标准号 |
中文名称 |
英文名称 |
| prEN ISO 787-26-1997 |
颜料和填充料的通用试验方法第26部分：有关着色力与着色剂残余色差的测定加权的K/S值法 |
General methods of test for pigments and extenders - Part 26: Determination of relative tinting strength and residual colour difference of colorants - Weighted K/S value method (ISO/DIS 787-26:1997) |
| prEN ISO 7932-2003 |
微生物学腊状芽孢杆菌计数通用指南30度时菌落计数技术修改A1 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of Bacillus cereus - Colony-count technique at 30 degrees C (ISO/FDIS 7932:2003) / Note: Intended as replacement for EN ISO 7932 (1997-12). |
| prEN ISO 7937-2002 |
食品和动物饲料的微生物学产气荚膜杆菌计数的水平法菌落计数技术 |
Microbiology of food and animal feeding stuffs - Horizontal method for enumeration of Clostridium perfringens - Colony-count technique (ISO/DIS 7937:2002) |
| prEN ISO 7998-2001 |
眼科光学眼镜架词汇及术语对照表 |
Ophthalmic optics - Spectacle frames - Vocabulary and lists of equivalent terms (ISO/DIS 7998:2001) |
| prEN ISO 8062-1-1999 |
几何产品技术规范(GPS)模件的尺寸和几何公差第1部分：词汇 |
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO/DIS 8062-1:1999) |
| prEN ISO 8062-2-1999 |
几何产品技术规范(GPS)模件的尺寸和几何公差第2部分：铸造的一般几何尺寸公差与机加工余量 |
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: General dimensional and geometrical tolerances and machining allowances for castings (ISO/DIS 8062-2:1999) |
| prEN ISO 8106-2003 |
玻璃容器用重量法测定容量试验方法 |
Glass containers - Determination of capacity by gravimetric method - Test method (ISO/FDIS 8106:2003) |
| prEN ISO 8113-2003 |
玻璃容器抗垂直负荷性试验方法 |
Glass containers - Resistance to vertical load - Test method (ISO/FDIS 8113:2003) |
| prEN ISO 8256-2002 |
塑料拉伸冲击强度测定 |
Plastics - Determination of tensile-impact strength (ISO/DIS 8256:2002) |
| prEN ISO 8339-2001 |
房屋建筑密封件拉伸性能测定 |
Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO/DIS 8339:2001) |
| prEN ISO 8340-2001 |
房屋建筑密封件延伸状态的拉伸性能测定 |
Building construction - Sealants - Determination of tensile properties at maintained extension (ISO/DIS 8340:2001) |
| prEN ISO 8442-5-2002 |
与食品接触的材料和制品刀具与凹形餐具第5部分：餐具的锐利和刀口保持力的规范 |
Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 5: Specification for sharpness and edge retention test of cutlery (ISO/FDIS 8442-5:2002) |
| prEN ISO 8601-2002 |
数据和交换格式信息交换时间和日期的表示 |
Data elements and interchange formats - Information interchange - Representation of dates and times (ISO 8601:2000) |
| prEN ISO 8611-1-2000 |
搬运货物用托盘第1部分：平托盘的试验方法 |
Pallets for materials handling - Part 1: Test methods for flat pallets (ISO/DIS 8611-1:2000) |
| prEN ISO 8835-4-2001 |
吸入式麻醉剂系统第4部分：麻醉蒸气传递设备 |
Inhalational anaesthesia systems - Part 4: Anaesthetic vapour delivery devices (ISO/DIS 8835-4:2001) |
| prEN ISO 8835-5-2003 |
吸入式麻醉系统第5部分：麻醉通风设备的要求 |
Inhalational anaesthesia systems - Part 5: Requirements for anaesthetic ventilators (ISO/DIS 8835-5:2003) / Note: Intended as replacement for EN 740 (1998-08). |
| prEN ISO 8847-1998 |
小艇操舵装置钢索及滑轮系统 |
Small craft - Steering gear - Wire rope and pulley systems (ISO/DIS 8847:1998) |
