标准号 |
中文名称 |
英文名称 |
ISO 12958-1999 |
土工和土工相关产品.水平水流容量的测定 |
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane |
ISO 12965-2000 |
丁二烯橡胶.用红外线光谱法测定微观结构 |
Butadiene rubber - Determination of microstructure by infra-red spectrometry |
ISO 12977-1999 |
铝制品用含碳物质.电极用沥青.挥发物含量的测定 |
Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of volatile matter content |
ISO 12979-1999 |
铝制品用含碳物质.电极用沥青.喹啉不溶物中C/H比率的测定 |
Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of C/H ratio in the quinoline-insoluble fraction |
ISO 12980-2000 |
用于铝生产的碳素物.电极用未煅烧焦炭和煅烧焦炭.用X射线荧光光谱法分析 |
Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method |
ISO 12981-1-2000 |
铝生产中使用的含碳材料.煅烧焦炭.二氧化碳的活性测定.第1部分:质量损失法 |
Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method |
ISO 12982-1-2000 |
生产铝用含碳材料.煅烧焦炭.对空气活性的测定.第1部分:点火温度法 |
Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to air - Part 1: Ignition temperature method |
ISO 12984-2000 |
用于生产铝的碳素材料.煅烧焦炭.粒度分布的测定 |
Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution |
ISO 12985-1-2000 |
用于生产铝的碳素材料.焙烧阳极和阴极块.第1部分:用尺寸法测定表观密度 |
Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 1: Determination of apparent density using a dimensions method |
ISO 12985-2-2000 |
用于生产铝的碳素材料.焙烧阳极和阴极块.第2部分:用静流法测定表观密度和开口孔隙率 |
Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 2: Determination of apparent density and of open porosity using a hydrostatic method |
ISO 12986-1-2000 |
用于生产铝的碳素材料.预焙烧阳极和阴极块.第1部分:用三点法测定抗弯强度/剪切强度 |
Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by a three-point method |
ISO 12987-2004 |
铝制品用碳质材料.阳极、阴极块、侧壁砖和烤灌糊.使用比较法进行热传导性的测定 |
|
ISO 12988-1-2000 |
用于生产铝的碳素物.焙烧阳极.二氧化碳活性的测定.第1部分:质量损耗方法 |
Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method |
ISO 12988-2-2004 |
铝生产用碳素材料.焙烧阳极.二氧化碳反应性的测定.第2部分:热解重量分析法 |
|
ISO 12989-1-2000 |
铝生产中用的碳素材料.焙烧阳极和侧壁砖.测定对空气的挥发性 |
Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 1: Loss in mass method |
ISO 12989-2-2004 |
铝生产用碳素材料.焙烧阳极和部碳块.空气反应性的测定.第2部分:热重分析法 |
|
ISO 12992-1995 |
塑料制品.塑料薄膜和薄板垂直燃烧蔓延程序的测定 |
Plastics - Vertical flame spread determination for film and sheet |
ISO 13-1978 |
压力管线用灰口铁管、特种铸件和灰口铁部件 |
Grey iron pipes, special castings and grey iron parts for pressure main lines |
ISO 13000-1-1997 |
塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和设计 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation |
ISO 13000-2-1997 |
塑料.聚四氟乙烯(PTFE)半成品.第2部分:试样的制备和特性的测定 |
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties |
ISO 13002-1998 |
碳纤维.长丝纱命名体制 |
Carbon fibre - Designation system for filament yarns |
ISO 13003-2003 |
纤维增强塑料.周期性荷载条件下疲劳特性的测定 |
|
ISO 13006-1998 |
瓷砖.定义、分类、特性和标记 |
Ceramic tiles - Definitions, classification, characteristics and marking |
ISO 13007-1-2004 |
瓷砖.灰浆和胶粘剂.第1部分:胶粘剂的术语、定义和规范 |
|
ISO 13007-3-2004 |
瓷砖.灰浆和胶粘剂.第3部分:灰浆的术语、定义和规范 |
|
ISO 13012 Technical Corrigendum 1-1999 |
