标准号 |
中文名称 |
英文名称 |
| ISO 10304-3-1997 |
水质.用液态离子色谱法测定已溶解的阴离子.第3部分:铬酸盐、碘化物、亚硫酸盐、硫氰酸盐和硫代硫酸酯的测定 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate) |
| ISO 10304-4-1997 |
水质.液态离子色谱法对非溶解阴离子的测定.第4部分:低污染水中氯酸盐,氯化物,亚氯酸盐的测定 |
(Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination) |
| ISO 10306-1993 |
纺织品.棉纤维成熟度的空气流动法评定 |
(Textiles; cotton fibres; evaluation of maturity by the air flow method) |
| ISO 10307-1 Technical Corrigendum 1-1997 |
石油产品.残油中的总沉淀物.第1部分:热滤法测定.技术勘误表1 |
(Petroleum products - Total sediment in residual fuel oils - Part 1: Determination by hot filtration; Technical Corrigendum 1) |
| ISO 10307-1-1993 |
石油产品.残油中的总沉淀物.第1部分:热滤法测定 |
(Petroleum products; total sediment in residual fuel oils; part 1: determination by hot filtration) |
| ISO 10307-2-1993 |
石油产品.残油中的总沉淀物.第2部分:使用标准老化程序的测定 |
(Petroleum products; total sediment in residual fuel oils; part 2: determination using standard procedures for ageing) |
| ISO 10308-1995 |
金属覆层.孔隙率检验复审 |
(Metallic coatings - Review of porosty tests) |
| ISO 10309-1994 |
金属覆层孔隙率的检验.覆层孔隙率试剂的试验 |
(Metallic coatings - Porosity tests - Ferroxyl test) |
| ISO 1031-1974 |
针叶树锯材.缺陷.术语和定义.三种语言版 |
(Coniferous sawn timber; Defects; Terms and definitions Trilingual edition) |
| ISO 10310-1995 |
神经外科植入物.可植入神经刺激器的标记和包装 |
(Neurosurgical implants - Marking and packaging of implantable neural stimulators) |
| ISO 10312-1995 |
环境空气.石棉纤维的测定.用直接传递透射电子显微法 |
(Ambient air - Determination of asbestos fibres - Direct-transfer transmission electron microscopy method) |
| ISO 10313-1993 |
环境空气.臭氧质量浓度测定.化学发光法 |
(Ambient air; determination of the mass concentration of ozone; chemiluminescence method) |
| ISO 10315 Technical Corrigendum 1-2000 |
卷烟.烟雾冷凝物中尼古丁的测定.气相色谱法.技术勘误1 |
(Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method; Technical Corrigendum 1) |
| ISO 10315-2000 |
卷烟.烟雾冷凝物中烟碱的测定.气相色谱法 |
(Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method) |
| ISO 10316-1990 |
造船.B类磁罗经.试验和认证 |
(Shipbuilding; class B magnetic compasses; tests and certification) |
| ISO 10317-1992 |
滚动轴承.米制锥滚子轴承.名称和牌号体制 |
(Rolling bearings; metric tapered roller bearings; designation system) |
| ISO 10318-1990 |
土工织物.词汇 |
(Geotextiles; vocabulary) |
| ISO 10319-1993 |
土工织物.大宽度拉伸试验 |
(Geotextiles; wide-width tensile test) |
| ISO 1032-1974 |
针叶树锯材.尺寸.术语和定义.三种语言版 |
(Coniferous sawn timber; Sizes; Terms and definitions Trilingual edition) |
| ISO 10320-1999 |
土工织物和土工相关制品.现场鉴别 |
(Geotextiles and geotextile-related products - Identification on site) |
| ISO 10321-1992 |
土工织物.用大宽度法测定接头/接缝处的拉伸试验 |
(Geotextiles; tensile test for joints/seams by wide-width method) |
| ISO 10322-1-1996 |
眼科光学.半成品眼镜坯.第1部分:单光透镜毛坯和多焦透镜坯规范 |
(Ophthalmic optics - Semi-finished spectacle lens blanks - Part 1: Specifications for single-vision and multifocal lens blanks) |
| ISO 10322-2-1996 |
眼科光学.半成品眼镜镜坯.第2部分:渐变眼镜毛坯规范 |
(Ophthalmic optics - Semi-finished spectacle lens blanks - Part 2: Specifications for progressive power lens blanks) |
| ISO 10323-1991 |
牙科用旋转器械.盘片和轮的内径 |
(Dental rotary instruments; bore diameters for discs and wheels) |
| ISO 10324-1997 |
情报和文献.保存说明.概括程度 |
(Information and documentation - Holdings statements - Summary level) |
