标准号 |
中文名称 |
英文名称 |
EN ISO 4042-1999 |
紧固件电镀层 |
Fasteners - Electroplated coatings (ISO 4042:1999) |
EN ISO 4044-1998 |
皮革化学试验样品的制备 |
Leather - Preparation of chemical test samples (ISO 4044:1977) |
EN ISO 4045-1998 |
皮革pH值的测定 |
Leather - Determination of pH (ISO 4045:1977) |
EN ISO 4047-1998 |
皮革硫酸盐总灰分和硫酸盐水不溶物灰分的测定 |
Leather - Determination of sulphated total ash and sulphated water-insoluble ash (ISO 4047:1977) |
EN ISO 4048-1998 |
皮革二氯甲烷萃取物的测定 |
Leather - Determination of matter soluble in dichloromethane (ISO 4048:1977) |
EN ISO 4049-2000 |
牙科学聚合物基充填、修复及粘接材料 |
Dentistry - Polymer-based filling, restorative and luting materials (ISO 4049:2000) |
EN ISO 4063-2000 |
焊接和相关工艺工艺名称和参照代码 |
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998) |
EN ISO 4066-1999 |
建筑工程制图钢筋表 |
Construction drawings - Bar scheduling (ISO 4066:1994) |
EN ISO 407-2004 |
小型医用气瓶.针导轭式阀连接 |
|
EN ISO 4074-2002 |
天然橡胶避孕套要求与试验方法 |
Natural latex rubber condoms - Requirements and test methods (ISO 4074:2002) |
EN ISO 4090-2004 |
摄影.医用射线摄影磁带/屏幕/胶片和硬拷贝成像胶片.尺寸和规范 |
|
EN ISO 4119-1996 |
纸浆浆料浓度的测定 |
Pulps - Determination of stock concentration (ISO 4119:1995) |
EN ISO 4126-1-2004 |
过压保护安全设备.第1部分:安全阀 |
|
EN ISO 4126-2-2003 |
防过压的安全设备第2部分:防爆膜安全设备 |
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003) |
EN ISO 4126-4-2004 |
过压保护安全设备.第4部分:安全操作导阀 |
|
EN ISO 4126-5-2004 |
过压保护安全设备.第5部分:可控安全减压系统 |
|
EN ISO 4126-7-2004 |
过压保护安全设备.第7部分:通用数据 |
|
EN ISO 4135-2001 |
麻醉剂与呼吸设备词汇 |
Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001) |
EN ISO 4142-2002 |
实验室玻璃器皿试管 |
Laboratory glassware - Test tubes (ISO 4142:2002) |
EN ISO 4157-1-1998 |
建筑工程制图代号体系第1部分:建筑物和建筑物的组成部分 |
Construction drawings - Designation systems - Part 1: Buildings and parts of buildings (ISO 4157-1:1998) |
EN ISO 4157-2-1998 |
建筑工程制图代号体系第2部分:空间命名与标准号 |
Construction drawings - Designation systems - Part 2: Room names and numbers (ISO 4157-2:1998) |
EN ISO 4157-3-1998 |
建筑工程制图代号体系第3部分:空间的标识 |
Construction drawings - Designation systems - Part 3: Room identifiers (ISO 4157-3:1998) |
EN ISO 4165-2003 |
道路车辆 电连接器 双极连接器 |
Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001) |
EN ISO 4172-1996 |
技术制图建筑工程制图预制结构的安装图 |
Technical drawings - Construction drawings - Drawings for the assembly of prefabricated structures (ISO 4172:1991) |
EN ISO 4256-1998 |
液化石油气量规蒸气压的测定LPG法 |
Liquefied petroleum gases - Determination of gauge vapour pressure - LPG method (ISO 4256:1996) |
EN ISO 4257-2001 |
液化石油气采样方法 |
Liquefied petroleum gases - Method of sampling (ISO 4257:2001) |
EN ISO 4259-1995 |
石油产品试验方法精度数据的确定和应用 |
Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:1992/Cor 1:1993) |
EN ISO 4263-2-2003 |
石油和相关产品抗氧化油及液体老化性能的测定TOST试验第2部分:HFC级液压液试验程序 |
Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003) |
EN ISO 4264-1996 |
石油产品用四变量方程式计算中间馏份燃料十六烷指数 |
Petroleum products - Calculation of cetane index of middle-distillate fuels by the four-variable equation (ISO 4264:1995) |
EN ISO 4267-2-1995 |
石油与液化石油产品油量的计算第2部分:动态计量 |
Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement (ISO 4267-2:1988) |
EN ISO 4287-1998 |
产品几何量技术规范(GPS)表面结构:轮廓法表面结构的术语、定义及参数 |
Geometrical product specification (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997) |
EN ISO 4288-1997 |
产品几何量技术规范(GPS)表面结构:轮廓法评定表面结构的规则和方法 |
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
EN ISO 4320-1997 |
非离子表面活性剂浊点指数的测定容量法 |
