标准号 |
中文名称 |
英文名称 |
| ISO 3274 Technical Corrigendum 1-1998 |
几何产品规范(GPS).表面结构:外形方法.接触式尖笔记录仪的额定特性.技术勘误1 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments; Technical Corrigendum 1) |
| ISO 3274-1996 |
几何产品规范(GPS).表面特征:轮廓法.接触尖笔式记录仪的一般特性 |
(Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments) |
| ISO 3275-1974 |
信息处理.数据交换用3.81mm盒式磁带的7位编码字符集及其7位和8位扩大字符集的执行过程 |
(Information processing; Implementation of the 7- bit coded character set and its 7- bit and 8- bit extensions on 3,81 mm magnetic cassette for data interchange) |
| ISO 3282-1976 |
飞机.单孔道和三孔道装配(3类)的拉杆操纵的手控开关的尺寸 |
(Aircraft; Dimensions for single-hole and triple-hole mounting (Class 3) lever-operated manual switches) |
| ISO 3284-1974 |
松散物料的连续机械装卸设备.用于风送式装卸的弯头尺寸 |
(Continuous mechanical handling equipment for loose bulk materials; Dimensions of bends for use in pneumatic handling) |
| ISO 3285-1986 |
道路车辆.点火线圈安装架 |
(Road vehicles; Ignition coil mounting brackets) |
| ISO 3286-1976 |
单刃切削刀具.圆角半径 |
(Single point cutting tools; corner radii) |
| ISO 3287-1999 |
机动工业货车.操作员控制符号和其它显示器 |
(Powered industrial trucks - Symbols for operator controls and other displays) |
| ISO 3290-2001 |
滚动轴承.滚珠.尺寸和公差 |
(Rolling bearings - Balls - Dimensions and tolerances) |
| ISO 3291-1995 |
加长的莫氏锥柄麻花钻 |
(Extra-long morse taper shank twist drills) |
| ISO 3292-1995 |
加长的直柄麻花钻 |
(Extra-long parallel shank twist drills) |
| ISO 3293-1975 |
60°,90°和 120°角的莫氏锥柄尖底锪钻 |
(Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive) |
| ISO 3294-1975 |
60°,90°和 120°角的尖底锪钻 |
(Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive) |
| ISO 3295-1975 |
木工用窄带锯条.尺寸 |
(Narrow bandsaw blades for woodworking; dimensions) |
| ISO 3297-1998 |
信息和文献工作.国际标准连续出版物标准号(ISSN) |
(Information and documentation - International Standard Serial Number (ISSN)) |
| ISO 3298-1994 |
摄影.冲洗用化学品.冰醋酸规范 |
(Photography; processing chemicals; specifications for glacial acetic acid) |
| ISO 3299-1994 |
摄影学.照相用化学药液.1-苯基-3-吡啶烷酮规范 |
(Photography - Processing chemicals - Specifications for 1-phenyl-3-pyrazolidinone) |
| ISO 3301-1975 |
数据的统计分析.对偶观测下的两种平均数比较 |
(Statistical interpretation of data; Comparison of two means in the case of paired observations) |
| ISO 3302 DAM 1-1991 |
橡胶.产品的尺寸公差.第1次修改 |
(Rubber; dimensional tolerances for use with products; amendment 1) |
| ISO 3302-1 AMD 1-2001 |
橡胶.产品公差.第1部分:尺寸公差.修改件1.分级系统 |
(Rubber - Tolerances for products - Part 1: Dimensional tolerances; Amendment 1: Classification system for flash) |
| ISO 3302-1-1996 |
橡胶.产品公差.第1部分:尺寸公差 |
(Rubber - Tolerances for products - Part 1: Dimensional tolerances) |
| ISO 3302-2-1998 |
橡胶.产品公差.第2部分:几何公差 |
(Rubber - Tolerances for products - Part 2: Geometrical tolerances) |
| ISO 3303-1990 |
橡胶或塑料涂覆织物.撕裂强度的测定 |
(Rubber- or plastics-coated fabrics; determination of bursting strength) |
| ISO 3304-1985 |
光端精密无缝钢管.交货技术条件 |
(Plain end seamless precision steel tubes; Technical conditions for delivery) |
| ISO 3305-1985 |
光端焊接精密钢管材.交货的技术条件 |
(Plain end welded precision steel tubes; Technical conditions for delivery) |
| ISO 3306-1985 |
焊接光端钢管和精密钢管.交货的技术条件 |
(Plain end as-welded and sized precision steel tubes; Technical conditions for delivery) |
