标准号 |
中文名称 |
英文名称 |
| ISO 9528-1994 |
航空航天.标准重量聚四氟乙烯(PTFE)软管装置,21000KPa/204℃类.采购规范 |
(Aerospace - Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 C/21 000 kPa - Procurement specification) |
| ISO 9533-1989 |
土方机械.安装在机器上的前后可听到的报警信号.声音试验方法 |
(Earth-moving machinery; machine-mounted forward and reverse audible warning alarm; sound test method) |
| ISO 9534-1989 |
道路车辆.燃油泵的电联接 |
(Road vehicles; fuel pump electric connections) |
| ISO 9535-1989 |
木工机械.由板条制芯料产品的机器.术语 |
(Woodworking maschines; machines for production of core stock from laths; nomenclature) |
| ISO 9536-1989 |
木工机械.具有振动刀具的凿榫眼机 |
(Woodworking machines; mortising machines with oscillating tool action; nomenclature) |
| ISO 9537-1989 |
木工机械.单端边缘粘合机械.命名法 |
(Woodworking machines; single-end edge bonding machines; nomenclature) |
| ISO 9538-1996 |
航空航天.液压管接头及配件.平面弯曲试验 |
(Aerospace - Hydraulic tubing joints and fittings - Planar flexure test) |
| ISO 9539-1988 |
用于气焊、切割及有关加工过程设备的材料 |
(Materials for equipment used in gas welding, cutting and allied processes) |
| ISO 9542-1988 |
信息处理系统.系统间的通信和信息交换.与提供非连接式网络服务的协议一起使用的终端系统至中间系统指定路径 |
(Information processing systems; telecommunications and information exchange between systems; end system to intermediate system routeing exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO |
| ISO 9543-1989 |
信息处理系统.系统之间信息的互换.DTE/DCE接口的同步变换信号的质量 |
(Information processing systems; information exchange between systems; synchronous transmission signal quality at DTE/DCE interfaces) |
| ISO 9553-1997 |
太阳能.连接器用预制橡胶密封剂和密封结合物的试验方法 |
(Solar energy - Methods of testing preformed rubber seals and sealing compounds used in collectors) |
| ISO 9554-1991 |
纤维绳.总规范 |
(Fibre ropes; general specification) |
| ISO 9555-1-1994 |
明渠流量的测量.测量稳定流速用的示踪稀释法.第1部分:总则 |
(Measurement of liquid flow in open channels - Tracer dilution methods for the measurement of steady flow - Part 1: General) |
| ISO 9555-2-1992 |
明渠液体流量测量.测量稳定流速用的示踪稀释法.第2部分:放射示踪剂 |
(Measurement of liquid flow in open channels; tracer dilution methods for the measurement of steady flow; part 2: radioactive tracers) |
| ISO 9555-3-1992 |
明渠液体流量测量.测量稳定流速用的示踪稀释法.第3部分:化学示踪剂 |
(Measurement of liquid flow in open channels; tracer dilution methods for the measurement of steady flow; part 3: chemical tracers) |
| ISO 9555-4-1992 |
明渠液体流量测量.测量稳定流速用的示踪稀释法.第4部分:荧光示踪剂 |
(Measurement of liquid flow in open channels; tracer dilution methods for the measurement of steady flow; part 4: fluorescent tracers) |
| ISO 9556-1989 |
钢和铁.含碳总量的测定.感应电炉燃烧红外线吸收法 |
(Steel and iron; determination of total carbon content; infrared absorption method after combustion in an induction furnace) |
| ISO 9558-1989 |
木工机械.胶合板切片机.术语 |
(Woodworking machines; veneer slicing machines; nomenclature) |
| ISO 9559-1989 |
摄影技术.35mm幻灯片放映机.(放大)遮幅框 |
(Photography; 35 mm filmstrip projectors; specifications for frame masks) |
| ISO 9562-1998 |
水质.可吸附有机卤素(AOX)的测定 |
(Water quality - Determination of adsorbable organically bound halogens (AOX)) |
| ISO 9562-2004 |
水质.可吸附卤素(AOX)的测定 |
|
| ISO 9563-1990 |
皮带传动.抗静电同步环带的电导率.特性及试验方法 |
(Belt drives; electrical conductivity of antistatic endless synchronous belts; characteristics and test method) |
| ISO 9564-1-2002 |