Non-ionic surface active agents - Determination of cloud point index - Volumetric method (ISO 4320:1977, including Erratum:1980) |
EN ISO 4375-2004 |
水文测验.河流测量用索道系统 |
|
EN ISO 4404-2-2003 |
石油与相关产品阻燃液压油防腐蚀性的测定第3部分:无水液体 |
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2003) |
EN ISO 445-1998 |
搬运货物用平托盘术语 |
Pallets for materials handling - Vocabulary (ISO 445:1996) |
EN ISO 449-1999 |
船舶与海上技术 磁罗盘、罗经柜和方位读写装置A级 |
Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class A (ISO 449:1997) |
EN ISO 4490-2001 |
金属粉末用校准漏斗(霍尔流量计)测定流动时间 |
Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2001) |
EN ISO 4491-2-1999 |
金属粉末用还原法测定氧含量第2部分:还原时氢的质量的损失(氢损) |
Metallic powders - Determination of oxygen content by reduction methods - Part 2: Loss of mass on hydrogen reduction (hydrogen loss) (ISO 4491-2:1997) |
EN ISO 4516-2002 |
金属和其他无机覆盖层维氏和努氏显微硬度检验 |
Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
EN ISO 4518-1995 |
金属覆盖层厚度测量轮廓仪法 |
Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980) |
EN ISO 4524-3-1995 |
金属覆盖层金和金合金电镀层的试验方法第3部分:孔隙率的电图试验 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:1985) |
EN ISO 4524-6-1994 |
金属覆盖层金和金合金电镀层的试验方法第6部分:残留盐的测定 |
Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988) |
EN ISO 4526-2004 |
金属涂层.工程用镍电镀层 |
|
EN ISO 4527-2003 |
金属覆盖层自催化镍-磷合金电镀层规范和试验方法 |
Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003) |
EN ISO 4535-1998 |
釉瓷和搪瓷 耐洗涤纺织品用热洗涤剂溶液腐蚀性能测定 |
Vitreous and porcelain enamels - Apparatus for determination of resistance to hot detergent solutions used for washing textiles (ISO 4535:1983) |
EN ISO 4536-1995 |
金属基体上的金属和无机覆盖层盐水滴腐蚀试验(SD试验) |
Metallic and non-organic coatings on metallic substrates - Saline droplets corrosion test (SD test) (ISO 4536:1985) |
EN ISO 4538-1995 |
金属覆盖层硫代乙酰胺腐蚀试验(TAA试验) |
Metallic coatings - Thioacetamide corrosion test (TAA test) (ISO 4538:1978) |
EN ISO 4541-1994 |
金属和其他无机覆盖层腐蚀膏腐蚀试验(CORR试验) |
Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978) |
EN ISO 4543-1994 |
金属和其他无机覆盖层储存条件下腐蚀试验的一般规则 |
Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions (ISO 4543:1981) |
EN ISO 4577-1999 |
塑料聚丙烯和聚丙烯共聚物空气中氧化稳定性的测定烘箱法 |
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method (ISO 4577:1983) |
EN ISO 4583-1998 |
塑料环氧树脂和有关材料易皂化氯的测定 |
Plastics - Epoxy resins and related materials - Determination of easily saponifiable chlorine (ISO 4583:1998) |
EN ISO 4589-1-1999 |
塑料通过氧指数测定其燃烧性第1部分:指南 |
Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance (ISO 4589-1:1996) |
EN ISO 4589-2-1999 |
塑料通过氧指数测定其燃烧性第2部分:室温试验 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996) |
EN ISO 4589-3-1996 |
塑料通过氧指数测定其燃烧性第3部分:高温试验 |
Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996) |
EN ISO 4590-2003 |
硬质泡沫塑料材料开孔及闭孔体积百分数的测定 |
Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002) |
EN ISO 4597-1-1997 |
塑料环氧树脂用固化剂和促进剂第1部分:命名 |
Plastics - Hardeners and accelerators for epoxide resins - Part 1: Designation (ISO 4597-1:1983) |
EN ISO 4599-1996 |
塑料耐环境应力龟裂的测定变形片法 |
Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method (ISO 4599:1986) |
EN ISO 4600-1997 |
塑料耐环境应力龟裂的测定球或针压痕法 |
Plastics - Determination of environmental stress cracking (ESC) - Ball or pin impression method (ISO 4600:1992) |
EN ISO 4608-1998 |
塑料氯乙烯一般用途氯乙烯均聚物和共聚物树脂室温下增塑剂吸收的测定 |
Plastics - Vinylchlorid(VC)-homopolymere and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998) |
EN ISO 4610-2001 |
塑料氯乙烯均聚物和共聚物树脂用空气喷射筛滤器进行筛析 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001) |