| ISO 3308-2000 |
卷烟烟雾常规分析器.定义和标准条件 |
(Routine analytical cigarette-smoking machine - Definitions and standard conditions) |
| ISO 331-1983 |
煤.分析样品中水分的测定.直接重量分析法 |
(Coal; determination of moisture in the analysis sample; direct gravimetric method) |
| ISO 3310-1 Technical Corrigendum 1-2004 |
试验筛.技术要求和试验.第1部分:金属丝网布试验筛.技术勘误1 |
|
| ISO 3310-1-2000 |
试验筛.技术要求和试验.第1部分:金属丝网布的试验筛 |
(Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth) |
| ISO 3310-2-1999 |
试验筛.技术要求和试验.第2部分:穿孔金属板的试验筛 |
(Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate) |
| ISO 3310-3-1990 |
试验用筛.技术要求和试验.第3部分:电蚀孔板的试验筛 |
(Test sieves; technical requirements and testing; part 3: test sieves of electroformed sheets) |
| ISO 3312-1987 |
烧结金属材料和硬质合金.杨氏模量的测定 |
(Sintered metal materials and hardmetals; Determination of Young modulus) |
| ISO 3314-1975 |
键槽传动的有锥孔 [锥度至1:30(包括1:30)]的套型钻头 |
(Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive) |
| ISO 3315-1996 |
螺钉和螺母用装配工具.手动方头驱动套筒扳手的驱动部件.尺寸和试验 |
(Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches - Dimensions and tests) |
| ISO 3316-1996 |
螺钉和螺母用装配工具.手动方头驱动的套筒扳手的附件.尺寸和试验 |
(Assembly tools for screws and nuts - Attachments for hand-operated square drive socket wrenches - Dimensions and tests) |
| ISO 3317-1974 |
螺钉和螺母用装配工具.机动插头扳手的方块传动加长六角插头 |
(Assembly tools for screws and nuts; Square drive extension hexagon insert, for power socket wrenches) |
| ISO 3318-1990 |
螺钉和螺母用装配工具.双头开口扳手,双头套环扳手和组合扳手.扳手头部的最大宽度 |
(Assembly tools for screws and nuts; double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches; maximum widths of heads) |
| ISO 3320-1987 |
流体动力系统和件.油缸内径和活塞杆直径.米制系列 |
(Fluid power systems and components; Cylinder bores and piston rod diameters; Metric series) |
| ISO 3321-1975 |
流体动力系统和件.油缸内径和活塞杆直径.英制系列 |
(Fluid power systems and components; Cylinder bores and piston rod diameters; Inch series) |
| ISO 3322-1985 |
流体动力系统和件.油缸.公称压力 |
(Fluid power systems and components; Cylinders; Nominal pressures) |
| ISO 3323-1987 |
飞机.液压件.表明已验收的液流成分的标志 |
(Aircraft; Hydraulic components; Marking to indicate fluid for which component is approved) |
| ISO 3324-1-1997 |
飞机轮胎和轮辋.第1部分:规范 |
(Aircraft tyres and rims - Part 1: Specifications) |
| ISO 3324-2-1998 |
飞机轮胎和轮辋.第2部分:轮胎的试验方法 |
(Aircraft tyres and rims - Part 2: Test methods for tyres) |
| ISO 3325 AMD 1-2001 |
不包括硬质合金的烧结金属材料.横向断裂强度的测定.精确说明.修改件1 |
(Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Precision statement; Amendment 1) |
| ISO 3325-1996 |
不包括硬质合金的烧结金属材料.横向断裂强度的测定 |
(Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength) |
| ISO 3326-1975 |
硬质合金.矫顽磁性(磁化)的测定 |
(Hardmetals; Determination of (the magnetization) coercivity) |
| ISO 3327-1982 |
硬质合金.横向断裂强度的测定 |
(Hardmetals; Determination of transverse rupture strength) |
| ISO 3328-1975 |
工业用硝酸.硫酸盐含量的测定.还原和滴定法 |
(Nitric acid for industrial use; Determination of sulphate content; Method by reduction and titrimetry) |
| ISO 3329-1975 |
工业用硝酸铵.硫化物含量的测定.还原滴定法 |
(Ammonium nitrate for industrial use; Determination of content of sulphur compounds; Method by reduction and titrimetry) |
| ISO 333 Technical Corrigendum 1-1996 |
煤.氮的测定.半微米基尔达斯法.技术勘误1 |
