标准号 |
中文名称 |
英文名称 |
| ISO 8676-1999 |
米制细牙螺纹六角头螺钉.产品等级A级和B级 |
Hexagon head screws with metric fine pitch thread - Product grades A and B |
| ISO 8678-1988 |
带小头和短颈的圆头方颈螺栓 |
Cup head square neck bolts with small head and short neck; product grade B |
| ISO 868-1985 |
塑料和硬质橡胶.用硬度计测定压痕硬度[肖氏(SHORE)硬度] |
Plastics and ebonite; Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 868-2003 |
塑料和硬质胶.用硬度计测定针入硬度[肖氏(SHORE)硬度] |
(Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)) |
| ISO 868-2003 |
塑料和硬质胶.用硬度计测定针入硬度[肖氏(SHORE)硬度] |
|
| ISO 8681-1986 |
石油产品和润滑剂.分类法.等级的定义 |
Petroleum products and lubricants; Method of classification; Definition of classes |
| ISO 8682-1987 |
苹果.在受控气氛下贮存 |
Apples; Storage in controlled atmospheres |
| ISO 8683-1988 |
莴笋.预冷和冷藏运输指南 |
Lettuce; guide to precooling and refrigerated transport |
| ISO 8685-1992 |
铝矿石.取样规程 |
Aluminium ores; sampling procedures |
| ISO 8686-1-1989 |
起重机.载荷和复合载荷的设计原理.第1部分:总则 |
Cranes; design principles for loads and load combinations; part 1: general |
| ISO 8686-2-2004 |
起重机.载荷和载荷组合的设计原则.第2部分:汽车起重机 |
|
| ISO 8686-3-1998 |
起重机.载荷和复合载荷的设计原理.第3部分:塔式起重机 |
Cranes - Design principles for loads and load combinations - Part 3: Tower cranes |
| ISO 8686-5-1992 |
起重机.负载和复合负载设计原则.第5部分:矢量绘图器 |
Cranes; design principles for loads and load combinations; part 5: overhead travelling and portal bridge cranes |
| ISO 8687-1987 |
电影技术.8mmS型,16mm和35mm变积式光学声带的信号与噪声比.测量方法 |
Cinematography; Signal-to-noise ratio of 8 mm Type S, 16 mm and 35 mm variable-area photographic sound records; Method of measurement |
| ISO 8688-1-1989 |
铣刀寿命试验.第1部分:平面铣刀 |
Tool life testing in milling; part 1: face milling |
| ISO 8688-2-1989 |
铣刀寿命试验.第2部分:立铣刀 |
Tool life testing in milling; part 2: end milling |
| ISO 8689-1-2000 |
水质.江河的生物分类.第1部分:对海底微型无脊椎动物调查的生物质量数据的解释指南 |
Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates |
| ISO 8689-2-2000 |
水质.江河的生物分类.第2部分:对海底微型无脊椎动物调查的生物质量数据的表示指南 |
Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates |
| ISO 8690-1988 |
放射污染表面的清除.试验方法和清除的容易评价方法 |
Decontamination of radioactively contaminated surfaces; method for testing and assessing the ease of decontamination |
| ISO 8691-1994 |
石油产品.液体燃料中钒的最低含量.焚烧后用无火焰原子吸收光谱法测定 |
Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing |
| ISO 8692-1989 |
水质.用绿藻类栅薄属的Subspicatus和月牙藻属的capricornutum做淡水藻类生长抑制试验 |
Water quality; fresh water algal growth inhibition test with scenedesmus subspicatus and selenastrum capricornutum |
| ISO 8692-2004 |
水质.用单细胞绿藻类进行的淡水藻类生长抑制性试验 |
|
| ISO 8692-2004 |
水质.用单细胞绿藻类进行的淡水藻类生长抑制性试验 |
|
| ISO 8693-1998 |
铸模工具.扁顶杆 |
Tools for moulding - Flat ejector pins |
| ISO 8694-1998 |
模压工具.有肩的脱模顶销 |
Tools for moulding - Shouldered ejector pins |
| ISO 8695-1987 |
压制用工具.冲头.命名和术语.两种语言版 |
Tools for pressing; Punches; Nomenclature and terminology Bilingual edition |