滚动轴承.线性运动.循环球,套管型.附件.技术勘误1 |
Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories; Technical corrigendum 1 |
ISO 13012-1998 |
套筒式线性运动循环球滚动轴承.附件 |
Rolling bearings, linear motion, recirculating ball, sleeve type - Accessories |
ISO 1302-2002 |
产品几何量技术规范.技术产品文件中表面结构的表示方式 |
Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation |
ISO 1304-1999 |
橡胶配方配合剂.炭黑.碘吸收值的测定.滴定法 |
Rubber compounding ingredients - Carbon black - Determination of iodine adsorption number - Titrimetric method |
ISO 13041-1-2004 |
数控立式车床和转向中心的试验条件.第1部分:有水平工件夹紧轴的机床的几何试验 |
|
ISO 13041-4-2004 |
数控立式车床和转向中心的试验条件.第4部分:线性和旋转轴定位的精确度和可重复性 |
|
ISO 13041-7-2004 |
数控立式车床和转向中心的试验条件.第7部分:坐标平面上等高线特性评价 |
|
ISO 13041-8-2004 |
数控立式车床和转向中心的试验条件.第8部分:热变形的评价 |
|
ISO 13050-1999 |
曲线齿状同步皮带传动系统 |
Curvilinear toothed synchronous belt drive systems |
ISO 1306-1995 |
橡胶配方配合剂.炭黑.(粒状).浇铸密度的测定 |
Rubber compounding ingredients - Carbon black (pelletized) - Determination of pour density |
ISO 1307-1992 |
工业通用橡胶和塑料软管.孔直径和公差.长度公差 |
Rubber and plastics hoses for general-purpose industrial applications; bore diameters and tolerances, and tolerances on length |
ISO 13090-1-1998 |
机械振动和冲击.试验及与人有关的实验安全方面指南.第1部分:机械振动和反复冲击下的试验 |
Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock |
ISO 13091-1-2001 |
机械振动.神经机能障碍评定的振动触感阈.第1部分:指尖上的测量方法 |
Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 1: Methods of measurement at the fingertips |
ISO 13091-2-2003 |
机械振动.评定神经官能紊乱用振动感知阈值.第2部分:指尖测量分析和解释 |
(Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 2: Analysis and interpretation of measurements at the fingertips) |
ISO 13091-2-2003 |
机械振动.评定神经官能紊乱用振动感知阈值.第2部分:指尖测量分析和解释 |
|
ISO 132-1999 |
硫化和热塑橡胶.折曲裂缝和裂缝增长的测定 |
Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) |
ISO 13200-1995 |
起重机.安全信号和危险图示.总则 |
Cranes - Safety signs and hazard pictorials - General principles |
ISO 13202-2003 |
起重机.速度和时间参数的测量 |
(Cranes - Measurement of velocity and time parameters) |
ISO 13202-2003 |
起重机.速度和时间参数的测量 |
|
ISO 13212-1999 |
眼科光学.接触镜保护产品.储存寿命的测定指南 |
Ophthalmic optics - Contact lens care products - Guidelines for the determination of shelf-life |
ISO 13215-2-1999 |
道路车辆.儿童限制系统错用危险的减少.第2部分:正确装配的要求和试验过程(薄板法) |
Road vehicles - Reduction of misuse risk of child restraint systems - Part 2: Requirements and test procedures for correct installation (panel method) |
ISO 13215-3-1999 |
道路车辆.儿童固定系统错使用危险性的降低.第3部分:用错使用模式和效果分析(MMEA)对错使用的预测和评估 |
Road vehicles - Reduction of misuse risk of child restraint systems - Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA) |
ISO 13216-1-1999 |
道路车辆.儿童减震系统用车辆锚具和锚具附件.第1部分:座位弯曲锚具及附件 |
Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1: Seat bight anchorages and attachments |
ISO 13216-2-2004 |
道路车辆.儿童约束系统在车内的固定点及主固定点的安装.第2部分:顶部系留的固定点及其连接 |
|
ISO 13218-1998 |
道路车辆.儿童保护系统.有儿童乘客的事故报告格式 |