银行业务.个人身份识别号(PIN)管理和保密.第1部分:ATM 和POS 系统联机处理的基本原则和要求 |
(Banking - Personal Identification Number (PIN) management and security - Part 1: Basic principles and requirements for online handling in ATM and POS systems) |
| ISO 9564-2-1991 |
银行业务.个人身份识别码管理和保密.第2部分:个人身份识别码(PIN)的加密技术或过程的审批程序 |
(Banking; Personal Identification Number management and security; part 2: approved algorithm(s) for PIN encipherment) |
| ISO 9564-3-2003 |
银行业务.个人识别代码的管理和安全.第3部分:在ATM和POS系统中的离线PIN操作的要求 |
(Banking - Personal Identification Number management and security - Part 3: Requirements for offline PIN handling in ATM and POS systems) |
| ISO 9564-3-2003 |
银行业务.个人识别代码的管理和安全.第3部分:在ATM和POS系统中的离线PIN操作的要求 |
|
| ISO 9565-1990 |
双轮机动脚踏车.侧立停放和直立停放的稳定性 |
(Two-wheeled motorcycles; parking stability of side- and centre-stands) |
| ISO 9566-1989 |
木工机械.单端多轴凿榫机.命名法 |
(Woodworking machines; Single-end tenoning machines with several spindles; nomenclature) |
| ISO 9567-1989 |
木工机械.四倍功效、木丝用卧式切削机.命名法 |
(Woodworking machines; horizontal shredding machines for wood wool production, quadruple effect; nomenclature) |
| ISO 9568-1993 |
电影技术.影院.审片室和配音室中的背景噪声级 |
(Cinematography; background acoustic noise levels in theatres, review rooms and dubbing rooms) |
| ISO 9583-1993 |
外科植入物.非破坏性试验.金属外科植入物的液体渗透检验 |
(Implants for surgery; non-destructive testing; liquid penetrant inspection of metallic surgical implants) |
| ISO 9584-1993 |
外科植入物.非破坏性试验.铸造金属外科植入物的X射线检查 |
(Implants for surgery; non-destructive testing; radiographic examination of cast metallic surgical implants) |
| ISO 9585-1990 |
外科植入物.骨板弯曲强度和刚度的测定 |
(Implants for surgery; determination of bending strength and stiffness of bone plates) |
| ISO 9587-1999 |
金属和其它无机覆层.减少氢脆风险的铁或钢的预处理 |
(Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement) |
| ISO 9588-1999 |
金属和其他无机涂层.为减轻氢脆危险的铁和钢的后包覆处理 |
(Metallic and other inorganic coatings - Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement) |
| ISO 9589-1994 |
建筑物自动扶梯的尺寸 |
(Escalators - Building dimensions) |
| ISO 959-1-1998 |
胡椒(胡椒科),胡椒粒和粉.规范.第1部分:黑胡椒 |
(Pepper (Piper nigrum L.), whole or ground - Specification - Part 1: Black pepper) |
| ISO 959-2-1998 |
胡椒(胡椒科),胡椒粒和粉.规范.第1部分:黑胡椒 |
(Pepper (Piper nigrum L.), whole or ground - Specification - Part 2: White pepper) |
| ISO 9591-1992 |
铝合金的耐腐蚀性.抗应力腐蚀裂纹的测定 |
(Corrosion of aluminium alloys; determination of resistance to stress corrosion cracking) |
| ISO 9591-2004 |
铝合金的腐蚀.抗应力腐蚀裂纹的测定 |
|
| ISO 9597-1989 |
水泥.试验方法.凝固时间及坚实度的测定 |
(Cements; test methods; determination of setting time and soundness) |
| ISO 9598-1989 |
受压力的无缝钢管.横向缺陷检验用全周边磁换能器铁涂氧磁管漏检验 |
(Seamless steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections) |
| ISO 9599-1991 |
铜、铅和硫化锌精矿.在分析样品中湿存水的测定.重量法 |
(Copper, lead and zinc sulfide concentrates; determination of hygroscopic moisture in the analysis sample; gravimetric method) |
| ISO 96-1-1992 |
纺织机械和附件.环绽纺纱和环绽捻线的钢领圈和钢丝圈.第1部分:T型钢领圈和相应钢丝圈 |
(Textile machinery and accessories; rings and travellers for ring spinning and ring doubling frames; part 1: T-rings and their appropriate travellers) |
| ISO 96-2-1992 |
纺织机械和附件.环绽纺纱和环绽捻线的钢领圈和钢丝圈.第2部分:HZCH型、HZ型和J型钢领圈和相应钢丝圈 |