| ISO 8697-1999 |
原油和石油产品.运输的可计算性.装船数量和留在船上的数量的评定 |
Crude petroleum and petroleum products - Transfer accountability - Assessment of on board quantity (OBQ) and quantity remaining on board (ROB) |
| ISO 8705-1991 |
机动脚踏两用车.重心位置的测量方法 |
Mopeds; measurement method for location of centre of gravity |
| ISO 8706-1990 |
二轮机动脚踏两用车.侧立和直立停车稳定性 |
Two-wheeled mopeds; parking stability of side- and centre-stands |
| ISO 8709 Technical Corrigendum 1-1998 |
机动脚踏两用车.制动器和制动设备.试验和测量方法.技术勘误表1 |
Mopeds - Brakes and braking devices - Tests and measurement methods; Technical Corrigendum 1 |
| ISO 8709-1995 |
机动脚踏两用车.制动器和制动设备.试验和测量方法 |
Mopeds - Brakes and braking devices - Tests and measurement methods |
| ISO 871-1996 |
塑料.用热风炉测定点燃温度 |
Plastics - Determination of ignition temperature using a hot-air furnace |
| ISO 8714-2002 |
电动道路车辆.标准耗能和范围.承用车和轻型商用车辆的试验规程 |
Electric road vehicles - Reference energy consumption and range - Test procedures for passenger cars and light commercial vehicles |
| ISO 8715-2001 |
电动道路车辆.道路操作特性 |
Electric road vehicles - Road operating characteristics |
| ISO 8716-2001 |
道路车辆.第五轮中枢销.强度试验 |
Road vehicles - Fifth wheel kingpins - Strength test |
| ISO 8717-2000 |
商业用道路车辆.第五轮连接器.强度试验 |
Commercial road vehicles - Fifth wheel couplings - Strength tests |
| ISO 8718-2001 |
道路车辆.铰接拉杆耦合器和孔.强度试验 |
Road vehicles - Drawbar couplings and eyes for hinged drawbars - Strength tests |
| ISO 8720-1991 |
客车.机械式千斤顶规范 |
Passengers cars; specifications for mechanical jacks |
| ISO 8721-1987 |
道路车辆.冲撞试验测量技术.光学仪器设备 |
Road vehicles; Measurement techniques in impact tests; Optical instrumentation |
| ISO 8723-1986 |
炼铝用碳素材料.煅烧焦炭.油含量的测定.溶剂萃取法 |
Carbonaceous materials for the production of aluminium; Calcined coke; Determination of oil content; Method by solvent extraction |
| ISO 8724-1989 |
软木装饰板.规范 |
Cork decorative panels; specification |
| ISO 8727-1997 |
机械振动和冲击.人控曝光器.生物动力坐标体系 |
Mechanical vibration and shock - Human exposure - Biodynamic coordinate systems |
| ISO 8728-1997 |
造船和航海技术.航海用陀罗仪器 |
Ships and marine technology - Marine gyro-compasses |
| ISO 8729-1997 |
造船和航海技术.海上雷达反射器 |
Ships and marine technology - Marine radar reflectors |
| ISO 873-1980 |
桃子.冷藏指南 |
Peaches; Guide to cold storage |
| ISO 8730 Technical Corrigendum 1-1999 |
银行业务.对电文鉴别(批量)的要求.技术勘误1 |
Banking - Requirements for message authentication (wholesale); Technical Corrigendum 1 |
| ISO 8730-1990 |
银行业务.对电文鉴别(批量)的要求 |
Banking; requirements for message authentication (wholesale) |
| ISO 8731-1-1987 |
银行业务.对电文鉴定的认可规则.第1部分:DEA |
Banking; Approved algorithms for message authentication; Part 1 : DEA |
| ISO 8731-2-1992 |
银行业务.对电文鉴定的认可规则.第2部分:电文鉴定规则 |
Banking; approved algorithms for message authentication; part 2: message authenticator algorithm |
| ISO 8732 Technical Corrigendum 1-1999 |
银行业务.关键管理(大批经营).技术勘误1 |