Road vehicles - Child restraint systems - Report form for accidents involving child passengers |
ISO 13226-1999 |
橡胶.液体对硫化橡胶影响的表征用标准参考弹性体(SREs) |
Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
ISO 13230-1999 |
眼科光学.条形码规范 |
Ophthalmic optics - Bar code specifications |
ISO 13232-1-1996 |
摩托车.适用于摩托车驾驶员冲击保护设备的试验和分析程序.第1部分:定义、符号和一般考虑 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 1: Definitions, symbols and general considerations |
ISO 13232-2-1996 |
摩托车.适用于摩托车驾驶员冲击保护设备的试验和分析程序.第2部分:与事故数据有关的冲击条件的定义 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 2: Definition of impact conditions in relation to accident data |
ISO 13232-3-1996 |
摩托车.适用于摩托车驾驶员冲击保护设备的试验和分析程序.第3部分:人体测量的冲击模型 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 3: Anthropometric impact dummy |
ISO 13232-4-1996 |
摩托车.适用于摩托车驾驶员冲击保护设备的试验和分析程序.第4部分:被测量的变量、仪器仪表和测量程序 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 4: Variables to be measured, instrumentation and measurement procedures |
ISO 13232-5-1996 |
摩托车.适用于摩托车驾驶员冲击保护设备的试验和分析程序.第5部分:损害系数和保险额/保险赔偿费分析 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 5: Injury indices and risk/benefit analysis |
ISO 13232-6-1996 |
摩托车.适用于摩托车驾驶员冲击保护设备的试验和分析程序.第6部分:全尺度内的冲击试验程序 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 6: Full-scale impact-test procedures |
ISO 13232-7-1996 |
摩托车.适用于摩托车驾驶员冲击保护设备的试验和分析程序.第7部分:摩托车冲击试验的计算机模拟演示的标准程序 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests |
ISO 13232-8-1996 |
摩托车.适用于摩托车驾驶员冲击保护设备的试验和分析程序.第8部分:文献工作和报告 |
Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Part 8: Documentation and reports |
ISO 1324-1985 |
实心木拼花地板.橡木条的分类 |
Solid wood parquet; Classification of oak strips |
ISO 13253-1995 |
导管式空调器和气对气加热泵.性能的检测和额定功率 |
Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance |
ISO 13256-1-1998 |
水源热泵.性能试验和功率测量.第1部分:水-气体和盐水-气体热泵 |
Water-source heat pumps - Testing and rating for performance - Part 1: Water-to-air and brine-to-air heat pumps |
ISO 13256-2-1998 |
水源热泵.性能试验和功率测量.第2部分:水-水和盐水-水热泵 |
Water-source heat pumps - Testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps |
ISO 13261-1-1998 |
空调设备和空气源热泵设备的声级额定值.第1部分:无户外管道设备 |
Sound power rating of air-conditioning and air-source heat pump equipment - Part 1: Non-ducted outdoor equipment |
ISO 13261-2-1998 |
空调设备和空气源热泵设备的声级额定值.第2部分:无户内管道设备 |
Sound power rating of air-conditioning and air-source heat pump equipment - Part 2: Non-ducted indoor equipment |
ISO 13276-1997 |
烟草及其制品.烟碱纯度的测定.使用钨硅酸的重量分析法 |
Tobacco and tobacco products - Determination of nicotine purity - Gravimetric method using tungstosilicic acid |
ISO 1328-2-1997 |
圆柱齿轮.ISO 体系的准确度.第2部分:有关放射要素偏差度和输出信息的相应偏差的容许值和定义 |
Cylindrical gears - ISO system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
ISO 13281-1997 |
自动化系统.制造自动化程序环境.建筑物功能 |
Industrial automation systems - Manufacturing Automation Programming Environment (MAPLE) - Functional architecture |