| ISO 10326-1-1992 |
机械振动.车辆座位振动评价的实验室方法.第1部分:基本要求 |
(Mechanical vibration; laboratory method for evaluating vehicle seat vibration; part 1: basic requirements) |
| ISO 10326-2-2001 |
机械振动.车辆座位振动评价的实验室方法.第2部分:铁路车辆的应用 |
(Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 2: Application to railway vehicles) |
| ISO 10327-1995 |
飞机.空运货物用合格飞机集装箱规范和试验 |
(Aircraft - Certified aircraft container for air cargo - Specification and testing) |
| ISO 10328-1-1996 |
修复术.假腿修复的结构检验.第1部分:试验布局 |
(Prosthetics - Structural testing of lower-limb prostheses - Part 1: Test configurations) |
| ISO 10328-2-1996 |
修复术.假腿修复的结构检验.第2部分:试验样品 |
(Prosthetics - Structural testing of lower-limb prostheses - Part 2: Test samples) |
| ISO 10328-3-1996 |
修复术.假腿修复的结构试验.第3部分:主要结构试验 |
(Prosthetics - Structural testing of lower-limb prostheses - Part 3: Principal structural tests) |
| ISO 10328-4-1996 |
修复术.假腿修复的结构检验.第4部分:主要结构试验的载荷系数 |
(Prosthetics - Structural testing of lower-limb prostheses - Part 4: Loading parameters of principal structural tests) |
| ISO 10328-5-1996 |
修复术.假腿修复的结构检验.第5部分:备用结构试验 |
(Prosthetics - Structural testing of lower-limb prostheses - Part 5: Supplementary structural tests) |
| ISO 10328-6-1996 |
修复术.假腿修复的结构检验.第6部分:备用结构试验的载荷系数 |
(Prosthetics - Structural testing of lower-limb prostheses - Part 6: Loading parameters of supplementary structural tests) |
| ISO 10328-7-1996 |
修复术.假腿修复的结构检验.第7部分:检验提交文件 |
(Prosthetics - Structural testing of lower-limb prostheses - Part 7: Test submission document) |
| ISO 10328-8-1996 |
修复术.假腿修复的结构检验.第8部分:试验报告 |
(Prosthetics - Structural testing of lower-limb prostheses - Part 8: Test report) |
| ISO 1033-1975 |
飞机.一般用途按拉三极断路器的尺寸 |
(Aircraft; Dimensions for general purpose push-pull three-pole circuit-breakers) |
| ISO 10330-2002 |
摄影.同步闪光器,摄影机和闪光装置点燃电路和连接器.电特性及其试验方法 |
(Photography - Synchronizers, ignition circuits and connectors for cameras and photoflash units - Electrical characteristics and test methods) |
| ISO 10332-1994 |
受压力的无缝和焊(埋弧焊除外)接钢管.校验液压防泄漏的超声波检验 |
(Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; ultrasonic testing for verification of hydraulic leak-tightness) |
| ISO 10333-1 AMD 1-2002 |
防人员坠落系统.第1部分:全套衣帽装备.修改件1 |
(Personal fall-arrest systems - Part 1: Full-body harnesses; Amendment 1) |
| ISO 10333-1-2000 |
人员坠落制动系统.第1部分:整体吊带 |
(Personal fall-arrest systems - Part 1: Full-body harnesses) |
| ISO 10333-2-2000 |
人员跌落制动系统.第2部分:牵索和能量吸收器 |
(Personal fall-arrest systems - Part 2: Lanyards and energy absorbers) |
| ISO 10333-3-2000 |
人员跌落制动系统.第3部分:自收缩救生线 |
(Personal fall-arrest systems - Part 3: Self-retracting lifelines) |
| ISO 10333-4-2002 |
人员坠落救护系统.第4部分:垂直下落和滑动型下落救护车连接的垂直升降索道 |
(Personal fall-arrest systems - Part 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester) |
| ISO 10333-5-2001 |
防人员坠落系统.第5部分:自锁和自闭门的连接件 |
(Personal fall-arrest systems - Part 5: Connectors with self-closing and self-locking gates) |
| ISO 10333-6-2004 |
个人防跌落系统.第6部分:系统性能试验 |
|
| ISO 10334-1994 |
外科用植入物.用于缝合和其它外科手段的韧性钢丝 |
(Implants for surgery - Malleable wires for use as sutures and other surgical applications) |
| ISO 10335-1990 |
橡胶和塑料鞋靴.命名 |
