标准号 |
中文名称 |
英文名称 |
| ISO 15087-4-2000 |
牙科起子.第4部分:COUPLAND起子 |
Dental elevators - Part 4: Coupland elevators |
| ISO 15087-5-2000 |
牙科起子.第5部分:BEIN起子 |
Dental elevators - Part 5: Bein elevators |
| ISO 15087-6-2000 |
牙科起子.第6部分:FLOHR起子 |
Dental elevators - Part 6: Flohr elevators |
| ISO 15089-2000 |
水质.测定植物处理和杀虫剂用选择性的免疫测定导则 |
Water quality - Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents |
| ISO 1509-1973 |
飞机的一般用途推拉式三极断路器.性能要求 |
General purpose push-pull three-pole circuit-breakers for aircraft; Performance requirements |
| ISO 15098-1-1999 |
牙科镊子.第1部分:一般要求 |
Dental tweezers - Part 1: General requirements |
| ISO 15098-2-2000 |
牙科镊子.第2部分:Meriam型 |
Dental tweezers - Part 2: Meriam types |
| ISO 15098-3-2000 |
牙科镊子.第3部分:学院型 |
Dental tweezers - Part 3: College types |
| ISO 15099-2003 |
门、窗和遮蔽装置的热性能.详细计算 |
(Thermal performance of windows, doors and shading devices - Detailed calculations) |
| ISO 15099-2003 |
门、窗和遮蔽装置的热性能.详细计算 |
|
| ISO 15100-2000 |
塑料.增强纤维.短切原丝.松密度的测定 |
Plastics - Reinforcement fibres - Chopped strands; Determination of bulk density |
| ISO 15103-1-2000 |
塑料.聚亚苯基乙醚(PPE)模塑和挤制材料.第1部分:名称与符号系统和基本规范 |
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
| ISO 15103-2-2000 |
塑料.聚亚苯基乙醚(PPE)模塑和挤制材料.第2部分:试样制备和性能测定 |
Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| ISO 15105-1-2002 |
塑料.薄膜和薄板.气体传输率的测定.第1部分:压差法 |
Plastics; Film and sheeting - Determination of gas transmission rate - Part 1: Differential-pressure method |
| ISO 15105-2-2003 |
塑料.薄膜和薄板.气体传输率的测定.第2部分:等压法 |
Plastics - Film and sheeting - Determination of gas transmission rate - Part 2: Equal-pressure method |
| ISO 15105-2-2003 |
塑料.薄膜和薄板.气体传输率的测定.第2部分:等压法 |
|
| ISO 15106-1-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第1部分:湿度探测传感器法 |
Plastics; Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method |
| ISO 15106-1-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第1部分:湿度探测传感器法 |
|
| ISO 15106-1-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第1部分:湿度探测传感器法 |
|
| ISO 15106-1-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第1部分:湿度探测传感器法 |
|
| ISO 15106-2-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第2部分:红外探测传感器法 |
Plastics; Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method |
| ISO 15106-2-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第2部分:红外探测传感器法 |
|
| ISO 15106-2-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第2部分:红外探测传感器法 |
|
| ISO 15106-2-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第2部分:红外探测传感器法 |
|
| ISO 15106-3-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第3部分:电解探测传感器法 |
Plastics; Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method |
| ISO 15106-3-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第3部分:电解探测传感器法 |
|
| ISO 15106-3-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第3部分:电解探测传感器法 |
|
| ISO 15106-3-2003 |
塑料.薄膜和薄片.水蒸气传输率的测定.第3部分:电解探测传感器法 |
|
| ISO 15107-1998 |
胶粘剂.胶粘连接抗裂强度的测定 |
Adhesives - Determination of cleavage strength of bonded joints |
| ISO 15108-1998 |
胶粘剂.用弯曲剪切法测定胶粘连接处的强度 |
Adhesives - Determination of strength of bonded joints using a bending-shear method |
| ISO 15109-1998 |
胶粘剂.静负荷状态下胶粘连接处断裂时间的测定 |
Adhesives - Determination of the time to rupture of bonded joints under static load |