ISO 13281-2-2000 |
工业自动化系统和集成.制造自动化编程环境(MAPLE).第2部分:服务设施和接口 |
Industrial automation systems and integration - Manufacturing Automation Programming Environment (MAPLE) - Part 2: Services and interfaces |
ISO 13284-2003 |
叉车.叉形臂扩展部分和能自由伸缩的叉形臂.技术特性和强度要求 |
(Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements) |
ISO 13284-2003 |
叉车.叉形臂扩展部分和能自由伸缩的叉形臂.技术特性和强度要求 |
|
ISO 13291-1997 |
硫化锌浓度.锌含量的测定.溶解淬取法和EDTA滴定法 |
Zinc sulfide concentrates - Determination of zinc content - Solvent extraction and EDTA titrimetric method |
ISO 13292-1997 |
铜,铅和锌硫化物浓度.抽样偏差的检查和试验方法 |
Copper, lead and zinc sulfide concentrates - Experimental methods for checking the bias of sampling |
ISO 13294-1997 |
牙钻手柄.牙钻气动机 |
Dental handpieces - Dental air-motors |
ISO 13295-1994 |
牙科旋切器.心轴 |
Dental rotary instruments - Mandrels |
ISO 13296 Technical Corrigendum 1-2000 |
柴油发动机.高压燃料喷射管组件.一般要求和尺寸.技术勘误1 |
Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions; Technical Corrigendum 1 |
ISO 13296-1997 |
柴油发动机.高压燃料喷射管组件.一般要求和尺寸 |
Diesel engines - High-pressure fuel injection pipe assemblies - General requirements and dimensions |
ISO 13297-2000 |
小型船舶.电气系统.交流电设备 |
Small craft - Electrical systems - Alternating current installations |
ISO 13299-2003 |
感官分析.方法论.确立感觉曲线的通用指南 |
Sensory analysis - Methodology - General guidance for establishing a sensory profile |
ISO 13299-2003 |
感官分析.方法论.确立感觉曲线的通用指南 |
|
ISO 13301-2002 |
感官分析.方法学.用三点选配(3-AFC)法测定气味、香味和味觉探测阈值的通用指南 |
Sensory analysis - Methodology - General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure |
ISO 13302-2003 |
感官分析.由包装引起的食品味道改变的评定方法 |
(Sensory analysis - Methods for assessing modifications to the flavours of foodstuffs due to packaging) |
ISO 13302-2003 |
感官分析.由包装引起的食品味道改变的评定方法 |
|
ISO 13310-1997 |
铁矿石.用燃烧原子吸收光谱测定法测定锌含量 |
Iron ores - Determination of zinc content - Flame atomic absorption spectrometric method |
ISO 13311-1997 |
铁矿石.用燃烧原子吸收光谱测定法测定铅含量 |
Iron ores - Determination of lead content - Flame atomic absorption spectrometric method |
ISO 13312-1997 |
铁矿石.钾含量的测定.火焰原子吸收分光光度法 |
Iron ores - Determination of potassium content - Flame atomic absorption spectrometric method |
ISO 13313-1997 |
铁矿石.钠含量的测定.火焰原子吸收分光光度法 |
Iron ores - Determination of sodium content - Flame atomic absorption spectrometric method |
ISO 13317-1-2001 |
用重力液体沉淀法测定粒度分布.第1部分:通则和导则 |
Determination of particle size distribution by gravitational liquid sedimentation methods - Part 1: General principles and guidelines |
ISO 13317-2-2001 |
用重力液体沉淀法测定粒度分布.第2部分:固定移液管法 |
Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2: Fixed pipette method |
ISO 13317-3-2001 |
用重力液体沉淀法测定粒度分布.第3部分:X射线重力技术 |
Determination of particle size distribution by gravitational liquid sedimentation methods - Part 3: X-ray gravitational technique |
ISO 13318-1-2001 |