(Textile machinery and accessories; rings and travellers for ring spinning and ring doubling frames; part 2: HZCH-, HZ- and J-rings and their appropriate travellers) |
| ISO 9606-1 AMD 1-1998 |
焊工的验收试验.熔焊.第1部分:钢.修改件1 |
(Approval testing of welders - Fusion welding - Part 1: Steels; Amendment 1) |
| ISO 9606-1-1994 |
焊工的验收试验.熔焊.第1部分:钢 |
(Approval testing of welders - Fusion welding - Part 1: Steels) |
| ISO 9606-2 AMD 1-1998 |
焊工的验收试验.熔焊.第2部分:铝和铝合金.修改件1 |
(Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys; Amendment 1) |
| ISO 9606-2-1994 |
焊工的验收试验.熔焊.第2部分:铝和铝合金 |
(Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys) |
| ISO 9606-3-1999 |
焊工的验收试验.熔焊.第3部分:铜和铜合金 |
(Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys) |
| ISO 9606-4-1999 |
焊工的验收试验.熔焊.第4部分:镍和镍合金 |
(Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys) |
| ISO 9606-5-2000 |
焊工的验收试验.熔焊.第5部分:钛和钛合金.锆和锆合金 |
(Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys) |
| ISO 9608-1994 |
V型皮带.皮带的均匀性.中心距离的变化的测定用试验方法 |
(V-belts - Uniformity of belts - Test method for determination of centre distance variation) |
| ISO 9609-1996 |
航空航天. 在大气压力为450 MPa(室温为120℃)时、在大气压力为450 MPa(室温为235℃)时、在大气压力为600 MP |
(室温为235(Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 C, 450 MPa (at ambient temperature)/235 C, 600 MPa (at ambient temperature)/425 C, 900 MPA (at ambie |
| ISO 9611-1996 |
声学.关于相关结构声辐射的结构噪声的声源特性记述.弹性联接时机械装置在接触点的声速测量 |
(Acoustics - Characterization of sources of structure-borne sound with respect to sound radiation from connected structures - Measurement of velocity at the contact points of machinery when resiliently mounted) |
| ISO 9612-1997 |
声学.暴露在工作场中的噪音的测量和评定导则 |
(Acoustics - Guidelines for the measurement and assessment of exposure to noise in a working environment) |
| ISO 9613-1-1993 |
声学.室外声传播衰减.第1部分:大气吸收声音的计算 |
(Acoustics; attenuation of sound during propagation outdoors; part 1: calculation of the absorption of sound by the atmosphere) |
| ISO 9613-2-1996 |
声学.室外声传播衰减.第2部分:计算的一般方法 |
(Acoustics - Attenuation of sound during propagation outdoors - Part 2: General method of calculation) |
| ISO 9614-1-1993 |
声学.利用声音强度测定噪声源功率级.第1部分:离散点测量 |
(Acoustics; determination of sound power levels of noise sources using sound intensity; part 1: measurement at discrete points) |
| ISO 9614-2-1996 |
声学.利用声音强度测定噪声源功率级.第2部分:扫描测量法 |
(Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning) |
| ISO 9614-3-2002 |
声学.利用声音强度测定噪声源功率级.第3部分:扫描测量精度法 |
(Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurements by scanning) |
| ISO 9615-1989 |
木工机械.带有液压夹紧装置的木丝用立式切碎机.命名法 |
(Woodworking machines; vertical shredding machines for wood wool production, with hydraulic clamping; nomenclature) |
| ISO 9616-1989 |
木工机械.建筑基地用圆锯机.命名法 |
(Woodworking machines; circular sawing machines for building sites; nomenclature) |
| ISO 9617-1989 |
木工机械.平行升降台和台架.命名法 |
(Woodworking machines; lifting tables and stages; nomenclature) |
| ISO 9618-1996 |
航空航天.带MJ螺纹的高度降低的标准十字形平头有槽(齿形)六角头螺母.级别:450MPa(室温下)/120℃、450MPa(室 |
((Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 C, 450 MPa (at ambient temperature)/235 C, 600 MPa (at ambient temperature)/425 C, 900 MPa (a |
| ISO 9619 AMD 1-2002 |
客车.挡风玻璃刮水系统.试验方法.修改件1 |
(Passenger cars - Windscreen wiping systems - Test methods; Amendment 1) |
| ISO 962-1974 |