Banking - Key management (wholesale); Technical Corrigendum 1 |
| ISO 8732-1988 |
银行业务.关键管理(大批经营) |
Banking; key management (wholesale) |
| ISO 8733-1997 |
未淬硬钢或奥氏体钢制有内螺孔的平行销 |
Parallel pins with internal thread, of unhardened steel or austenitic stainless steel |
| ISO 8734-1997 |
淬硬钢和马氏体不锈钢制平行销(定位销) |
Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) |
| ISO 8735-1997 |
淬硬钢和马氏体不锈钢制带内螺纹的平行销 |
Parallel pins with internal thread, of hardened steel and martensitic stainless steel |
| ISO 8736-1986 |
未淬硬的有内螺孔的锥销 |
Taper pins with internal thread, unhardened |
| ISO 8737-1986 |
未淬硬的有外螺纹的锥销 |
Taper pins with external thread, unhardened |
| ISO 8738-1986 |
U 形夹销的平垫圈.产品等级A |
Plain washers for clevis pins; Product grade A |
| ISO 8739-1997 |
带槽销.带导向的直通油槽销 |
Grooved pins - Full-length parallel grooved, with pilot |
| ISO 874-1980 |
新鲜水果和蔬菜.取样 |
Fresh fruits and vegetables; Sampling |
| ISO 8740-1997 |
带槽销.有倒角的全长直槽型销 |
Grooved pins - Full-length parallel grooved, with chamfer |
| ISO 8741-1997 |
带槽销.半长倒锥槽型销 |
Grooved pins - Half-length reverse-taper grooved |
| ISO 8742-1997 |
带槽销.中部三分之一长槽型销 |
Grooved pins - One-third-length centre grooved |
| ISO 8743-1997 |
带槽销.中部长槽型销 |
Grooved pins - Half-length centre grooved |
| ISO 8744-1997 |
带槽销.全长锥槽型销 |
Grooved pins - Full-length taper grooved |
| ISO 8745-1997 |
带槽销.半长锥槽型销 |
Grooved pins - Half-length taper grooved |
| ISO 8746-1997 |
圆头带槽销 |
Grooved pins with round head |
| ISO 8747-1997 |
沉头带槽销 |
Grooved pins with countersunk head |
| ISO 8748-1997 |
弹簧型开口直销.重载盘绕式 |
Spring-type straight pins - Coiled, heavy duty |
| ISO 8749-1986 |
销子和带槽销.剪切试验 |
Pins and grooved pins; Shear test |
| ISO 875-1999 |
香精油.与乙醇可混溶性的评定 |
Essential oils - Evaluation of miscibility in ethanol |
| ISO 8750-1997 |
弹簧型开口直销.标准负荷盘绕式 |
Spring-type straight pins - Coiled, standard duty |
| ISO 8751-1997 |
弹簧型开口直销.轻负荷盘绕式 |
Spring-type straight pins - Coiled, light duty |
| ISO 8752-1997 |
弹簧型开口直销 |
Spring-type straight pins - Slotted, heavy duty |
| ISO 8754-1992 |
石油产品.硫含量测定.能量分散X射线荧光法 |
Petroleum products; determination of sulfur content; energy-dispersive X-ray fluorescence method |
| ISO 8754-2003 |
石油产品.硫含量的测定.能量分散X射线荧光光谱测定法 |
(Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry) |
| ISO 8754-2003 |
石油产品.硫含量的测定.能量分散X射线荧光光谱测定法 |
|
| ISO 8755-2001 |
商用车辆.40mm牵引杆孔.互换性 |
Commercial road vehicles - 40 mm drawbar eye - Interchangeability |
| ISO 8756-1994 |
空气质量.温度、压力和湿度的数据处理 |
Air quality; handling of temperature, pressure and humidity data |
| ISO 8758-1992 |
电影技术.用16mm和35mm电影胶片和拷贝片进行的照相控制和数据记录.尺寸和 定位 |
Cinematography; photographic control and data records on 16 mm and 35 mm motion-picture film and prints; dimensions and location |
| ISO 8759-1-1998 |
农业轮式拖拉机.前悬装置.第1部分:功率输出和三点悬挂装置 |
Agricultural wheeled tractors - Front-mounted equipment - Part 1: Power take-off and three-point linkage |