(Rubber and plastics footwear; nomenclature) |
| ISO 10336-1997 |
原油.水的测定.Karl Fischer电位滴定法 |
(Crude petroleum - Determination of water - Potentiometric Karl Fischer titration method) |
| ISO 10337-1997 |
原油.水的测定.Karl Fischer电量滴定法 |
(Crude petroleum - Determination of water - Coulometric Karl Fischer titration method) |
| ISO 10338-1996 |
光学及光学仪器.接触镜片.曲率的测定 |
(Optics and optical instruments - Contact lenses - Determination of curvature) |
| ISO 10339-1997 |
眼科光学.接触镜片.水晶镜片含水量的测定 |
(Ophthalmic optics - Contact lenses - Determination of water content of hydrogel lenses) |
| ISO 1034-1973 |
飞机.地面空气调节连接装置 |
(Aircraft; Ground air-conditioning connections) |
| ISO 10340-1995 |
光学和光学仪器.接触镜片可萃取材料的测定方法 |
(Optics and optical instruments - Contact lenses - Method for determining the extractable substances) |
| ISO 10341-1997 |
眼科仪器.折射透镜突出部 |
(Ophthalmic instruments - Refractor heads) |
| ISO 10342-2003 |
眼科仪器.眼睛折射计 |
(Ophthalmic instruments - Eye refractometers) |
| ISO 10342-2003 |
眼科仪器.眼睛折射计 |
|
| ISO 10343-1997 |
眼科仪器.眼膜曲率计 |
(Ophthalmic instruments - Ophthalmometers) |
| ISO 10344-1996 |
光学及光学仪器.接触镜片.接触透镜试验用含盐溶液 |
(Optics and optical instruments - Contact lenses - Saline solution for contact lens testing) |
| ISO 10345-1-1992 |
玻璃.光学应力系数的测定.第1部分:抗拉试验 |
(Glass; determination of stress-optical coefficient; part 1: tensile test) |
| ISO 10345-2-1992 |
玻璃.光学应力系数的测定.第2部分:弯曲试验 |
(Glass; determination of stress-optical coefficient; part 2: bending test) |
| ISO 10347-1999 |
蜗轮齿.蜗轮的几何尺寸.蜗轮齿单位,中心距离,用户提供给齿轮生产商的信息目录牌 |
(Worm gears - Geometry of worms - Name plates for worm gear units, centre distances, information to be supplied to gear manufacturer by the purchaser) |
| ISO 10348-1993 |
摄影技术.冲洗废液.银含量测定 |
(Photography; processing wastes; determination of silver content) |
| ISO 10349-1-2002 |
摄影.摄影级化学品.试验方法.第1部分:总则 |
(Photography - Photographic-grade chemicals; Test methods - Part 1: General) |
| ISO 10349-10-1992 |
摄影技术.摄影级化学药品.试验方法.第10部分:硫化物含量测定 |
(Photography; photographic-grade chemicals; test methods; part 10: determination of sulfide content) |
| ISO 10349-11-1992 |
摄影技术.摄影级化学药品.试验方法.第11部分:比重测定 |
(Photography; photographic-grade chemicals; test methods; part 11: determination of specific gravity) |
| ISO 10349-12-1992 |
摄影技术.摄影级化学药品.试验方法.第12部分:密度测定 |
(Photography; photographic-grade chemicals; test methods; part 12: determination of density) |
| ISO 10349-13-2002 |
摄影.摄影级化学品.试验方法.第13部分:pH值的测定 |
(Photography - Photographic-grade chemicals; Test methods - Part 13: Determination of pH) |
| ISO 10349-2-1992 |
摄影技术.摄影级化学药品.试验方法.第2部分:可溶于水物质的测定 |
(Photography; photographic-grade chemicals; test methods; part 2: determination of matter insoluble in water) |
| ISO 10349-3-1992 |
摄影技术.摄影级化学药品.试验方法.第3部分:可溶于氢氧化铵溶液物质的测定 |
(Photography; photographic-grade chemicals; test methods; part 3: determination of matter insoluble in ammonium hydroxide solution) |
| ISO 10349-4-1992 |
摄影技术.摄影级化学药品.试验方法.第4部分:燃烧残留物测定 |
(Photography; photographic-grade chemicals; test methods; part 4: determination of residue after ignition) |
| ISO 10349-5-1992 |
摄影技术.摄影级化学药品.试验方法.第5部分:重金属和铁含量测定 |
(Photography; photographic-grade chemicals; test methods; part 5: determination of heavy metal and iron content) |