信息处理.9 磁道宽12.7mm(0.5in)磁带7位编码字符集及其7位和8位扩大字符集的执行过程 |
(Information processing; Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape) |
| ISO 9622-1999 |
全脂牛奶.牛奶脂肪、蛋白质和乳糖含量的测定.中级红外设备操作指南 |
(Whole milk - Determination of milkfat, protein and lactose content - Guidance on the operation of mid-infrared instruments) |
| ISO 9623-1997 |
负压流体用聚乙烯(PE)/金属和聚丙烯(PP)/金属加减装置.螺纹的设计长度和尺寸.米制系列 |
(PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure - Design lengths and size of threads - Metric series) |
| ISO 9624-1997 |
负压流体用热塑性塑料管.法兰衔接器和可置换衬板法兰的适配尺寸 |
(Thermoplastics pipes for fluids under pressure - Mating dimensions of flange adapters and loose backing flanges) |
| ISO 9625-1993 |
溉灌用聚乙烯压力管机械连接配件 |
(Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes) |
| ISO 9626 AMD 1-2001 |
医疗装置生产用不锈钢针管.修改件1 |
(Stainless steel needle tubing for the manufacture of medical devices; Amendment 1) |
| ISO 9626-1991 |
医疗器件制造用不锈钢针状管材 |
(Stainless steel needle tubing for manufacture of medical devices) |
| ISO 9628-1992 |
滚动轴承.镶入轴承和偏心锁套圈 |
(Rolling bearings; insert bearings and eccentric locking collars) |
| ISO 9631-1991 |
橡胶密封件.最高温度为110℃的热水供给管道的密封环.材料规范 |
(Rubber seals; joint rings for hot water supply pipelines up to 110 鳦; specification for the material) |
| ISO 9631-2003 |
橡胶密封件.温度为110℃及以下的热水供给管道用密封圈.材料规范 |
|
| ISO 9633-2001 |
自行车链.特性和试验方法 |
(Cycle chains - Characteristics and test methods) |
| ISO 9642-1993 |
电影技术.每秒24.25和30画面电影摄制系统的时间和控制码规范 |
(Cinematography; time and control code for 24, 25 and 30 frames per second motion-picture systems; specifications) |
| ISO 9644 AMD 1-1998 |
农业灌溉设备.灌溉阀压力损失.试验方法.修改件1 |
(Agricultural irrigation equipment - Pressure losses in irrigation valves - Test method; Amendment 1) |
| ISO 9644-1993 |
农业灌溉设备.灌溉阀压力损失.试验方法 |
(Agricultural irrigation equipment; pressure losses in irrigation valves; test method) |
| ISO 9645-1990 |
声学.两轮式机动自行车行驶时发出噪声的测定.工程法 |
(Acoustics; measurement of noise emitted by two-wheeled mopeds in motion; engineering method) |
| ISO 9647-1989 |
钢和铁.钒含量的测定.火焰原子吸收光谱(分析)法 |
(Steel and iron; determination of vanadium content; flame atomic absorption spectrometric method) |
| ISO 9648-1988 |
高粱.鞣酸含量的测定 |
(Sorghum; determination of tannin content) |
| ISO 9649-1990 |
金属材料.金属丝.反复扭转试验 |
(Metallic materials; wire; reverse torsion test) |
| ISO 965-1-1998 |
一般用途米制螺纹.公差.第1部分:原则和基本数据 |
(ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data) |
| ISO 965-2-1998 |
一般用途米制螺纹.公差.第2部分:一般用途的内螺纹和外螺纹的尺寸限制.中等质量 |
(ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality) |
| ISO 965-3-1998 |
一般用途米制螺纹.公差.第2部分:结构螺纹的偏差 |
(ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads) |
| ISO 965-4-1998 |
一般用途米制螺纹.公差.第4部分:与由镀锌后公差位置为H或G攻出的内螺纹相匹配的热浸镀锌外螺纹的尺寸限制 |
(ISO general purpose metric screw threads - Tolerances - Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing) |
| ISO 965-5-1998 |
一般用途米制螺纹. 公差.第5部分:与镀锌前最大公差位置为H的热浸镀锌外螺纹相匹配的内螺纹的尺寸限制 |
(ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing) |
| ISO 9652-2-2000 |
砖石工程.第2部分:根据普通规则设计的未增强的砖石工程 |
(Masonry - Part 2: Unreinforced masonry design by simple rules) |
| ISO 9652-4-2000 |
砖石工程.第4部分:试验方法 |
(Masonry - Part 4: Test methods) |
| ISO 9652-5-2000 |
砖石工程.第5部分:词汇 |
