标准号 |
中文名称 |
英文名称 |
| ISO 6060-1989 |
水质.化学氧需要量的测定 |
Water quality; determination of the chemical oxygen demand |
| ISO 6067-1985 |
造船和海上建筑物.救生艇绞车 |
Shipbuilding and marine structures; Winches for lifeboats |
| ISO 6068-1985 |
信息处理.仪表设备磁带(包括遥测技术系统)的记录特点.互换的必要条件 |
Information processing; Recording characteristics of instrumentation magnetic tape (including telemetry systems); Interchange requirements |
| ISO 607-1980 |
表面活性剂和洗涤剂.样品分割法 |
Surface active agents and detergents; Methods of sample division |
| ISO 6070-1981 |
振动发生器的辅助工作台.描述设备特性的方法 |
Auxiliary tables for vibration generators; Methods of describing equipment characteristics |
| ISO 6072-2002 |
液压传动.流体和标准合成橡胶材料间的兼容性 |
Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials |
| ISO 6073-1997 |
石油产品.用在液压动力系统石油液体的体积弹性模量的预测 |
Petroleum products - Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems |
| ISO 6078-1982 |
红茶.词汇.两种语言版 |
Black tea; Vocabulary Bilingual edition |
| ISO 6079-1990 |
固体速溶茶.规范 |
Instant tea in solid form; specification |
| ISO 609 Technical Corrigendum 1-1996 |
固体矿物燃料.碳和氢含量的测定.高温燃烧法.技术勘误1 |
Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method; Technical corrigendum 1 |
| ISO 609-1996 |
固体矿物燃料.碳和氢含量的测定.高温燃烧法 |
Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method |
| ISO 6091-1980 |
奶粉.可滴定酸度的测定(参照法) |
Dried milk; Determination of titratable acidity (Reference method) |
| ISO 6092-1980 |
奶粉.可滴定酸酸度的测定(常规法) |
Dried milk; Determination of titratable acidity (Routine method) |
| ISO 6093-1985 |
信息处理.信息交换字符串中的数值表示法 |
Information processing; Representation of numerical values in character strings for information interchange |
| ISO 6098-1984 |
信息处理.宽12.7mm(0.5in)的自装式磁带盒 |
Information processing; Self-loading cartridges for 12,7 mm (0.5 in) wide magnetic tape |
| ISO 6099-2001 |
液压驱动系统和件.液压缸.装配尺寸和装配类型的识别标志 |
Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types |
| ISO 61-1976 |
塑料.不能由专用漏斗注入的模压材料表观密度的测定 |
Plastics; Determination of apparent density of moulding material that cannot be poured from a specified funnel |
| ISO 610-1990 |
链式输送机和刨煤机用高强度钢链带(无接头无形连接) |
High-tensile steel chains (round link) for chain conveyors and coal ploughs |
| ISO 6101-1-1991 |
橡胶.用原子吸收光谱法测定金属含量.第1部分:锌含量的测定 |
Rubber; determination of metal content by atomic absorption spectrometry; part 1: determination of zinc content |
| ISO 6101-2-1997 |
橡胶.用原子吸收光谱法测定金属的含量.第2部分:铅含量的测定 |
Rubber - Determination of metal content by atomic absorption spectrometry - Part 2: Determination of lead content |
| ISO 6101-3-1997 |
橡胶.用原子吸收光谱法测定金属的含量.第3部分:铜含量的测定 |
Rubber - Determination of metal content by atomic absorption spectrometry - Part 3: Determination of copper content |
| ISO 6101-4-1997 |
橡胶.用原子吸收光谱法测定金属的含量.第3部分:锰含量的测定 |
Rubber - Determination of metal content by atomic absorption spectrometry - Part 4: Determination of manganese content |
| ISO 6101-5-1990 |
橡胶.用原子吸收光谱测定法测定金属含量.第5部分:铁含量测定 |