| ISO 15113 Technical Corrigendum 1-2001 |
橡胶.摩擦特性的测定.技术勘误1 |
Rubber - Determination of frictional properties; Technical Corrigendum 1 |
| ISO 15113-1999 |
橡胶.摩擦特性的测定 |
Rubber - Determination of frictional properties |
| ISO 15117-1-2004 |
煤流动性.第1部分:料斗抖动 |
|
| ISO 15119-2000 |
包装.袋.已填充袋摩擦系数的测定 |
Packaging - Sacks - Determination of the friction of filled sacks |
| ISO 1513 Technical Corrigendum 1-1994 |
色漆和清漆.试验样品的检验和制备.技术勘误1 |
Paints and varnishes; examination and preparation of samples for testing; technical corrigendum 1 |
| ISO 1513-1992 |
色漆和清漆.试验样品的检验和制备 |
Paints and varnishes; examination and preparation of samples for testing |
| ISO 15136-1-2001 |
石油和天然气工业的钻孔设备.人工升降梯的空腔泵系统.第1部分:泵 |
Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps |
| ISO 15138 Technical Corrigendum 1-2001 |
石油和天然气工业.近海生产装置.加热,通风和空调.技术勘误1 |
Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning; Technical Corrigendum 1 |
| ISO 15138-2000 |
石油和天然气工业.海上生产设备.加热、通风和空调设备 |
Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning |
| ISO 1514-1993 |
涂料和清漆.试验用标准样板 |
Paints and varnishes; standard panels for testing |
| ISO 1514-2004 |
色漆和清漆.试验用标准样板 |
|
| ISO 15141-1-1998 |
食品.谷类作物和谷类作物产品中赭曲霉素A的测定.第1部分:硅胶净化高效液体色谱法 |
Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 1: High performance liquid chromatographic method with silica gel clean up |
| ISO 15141-2-1998 |
食品.谷类作物和谷类作物产品中赭曲霉素A的测定.第2部分:重碳酸盐净化高效液体色谱法 |
Foodstuffs - Determination of ochratoxin A in cereals and cereal products - Part 2: High performance liquid chromatographic method with bicarbonate clean up |
| ISO 15142-1-2003 |
外科植入物.骨髓腔内插金属钉系统.第1部分:骨髓腔内插钉 |
(Implants for surgery - Metal intramedullary nailing systems - Part 1: Intramedullary nails) |
| ISO 15142-1-2003 |
外科植入物.骨髓腔内插金属钉系统.第1部分:骨髓腔内插钉 |
|
| ISO 15142-2-2003 |
外科植入物.骨髓腔内插金属钉系统.第2部分:锁紧部件 |
(Implants for surgery - Metal intramedullary nailing systems - Part 2: Locking components) |
| ISO 15142-2-2003 |
外科植入物.骨髓腔内插金属钉系统.第2部分:锁紧部件 |
|
| ISO 15142-3-2003 |
外科植入物.骨髓腔内插金属钉系统.第3部分:连接装置和扩孔钻直径测量 |
(Implants for surgery - Metal intramedullary nailing systems - Part 3: Connection devices and reamer diameter measurements) |
| ISO 15142-3-2003 |
外科植入物.骨髓腔内插金属钉系统.第3部分:连接装置和扩孔钻直径测量 |
|
| ISO 15147-1999 |
轻传输带.切割轻传输带的宽度和长度公差 |
Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts |
| ISO 15148-2002 |
建筑材料和产品的温湿性能.部分浸入法测定吸水系数 |
Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion |
| ISO 15152-2003 |
烟草.作为烟碱的总生物碱含量的测定.连续流分析法 |
(Tobacco - Determination of the content of total alkaloids as nicotine - Continuous-flow analysis method) |
| ISO 15152-2003 |
烟草.作为烟碱的总生物碱含量的测定.连续流分析法 |
|
| ISO 15153-2003 |
烟草.还原物质含量的测定.连续流分析法 |
(Tobacco - Determination of the content of reducing substances - Continuous-flow analysis method) |
| ISO 15153-2003 |
烟草.还原物质含量的测定.连续流分析法 |
|
| ISO 15154-2003 |
烟草.还原的碳水化合物含量的测定.连续流分析法 |
(Tobacco - Determination of the content of reducing carbohydrates - Continuous-flow analysis method) |
| ISO 15154-2003 |
烟草.还原的碳水化合物含量的测定.连续流分析法 |
|
| ISO 15156-1-2001 |
石油和天然气工业.在石油和天然气生产中用于含HS环境的材料.第1部分:耐裂材料选择的一般原则 |
Petroleum and natural gas industries - Materials for use in HS-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials |
| ISO 15156-2-2003 |
石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用 |
|
| ISO 15156-2-2003 |
石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第2部分:耐裂化碳和低合金钢及铸铁的使用 |
|
| ISO 15156-3-2003 |
石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金 |
|
| ISO 15156-3-2003 |
石油和天然气工业.油、气生产中含硫化氢(H2S)环境下使用的材料.第3部分:耐裂化CRAs(耐腐蚀合金)和其他合金 |
|
| ISO 1516-2002 |
闪点/无闪点测定.闭杯平衡法 |
Determination of flash/no flash - Closed cup equilibrium method |
| ISO 15161-2001 |
食品与饮料业用ISO 9001:2000应用导则 |
Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| ISO 15165-2001 |
精细陶瓷(高级陶瓷、高级工程陶瓷).分类系统 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Classification system |
| ISO 15166-1-1998 |
胶粘剂.大块样品的准备方法.第1部分:由两部分组成的系统 |
Adhesives - Methods of preparing bulk specimens - Part 1: Two-part systems |
| ISO 15166-2-2000 |
胶粘剂.大块样品的准备方法.第2部分:高温处理一部分系统 |
Adhesives - Methods for preparing bulk specimens - Part 2: Elevated-temperature-curing one-part systems |
| ISO 15167-1999 |
石油产品.中期蒸馏燃料的颗粒含量测定.实验室过滤法 |
Petroleum products - Determination of particulate content of middle distillate fuels - Laboratory filtration method |
| ISO 15169-2003 |
石油和液体石油产品.用混合油罐测量系统测定立式油罐所含烃类的体积、密度和质量 |
(Petroleum and liquid petroleum products - Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems) |
| ISO 15169-2003 |
石油和液体石油产品.用混合油罐测量系统测定立式油罐所含烃类的体积、密度和质量 |
|
| ISO 1517-1973 |
色漆和清漆.表面干燥试验.微球体法 |
Paints and varnishes; Surface-drying test; Ballotini method |
| ISO 15170-1-2001 |
道路车辆.带销和扭锁的四孔电连接器.第1部分:尺寸和应用类别 |
Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 1: Dimensions and classes of applications |
| ISO 15170-2-2001 |
道路车辆.带销和扭锁的四极点电连接器.第2部分:试验和要求 |
Road vehicles - Four-pole electrical connectors with pins and twist lock - Part 2: Tests and requirements |
| ISO 15171-1-1999 |
液压和一般用途的连接.诊断用途的液压耦合.压力下非连接耦合 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure |
| ISO 15171-2-2000 |
液压和一般用途的连接.诊断用液压联轴器.压力下连接用带M16 Pt2端头的联轴器 |
Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 ?2 end for connection under pressure |
| ISO 15174-2002 |
奶和奶制品.微生物凝结剂.测定牛奶全凝结块状活性 |
Milk and milk products - Microbial coagulants - Determination of total milk-clotting activity |
| ISO 15175-2004 |
土质.与地下水保护相关的土壤特性 |
|
| ISO 15176-2002 |
土壤质量.挖掘土壤和要求再利用的其他土壤物质特征 |
Soil quality - Characterization of excavated soil and other soil materials intended for re-use |
| ISO 15178-2000 |
土壤质量.干燃烧法测定总硫量 |
Soil quality - Determination of total sulfur by dry combustion |
| ISO 1518-1992 |
涂料和清漆.刮痕试验 |
Paints and varnishes; scratch test |
| ISO 15181-1-2000 |
涂料和清漆.测定防污漆中杀虫剂释放率.第1部分:杀虫剂萃取的一般方法 |
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides |
| ISO 15181-2-2000 |
涂料和清漆.测定防污漆中杀虫剂释放率.第2部分:萃取物中铜离子浓度的测定以及释放率的计算 |
Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate |
| ISO 15184-1998 |
涂料和清漆.使用铅笔试验测定薄膜硬度 |
Paints and varnishes - Determination of film hardness by pencil test |
| ISO 15186-1-2000 |
声学.用声强进行建筑物和建筑构件的隔声测量.第1部分:实验室测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements |
| ISO 15186-2-2003 |
声学.用声强测定建筑物和建筑构件的隔声性能.第2部分:现场测量 |
(Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements) |
| ISO 15186-2-2003 |
声学.用声强测定建筑物和建筑构件的隔声性能.第2部分:现场测量 |
|
| ISO 15186-3-2002 |
声学.用声强进行建筑物和建筑构件的隔声测量.第3部分:低频率实验室测量 |
Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3: Laboratory measurements at low frequencies |
| ISO 15187-2000 |
操纵工业机器人.机器人程序设计和操纵的图形使用者接口 |
Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R) |
| ISO 15188-2001 |
术语标准化项目管理指南 |
Project management guidelines for terminology standardization |
| ISO 15189-2003 |
医学实验室.质量和资格的特殊要求 |
Medical laboratories - Particular requirements for quality and competence |
| ISO 15189-2003 |
医学实验室.质量和资格的特殊要求 |
|
| ISO 15189-2003 |
医学实验室.质量和资格的特殊要求 |
|
| ISO 1519-2002 |
涂料和清漆.弯曲试验(圆心轴) |
Paints and varnishes - Bend test (cylindrical mandrel) |
| ISO 15190-2003 |
医学实验室.安全要求 |
(Medical laboratories - Requirements for safety) |
| ISO 15190-2003 |
医学实验室.安全要求 |
|
| ISO 15193-2002 |
实验室条件下医用诊断装置.生物原始试样中数量值的测量.参考测量法的说明 |
In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures |
| ISO 15194-2002 |
实验室条件下医用诊断装置.生物原始试样中数量值的测量.标准物质的描述 |
In vitro diagnostic systems - Measurement of quantities in samples of biological origin - Description of reference materials |
| ISO 15195-2003 |
实验室医学.标准测量实验室的要求 |
(Laboratory medicine - Requirements for reference measurement laboratories) |
| ISO 15195-2003 |
实验室医学.标准测量实验室的要求 |
|
| ISO 15197-2003 |
体外诊断试验系统.糖尿病症管理中自测用血糖监测系统的要求 |
(In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus) |
| ISO 15197-2003 |
体外诊断试验系统.糖尿病症管理中自测用血糖监测系统的要求 |
|
| ISO 15198-2004 |
临床实验室药物.体外诊断医疗设备.由制造商证实的用户质量控制程序 |
|
| ISO 1520-1999 |
涂料和清漆.杯突试验 |
Paints and varnishes - Cupping test |
| ISO 15202-1-2000 |
工作场所空气. 用等离子体原子发射光谱法对气载颗粒物质中金属和非金属的测定.第1部分:取样 |
Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling |
| ISO 15202-2-2001 |
工作场所空气. 用等离子体原子发射光谱法对气载颗粒物质中金属和非金属的测定.第2部分:样品制备 |
Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation |
| ISO 15202-3-2004 |
车间空气.感应耦合等离子体原子发射光谱法对气载颗粒物中金属及类金属的测定.第3部分:分析 |
|
| ISO 15212-1-1998 |
摆动式密度计.第1部分:实验室仪器 |
Oscillation-type density meters - Part 1: Laboratory instruments |
| ISO 15212-2-2002 |
振荡式密度计.第2部分:均质液体用过程测量仪器 |
Oscillation-type density meters - Part 2: Process instruments for homogeneous liquids |
| ISO 15213-2003 |
食品和动物饲料的微生物学.在厌氧条件下亚硫酸还原菌生长计数的水平法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions) |
| ISO 15213-2003 |
食品和动物饲料的微生物学.在厌氧条件下亚硫酸还原菌生长计数的水平法 |
|
| ISO 15214-1998 |
食品和动物饲料的微生物学.适温性乳酸菌的水平计数法.30℃菌落计数技术 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of mesophilic lactic acid bacteria - Colony-count technique at 30 鳦 |
| ISO 15217-2000 |
液压传动系统和件.带接地端的16mm电气连接器.特性和要求 |
Fluid power systems and components - 16 mm square electrical connector with earth contact - Characteristics and requirements |
| ISO 15218-2003 |
气压传动.3/2电磁阀.安装接口表面 |
(Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces) |
| ISO 15218-2003 |
气压传动.3/2电磁阀.安装接口表面 |
|
| ISO 15219-2004 |
土方机械.塔式缆索挖掘机.术语和商用规范 |
|
| ISO 1522 Technical Corrigendum 1-1998 |
涂料和清漆.摆杆阻尼试验.技术勘误1 |
Paints and varnishes - Pendulum damping test; Technical Corrigendum 1 |
| ISO 1522-1998 |
涂料和清漆.摆杆阻尼试验 |
Paints and varnishes - Pendulum damping test |
| ISO 15223 AMD 1-2002 |
医疗装置.与医疗装置标签、加标签和提供的信息一起使用的符号.修改件1 |
Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied; Amendment 1 |
| ISO 15223 AMD 2-2004 |
医疗器械.用于医疗器械标签、作标记和提供信息的符号.修改件2 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com