| ISO 8759-2-1998 |
农业轮式拖拉机.前悬装置.第2部分:固定装置的连接 |
Agricultural wheeled tractors - Front-mounted equipment - Part 2: Stationary equipment connection |
| ISO 8760-1990 |
工作场所的空气.一氧化碳浓度的测定.带直接指示的快速取样用检测管法 |
Work-place air; determination of mass concentration of carbon monoxide; method using detector tubes for short-term sampling with direct indication |
| ISO 8761-1989 |
工作场所的空气.二氧化氮密浓度的测定.用直接指示的短期取样用检测管进行测定的方法 |
Work-place air; determination of mass concentration of nitrogen dioxide; method using detector tubes for short-term sampling with direct indication |
| ISO 8762-1988 |
工作场所空气.氯乙烯的测定.木炭管/气体色谱法 |
Workplace air; determination of vinyl chloride; charcoal tube/gas chromatographic method |
| ISO 8764-1-2004 |
螺钉和螺母用装配工具.十字槽头螺钉用旋具.第1部分:驱动头 |
|
| ISO 8764-1-2004 |
螺钉和螺母用装配工具.十字槽头螺钉用旋具.第1部分:驱动头 |
|
| ISO 8764-2-1992 |
十字头螺钉旋具.第2部分:一般要求、旋具头长度和手操作旋具标志 |
Screwdrivers for cross-recessed head screws; part 2: general requirements, lengths of blades and marking of hand-operated screwdrivers |
| ISO 8764-2-2004 |
螺钉和螺母用装配工具.十字槽头螺钉用旋具.第2部分:手动旋具刀身长度和标记的一般要求 |
|
| ISO 8764-2-2004 |
螺钉和螺母用装配工具.十字槽头螺钉用旋具.第2部分:手动旋具刀身长度和标记的一般要求 |
|
| ISO 8765-1999 |
米制细牙六角头螺栓.产品等级A和B |
Hexagon head bolts with metric fine pitch thread - Product grades A and B |
| ISO 8767-1992 |
客车轮胎.滚动阻力测量法 |
Passenger car tyres; methods of measuring rolling resistance |
| ISO 8768-1986 |
满装的运输包装.倒塌试验 |
Packaging; Complete, filled transport packages; Toppling test |
| ISO 8769-1988 |
表面污染监察器校准用参考源.β发射器(最大β能量大于0.15MeV)和α发射器 |
Reference sources for the calibration of surface contamination monitors; beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters |
| ISO 8769-2-1996 |
表面污染监视器校准用参考源.第2部分:能量小于0.15MeV的电子和能量小于1.5MeV的光子 |
Reference sources for the calibration of surface contamination monitors - Part 2: Electrons of energy less than 0,15 MeV and photons of energy less than 1,5 MeV |
| ISO 877-1994 |
塑料.暴露到直接风化、玻璃纤维对光的风化及使用屈折反光镜对日光增强风化的方法 |
Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
| ISO 8770-1991 |
建筑物内污物和废弃物排放(耐低温和高温)用高密度聚乙烯管和配件规范 |
High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications |
| ISO 8770-2003 |
建筑物内污、废水排放(低温和高温)用塑料管道系统.聚乙烯(PE) |
(Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE) ) |
| ISO 8770-2003 |
建筑物内污、废水排放(低温和高温)用塑料管道系统.聚乙烯(PE) |
|
| ISO 8772-1991 |
埋设的排水和污水装置用高密度聚乙烯管和配件规范 |
High density polyethylene (PE-HD) pipes and fittings for buried drainage and sewerage systems; specifications |
| ISO 8773-1991 |
埋设的排水和污水装置用聚乙烯管和配件规范 |
Polypropylene (PP) pipes and fittings for buried drainage and sewerage systems; specifications |
| ISO 8775-1988 |
航天.液压系统用氧气补充连接.尺寸(英制) |
Aerospace; gaseous oxygen replenishment connection for use in fluid systems (new type); dimensions (inch series) |
| ISO 8777-1993 |
情报和文献.交互式文本查找 |