Rubber; determination of metal content by atomic absorption spectrometry; part 5: determination of iron content |
| ISO 6103-1999 |
粘合的磨料制品.验收试验可允许的磨轮不平衡 |
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Testing |
| ISO 6104-1979 |
磨料制品.金刚石或立方晶粒氮化硼砂轮和锯盘.概览,名称和牌号和多种语言专用术语 |
Abrasive products; Diamond or cubic boron nitride grinding wheels and saws; General survey, designation and multilingual nomenclature |
| ISO 6105-1-2004 |
超级研磨切割砂轮用坯件.第1部分:建筑物和土木工程用人工切割 |
|
| ISO 6105-1-2004 |
超级研磨切割砂轮用坯件.第1部分:建筑物和土木工程用人工切割 |
|
| ISO 6105-1988 |
磨料制品.砖石切割用弓锯.钢锯片尺寸 |
Abrasive products; segmented saws for machining of stone and masonry cutting; dimensions of steel blades |
| ISO 6105-2-2004 |
超级研磨切割砂轮用坯件.第2部分:建筑物和土木工程用手持式切割 |
|
| ISO 6105-2-2004 |
超级研磨切割砂轮用坯件.第2部分:建筑物和土木工程用手持式切割 |
|
| ISO 6106-1979 |
磨料制品.金刚石或立方晶粒氮化硼的粒度 |
Abrasive products; Grain sizes of diamond or cubic boron nitride |
| ISO 6107-1-1996 |
水质.词汇.第1部分 |
Water quality - Vocabulary - Part 1 |
| ISO 6107-1-2004 |
水质.词汇.第1部分 |
|
| ISO 6107-2-1997 |
水质.词汇.第2部分 |
Water quality - Vocabulary - Part 2 |
| ISO 6107-3 AMD 1-2001 |
水质.词汇.第3部分.修改件1 |
Waterquality - Vocabulary - Part 3; Amendment 1 |
| ISO 6107-3-1993 |
水质.词汇.第3部分 |
Water quality; vocabulary; part 3 |
| ISO 6107-4-1993 |
水质.词汇.第4部分 |
Water quality; vocabulary; part 4 |
| ISO 6107-5-1996 |
水质.词汇.第5部分 |
Water quality - Vocabulary - Part 5 |
| ISO 6107-5-2004 |
水质.词汇.第5部分 |
|
| ISO 6107-6-1996 |
水质.词汇.第6部分 |
Water quality - Vocabulary - Part 6 |
| ISO 6107-6-2004 |
水质.词汇.第6部分 |
|
| ISO 6107-7-1997 |
水质.词汇.第7部分 |
Water quality - Vocabulary - Part 7 |
| ISO 6107-8 AMD 1-2001 |
水质.词汇.第8部分.修改件1 |
Water quality - Vocabulary - Part 8; Amendment 1 |
| ISO 6107-8-1993 |
水质.词汇.第8部分 |
Water quality; vocabulary; part 8 |
| ISO 6107-9-1997 |
水质.词汇.第9部分:按字母排列的索引和主题索引 |
Water quality - Vocabulary - Part 9: Alphabetical list and subject index |
| ISO 6108-1978 |
键传动的等角套铣刀 |
Double equal angle cutters with plain bore and key drive |
| ISO 611-1994 |
道路车辆.机动车及其挂车的制动.词汇 |
Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary |
| ISO 611-2003 |
道路车辆.机动车及其挂车的制动.词汇 |
(Road vehicles - Braking of automative vehicles and their trailers - Vocabulary ) |
| ISO 611-2003 |
道路车辆.机动车及其挂车的制动.词汇 |
|
| ISO 6110-1992 |
塑料模压套鞋.具有耐化学腐蚀性的加聚氯乙烯衬或不加聚氯乙烯衬的工业用长统靴.规范 |
Moulded plastics footwear; lined or unlined poly(vinyl chloride) industrial boots with chemical resistance; specification |
| ISO 6111-1982 |
橡胶鞋靴.耐化学性的有衬里或无衬里的工业用橡胶长靴 |
Rubber footwear; Lined or unlined rubber industrial boots with chemical resistance |
| ISO 6112-1992 |
塑料模压套鞋.具有耐动植物脂肪油的加聚氯乙烯衬或不加聚氯乙烯衬的工业用长统靴.规范 |
Moulded plastics footwear; lined or unlined poly(vinyl chloride) industrial boots with general-purpose resistance to animal fats and vegetable oils; specification |
| ISO 6115-1988 |
造船.拖网绞车 |
Shipbuilding; trawl winches |
| ISO 6117-1980 |
道路车辆.使用非石油基液压制动液的鼓式轮闸液压缸的弹性保护罩(最大工作温度100℃) |
Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.) |
| ISO 6118-1980 |