| prEN ISO 8980-3-2003 |
眼科光学未切边成品眼镜片第3部分：透光性规范和试验方法 |
Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO/FDIS 8980-3:2003) / Note: Intended as replacement for EN ISO 8980-3 (1999-06). |
| prEN ISO 9018-2003 |
金属材料焊缝的破坏性试验十字形与重叠 形接头的拉力试验 |
Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO/FDIS 9018:2003) |
| prEN ISO 9121-1996 |
产品几何技术规范（GPS）尺寸测量仪：两点连接内径千分尺设计与度量要求 |
Geometrical product specification (GPS) - Dimensional measuring instruments: Internal micrometers with two point contact - Design and metrological requirements (ISO/DIS 9121:1996) |
| prEN ISO 9229-1997 |
绝热术语定义 |
Thermal insulation - Definition of terms (ISO/DIS 9229:1997) |
| prEN ISO 9309-1996 |
制冷剂压缩机性能数据表示 |
Refrigerant compressors - Presentation of performance data (ISO/DIS 9309:1996) |
| prEN ISO 9311-1-1995 |
热塑性塑料管系统的粘合剂第1部分： |
Adhesives for thermoplastics piping systems - Part 1: Test methods for spreadability and film properties of adhesives (ISO/DIS 9311-1:1995) |
| prEN ISO 9311-3-2002 |
热塑性塑料管系统的粘合剂第3部分：内压阻力测定的试验方法 |
Adhesives for thermoplastic piping systems - Part 3: Test method for the determination of resistance to internal pressure (ISO/DIS 9311-3:2002) |
| prEN ISO 9377-1-2000 |
水质烃油指数的测定第1部分：溶剂萃取法与重量测定法 |
Water quality - Determination of hydrocarbon oil index - Part 1: Method using solvent extraction and gravimetry (ISO/DIS 9377-1:2000) |
| prEN ISO 9377-4-1999 |
水质烃油指数的测定第4部分：溶剂萃取法与气相色谱分析法 |
Water quality - Determination of hydrocarbon oil index - Part 4: Method using solvent extraction and gas chromatography (ISO/DIS 9377-4:1999) |
| prEN ISO 9493-1996 |
产品几何量技术规范(GPS)尺寸测量仪器刻度盘式试验指示器(操纵型)设计和测量要求 |
Geometrical product specification (GPS) - Dimensional measuring instruments: Dial test indicators (lever type) - Design and metrological requirements (ISO/DIS 9493:1996) |
| prEN ISO 9692-1-2003 |
焊接和相关工艺接头制备的推荐工艺第1部分：钢的人工电弧焊、气体保护金属电弧焊、气焊和束焊 |
Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO/FDIS 9692-1:2003) |
| prEN ISO 9735-1-2000 |
用于行政、商业和运输业的电子数据交换(EDIFACT)应用级语法规则(语法版本号：4)第1部分：对所有部分共 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4) - Part 1: Syntax rules common to all parts, together with syntax service directories for each of the parts (ISO 9 |
| prEN ISO 9735-2-2000 |
用于行政、商业和运输业的电子数据交换(EDIFACT)应用级语法规则(语法版本号：4)第2部分：批式电子数据 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4) - Part 2: Syntax rules specific to batch EDI (ISO 9735-2:1998) |
| prEN ISO 9735-3-2000 |
用于行政、商业和运输业的电子数据交换(EDIFACT)应用级语法规则(语法版本号：4)第3部分：交互式电子数 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4) - Part 3: Syntax rules specific to interactive EDI (ISO 9735-3:1998) |
| prEN ISO 9735-4-2000 |
用于行政、商业和运输业的电子数据交换(EDIFACT)应用级语法规则(语法版本号：4)第4部分：批式电子数据 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4) - Part 4: Syntax and service report message for batch EDI (message type - CONTRL) (ISO 9735-4:1998) |
| prEN ISO 9735-5-2000 |