| ISO 10349-6-1992 |
摄影技术.摄影级化学药品.试验方法.第6部分:卤化物含量测定 |
(Photography; photographic-grade chemicals; test methods; part 6: determination of halide content) |
| ISO 10349-7-1992 |
摄影技术.摄影级化学药品.试验方法.第7部分:碱或酸的测定 |
(Photography; photographic-grade chemicals; test methods; part 7: determination of alkalinity or acidity) |
| ISO 10349-8-2002 |
摄影.摄影级化学品.试验方法.第8部分:挥发性物质的测定 |
(Photography - Photographic-grade chemicals; Test methods - Part 8: Determination of volatile matter) |
| ISO 10349-9-1992 |
摄影技术.摄影级化学药品.试验方法.第9部分:与含氨硝酸银的反应 |
(Photography; photographic-grade chemicals; test methods; part 9: reaction to ammoniacal silver nitrate) |
| ISO 1035-1-1980 |
热轧钢棒材.第1部分:圆钢尺寸 |
(Hot-rolled steel bars; Part 1 : Dimensions of round bars) |
| ISO 1035-2-1980 |
热轧钢棒材.第2部分:方钢尺寸 |
(Hot-rolled steel bars; Part 2 : Dimensions of square bars) |
| ISO 1035-3-1980 |
热轧钢棒材.第3部分:扁钢尺寸 |
(Hot-rolled steel bars; Part 3 : Dimensions of flat bars) |
| ISO 1035-4-1982 |
热轧钢棒材.第4部分:公差 |
(Hot-rolled steel bars; Part 4 : Tolerances) |
| ISO 10350-1-1998 |
塑料.可比单点数据的采集和表示法.第1部分:模塑材料 |
(Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials) |
| ISO 10350-2-2001 |
塑料.可比单点数据的采集和表示法.第2部分:长纤维增强塑料 |
(Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics) |
| ISO 10352-1997 |
纤维增强塑料.模制化合物和聚酯胶片.单位面积质量的测定 |
(Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area) |
| ISO 10354-1992 |
粘合剂.构造胶接组件耐久性的表征.楔形破裂试验 |
(Adhesives; caracterization of durability of structural-adhesive-bonded assemblies; wedge rupture test) |
| ISO 10355-1994 |
机动脚踏两用车.照明和照明信号装置 |
(Mopeds - Positioning of lighting and light-signalling devices) |
| ISO 10355-2004 |
轻便摩托车.照明和光信号装置的定位 |
|
| ISO 10356-1996 |
电影摄影术.硝酸盐基电影胶片的储存和搬运 |
(Cinematography - Storage and handling of nitrate-base motion-picture films) |
| ISO 10359-1-1992 |
水质.氟化物测定.第1部分:用电化学探头法测定饮用水和轻度污染的水 |
(Water quality; determination of fluoride; part 1: electrochemical probe method for potable and lightly polluted water) |
| ISO 10359-2-1994 |
水质.氟化物测定.第2部分:分解和蒸馏后无机胶粘剂的总氟化物的测定 |
(Water quality - Determination of fluoride - Part 2: Determination of inorganically bound total fluoride after digestion and distillation) |
| ISO 1036-1984 |
纺织机械.染整机.左、右侧的定义 |
(Textile machinery; Dyeing and finishing machines; Definition of left and right sides) |
| ISO 10360-1 Technical Corrigendum 1-2002 |
产品几何量技术规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第1部分:词汇.技术勘误1 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 1: Vocabulary; Technical Corrigendum 1) |
| ISO 10360-1-2000 |
几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第1部分:词汇 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 1: Vocabulary) |
| ISO 10360-2-2001 |
产品几何量规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第2部分:测量尺寸用坐标式测量设备 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring size) |
| ISO 10360-3-2000 |
几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第3部分:旋转台的轴线作为第四条轴线的坐标式测 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis) |
| ISO 10360-4 Technical Corrigendum 1-2002 |
产品几何量技术规范(GPS).坐标测量机(CMM)的验收和复检试验.第4部分:用于扫描型坐标机.技术勘误1 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode; Technical Corrigendum 1) |