Information and documentation; commands for interactive text searching |
| ISO 8778-2003 |
气压传动.标准参考大气 |
(Pneumatic fluid power - Standard reference atmosphere ) |
| ISO 8778-2003 |
气压传动.标准参考大气 |
|
| ISO 8779-2001 |
支渠灌溉聚乙烯管规范 |
Polyethylene (PE) pipes for irrigation laterals - Specifications |
| ISO 8780-1-1990 |
颜料和稀释剂.色散特性评定用色散方法.第1部分:前言 |
Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 1: introduction |
| ISO 8780-2-1990 |
颜料和稀释剂.色散特性评定用色散方法.第2部分:色散用振荡摇动机 |
Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 2: dispersion using an oscillatory shaking machine |
| ISO 8780-3-1990 |
颜料和稀释剂.色散特性评定用色散方法.第3部分:色散用高速叶轮机 |
Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 3: dispersion using a high-speed impeller mill |
| ISO 8780-4-1990 |
颜料和稀释剂.色散特性评定用色散方法.第4部分:色散用压片机 |
Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 4: dispersion using a bead mill |
| ISO 8780-5-1990 |
颜料和稀释剂.色散特性评定用色散方法.第5部分:色散用自动研磨机 |
Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 5: dispersion using an automatic muller |
| ISO 8780-6-1990 |
颜料和稀释剂.色散特性评定用色散方法.第6部分:色散用三组镇压机 |
Pigments and extenders; methods of dispersion for assessment of dispersion characteristics; part 6: dispersion using a triple-roll mill |
| ISO 8781-1-1990 |
颜料和稀释剂.色散特性评定方法.第1部分:有色颜料着色度变化的评定 |
Pigments and extenders; methods of assessment of dispersion characteristics; part 1: assessment from the change in tinting strength of coloured pigments |
| ISO 8781-2-1990 |
颜料和稀释剂.色散特性评定方法.第2部分:磨碎细度变化的评定 |
Pigments and extenders; methods of assessment of dispersion characteristics; part 2: assessment from the change in fineness of grind |
| ISO 8781-3-1990 |
颜料和稀释剂.色散特性评定方法.第3部分:光泽变化评定 |
Pigments and extenders; methodes of assessment of dispersion characteristics; part 3: assessment from the change in gloss |
| ISO 8782-1-1998 |
专用安全、防护和职业用鞋靴.第1部分:要求和试验方法 |
Safety, protective and occupational footwear for professional use - Part 1: Requirements and test methods |
| ISO 8782-2-1998 |
专用安全、防护和职业用鞋靴.第2部分:安全鞋靴规范 |
Safety, protective and occupational footwear for professional use - Part 2: Specification for safety footwear |
| ISO 8782-3-1998 |
专用安全、防护和职业用鞋靴.第3部分:防护鞋靴规范 |
Safety, protective and occupational footwear for professional use - Part 3: Specification for protective footwear |
| ISO 8782-4-1998 |
专用安全、防护和职业用鞋靴.第4部分:职业鞋靴规范 |
Safety, protective and occupational footwear for professional use - Part 4: Specification for occupational footwear |
| ISO 8782-5-2000 |
安全、防护和职业专用鞋靴.第5部分:附加要求和试验方法 |
Safety, protective and occupational footwear for professional use - Part 5: Additional requirements and test methods |
| ISO 8782-6-2000 |
安全、防护和职业专用鞋靴.第6部分:安全鞋靴附加规范 |
Safety, protective and occupational footwear for professional use - Part 6: Additional specifications for safety footwear |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com