标准号 |
中文名称 |
英文名称 |
ISO 16998-2003 |
木质板材.耐湿测定.煮沸试验 |
(Wood-based panels - Determination of moisture resistance - Boil test) |
ISO 16998-2003 |
木质板材.耐湿测定.煮沸试验 |
|
ISO 16999-2003 |
木质板材.试样的抽取和剪切 |
(Wood-based panels - Sampling and cutting of test pieces) |
ISO 16999-2003 |
木质板材.试样的抽取和剪切 |
|
ISO 17-1973 |
优先数和优先数列的使用指南 |
Guide to the use of preferred numbers and of series of preferred numbers |
ISO 1700-1988 |
电影技术.8mmS型电影原片.剪切和穿孔尺寸 |
Cinematography; 8 mm type S motion-picture raw stock film; cutting and perforating dimensions |
ISO 1701 AMD 1-1992 |
升降工作台的卧式或立式铣床的试验条件.补充件1 |
Test conditions for milling machines with table of variable height, with horizontal or vertical spindle; testing of the accuracy; amendment 1 |
ISO 1701-0-1984 |
升降工作台的卧式或立式铣床的试验条件.第0部分:概述 |
Test conditions for milling machines with table of variable height, with horizontal or vertical spindle; Part 0 : General introduction |
ISO 1701-1-2004 |
立式和卧式升降台铣床检验条件.精度检验.第1部分:卧式机床 |
|
ISO 1701-2-1997 |
带升降工作台的铣床的试验条件.精度试验.第2部分:卧式机床 |
Test conditions for milling machines with table of variable height - Testing of accuracy - Part 2: Machines with horizontal spindle |
ISO 1701-2-2004 |
立式和卧式升降台铣床检验条件.精度检验.第2部分:立式机床 |
|
ISO 1701-3-1997 |
带升降工作台的铣床的试验条件.精度试验.第3部分:立式机床 |
Test conditions for milling machines with table of variable height - Testing of accuracy - Part 3: Machines with vertical spindle |
ISO 1703-1983 |
螺钉和螺母用装配工具.词汇.三种语言版 |
Assembly tools for screws and nuts; Nomenclature Trilingual edition |
ISO 1704-1991 |
造船.日字环节锚链 |
Shipbuilding; stud-link anchor chains |
ISO 17057-1999 |
航空航天.实心铆钉.试验方法 |
Aerospace - Rivets, solid - Test method |
ISO 17058-2004 |
钢铁.砷含量的测定.分光光度法 |
|
ISO 17063-2003 |
土方机械.步行操纵机器的制动系统.性能要求和试验步骤 |
|
ISO 17064-2004 |
木基板材.纤维板、碎料板和定向绞合板(OSB).词汇 |
|
ISO 17078-1-2004 |
石油和天然气工业.钻井和生产设备.第1部分:偏心轴 |
|
ISO 1708-1989 |
一般用途卧式车床的验收条件.精度试验 |
Acceptance conditions for general purpose parallel lathes; testing of the accuracy |
ISO 17081-2004 |
氢渗透的测量方法和用电化学法测定金属中的氢吸收和迁移 |
|
ISO 17082-2004 |
气压传动.阀.供货商文献中的数据 |
|
ISO 1709-1995 |
核能.裂变材料.运输和加工的临界安全原则 |
Nuclear energy - Fissile materials - Principles of criticality safety in storing, handling and processing |
ISO 171-1980 |
塑料.模塑材料体积系数的测定 |
Plastics; Determination of bulk factor of moulding materials |
ISO 17101-2004 |
农业机械.旋转和甩刀式割草机.投掷对象试验和验收标准 |
|
ISO 17103-2003 |
农用机械.旋转式和甩刀式割草机.防护围裙的试验方法和验收标准 |
(Agricultural machinery - Rotary and flail mowers - Test methods and acceptance criteria for protective skirts) |
ISO 17103-2003 |
农用机械.旋转式和甩刀式割草机.防护围裙的试验方法和验收标准 |
|
ISO 1711-1-1996 |
螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒扳手 |
Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets |
ISO 17121 Technical Corrigendum 1-2001 |
电影摄影术.用于胶片和图像产生的工作站.视觉和听觉条件要求.技术勘误1 |
Cinematography - Work stations used for film and video production - Requirements for visual and audio conditions; Technical Corrigendum 1 |
ISO 17121-2000 |
电影摄影术.胶片和视频生产的工作站.视频和声频条件要求 |
Cinematography - Work stations used for film and video production - Requirements for visual and audio conditions |
ISO 17123-1-2002 |
光学和光学仪器.测地与勘测仪器的野外测试程序.第1部分:理论 |
Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory |
ISO 17123-2-2001 |
光学和光学仪器.大地测量现场测量程序及测绘仪器.第2部分:水准仪 |
Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 2: Levels |
ISO 17123-3-2001 |
光学和光学仪器.大地测量现场测量程序及测绘仪器.第2部分:经纬仪 |
Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 3: Theodolites |
ISO 17123-4-2001 |
光学和光学仪器.大地测量现场测量程序及测绘仪器.第4部分:电光测距仪(EDM仪) |
Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM instruments) |
ISO 17123-6-2003 |
光学和光学仪器.大地测量和测绘仪器的现场试验规程.第6部分:旋转激光器 |
(Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers ) |
ISO 17123-6-2003 |
光学和光学仪器.大地测量和测绘仪器的现场试验规程.第6部分:旋转激光器 |
|
ISO 17155-2002 |
土质.用生物的呼吸曲线测定土壤微植物群的个体密度和活性 |
Soil quality - Determination of abundance and activity of soil microflora using respiration curves |
ISO 1716-2002 |
建筑产品耐火反应试验.燃烧热的测定 |
Reaction to fire tests for building products - Determination of the heat of combustion |
ISO 1717-1974 |
岩石钻孔.干钻用旋转式钻杆和钻头.连接尺寸 |
Rock drilling; Rotary drill-rods and rotary drill-bits for dry drilling; Connecting dimensions |
ISO 1718-1991 |
凿岩设备.冲击钻用的钻杆和可拆式钻头 |
Rock drilling equipment; drill rods with tapered connection for percussive drilling |
ISO 17186-2002 |
皮革.物理和机械试验.表面涂敷厚度的测定 |
Leather - Physical and mechanical tests - Determination of surface coating thickness |
ISO 17189-2003 |
黄油、食用油乳剂和可涂脂肪.脂肪含量的测定(参照法) |
|
ISO 17190-1-2001 |
尿失禁者用吸尿器材.使聚合物吸收材料特性化的试验方法.第1部分:PH值的测定 |
Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 1: Determination of pH |
ISO 17190-10-2001 |
尿失禁者用吸尿器材.使聚合物吸收材料特性化的试验方法.第10部分:用电位测量滴定法测定可提取聚合物含量 |
Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 10: Determination of extractable polymer content by potentiometric titration |
ISO 17190-11-2001 |
尿失禁者用吸尿器材.使聚合物吸收材料特性化的试验方法.第11部分:能呼吸的颗粒的含量的测定 |
Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 11: Determination of content of respirable particles |
ISO 17190-2-2001 |
尿失禁者用吸尿器材.使聚合物吸收材料特性化的试验方法.第2部分:残余单基物总量 |
Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 2: Determination of amount of residual monomers |
ISO 17190-3-2001 |
尿失禁者用吸尿器材.使聚合物吸收材料特性化的试验方法.第3部分:用筛分粒度级法测定粒度级分布 |
