廓尺寸 |
Wheelchairs; Maximum overall dimensions |
| ISO 7194-1983 |
封闭管道内液体流量测量.利用流速计或皮托静压管对圆形管道中不均匀成旋涡状态流量测量的速度--面积法 |
Measurement of fluid flow in closed conduits; Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes |
| ISO 7195-1993 |
六氟化铀的运输包装 |
Packaging of uranium hexafluoride (UF) for transport |
| ISO 7196-1995 |
声学.次声测量用频率加权特性 |
Acoustics - Frequency-weighting characteristic for infrasound measurements |
| ISO 7197-1997 |
神经外科植入物.无菌的、一次性使用的脑积水分流管和组件 |
Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components |
| ISO 7198-1998 |
心血管植入物.血管修复术 |
Cardiovascular implants - Tubular vascular prostheses |
| ISO 7199-1996 |
心血管植入物和人工器官.血液-氧气交换机(氧合器) |
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) |
| ISO 720-1985 |
玻璃.玻璃晶粒在121 ℃下的耐水解性.试验方法和分类 |
Glass; Hydrolytic resistance of glass grains at 121 degrees C; Method of test and classification |
| ISO 7200-1984 |
技术制图.标题栏 |
Technical drawings; Title blocks |
| ISO 7200-2004 |
技术产品文件.标题栏和文件标题中的数据字段 |
|
| ISO 7200-2004 |
技术产品文件.标题栏和文件标题中的数据字段 |
|
| ISO 7201-1-1989 |
火灾防护措施.灭火介质.卤代烃.第1部分:聚四氟乙烯1211和聚四氟乙烯1301规范 |
Fire protection; fire extinguishing media; halogenated hydrocarbons; part 1: specifictions for halon 1211 and halon 1301 |
| ISO 7201-2-1991 |
火灾防护措施.灭火介质.卤代烃.第2部分:聚四氟乙烯1211和聚四氟乙烯1301安全操作和运输规程的实施标准 |
Fire extinguishing media; halogenated hydrocarbons; part 2: code of practice for safe handling and transfer procedures of halon 1211 and halon 1301 |
| ISO 7202-1987 |
防火.灭火介质.粉剂 |
Fire protection; Fire extinguishing media; Powder |
| ISO 7203-1-1995 |
灭火器介质.泡末浓缩物.第1部分:不溶于水的液体顶施用低膨胀泡沫浓缩物规范 |
Fire extinguishing media - Foam concentrates - Part 1: Specification for low expansion foam concentrates for top application to water-immiscible liquids |
| ISO 7203-2-1995 |
灭火器介质.泡末浓缩物.第2部分:不溶于水的液体顶施用高膨胀泡沫浓缩物及介质规范 |
Fire extinguishing media - Foam concentrates - Part 2: Specification for medium and high expansion foam concentrates for top application to water-immiscible liquids |
| ISO 7203-3-1999 |
灭火介质.泡末浓缩物.第3部分:可溶于水的液体顶施用低膨胀泡沫浓缩物规范 |
Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for top application to water-miscible liquids |
| ISO 7205-1986 |
放射性核检验仪.为固定装置设计的检验仪 |
Radionuclide gauges; Gauges designed for permanent installation |
| ISO 7206-1-1995 |
外科植入物.部分和全部髋关节修复术.第1部分:分类、尺寸标注 |
Implants for surgery - Partial and total hip joint prostheses - Part 1: Classification and designation of dimensions |
| ISO 7206-10-2003 |
外科植入物.部分和全髋关节假体.第10部分:预制股骨头耐静荷载的测定 |
|
| ISO 7206-2-1996 |
外科植入物.部分和全部髋关节修复术.第2部分:金属的、陶瓷的和塑料等等材料制的关节表面 |
Implants for surgery - Partial and total hip joint prostheses - Part 2: Articulating surfaces made of metallic, ceramic and plastics materials |
| ISO 7206-4-2002 |
外科植入物.部分和全部髋关节修复术.第4部分:干股骨神经组件耐久性能的测定 |
Implants for surgery - Partial and total hip joint prostheses - Part 4: Determination of endurance properties of stemmed femoral components |
| ISO 7206-6-1992 |
外科植入物.部分和全部髋关节修复术.第6部分:干股骨组件的头和颈部耐久性能的测定 |
Implants for surgery; partial and total hip joint prostheses; part 6: determination of endurance properties of head and neck region of stemmed femoral components |
| ISO 7206-8-1995 |
外科植入物.部分和全部髋关节修复术.第8部分:无扭曲使用股骨部件的耐久性能 |
Implants for surgery - Partial and total hip joint prostheses - Part 8: Endurance performance of stemmed femoral components with application of torsion |