道路车辆.使用非石油基液压制动驱动缸的弹性皮碗和密封圈(最大工作温度70℃) |
Road vehicles; Elastomeric cups and seals for hydraulic brake actuating cylinders using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.) |
| ISO 6119-1980 |
道路车辆.使用非石油基液压制动液的液压盘式制动液压缸的弹性密封垫(最大工作温度120℃) |
Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 612-1978 |
道路车辆.汽车和拖挂车的尺寸.术语和定义 |
Road vehicles; Dimensions of motor vehicles and towed vehicles; Terms and definitions |
| ISO 6121-1988 |
表面活性剂.工业用烷基磺酸盐.烷基单磺酸盐含量的测定(两相直接滴定法) |
Surface active agents; technical alkane sulfonates; determination of alkane monosulfonates content by direct two-phase titration |
| ISO 6122-1978 |
表面活性剂.工业用链烷磺酸盐.链烷磺酸盐总含量的测定 |
Surface active agents; Technical alkane sulphonates; Determination of total alkane sulphonates content |
| ISO 6123-1-1982 |
橡胶或塑料包覆的辊筒.规范.第1部分:硬度要术 |
Rubber or plastics covered rollers; Specifications; Part 1 : Requirements for hardness |
| ISO 6123-2-1988 |
橡胶或塑料涂覆辊子.规范.第2部分:表面特性 |
Rubber- or plastics-covered rollers; specifications; part 2: surface characteristics |
| ISO 6123-3-1985 |
橡胶或塑料涂覆辊子.规范.第3部分:尺寸公差 |
Rubber- or plastics-covered rollers; Specifications; Part 3 : Dimensional tolerances |
| ISO 6127-1981 |
铬矿石.磷含量的测定.还原钼磷酸盐的光度计法 |
Chromium ores; Determination of phosphorus content; Reduced molybdophosphate photometric method |
| ISO 6129-1981 |
铬矿石.分析试样中吸湿含量的测定.重量法 |
Chromium ores; Determination of hygroscopic moisture content in analytical samples; Gravimetric method |
| ISO 613-2000 |
船和造船技术.磁罗盘、罗盘座和方位读数装置.B级 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class B |
| ISO 6130-1985 |
铬矿石.铁的总含量的测定.还原后的滴定法 |
Chromium ores; Determination of total iron content; Titrimetric method after reduction |
| ISO 6133-1998 |
橡胶和塑料.测定撕裂强度和粘合强度时获得的多峰值曲线的分析 |
Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength |
| ISO 6134-1992 |
蒸汽用橡胶软管和软管组件.规范 |
Rubber hoses and hose assemblies for steam; specification |
| ISO 6138-1991 |
铝矿石.成分不均匀性的实验测定 |
Aluminium ores; experimental determination of the heterogeneity of constitution |
| ISO 6139-1993 |
铝矿石.分配器的均匀分配的实验室测定 |
Aluminium ores; experimental determination of the heterogeneity of distribution of a lot |
| ISO 614-1989 |
造船和海上建筑物.矩形窗和侧舷窗用钢化安全玻璃板.强度无损检验的冲压方法 |
Shipbuilding and marine structures; toughened safety glass panes for rectangular windows and side scuttles; punch method of non-destructive strength testing |
| ISO 6140-1991 |
铝矿石.试样制备 |
Aluminium ores; preparation of samples |
| ISO 6141-2000 |
气体分析.校准气体和混合气体合格证书要求 |
Gas analysis - Requirements for certificates for calibration gases and gas mixtures |
| ISO 6142-2001 |
气体分析.校正用混合气体的制备.称重法 |
Gas analysis - Preparation of calibration gas mixtures - Gravimetric method |
| ISO 6143-2001 |
气体分析.校准用混合气体成分的测定和检验用比较方法 |
Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures |
| ISO 6144-2003 |
气体分析.标定用混合气体的制备.静态容量法 |
Gas analysis - Preparation of calibration gas mixtures - Static volumetric method |
| ISO 6144-2003 |