Urine absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 3: Determination of particle size distribution by sieve fractionation |
ISO 17190-4-2001 |
尿失禁者用吸尿器材.使聚合物吸收材料特性化的试验方法.第4部分:用加热后质量损耗法测定水含量 |
Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 4: Determination of moisture content by mass loss upon heating |
ISO 17190-5-2001 |
尿失禁者用吸尿器材.使聚合物吸收材料特性化的试验方法.第5部分:盐溶液的自由膨胀容量的重量分析测定法 |
Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 5: Gravimetric determination of free swell capacity in saline solution |
ISO 17190-6-2001 |
尿失禁者用吸尿器材.使聚合物吸收材料特性化的试验方法.第6部分:离心作用后盐溶液的液体保持容量的重量分析测定法 |
Urine-absorping aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation |
ISO 17190-7-2001 |
尿失禁者用吸尿器材.使聚合物吸收材料特性化的试验方法.第7部分:压力下吸收的重量分析测定法 |
Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 7: Gravimetric determination of absorption under pressure |
ISO 17190-8-2001 |
尿失禁者用吸尿器材.使聚合物吸收材料特性化的试验方法.第8部分:流速的量分析测定法 |
Urine-absorping aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 8: Gravimetric determination of flowrate |
ISO 17190-9 Technical Corrigendum 1-2002 |
尿失禁者用吸尿器材.表征聚合基吸收性材料的试验方法.第9部分:浓度的重量分析测定法.技术勘误1 |
Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 9: Gravimetric determination of density; Technical Corrigendum 1 |
ISO 17190-9-2001 |
尿失禁者用吸尿器材.使聚合物吸收材料特性化的试验方法.第9部分:浓度的量分析测定法 |
Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 9: Gravimetric determination of density |
ISO 17191-2004 |
不能自理人员用吸尿辅助装置.空气中可呼吸的聚丙烯酸酯超吸收材料的测量.用钠原子吸收光谱测定法测定收集盒中的粉尘 |
|
ISO 172-1978 |
塑料.酚-甲醛模塑.游离氨的检验 |
Plastics; Phenol-formaldehyde mouldings; Detection of free ammonia |
ISO 17202-2002 |
纺织品.单丝纱捻度的测定.无捻法和再加捻法 |
Textiles - Determination of twist in single spun yarns - Untwist/retwist method |
ISO 1721-1974 |
岩石钻孔.冲击式深孔钻用加长的钻杆设备.1 1/16-1/4英寸(27和32mm倒锯齿螺纹设备) |
Rock drilling; Extension drill-steel equipment for percussive long-hole drilling; Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm) |
ISO 17212-2004 |
结构胶粘剂.粘结前金属和塑料的表面准备指南 |
|
ISO 1722-1974 |
岩石钻孔.冲击式探孔钻探用加长的杆设备.1 1/2-2 1/2英寸(38-64mm)倒锯齿型螺丝设备 |
Rock drilling; Extension drill-steel equipment for percussive long-hole drilling; Reverse-buttress-threaded equipments 1 1/2 to 2 1/2 in (38 to 64 mm) |
ISO 17227-2002 |
皮革.物理和机械试验.皮革耐干热性的测定 |
Leather - Physical and mechanical tests - Determination of dry heat resistance of leather |
ISO 17229-2002 |
皮革.物理和机械试验.水蒸气吸收率的测定 |
Leather - Physical and mechanical tests - Determination of water vapour absorption |
ISO 17233-2002 |
皮革.物理和机械试验.表面涂层冷裂温度的测定 |
Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings |
ISO 17235-2002 |