| ISO 7207-1-1994 |
外科植入物.部分和全部膝关节修复术用股骨和胫骨组和件.第1部分:分类、定义和尺寸要求 |
Implants for surgery - Femoral and tibial components for partial and total knee joint prostheses - Part 1: Classification, definitions and designation of dimensions |
| ISO 7207-2-1998 |
外科植入物.部分和全部膝关节修复术用组件.第2部分:金属、陶瓷和塑料材料制关节表面 |
Implants for surgery - Components for partial and total knee-joint prostheses - Part 2: Articulating surfaces made of metal, ceramic and plastics materials |
| ISO 7208-1999 |
脱脂乳、乳清和乳酪.脂肪含量的测定.重量分析法(参照法) |
Skimmed milk, whey and buttermilk - Determination of fat content - Gravimetric method (Reference method) |
| ISO 721-1991 |
凿岩设备.整体钻杆 |
Rock drilling equipment; integral stems |
| ISO 7210-1997 |
卷烟烟雾常规分析器.补充试验方法 |
Routine analytical cigarette-smoking machines - Additional test methods |
| ISO 7211-1-1984 |
纺织品.机织物.结构.分析方法.第1部分:穿综、穿筘及提综的织造图和平面的表示方法 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 1 : Methods for the presentation of a weave diagram and plans for drafting, denting and lifting |
| ISO 7211-2-1984 |
纺织品.机织物.结构.分析方法.第2部分:单位长度纱线数的测定 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 2 : Determination of number of threads per unit length |
| ISO 7211-3-1984 |
纺织品.机织物.结构.分析方法.第3部分:织物纱线卷曲性的测定 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 3 : Determination of crimp of yarn in fabric |
| ISO 7211-4-1984 |
纺织品.机织物.结构.分析方法.第4部分:无纤维纱捻度的测定 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 4 : Determination of twist in yarn removed from fabric |
| ISO 7211-5-1984 |
纺织品.机织物.结构.分析方法.第5部分:无纤维纱线密度的测定 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 5 : Determination of linear density of yarn removed from fabric |
| ISO 7211-6-1984 |
纺织品.机织物.结构.分析方法.第6部分:织物单位面积经纱和纬纱质量(物质)的测定 |
Textiles; Woven fabrics; Construction; Methods of analysis; Part 6 : Determination of the mass of warp and weft per unit area of fabric |
| ISO 7212-1986 |
电离辐射防护层.50-100mm厚的铅屏蔽装置 |
Enclosures for protection against ionizing radiation; Lead shielding units for 50 mm and 100 mm thick walls |
| ISO 7213-1981 |
纸浆.试验取样 |
Pulps; Sampling for testing |
| ISO 7214-1998 |
泡沫塑料.聚乙烯.试验方法 |
Cellular plastics - Polyethylene - Methods of test |
| ISO 7215-1995 |
铁矿石.相对还原性的测定 |
Iron ores - Determination of relative reducibility |
| ISO 7216-1992 |
声学.农林轮式拖拉机和自行式机械.行走噪声的测量 |
Acoustics; agricultural and forestry wheeled tractors and self-propelled machines; measurement of noise emitted when in motion |
| ISO 7218 AMD 1-2001 |
食品和动物饲料微生物学.微生物检验的一般规则.修改件1 |
Microbiology of food and animal feeding stuffs - General rules for microbiological examinations; Amendment 1 |
| ISO 7218-1996 |
食品和动物饲料的微生物学.微生物检验的通则 |
Microbiology of food and animal feeding stuffs - General rules for microbiological examinations |
| ISO 722-1991 |
凿岩设备.空心六角形钻杆.棒材 |
Rock drilling equipment; hollow drill steels in bar form, hexagonal and round |
| ISO 7220 Technical Corrigendum 1-2001 |
信息和文献.标准目录的表示.技术勘误1 |
Information and documentation - Presentation of catalogues of standards; Technical Corrigendum 1 |
| ISO 7220-1996 |
信息和文献工作.标准的目录表示 |
Information and documentation - Presentation of catalogues of standards |
| ISO 7221-1984 |
造船和海上建筑物.托架上的船载驳船,系列1.主要技术要求 |
Shipbuilding and marine structures; Shipborne barges, series 1, on barge carriers; Principal technical requirements |
| ISO 7222-1985 |
造船.船载驳船,系列2.主要尺寸 |