(Coal - Determination of nitrogen - Semi-micro Kjeldahl method; Technical Corrigendum 1) |
| ISO 333-1996 |
煤.氮的测定.基耶达(Kjeldabl)半微量定氮法 |
(Coal - Determination of nitrogen - Semi-micro Kjeldahl method) |
| ISO 3330-1975 |
工业用硝酸铵.氨型氮含量的测定.蒸馏后滴定法 |
(Ammonium nitrate for industrial use; Determination of ammoniacal nitrogen content; Titrimetric method after distillation) |
| ISO 3331-1975 |
工业用硝酸铵.氮总含量的测定.蒸馏后滴定法 |
(Ammonium nitrate for industrial use; Determination of total nitrogen content; Titrimetric method after distillation) |
| ISO 3332-1975 |
工业用硫酸铵.氨型氮含量的测定.蒸馏后滴定法 |
(Ammonium sulphate for industrial use; Determination of ammoniacal nitrogen content; Titrimetric method after distillation) |
| ISO 3333-1975 |
工业用硫酸铵.铜含量的测定.二苄基二硫代氨基甲酸锌光度法 |
(Ammonium sulphate for industrial use; Determination of copper content; Zinc dibenzyldithiocarbamate photometric method) |
| ISO 3334-1989 |
缩微摄影技术.ISO第2号清晰度测试卡.制图和使用 |
(Micrographics; ISO resolution test chart No. 2; description and use) |
| ISO 3336-1993 |
牙科学.合成聚合物牙齿 |
(Dentistry; synthetic polymer teeth) |
| ISO 3337-2000 |
有螺孔的圆柱形柄和莫氏锥度柄T型槽铣刀 |
(T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole) |
| ISO 3338-1-1996 |
铣刀的圆柱状柄.第1部分:圆柱直柄的尺寸特性 |
(Cylindrical shanks for milling cutters - Part 1: Dimensional characteristics of plain cylindrical shanks) |
| ISO 3338-2-2000 |
铣刀的直柄.第2部分:圆柱直柄的尺寸特性 |
(Cylindrical shanks for milling cutters - Part 2: Dimensional characteristics of flatted cylindrical shanks) |
| ISO 3338-3-1996 |
铣刀的圆柱状柄.第3部分:螺纹柄的尺寸特性 |
(Cylindrical shanks for milling cutters - Part 3: Dimensional characteristics of threaded shanks) |
| ISO 3339-0-1986 |
农业和林业用拖拉机和机械.分类和术语.第0部分:分类系统和分类.双语版 |
(Tractors and machinery for agriculture and forestry; Classification and terminology; Part 0 : Classification system and classification Bilingual edition) |
| ISO 334-1992 |
固体矿物燃料.硫总含量的测定.埃斯卡(Eschka)法 |
(Solid mineral fuels; determination of total sulfur; Eschka method) |
| ISO 3340-1976 |
建筑用纤维板.砂含量的测定 |
(Fibre building boards; Determination of sand content) |
| ISO 3341-2000 |
纺织玻璃纤维.纱线.断裂力和断裂伸长的测定 |
(Textile glass - Yarns - Determination of breaking force and breaking elongation) |
| ISO 3342-1995 |
纺织玻璃纤维.织毯.断裂张力的测定 |
(Textile glass - Mats - Determination of tensile breaking force) |
| ISO 3343-1984 |
纺织玻璃纤维.纱线.捻度平衡指数的测定 |
(Textile glass; Yarns; Determination of twist balance index) |
| ISO 3344-1997 |
增强制品.水份含量的测定 |
(Reinforcement products - Determination of moisture content) |
| ISO 3345-1975 |
木材.平行于木纹的极限拉伸应力的测定 |
(Wood; Determination of ultimate tensile stress parallel to grain) |
| ISO 3346-1975 |
木材.垂直于木纹的极限拉伸应力的测定 |
(Wood; Determination of ultimate tensile stress perpendicular to grain) |
| ISO 3347-1976 |
木材.平行于木纹极限剪切应力的测定 |
(Wood; Determination of ultimate shearing stress parallel to grain) |
| ISO 3348-1975 |
木材.冲击弯曲强度的测定 |
(Wood; Determination of impact bending strength) |
| ISO 3349-1975 |
木材.静态弯曲的弹性模量的测定 |
(Wood; Determination of modulus of elasticity in static bending) |
| ISO 335-1974 |
硬煤.粘结力的测定.罗加(Roga)试验 |
(Hard coal; determination of caking power; roga test) |
| ISO 3350-1975 |
木材.静态硬度的测定 |
(Wood; Determination of static hardness) |