EN ISO 4611-1999 |
塑料湿热水溅和盐雾效应的测定 |
Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:1987) |
EN ISO 4612-1999 |
塑料试验用聚氯乙烯糊料的制备齿轮传动混合方法 |
Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method (ISO 4612:1999) |
EN ISO 4613-1-1999 |
塑料乙酸乙烯/乙烯酯模塑和挤塑材料第1部分:命名和规范 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993) |
EN ISO 4613-2-1995 |
塑料乙酸乙烯/乙烯酯模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995) |
EN ISO 4613-2-2004 |
塑料.乙酸乙烯/乙烯酯(E/VAC)模塑和挤塑材料.第2部分:试验样品的制备和性能测定 |
|
EN ISO 4613-2/prA1-2001 |
塑料乙酸乙烯/乙烯酯模塑和挤塑材料第2部分:试样的制备和性能的测定修改1 |
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties; Amendment A1 (ISO 4613-2:1995/DAM 1:2001) |
EN ISO 4614-1999 |
塑料三聚氰胺-甲醛模塑件可萃取的甲醛的测定 |
Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977) |
EN ISO 4615-1999 |
塑料不饱和聚酯和环氧树脂总氯量的测定 |
Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979) |
EN ISO 4617-2000 |
色漆和清漆系列等效术语表 |
Paints and varnishes - List of equivalent terms (ISO 4617:2000) |
EN ISO 4618-2-1999 |
色漆和清漆涂覆材料的术语和定义第2部分:与涂料特性有关的特殊术语 |
Paints and varnishes - Terms and definitions for coating materials - Part 2: Special terms relating to paint characteristics and properties (ISO 4618-2:1999) |
EN ISO 4618-3-1999 |
色漆和清漆涂覆材料的术语和定义第3部分:表面制备和应用方法 |
Paints and varnishes - Terms and definitions for coating materials - Part 3: Surface preparation and methods of application (ISO 4618-3:1999) |
EN ISO 4622-1994 |
色漆和清漆堆积压力试验 |
Paints and varnishes - Pressure test for stackability (ISO 4622:1992) |
EN ISO 4623-1-2002 |
色漆和清漆耐丝状腐蚀的测定第1部分:钢基质 |
Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2000) |
EN ISO 4623-2-2004 |
涂料和清漆.耐丝状腐蚀性的测定.第2部分:铝衬底 |
|
EN ISO 4624-2003 |
色漆和清漆 粘附性的 撕开试验 |
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002) |
EN ISO 4628-1-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第1部分:一般介绍和命名系统 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2003) |
EN ISO 4628-10-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第10部分:线状腐蚀度的评定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree filiform corrosion (ISO 4628-10:2003) |
EN ISO 4628-2-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第2部分:起泡度的评定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2003) |
EN ISO 4628-3-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第3部分:防生锈度的评定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2003) |
EN ISO 4628-4-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第4部分:破裂度的评定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2003) |
EN ISO 4628-5-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第5部分:剥落度的评定 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2003) |
EN ISO 4628-6-2001 |
色漆和清漆漆膜降解的评定一般性缺陷程度、量值和大小的规定第6部分:粉化等级评定用胶带方法 |
Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 6: Rating of degree of chalking by tape method (ISO 4628-6:1990) |
EN ISO 4628-7-2003 |
色漆和清漆 涂层降解性的评定 表面缺陷数量和大小,和均匀变化强度的测定 第7部分:用绒化法做粉化程 |
Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2003) |
EN ISO 4629-1998 |
色漆和清漆用粘合剂羟值的测定滴定法 |
Binders for paints and varnishes - Determination of hydroxyl value - Titrimetric method (ISO 4629:1996) |
EN ISO 4638-1995 |
软质泡沫聚合材料气流透过率的测定 |
Polymeric materials, cellular flexible - Determination of air flow permeability (ISO 4638:1984) |
EN ISO 4651-1995 |
泡沫橡胶和塑料动态缓冲性能测定 |
Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988) |
EN ISO 4671-2000 |
橡胶和塑料软管和软管组件尺寸测量方法 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions (ISO 4671:1999) |