用于行政、商业和运输业的电子数据交换(EDIFACT)应用级语法规则(语法版本号：4)第5部分：批式电子数据 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (syntax version number: 4) - Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin) (ISO 9735-5:1999) |
| prEN ISO 9735-6-2000 |
用于行政、商业和运输业的电子数据交换(EDIFACT)应用级语法规则(语法版本号：4)第6部分：安全真实性与 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (syntax version number: 4) - Part 6: Secure authentication and acknowledgement message (message type-AUTACK) (ISO 9735-6:1999) |
| prEN ISO 9735-7-2000 |
用于行政、商业和运输业的电子数据交换(EDIFACT)应用级语法规则(语法版本号：4)第7部分：批式电子数据 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4) - Part 7: Security rules for batch EDI (confidentiality) (ISO 9735-7:1999) |
| prEN ISO 9735-8-2000 |
用于行政、商业和运输业的电子数据交换(EDIFACT)应用级语法规则(语法版本号：4)第8部分：电子数据交换 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4) - Part 8: Associated data in EDI (ISO 9735-8:1998) |
| prEN ISO 9735-9-2000 |
用于行政、商业和运输业的电子数据交换(EDIFACT)应用级语法规则(语法版本号：4)第9部分：安全密钥与证书 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4) - Part 9: Security key and certificate management message (message type-KEYMAN) (ISO 9735-9:1999) |
| prEN ISO 9856-2003 |
输送带弹性伸长和永久伸长的测定及弹性模量的计算 |
Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic moduls (ISO/FDIS 9856:2003) / Note: Intended as replacement for EN ISO 9856 (1995-10). |
| prEN ISO 9886-2002 |
人类工效学生理学测量评定热疲劳 |
Ergonomis - Evaluation of thermal strain by physiological measurements (ISO/DIS 9886:2002) |
| prEN ISO 9917-1-2003 |
牙科材料水基胶粘剂第1部分：粉末/液体酸碱胶粘剂 |
Dental materials - Water-based cements - Part 1: Powder/liquid acid-base cements (ISO/FDIS 9917-1:2003) |
| prEN ISO 9921-2003 |
人类工效学语音通讯的评价 |
Ergonomics - Assessment of speech communication (ISO/FDIS 9921-1:2003) |
| prEN ISO/IEC 10536-2-1996 |
识别卡无接触点集成电路卡第2部分：耦合区域的尺寸和位置 |
Identification cards - Contactless integrated circuit(s) cards - Part 2: Dimensions and location of coupling areas (ISO/IEC 10536-2:1995) |
| prEN ISO/IEC 10646-1-1996 |
信息技术通用多八位编码字符集(UCS)第1部分：体系结构和基本多文种平面 |
Information technology - Universal Multiple-Octet Coded Character Set (UCS) - Part 1: Architecture and basic multilingual plane (ISO/IEC 10646-1:1993) |
| prEN ISO/IEC 13818-1-2001 |
信息技术运动图像及其伴音信息的通用编码：系统 |
Information technology - Generic coding of moving pictures and associated audio information: Systems (ISO/IEC 13818:2000) |
| prEN ISO/IEC 13818-2-2001 |
信息技术运动图像及其伴音信息的通用编码第2部分：视频 |
Information technology - Generic coding of moving pictures and associated audio information - Part 2: Video (ISO/IEC 13818-2:2000) |
| prEN ISO/IEC 13818-3-1995 |
信息技术运动图像及其伴音信息的通用编码第3部分：声音 |
Information technology - Generic of coding pictures and associated audio information - Part 3: Audio (ISO/IEC 13818-3:1995) |
| prEN ISO/IEC 15423-1-2001 |
信息技术自动识别和数据收集技术条形码扫描器及解码器性能试验第1部分：线性符号 |
Information technology - Automatic identification and data capture techniques; Bar code scanner and decoder performance testing - Part 1: Linear symbols (ISO/IEC 15423-1:2001) |
| prEN ISO/IEC 15426-1-2001 |