气体分析.标定用混合气体的制备.静态容量法 |
|
| ISO 6144-2003 |
气体分析.标定用混合气体的制备.静态容量法 |
|
| ISO 6145-1-1986 |
气体分析.标定用混合气体的制备.动态容量法.第1部分:校正的方法 |
Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 1 : Methods of calibration |
| ISO 6145-1-2003 |
气体分析.动态容量法制备标定用混合气体.第1部分:校正方法 |
(Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration ) |
| ISO 6145-1-2003 |
气体分析.动态容量法制备标定用混合气体.第1部分:校正方法 |
|
| ISO 6145-10-2002 |
气体分析.用动态容积法标定气体混合物的准备.第10部分:渗透法 |
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method |
| ISO 6145-2-2001 |
气体分析.标定用混合气体的制备.动态容量法.第2部分:容量泵 |
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 2: Volumetric pumps |
| ISO 6145-4-1986 |
气体分析.标定用混合气体的制备.动态容量法.第4部分:连续注入法 |
Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 4 : Continuous injection method |
| ISO 6145-4-2004 |
气体分析.用动态容量法制备标定用混合气体.第4部分:持续喷射器注入法 |
|
| ISO 6145-5-2001 |
气体分析.动态容量法纸板校准用混合气体.第5部分:毛细管校正装置 |
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices |
| ISO 6145-6-1986 |
气体分析.标定用混合气体的制备.动态容量法.第6部分:声孔 |
Gas analysis; Preparation of calibration gas mixtures; Dynamic volumetric methods; Part 6 : Sonic orifices |
| ISO 6145-6-2003 |
气体分析.动态容量法制备校准用混合气体.第6部分:临界声孔 |
(Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices) |
| ISO 6145-6-2003 |
气体分析.动态容量法制备校准用混合气体.第6部分:临界声孔 |
|
| ISO 6145-7-2001 |
气体分析.动态容量法纸板校准用混合气体.第7部分:热物流控制器 |
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers |
| ISO 6145-9 Technical Corrigendum 1-2002 |
气体分析.用动态容积法标定气体混合物的制备.第9部分:饱和法.技术勘误 1 |
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method; Technical Corrigendum 1 |
| ISO 6145-9-2001 |
气体分析.标定用混合气体的制备.动态容量法.第9部分:饱和方法 |
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method |
| ISO 6147-1979 |
气体分析.标定用混合气体的制备.饱和法 |
Gas analysis; Preparation of calibration gas mixtures; Saturation method |
| ISO 6148-2001 |
摄影.缩微摄影胶片、片盘和卷轴.尺寸 |
Photography - Micrographic films, spools and cores - Dimensions |
| ISO 6149-1-1993 |
液压传动的连接和一般应用的连接.油口和具有ISO 261螺纹和O型环密封的螺柱端头.第1部分:载头壳体内具有O形环的油口 |
Connections for fluid power and general use; ports and stud ends with ISO 261 threads and O-ring sealing; part 1: ports with O-ring seal in truncated housing |
| ISO 6149-2-1993 |
液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第2部分:重载(S系列)螺柱端头.尺寸、设计、试验方法和要求 |
Connections for fluid power and general use; ports and stud ends with ISO 261 threads and O-ring sealing; part 2: heavy duty (S series) stud ends; dimensions, design, test methods and requirements |
| ISO 6149-3-1993 |
液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第3部分:轻载(L系列)螺柱端头.尺寸、设计、试验方法和要求 |
Connections for fluid power and general use; ports and stud ends with ISO 261 threads and O-ring sealing; part 3: light duty (L series) stud ends; dimensions, design, test methods and requirements |
| ISO 6150-1988 |
气压传动.最大工作压力为10巴,16巴和25巴(1MPa,1.6MPa和2.5MPa)圆形快速连接插塞尺寸;规范,应用指南和试验 |
Pneumatic fluid power; cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 MPa and 2,5 MPa); plug connecting dimensions, specifications, application guidelines and testing |