皮革.物理和机械试验.软化度测定 |
Leather - Physical and mechanical tests - Determination of softness |
ISO 17236-2002 |
皮革.物理和机械试验.伸长度测定 |
Leather - Physical and mechanical tests - Determination of extension set |
ISO 17239-2004 |
水果、蔬菜及其产品.砷含量的测定.氢化原子吸收光谱法 |
|
ISO 1724-1997 |
道路车辆.12V电气系统的牵引车辆和挂车间的电气连接装置.12N(标准)型7极连接器 |
Road vehicles - Electrical connections between towing and towed vehicles with 12 V systems - 7 pole connector type 12 N (normal) |
ISO 1724-2003 |
道路车辆.牵引车和挂车之间电气连接用连接器.带12V标称电源电压的车辆用12N(标准)型7极连接器 |
(Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage ) |
ISO 1724-2003 |
道路车辆.牵引车和挂车之间电气连接用连接器.带12V标称电源电压的车辆用12N(标准)型7极连接器 |
|
ISO 17240-2004 |
水果和蔬菜制品.锡含量的测定.火焰原子吸收光谱法 |
|
ISO 1726-2000 |
道路车辆.拖拉机和半挂车之间的机械连接.互换性 |
Road vehicles - Mechanical coupling between tractors and semi-trailers - Interchangeability |
ISO 17266-2002 |
电影摄影.在35mm和70mm电影拷贝及底片上多频道模拟数字电影摄影声音和控制录音.位置和宽度尺寸 |
Cinematography - Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives - Position and width dimensions |
ISO 17269-2000 |
轿车轮胎.测量滚动圆周的方法.荷载新轮胎 |
Passenger car tyres - Methods for measuring rolling circumference - Loaded new tyres |
ISO 1728-1980 |
道路车辆.汽车和挂车之间的气压制动连接装置.互换性 |
Road vehicles; Pneumatic braking connections between motor vehicles and towed vehicles; Interchangeability |
ISO 17281-2002 |
塑料.在适度高负载速率(1 m/s)下断裂韧性(G和K)的测定 |
Plastics - Determination of fracture toughness (G and K) at moderately high loading rates (1 m/s) |
ISO 17282-2004 |
塑料.设计数据的获取和表示用指南 |
|
ISO 17287-2003 |
道路车辆.运输信息和控制系统的工效学.驾驶时适用性的评定规程 |
(Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving) |
ISO 17287-2003 |
道路车辆.运输信息和控制系统的工效学.驾驶时适用性的评定规程 |
|
ISO 17288-1-2002 |
乘用车.自由控制性能.第1部分:转向释放开环试验方法 |
Passenger cars - Free-steer behaviour - Part 1: Steering-release open-loop test method |
ISO 17288-2-2004 |
乘用车.无级变速性能.第2部分:转向脉冲开环试验方法 |
|
ISO 1729-1973 |
信息处理.无穿孔纸带规范 |
Information processing; Unpunched paper tape; Specification |
ISO 17292-2004 |
石油、石化和相关工业用金属球阀 |
|
ISO 17294-1-2004 |
水质.感应耦合等离子体质谱法(ICP-MS)的应用.第1部分:一般指南 |
|
ISO 17294-1-2004 |
水质.感应耦合等离子体质谱法(ICP-MS)的应用.第1部分:一般指南 |
|
ISO 17294-2-2003 |
水质.感应耦合等离子体质谱法(ICP-MS)的应用.第2部分:62种素的测定 |
(Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of 62 elements) |
ISO 17294-2-2003 |
水质.感应耦合等离子体质谱法(ICP-MS)的应用.第2部分:62种素的测定 |
|
ISO 1730-1980 |
口述记录设备.基本工作要求 |
Dictation equipment; Basic operating requirements |
ISO 17313-2004 |
土质.使用挠性壁渗透计测定饱和疏松材料的水渗透性 |
|
ISO 17331-2004 |
表面化学分析.从硅片工作基准材料表面采集素的化学方法及其全反射X射线荧光光谱法的测定 |
|
ISO 17332-2001 |
电影摄影.35MM移动摄影胶片上制造商印的识别信息.规范 |
Cinematography - Manufacturer-printed latent image identification information for 35 mm motion-picture colour-print film - Specifications |