Shipbuilding; Shipborne barges, series 2; Main dimensions |
| ISO 7224-1983 |
葡萄栽培和葡萄酒酿制设备.捣碎泵.试验方法 |
Equipment for vine cultivation and wine making; Mash pumps; Methods of test |
| ISO 7226-1988 |
六角形板牙的尺寸 |
Hexagonal dienuts |
| ISO 7227 AMD 1-2004 |
道路车辆.照明和光信号装置.词汇.修改件1 |
|
| ISO 7227-1987 |
道路车辆.照明灯和光信号装置.词汇.三种语言版 |
Road vehicles; Lighting and light signalling devices; Vocabulary Trilingual edition |
| ISO 7229-1997 |
橡胶或塑料涂覆织物.透气性测量 |
Rubber- or plastics-coated fabrics - Measurement of gas permeability |
| ISO 723-1991 |
凿岩设备.空心六角形钻钢的锻造柄和卡紧套环 |
Rock drilling equipment; forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels |
| ISO 7231-1984 |
泡沫柔性聚合材料.恒定压降下的气流值估计法 |
Polymeric materials, cellular flexible; Method of assessment of air flow value at constant pressure-drop |
| ISO 7232-1986 |
橡胶或塑料鞋靴.抗静电凉鞋和木底鞋 |
Rubber or plastics footwear; Antistatic sandals, sabots and clogs |
| ISO 7233-1991 |
橡胶和塑料软管和软管组件.吸引阻力测定 |
Rubber and plastics hoses and hose assemblies; determination of suction resistance |
| ISO 7235-1991 |
声学.消音输送道测量步骤.插入损耗、流动噪声和压力损失 |
Acoustics; measurement procedures for ducted silencers; insertion loss, flow noise and total pressure loss |
| ISO 7235-2003 |
声学.管道消音器和空气界面装置的实验室测量步骤.插入损失、流动噪声和总压损失 |
(Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss) |
| ISO 7235-2003 |
声学.管道消音器和空气界面装置的实验室测量步骤.插入损失、流动噪声和总压损失 |
|
| ISO 7236-1991 |
内河船.顶推式船用可拆换信号杆.安装装置 |
Inland navigation vessels; demountable signal masts for push-tows; mounting attachment |
| ISO 7237 AMD 1-2001 |
旅居车.质量和尺寸.词汇.修改件1 |
Caravans - Masses and dimensions - Vocabulary; Amendment 1 |
| ISO 7237-1993 |
旅居车.质量和尺寸.词汇 |
Caravans; masses and dimensions; vocabulary |
| ISO 7238-1983 |
黄油.乳清pH值的测定.电位滴定法 |
Butter; Determination of pH of the serum; Potentiometric method |
| ISO 7238-2004 |
奶油.乳清pH值的测定.电位滴定法 |
|
| ISO 724-1993 |
ISO一般用途米制螺纹.基本尺寸 |
ISO general-purpose metric screw threads; basic dimensions |
| ISO 7240-1-1988 |
火灾探测和报警系统.第1部分:总论和定义 |
Fire detection and alarm systems; part 1: general and definitions |
| ISO 7240-15-2004 |
火灾探测和报警系统.第15部分:多测头火灾探测器 |
|
| ISO 7240-2-2003 |
火灾探测和报警系统.第2部分:控制和指示设备 |
(Fire detection and alarm systems - Part 2: Control and indicating equipment) |
| ISO 7240-2-2003 |
火灾探测和报警系统.第2部分:控制和指示设备 |
|
| ISO 7240-4-2003 |
火灾探测和报警系统.第4部分:供电设备 |
(Fire detection and alarm systems - Part 4: Power supply equipment) |
| ISO 7240-4-2003 |
火灾探测和报警系统.第4部分:供电设备 |
|
| ISO 7240-5-2003 |
火灾探测和报警系统.第5部分:点式热探测器 |
|
| ISO 7240-6-2004 |
火灾探测和报警系统.第6部分:用电化学电池的一氧化碳火灾探测器 |
|
| ISO 7240-7-2003 |
火灾探测和报警系统.第7部分:使用散射光、透射光或电离作用的尖形烟雾探测器 |
(Fire detection and alarm systems - Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization) |
| ISO 7240-7-2003 |
火灾探测和报警系统.第7部分:使用散射光、透射光或电离作用的尖形烟雾探测器 |
|
| ISO 7241-1-1987 |
液压传动.速接联轴节.第1部分:尺寸和要求 |
Hydraulic fluid power; Quick-action couplings; Part 1 : Dimensions and requirements |
| ISO 7241-2-2000 |
液压传动.速动连接件.第2部分:试验方法 |
Hydraulic fluid power - Quick-action couplings - Part 2: Test methods |
| ISO 7243-1989 |
热环境.根据湿球玻璃温度计指示数对操作人员热影响的估算 |
Hot environments; estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) |
| ISO 7244-1984 |
空气配给和空气扩散.风门和阀门的空气动力试验 |
Air distribution and air diffusion; Aerodynamic testing of dampers and valves |
| ISO 7245-1984 |
丙烯腈一丁二烯一苯乙烯共聚物(ABS)管和配件.模制和挤压材料的一般规范 |