用离心液体沉淀法测定粒度分布.第1部分:通用原则和导则 |
Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1: General principles and guidelines |
ISO 13318-2-2001 |
用离心液体沉淀法测定粒度分布.第2部分:光照离心法 |
Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method |
ISO 13318-3-2004 |
用离心液体沉积法测定粒度分布.第3部分:离心X射线法 |
|
ISO 13319-2000 |
粒度分部的测定.电感应区方法 |
Determination of particle size distributions - Electrical sensing zone method |
ISO 13320-1-1999 |
粒度分析.激光衍射方法.第1部分:一般规则 |
Particle size analysis - Laser diffraction methods - Part 1: General principles |
ISO 13321-1996 |
粒度分析.相关光量子光谱学 |
Particle size analysis - Photon correlation spectroscopy |
ISO 13323-1-2000 |
粒度分布的测定.单粒子光干扰法.第1部分:光干扰问题 |
Determination of particle size distribution - Single-particle light interaction methods - Part 1: Light interaction considerations |
ISO 13325-2003 |
轮胎.轮胎到道路所排声音测量的Coast-by法 |
Tyres - Coast-by methods for measurement of tyre-to-road sound emission |
ISO 13325-2003 |
轮胎.轮胎到道路所排声音测量的Coast-by法 |
|
ISO 13326-1998 |
测量轮胎均匀度的试验方法 |
Test methods for measuring tyre uniformity |
ISO 13327-1998 |
摩托车轮胎.滚动阻力的测量方法 |
Motorcycle tyres - Method of measuring rolling resistance |
ISO 13328-2000 |
摩托车轮胎.轮胎滚动圆周的测量.载重新轮胎 |
Motorcycle tyres - Measurement of tyre rolling circumference - Loaded new tyres |
ISO 13331-1995 |
道路车辆.摩托车燃料箱的开口和注油管.蒸气回收系统 |
Road vehicles - Filler pipes and openings of motor vehicle fuel tanks - Vapour recovery system |
ISO 13332-2000 |
往复式内燃机.在发动机底部测量的发自高速和中速往复式内燃机的结构噪声的试验规范 |
Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet |
ISO 13333-1994 |
地面移动机械.翻斗车身支架和操作舱翻转支架装置 |
Earth-moving machinery - Dumper body support and operator`s cab tilt support devices |
ISO 13337-1997 |
弹簧型直销.轻型,有槽的 |
Spring-type straight pins - Slotted, light duty |
ISO 13340-2001 |
可运输气瓶.不可再充填的气瓶用钢瓶阀门.规范和原型试验 |
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing |
ISO 13340-2001 |
可运输气瓶.不可再充填的气瓶用钢瓶阀门.规范和原型试验 |
Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing |
ISO 13341 Technical Corrigendum 1-1998 |
可运输储气瓶.储气瓶阀的装配.技术勘误1 |
Transportable gas cylinders - Fitting of valves to gas cylinders; Technical Corrigendum 1 |
ISO 13341-1997 |
可运输储气瓶.储气瓶阀配件 |
Transportable gas cylinders - Fitting of valves to gas cylinders |
ISO 13342-1995 |
小型船舶.舷外发动机静推力的测量 |
Small craft - Static thrust measurement for outboard motors |
ISO 13344-1996 |
燃烧流出物致死毒性的测定 |
Determination of the lethal toxic potency of fire effluents |
ISO 13344-2004 |
火焰中致命毒性的评估 |
|
ISO 13347-1-2004 |
工业风扇.标准化实验室条件下风扇声功率级的测定.第1部分:总揽 |
|
ISO 13347-2-2004 |
工业风扇.标准化实验室条件下风扇声功率级的测定.第2部分:混响室法 |
|
ISO 13347-3-2004 |
工业风扇.标准化实验室条件下风扇声功率级的测定.第3部分:包络面法 |
|
ISO 13347-4-2004 |
工业风扇.标准化实验室条件下风扇声功率级的测定.第4部分:声强法 |
|
ISO 13349-1999 |
工业电扇.类别的定义和词汇 |
Industrial fans - Vocabulary and definitions of categories |
ISO 13350-1999 |
工业电扇.射流风扇的性能试验 |
Industrial fans - Performance testing of jet fans |