ISO 17339-2002 |
船舶和海上技术.救生艇和救生船用海锚 |
Ships and marine technology - Sea anchors for survival craft and rescue boats |
ISO 1735-1987 |
乳酪及其制品.脂肪含量的测定.重量方析法(参照法) |
Cheese and processed cheese products; Determination of fat content; Gravimetric method (Reference method) |
ISO 1735-2004 |
干酪及融化干酪制品.脂肪含量的测定.重量分析法(参照法) |
|
ISO 1735-2004 |
干酪及融化干酪制品.脂肪含量的测定.重量分析法(参照法) |
|
ISO 17353-2004 |
水质.选择的有机化合物的测定.气体色谱法 |
|
ISO 17355-2003 |
航天数据和信息传送系统.CCSDS文档传送协议 |
Space data and information transfer systems - CCSDS file delivery protocol |
ISO 17355-2004 |
航天数据和信息传输系统.CCSDS文档传送协议 |
|
ISO 17357-2002 |
船舶和海上技术.高压浮式充气橡胶护舷材 |
Ships and marine technology - High-pressure floating pneumatic rubber fenders |
ISO 17359-2003 |
机器的条件监控和诊断.总导则 |
(Condition monitoring and diagnostics of machines - General guidelines) |
ISO 17359-2003 |
机器的条件监控和诊断.总导则 |
|
ISO 1736-2000 |
奶粉和奶粉制品.脂肪含量的测定.重量分析法(基准方法) |
Dried milk and dried milk products - Determination of fat content - Gravimetric method (Reference method) |
ISO 1737-1999 |
淡炼乳和甜炼乳.脂肪含量的测定.重量分析法(参照法) |
Evaporated milk and sweetened condensed milk - Determination of fat content - Gravimetric method (Reference method) |
ISO 1738-1997 |
黄油.盐含量的测定(参照法) |
Butter - Determination of salt content |
ISO 1738-2004 |
黄油.盐含量的测定 |
|
ISO 17380-2004 |
土质.易释放的氰化物和氰化物总含量的测定.连续流量分析法 |
|
ISO 17381-2003 |
水质.水质分析备用试验装备法的选择和应用 |
|
ISO 17386-2004 |
交通信息和控制系统.低速操作用机动辅助装置.性能要求和试验过程 |
|
ISO 17386-2004 |
交通信息和控制系统.低速操作用机动辅助装置.性能要求和试验过程 |
|
ISO 1739-1975 |
黄油.脂肪折射率的测定(参照法) |
Butter; Determination of the refractive index of the fat (Reference method) |
ISO 17398-2004 |
安全色和安全标志.安全标志的分类、性能和耐久性 |
|
ISO 17399-2003 |
空载系统.载人系统集成 |
(Space systems - Man-systems integration) |
ISO 17399-2003 |
空载系统.载人系统集成 |
|
ISO 1740-1991 |
奶脂制品和黄油.脂肪酸测定(参比法) |
Milk fat products and butter; determination of fat acidity (reference method) |
ISO 1740-2004 |
乳脂制品和奶油.脂肪酸度的测定(参照法) |
|
ISO 17401-2004 |
航天系统.运载工具用航天飞行器接口要求文献 |
|
ISO 1741-1980 |
葡萄糖.干燥后质量损失的测定.真空烘箱法 |
Dextrose; Determination of loss in mass on drying; Vacuum oven method |
ISO 17410-2001 |
食品和动物饲料的微生物学.psychrotrophic微生物计数的水平方法 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of psychrotrophic microorganisms |
ISO 1742-1980 |
葡萄糖浆.固体物质含量的测定.真空烘箱法 |
Glucose syrups; Determination of dry matter; Vacuum oven method |
ISO 17422-2002 |
塑料.环境方面.标准中环境方面的一般指南 |
Plastics - Environmental aspects - General guidelines for their inclusion in standards |
ISO 1743-1982 |
葡萄糖浆.固体物质含量的测定.折射率法 |
Glucose syrup; Determination of dry matter content; Refractive index method |