| ISO 3351-1975 |
木材.抗冲击压痕的测定 |
(Wood; Determination of resistance to impact indentation) |
| ISO 3353-1-2002 |
航空航天.引导和收尾螺纹.第1部分:滚压外螺纹 |
(Aerospace - Lead and runout threads - Part 1: Rolled external threads) |
| ISO 3353-2-2002 |
航空航天.引导和收尾螺纹.第2部分:内螺纹 |
(Aerospace - Lead and runout threads - Part 2: Internal threads) |
| ISO 3354-1988 |
封闭管道中清洁水的流量测量.在满管和固定流量条件下使用测速仪的速度截面法 |
(Measurement of clean water flow in closed conduits; velocity-area method using current-meters in full conduits and under regular flow conditions) |
| ISO 3355-1975 |
鞋号.长度分等制(蒙多波因特系统中) |
(Shoe sizes; System of length grading (for use in the Mondopoint system)) |
| ISO 3356-1975 |
牛奶和奶粉、酪乳和酪乳粉、乳清和乳清粉.磷酸酶活性的测定(参照法) |
(Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder; Determination of phosphatase activity (Reference method)) |
| ISO 3357-1975 |
工业用三聚磷酸钠和焦磷酸钠.氧化磷(v)总含量的测定.磷钼酸喹啉重量法 |
(Sodium tripolyphosphate and sodium pyrophosphate for industrial use; Determination of total phosphorus(V) oxide content; Quinoline phosphomolybdate gravimetric method) |
| ISO 3358-1979 |
工业用三聚磷酸钠和焦磷酸钠.各种形式磷酸盐的柱色谱分离和测定 |
(Sodium tripolyphosphate and sodium pyrophosphate for industrial use; Separation by column chromatography and determination of the different phosphate forms) |
| ISO 3359-1975 |
工业用磷酸.砷含量的测定.二乙基二硫代氨基甲酸银光度法 |
(Phosphoric acid for industrial use; Determination of arsenic content; Silver diethyldithiocarbamate photometric method) |
| ISO 3360-1976 |
工业(包括食品工业)用磷酸和磷酸钠.氟含量的测定.茜素配位酮和硝酸镧光度法 |
(Phosphoric acid and sodium phosphates for industrial use (including foodstuffs); Determination of fluorine content; Alizarin complexone and lanthanum nitrate photometric method) |
| ISO 3361-1975 |
工业用磷酸.可溶性二氧化硅含量的测定.还原硅钼酸盐分光光度法 |
(Phosphoric acid for industrial use; Determination of soluble silica content; Reduced molybdosilicate spectrophotometric method) |
| ISO 3362-1976 |
工业用氯苄基.试验方法 |
(Benzyl chloride for industrial use; Methods of test) |
| ISO 3363-1976 |
工业用氟氯代烃.酸度的测定.滴定法 |
(Fluorochlorinated hydrocarbons for industrial use; Determination of acidity; Titrimetric method) |
| ISO 3364-1997 |
有圆形固定孔和圆角的可转位硬质合金(碳化物)刀片.尺寸 |
(Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions) |
| ISO 3365-1985 |
无固定孔的可转位硬质合金(碳化物)刀片.尺寸 |
(Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole; Dimensions) |
| ISO 3366-1999 |
涂敷磨料.磨料辊筒. |
(Coated abrasives - Abrasive rolls) |
| ISO 3369-1975 |
不渗透性烧结金属材料和硬质合金.密度的测定 |
(Impermeable sintered metal materials and hardmetals; Determination of density) |
| ISO 337 Technical Corrigendum 1-1990 |
道路车辆.半挂车接轮的直径为50mm的连接销.基本尺寸和装配尺寸互换性尺寸.技术勘误表1 |
(Road vehicles; 50 semi-trailer fifth wheel coupling pin; basic and mounting/interchangeability dimensions; technical corrigendum 1) |
| ISO 337-1981 |
道路车辆.半挂车接轮的直径为50mm的连接销.基本尺寸和装配尺寸互换性尺寸 |
(Road vehicles; 50 semi-trailer fifth wheel coupling pin; Basic and mounting/ interchangeability dimensions) |
| ISO 3371-1975 |
机床结构的组合件.旋转工作台和旋转工作台的多边中心支座 |
(Modular units for machine tool construction; Rotary tables and multi-sided centre bases for rotary tables) |
| ISO 3372-1975 |
造船.内河船舶.蘑菇形通风头 |
(Shipbuilding; Inland vessels; Mushroom-type ventilator heads) |