Pipes and fittings of acrylonitrile-butadiene- styrene (ABS); General specification for moulding and extrusion materials |
| ISO 7246-1984 |
丙烯腈/苯乙烯/丙烯酸酯(ASA)管和配件.模制和挤压材料的一般规范 |
Pipes and fittings of acrylonitrile/styrene/ acrylester (ASA); General specification for moulding and extrusion materials |
| ISO 7250-1996 |
工艺设计相关的基本人体测量 |
Basic human body measurements for technological design |
| ISO 7251-1993 |
微生物学.预测大肠杆菌计数的一般导则.最大概率技术 |
Microbiology; general guidance for enumeration of presumptive Escherichia coli; most probable number technique |
| ISO 7252-1984 |
色漆和清漆.汞总含量的测定.无焰原子吸收光谱测定法 |
Paints and varnishes; Determination of total mercury; Flameless atomic absorption spectrometric method |
| ISO 7253-1996 |
涂料和清漆.耐中性盐雾的测定 |
Paints and varnishes - Determination of resistance to neutral salt spray (fog) |
| ISO 7255-1985 |
造船.船舶运行控制机组.词汇.三种语言版 |
Shipbuilding; Active control units of ships; Vocabulary Trilingual edition |
| ISO 7256-1-1984 |
播种设备.试验方法.第1部分:单粒点播机(精密播种机) |
Sowing equipment; Test methods; Part 1; Single seed drills (precision drills) |
| ISO 7256-2-1984 |
播种设备.试验方法.第2部分:条播机 |
Sowing equipment; Test methods; Part 2 : Seed drills for sowing in lines |
| ISO 7257-1983 |
飞机.液压管道接头和配件.旋转的弯曲试验 |
Aircraft; Hydraulic tubing joints and fittings; Rotary flexure test |
| ISO 7258-1984 |
航空航天设备的聚四氟乙烯(PTFE)管材.比重和相对比重的测定方法 |
Polytetrafluoroethylene (PTFE) tubing for aerospace applications; Methods for the determination of the density and relative density |
| ISO 7259-1988 |
地下用的按钮操纵的铸铁闸阀 |
Predominantly key-operated cast iron gate valves for underground use |
| ISO 7263-1994 |
瓦楞纸.试验起瓦楞后耐压扁性的测定 |
Corrugating medium - Determination of the flat crush resistance after laboratory fluting |
| ISO 7266-1984 |
铜和铜合金.硫含量的测定.燃烧滴定法 |
Copper and copper alloys; Determination of sulfur content; Combustion titrimetric method |
| ISO 7266-1984 |
铜和铜合金.硫含量的测定.燃烧滴定法 |
Copper and copper alloys; Determination of sulfur content; Combustion titrimetric method |
| ISO 7267-1-1997 |
橡胶包覆的辊筒.表观硬度的测定.第1部分:国际橡胶硬度标度(IRHD)法 |
Rubber-covered rollers - Determination of apparent hardness - Part 1: IRHD method |
| ISO 7267-2-1986 |
橡胶涂覆滚子.表观硬度的测定.第2部分:肖氏(SHORE)硬度计法 |
Rubber-covered rollers; Determination of apparent hardness; Part 2 : Shore-type durometer method |
| ISO 7267-3-1988 |
橡胶涂覆滚子.表面硬度的测量.第3部分:普西-琼斯(Ppusey and Jones)法 |
Rubber-covered rollers; determination of apparent hardness; part 3: Pusey and Jones method |
| ISO 7268 AMD 1-1984 |
第1次修改 |
Amendment 1-1984 |
| ISO 7268-1983 |
管件.公称压力的定义 |
Pipe components; Definition of nominal pressure |
| ISO 7268-1983 |
管件.公称压力的定义 |
Pipe components; Definition of nominal pressure |
| ISO 7269-1995 |
橡胶.游离硫离子的测定 |
Rubber - Determination of free sulfur |
| ISO 727-1-2002 |
压力管件用由未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的带普通管套的管配件.第1部分:米制系列 |
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 1: Metric series |
| ISO 727-2-2002 |
压力管件用由未增塑的聚氯乙烯,氯化聚氯乙烯或丙烯腈/丁二烯/苯乙烯制的带普通管套的管配件.第2部分:英制系列 |
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Part 2: Inch-based series |
| ISO 7270-1-2003 |
橡胶.热解气相色谱分析法.第1部分:聚合物(单聚合物和共混聚合物)的标识 |
(Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1: Identification of polymers (single polymers and polymer blends) ) |
| ISO 7270-1-2003 |
橡胶.热解气相色谱分析法.第1部分:聚合物(单聚合物和共混聚合物)的标识 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com