信息技术自动识别和数据收集技术条形码校验一致性规范第1部分：线性符号 |
Information technology; Automatic identification and data capture techniques - Bar code verifier conformance specifications - Part 1: Linear symbols (ISO/IEC 15426-1:2000) |
| prEN ISO/IEC 16022-2000 |
信息技术国际符号表示规范数据矩阵 |
Information technology - International symbology specification - Data matrix (ISO/IEC 16022:2000) |
| prEN ISO/IEC 16023-2000 |
信息技术 国际符号表示规范 混合代码 |
Information technology - International symbology specification - MaxiCode (ISO/IEC 16023:2000) |
| prEN ISO/IEC 16390-2001 |
信息技术自动识别和数据捕获技术条形码符号表示法规范5与2交替 |
Information technology - Automatic identification and data capture techniques - Bar code symbology specifications; Interleaved 2 of 5 (ISO/IEC 16390:1999) |
| prEN ISO/IEC 17011-2002 |
提供评定和鉴定用产品的一般要求 |
General requirements for bodies providing assessment and accreditation of conformity assessment bodies (ISO/IEC DIS 17011:2002) |
| prEN ISO/IEC 18004-2000 |
信息技术自动识别与数据收集技术条码符号学QR码 |
Information technology - Automatic identification and data capture techniques - Bar code symbology; QR Code (ISO/IEC 18004:2000) |
| prEN ISO/IEC 7501-2-1996 |
识别卡机器可读旅行文件第2部分：机器可读签证 |
Identification cards - Machine readable travel documents - Part 2: Machine readable visa (ISO/IEC 7501-2:1995) |
| prEN ISO/IEC 7811-2-2001 |
识别卡记录技术第2部分：磁条低矫顽力 |
Identification cards - Recording technique - Part 2: Magnetic stripe; Low coercivity (ISO/IEC 7811-2:2001) |
| prEN ISO/IEC 7811-6-2001 |
识别卡记录技术第6部分：磁条高矫顽力 |
Identification cards - Recording technique - Part 6: Magnetic stripe; High coercivity (ISO/IEC 7811-6:2001) |
| prEN ISO/IEC 7812-1-2000 |
识别卡发行者标识第1部分：标准号系统 |
Identification cards - Identification of issuers - Part 1: Numbering system (ISO/IEC 7812-1:2000) |
| prEN ISO/IEC 7812-2-2000 |
识别卡发行者标识第2部分：申请和登记规程 |
Identification cards - Identification of issuers - Part 2: Application and registration procedures (ISO/IEC 7812-2:2000) |
| prEN ISO/IEC 7942-1-2000 |
信息技术计算机图形和图像处理图形核心系统第1部分：功能描述 |
Information technology - Computer graphics and image processing - Graphical Kernel System (GKS) - Part 1: Functional description (ISO/IEC 7942-1:1994) |
| prEN ISO/IEC 7942-2-2000 |
信息技术计算机图形和图像处理图形核心系统第2部分：NDC文件 |
Information technology - Computer graphics and image processing - Graphical Kernel System (GKS) - Part 2: NDC metafile (ISO/IEC 7942-2:1997) |
| prEN ISO/IEC 7942-3-2000 |
信息技术计算机图形和图像处理图形核心系统第3部分：审计跟踪 |
Information technology - Computer graphics and image processing - Graphical Kernel Systems (GKS) - Part 3: Audit trail (ISO/IEC 7942-3:1999) |
| prEN ISO/IEC 7942-4-2000 |
信息技术计算机图形和图像处理图形核心系统第4部分：图片部分存档 |
Information technology - Computer graphics and image processing - Graphical Kernel System (GKS) - Part 4: Picture part archive (ISO/IEC 7942-4:1998) |
| prENV ISO 14812-1999 |
运输信息及控制段的标准术语词汇 |
Glossary of standard terminologies for the transport information and control sector (ISO/DTR 14812:1999) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com