| ISO 10360-4-2000 |
几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第4部分:用于扫描测量模式的坐标式测量仪器 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode) |
| ISO 10360-5-2000 |
几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第5部分:带多针尖探测系统的坐标式测量设备 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems) |
| ISO 10360-6-2001 |
产品几何量技术规范(GPS).坐标测量机(CMM)的验收和复检试验.第6部分:计算高斯相关特性误差的估计 |
(Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features) |
| ISO 10361-2000 |
铺地织物.用VETTERMANN转子和六足转鼓试验器改变外观的生产 |
(Textile floor coverings - Production of changes in appearance by means of Vettermann drum and hexapod tumbler testers) |
| ISO 10362-1-1999 |
卷烟.烟雾凝聚物中水分的测定.第1部分:气相色谱法 |
(Cigarettes - Determination of water in smoke condensates - Part 1: Gas-chromatographic method) |
| ISO 10362-2-1994 |
卷烟.烟雾凝聚物中水分的测定.第2部分:卡尔.费歇尔法 |
(Cigarettes; determination of water in smoke condensates; part 2: Karl Fischer method) |
| ISO 10363-1992 |
热熔粘胶剂.热稳定性测定 |
(Hot-melt adhesives; determination of thermal stability) |
| ISO 10364-1993 |
粘合剂.多组胶粘剂的适用期的测定 |
(Adhesives; determination of working life (pot life) of multi-component adhesives) |
| ISO 10365-1992 |
粘合剂.主要失效型式的名称与符号 |
(Adhesives; designation of the main failure patterns) |
| ISO 10366-1-2002 |
塑料.甲基丙烯酸甲酯/丁二烯/苯乙烯共聚物(ABS)的模塑和挤塑材料.命名系统和规范基础 |
(Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications) |
| ISO 10366-2-1994 |
塑料制品.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯模制品和挤塑用料.第2部分:试验试样的制备和性能测定 |
(Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties) |
| ISO 10366-2-2003 |
塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯(MABS)模塑和挤塑材料.第2部分:试样制备和性能测定 |
|
| ISO 10368-1992 |
货物保温集装箱.远程调节监示 |
(Freight thermal containers; remote condition monitoring) |
| ISO 10370-1993 |
石油产品.碳渣的测定.微米法 |
(Petroleum products; determination of carbon residue; micro method) |
| ISO 10371-1993 |
增强材料.编织带.基本规范 |
(Reinforcement materials; braided tapes; basis for a specification) |
| ISO 10372-1992 |
液压传动.4和5阀口伺服阀.安装面 |
(Hydraulic fluid power; four- and five-port servovalves; mounting surfaces) |
| ISO 10374 AMD 1-1995 |
货运集装箱.自动识别符号.修改件1 |
(Freight containers - Automatic identification; Amendment 1) |
| ISO 10374-1991 |
货运集装箱.自动识别符 |
(Freight containers; automatic identification) |
| ISO 10375-1997 |
无损检验.超声检验.检验设备和声场特性 |
(Non-destructive testing - Ultrasonic inspection - Characterization of search unit and sound field) |
| ISO 10378-1994 |
硫化铜浓缩物.金和银含量测定.火焰分析重量和原子吸收光谱测定法 |
(Copper sulfide concentrates - Determination of gold and silver contents - Fire assay gravimetric and atomic absorption spectrometric method) |
| ISO 10380-2003 |
管道系统.波纹状金属软管和软管配件 |
(Pipework - Corrugated metal hoses and hose assemblies) |
| ISO 10380-2003 |
管道系统.波纹状金属软管和软管配件 |
|
| ISO 10381-1-2002 |
土质.取样.第1部分:取样方法的设计指南 |
(Soil quality - Sampling - Part 1: Guidance on the design of sampling programmes) |
| ISO 10381-2-2002 |
土质.取样.取样方法指南 |
(Soil quality - Sampling - Part 2: Guidance on sampling techniques) |
| ISO 10381-3-2001 |
土质.取样.第3部分:安全指南 |
(Soil quality - Sampling - Part 3: Guidance on safety) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com