(Masonry - Part 5: Vocabulary) |
| ISO 9653-1998 |
粘合剂.粘合剂粘结的剪切冲击强度试验方法 |
(Adhesives - Test method for shear impact strength of adhesive bonds) |
| ISO 9654-1989 |
电子工程用夹扭钳和剪切钳.单一用途钳.剪切钳 |
(Pliers and nippers for electronics; single-purpose nippers; cutting nippers) |
| ISO 9654-2004 |
电讯夹扭钳和剪切钳.专用钳.剪切钳 |
|
| ISO 9655-1989 |
电子工程用夹扭钳和剪切钳.专用夹扭钳.夹紧和控制用夹扭钳 |
(Pliers and nippers for electronics; single-purpose pliers; pliers for gripping and manipulating) |
| ISO 9655-2004 |
电讯夹扭钳和剪切钳.专用钳.夹扭钳 |
|
| ISO 9656-1989 |
电子工程用夹扭钳和剪切钳.试验方法 |
(Pliers and nippers for electronics - Test methods) |
| ISO 9656-2004 |
电讯夹扭钳和剪切钳.试验方法 |
|
| ISO 9657-1989 |
电子工程用夹扭钳和剪切钳.一般技术要求 |
(Pliers and nippers for electronics; general technical requirements) |
| ISO 9657-2004 |
电讯夹扭钳和剪切钳.通用技术条件 |
|
| ISO 9658-1990 |
钢.锆含量的测定.火焰原子吸收光谱法 |
(Steel; determination of aluminium content; flame atomic absorption spectrometric method) |
| ISO 9660-1988 |
信息处理.信息交换用CD-ROM的卷和文件结构 |
(Information processing; volume and file structure of CD-ROM for information interchange) |
| ISO 9662-1994 |
飞机设备.机上设备的环境和操作条件.湿度,温度和压力试验 |
(Aircraft equipment; environmental and operating conditions for airborne equipment; humidity, temperature and pressure tests) |
| ISO 9664-1993 |
粘合剂.拉伸剪切结构胶粘剂疲劳性能的试验方法 |
(Adhesives; test methods for fatigue properties of structural adhesives in tensile shear) |
| ISO 9665-1998 |
粘合剂.动物胶.取样和试验方法 |
(Adhesives - Animal glues - Methods of sampling and testing) |
| ISO 9667-1998 |
飞机地面供应设备.牵引杆 |
(Aircraft ground support equipment - Tow bars) |
| ISO 9668-1990 |
纸浆.镁含量的测定.火焰原子吸收光谱法 |
(Pulps; determination of magnesium content; flame atomic absorption spectrometric method) |
| ISO 9669 AMD 1-1992 |
货运集装箱系列1.罐式集装箱用界面连接.修改件1:3节和4节 |
(Series 1 freight containers; interface connections for tank containers; amendment 1: sections 3 and 4) |
| ISO 9669-1990 |
货运集装箱系列1.罐式集装箱用接合设备 |
(Series 1 freight containers; interface connections for tank containers) |
| ISO 9678-1991 |
飞机.自行式饮用水运送车 |
(Aircraft; self-propelled potable-water vehicle) |
| ISO 9680 Technical Corrigendum 1-1995 |
牙科工作灯.技术勘误表1 |
(Dental operating light; Technical Corrigendum 1) |
| ISO 9680-1993 |
牙科工作灯 |
(Dental operating light) |
| ISO 9681-1990 |
锰矿石和锰精矿.铁含量的测定.火焰原子吸收光谱测定法 |
(Manganese ores and concentrates; determination of iron content; flame atomic absorption spectrometric method) |
| ISO 9682-1-1991 |
铁矿石.锰含量的测定.第1部分:火焰原子吸收光谱法 |
(Iron ores; determination of manganes content; part 1: flame atomic absorption spectrometric method) |
| ISO 9683-1991 |
铁矿石.钒含量的测定.BPHA分光光度法 |
(Iron ores; determination of vanadium content; BPHA spectrophotometric method) |
| ISO 9684-1991 |
铁矿石.钒含量的测定.火焰原子吸收光谱法 |
(Iron ores; determination of vanadium content; flame atomic absorption spectrometric methods) |
| ISO 9685-1991 |
铁矿石.镍和/或铬含量的测定.火焰原子吸收光谱法 |
(Iron ores; determination of nickel and/or chronium contents; flame atomic absorption spectrometric method) |
| ISO 9686-1992 |
直接还原铁.碳和/或硫含量测定.具有红外测量的高频燃烧法 |
(Direct reduced iron; determination of carbon and/or sulfur content; high frequency combustion method with infrared measurement) |
| ISO 9687-1993 |
牙科设备.图形符号 |
(Dental equipment; graphical symbols) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com