| ISO 3374-2000 |
加筋产品.垫子和织物.单位面积质量的测定 |
(Reinforcement products - Mats and fabrics - Determination of mass per unit area) |
| ISO 3375-1975 |
纺织玻璃纤维.粗纱硬挺度的测定 |
(Textile glass; Determination of stiffness of rovings) |
| ISO 3376-2002 |
皮革.物理和机械试验.抗张拉强度和伸长率的测定 |
(Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension) |
| ISO 3377-1-2002 |
皮革.物理和机械试验.撕破力的测定.第1部分:单边撕裂 |
(Leather - Physical and mechanical tests; Determination of tear load - Part 1: Single edge tear) |
| ISO 3377-2-2002 |
皮革.物理和机械试验.撕破力的测定.第2部分:双边撕裂 |
(Leather - Physical and mechanical tests; Determination of tear load - Part 2: Double edge tear) |
| ISO 3378-2002 |
皮革.物理和机械试验.粒面抗裂强度和折裂指数的测定 |
(Leather - Physical and mechanical tests - Determination of resistance to grain cracking and grain crack index) |
| ISO 3379-1976 |
皮革.粒面扩胀和胀破强度的测定.钢球顶破强力试验 |
(Leather; Determination of distension and strength of grain; Ball burst test) |
| ISO 3380-2002 |
皮革.物理和机械试验.温度最高达100℃时收缩率的测定 |
(Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 鳦) |
| ISO 3381-1976 |
声学.有轨车辆内的噪音测量 |
(Acoustics; Measurement of noise inside railbound vehicles) |
| ISO 3382-1997 |
声学.根据其他声学参数测量厅堂混响时间 |
(Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters) |
| ISO 3383-1985 |
橡胶.为试验目的升温和降至常温以下的通则 |
(Rubber; General directions for achieving elevated or subnormal temperatures for test purposes) |
| ISO 3384 AMD 1-2001 |
硫化橡胶或热塑橡胶.在常温和高温压缩时应力松弛的测定.修改件1:精密度数据 |
(Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures; Amendment 1: Precision data) |
| ISO 3384-1999 |
热塑或硫化橡胶.在环境温度和高温压缩时应力松驰的测定 |
(Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures) |
| ISO 3385-1989 |
软质泡沫聚合材料.用定载冲击法测定疲劳 |
(Flexible cellular polymeric materials; determination of fatigue by constant-load pounding) |
| ISO 3386-1-1986 |
泡沫柔性聚合材料.压缩应力应变特性的测定.第1部分:低密度材料 |
(Polymeric materials, cellular flexible; Determination of stress-strain characteristics in compression; Part 1 : Low-density materials) |
| ISO 3386-2-1997 |
泡沫柔性聚合材料.压缩应力应变特性的测定.第2部分:高密度材料 |
(Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials) |
| ISO 3387 Technical Corrigendum 1-2000 |
橡胶.硬度测量法测定结晶效应.技术勘误1 |
(Rubber - Determination of crystallization effects by hardness measurements; Technical Corrigendum 1) |
| ISO 3387-1994 |
橡胶.硬度测量法测定结晶效应 |
(Rubber - Determination of crystallization effects by hardness measurements) |
| ISO 3389-1975 |
飞机.无线电频率的挠性同轴电缆.尺寸和电特性 |
(Aircraft; Radio frequency flexible coaxial cables; Dimensions and electrical characteristics) |
| ISO 3390-1976 |
金属铝生产用氧化铝.锰含量的测定.火焰原子吸收法 |
(Aluminium oxide primarily used for the production of aluminium; Determination of manganese content; Flame atomic absorption method) |
| ISO 3391-1976 |
天然和人造冰晶石.钙含量的测定.火焰原子吸收法 |
(Cryolite, natural and artificial; Determination of calcium content; Flame atomic absorption method) |
| ISO 3392-1976 |
工业用天然及人造冰晶石和氟化铝.水含量的测定.电测法 |
(Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of water content; Electrometric method) |
| ISO 3393-1976 |
工业用天然及人造冰晶石和氟化铝.水分含量的测定.重量法 |
(Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of moisture content; Gravimetric method) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com