EN ISO 4672-1999 |
橡胶和塑料软管低温的弯曲试验 |
Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997) |
EN ISO 4674-1-2003 |
涂橡胶-或塑料的织物 抗撕裂力的测定 第1部分: 撕裂方法的 恒定速度 |
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2003) |
EN ISO 4674-2-1998 |
橡胶或塑料涂覆织物抗撕裂性测定第2部分:冲击摆法 |
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998) |
EN ISO 472-2001 |
塑料 词汇 |
Plastics - Vocabulary (ISO 472:1999) |
EN ISO 4753-1999 |
紧固件ISO米制外螺纹零件的末端 |
Fasteners - Ends of parts with external ISO metric screw thread (ISO 4753:1999) |
EN ISO 4757-1994 |
螺钉用十字槽 |
Cross recesses for screws (ISO 4757:1983) |
EN ISO 4759-1-2000 |
紧固件公差第1部分:螺栓、螺钉、螺柱和螺母产品等级A、B和C级 |
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; product grades A, B and C (ISO 4759-1:2000) |
EN ISO 4759-3-2000 |
紧固件公差第3部分:螺栓、螺钉和螺母用平垫圈产品等级A和C级 |
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C (ISO 4759-3:2000) |
EN ISO 4762-1997 |
内六角圆柱头螺钉 |
Hexagon socket head cap screws (ISO 4762:1997) |
EN ISO 4762-2004 |
内六角圆柱头螺钉 |
|
EN ISO 4796-1-2000 |
实验室玻璃器皿瓶第1部分:螺纹口瓶 |
Laboratory glassware - Bottles - Part 1: Screw-neck bottles (ISO 4796-1:2000) |
EN ISO 4796-2-2000 |
实验室玻璃器皿瓶第2部分:锥型口瓶 |
Laboratory glassware - Bottles - Part 2: Conical neck bottles (ISO 4796-2:2000) |
EN ISO 4796-3-2000 |
实验室玻璃器皿瓶第3部分:吸气瓶 |
Laboratory glassware - Bottles - Part 3: Aspirator bottles (ISO 4796-3:2000) |
EN ISO 4823-2000 |
牙科学弹性体印模材料 |
Dentistry - Elastomeric impression materials (ISO 4823:2000) |
EN ISO 483-1999 |
塑料水溶液在小密封器中恒定相对湿度值法 |
Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value (ISO 483:1988) |
EN ISO 4833-2003 |
食物与动物饲料的微生物学微生物计数的一般方法在摄氏30度时的菌落计数技术 |
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of microorganisms - Colony-count technique at 30 degrees C (ISO 4883:2003) |
EN ISO 4869-2-1995 |
声学护听器第2部分:佩带护听器时有效A-计权声压级的估算 |
Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994) |
EN ISO 4869-4-2000 |
声学护听器第4部分:与电平有关声音恢复耳罩的有效声压级的测量 |
Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998) |
EN ISO 4871-1996 |
声学机器和设备噪声辐射值的确定和检测 |
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
EN ISO 489-1999 |
塑料反射指数的测定 |
Plastics - Determination of refractive index (ISO 489:1999) |
EN ISO 4892-1-2000 |
塑料实验室光源暴露方法第1部分:通用指南 |
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:1999) |
EN ISO 4892-2-1999 |
塑料实验室光源暴露方法第2部分:氙弧灯 |
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources (ISO 4892-2:1994) |
EN ISO 4892-3-1999 |
塑料实验室光源暴露方法第3部分:UV荧光灯 |
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:1994) |
EN ISO 4894-1-1999 |
塑料苯乙烯/丙烯腈(SAN)模塑和挤塑材料第1部分:命名体系和基本规范 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 4894-1:1997) |
EN ISO 4894-2-1999 |
塑料苯乙烯/丙烯腈(SAN)模塑和挤塑材料第2部分:试样的制备和性能的测定 |
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995) |
EN ISO 4895-1999 |
塑料液态环氧树脂结晶性的测定 |
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:1997) |
EN ISO 4921-2001 |
针织品基本概念词汇 |
Knitting - Basic concepts - Vocabulary (ISO 4921:2000) |
EN ISO 4957-1999 |
工具钢 |
Tool steels (ISO 4957:1999) |
EN ISO 505-1999 |
传送带织物输送带抗撕裂强度的测定方法 |
Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:1999) |
EN ISO 5079-1995 |
纺织纤维单纤维断裂强力和伸长率的测定 |
Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres (ISO 5079:1979) |
EN ISO 5080-1999 |
剑麻农业用细绳 |
Sisal agricultural twines (ISO 5080:1994) |
EN ISO 5084-1996 |
纺织品纺织品和纺织制品厚度的测定 |
Textiles - Determination of thickness of textiles and textile products (ISO 5084:1996) |