| ISO 6152-1982 |
与酒精比重计一同使用的温度计和酒精比重计 |
Thermometers for use with alcoholometers and alcohol hydrometers |
| ISO 6153-1989 |
铬矿石.小样取样 |
Chromium ores; increment sampling |
| ISO 6154-1989 |
铬矿石.样品的制备 |
Chromium ores; preparation of samples |
| ISO 6155-1998 |
机床.卧式轴六角自动车床和卧式单轴自动车床的试验条件.精度试验 |
Machine tools - Test conditions for horizontal spindle turret and single spindle automatic lathes - Testing of the accuracy |
| ISO 6156-1987 |
术语.词汇的词典编辑录制的磁带交换格式(MATER) |
Magnetic tape exchange format for terminological/ lexicographical records (MATER) |
| ISO 6157-1-1988 |
紧固件的表面不连续性.第1部分:一般要求的螺栓,螺钉,螺柱 |
Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements |
| ISO 6157-2-1995 |
紧固件的表面不连续性.第2部分:螺母 |
Fasteners - Surface discontinuities - Part 2: Nuts |
| ISO 6157-3-1988 |
紧固件.表面不连续性.第3部分:特殊要求的螺栓,螺钉,螺柱 |
Fasteners; surface discontinuities; part 3: bolts, screws and studs for special requirements |
| ISO 6158-1984 |
金属镀层.工程技术用铬电镀层 |
Metallic coatings; Electroplated coatings of chromium for engineering purposes |
| ISO 6158-1984 |
金属镀层.工程技术用铬电镀层 |
Metallic coatings; Electroplated coatings of chromium for engineering purposes |
| ISO 6158-2004 |
金属覆盖层.工程用铬电镀层 |
|
| ISO 616-1995 |
焦炭.粉碎系数的测定 |
Coke - Determination of shatter indices |
| ISO 6160-1979 |
程序设计语言.PL/1语言[美国国家标准化学会(ANSI)标准X3.53-1987承认] |
Programming languages; PL/I (Endorsement by ISO of ANSI standard X3.53-1976) |
| ISO 6161-1981 |
个人用目镜.防激光辐射的滤光镜和护目镜 |
Personal eye-protectors; Filters and eye-protectors against laser radiation |
| ISO 6162-1 Technical Corrigendum 1-2004 |
液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第1部分:3.5MPa至35MPa(35巴至350巴)压力下使用的DN 13至127的凸缘连接器.技术勘误1 |
|
| ISO 6162-1 Technical Corrigendum 1-2004 |
液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第1部分:3.5MPa至35MPa(35巴至350巴)压力下使用的DN 13至127的凸缘连接器.技术勘误1 |
|
| ISO 6162-1-2002 |
液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第1部分:压力为3.5MPa至35MPa(35巴至350巴)、DN 13-DN 127时使用的凸缘连接器 |
Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 6162-2-2002 |
液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘连接器.第2部分:压力为35MPa至40MPa(350巴至400巴) |
(Hydraulic fluid power - Flange connectors with split or one-piece flange champs and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51) |
| ISO 6164-1994 |
液压传动.压力为2.5MPa至40MPa(25巴至400巴)时使用的四头螺钉整体方形法兰连接件 |
(Hydraulic fluid power; four-srew, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)) |
| ISO 6165-2001 |
土方机械.基本类型.词汇 |
(Earth-moving machinery - Basic types - Vocabulary) |
| ISO 6166-2001 |
证券和有关金融手段.国际证券鉴别标志标准号系统(ISIN) |
(Securities and related financial instruments - International securities identification numbering system (ISIN)) |
| ISO 6168-1980 |
磨料制品.金刚石或立方晶粒氮化硼砂轮.尺寸 |
(Abrasive products; Diamond or cubic boron nitride grinding wheels; Dimensions) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com