标准号 |
中文名称 |
英文名称 |
| ISO 7388-1 ADD 1-1984 |
自动工具转换器用带7/24锥销的工具柄.柄号40、45和50.尺寸.修改1 |
(Tool shanks with 7/24 taper for automatic tool changers; shanks nos. 40, 45 and 50; dimensions; addendum 1) |
| ISO 7388-1-1983 |
自动刀具更换器的7/24锥度刀柄.第1部分:刀柄型号40,45和50.尺寸 |
(Tool shanks with 7/24 taper for automatic tool changers; Part 1 : Shanks Nos. 40, 45 and 50; Dimensions) |
| ISO 7388-2-1984 |
自动刀具更换器的7/24锥度刀柄.第2部分:40,45和50号刀柄的紧固钮.尺寸和机械特性 |
(Tool shanks with 7/24 taper for automatic tool changers; Part 2 : Retention knobs for shanks Nos. 40, 45 and 50; Dimensions and mechanical characteristics) |
| ISO 7389-2002 |
房屋建筑.连接件.密封胶回弹性的测定 |
(Building construction - Jointing products - Determination of elastic recovery of sealants) |
| ISO 7390-2002 |
房屋建筑.连接件.密封胶流动阻力的测定 |
(Building construction - Jointing products - Determination of resistance to flow of sealants) |
| ISO 7391-1-1996 |
塑料.聚碳酸酯模塑和挤塑材料.第1部分:命名体制和基本 |
(Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications) |
| ISO 7391-2-1996 |
塑料.聚碳酸酯模塑和挤塑材料.第2部分:试样制备和特性测定 |
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| ISO 7393-1 Technical Corrigendum 1-2001 |
水质.游离氯和总氯的测定.第1部分:使用N,N-二乙基-1,4-苯二胺的滴定法.技术勘误1 |
Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine; Technical Corrigendum 1 |
| ISO 7393-1-1985 |
水质.游离氯和氯的总含量测定.第1部分:利用N,N-二乙基-1,4-苯二胺的滴定法 |
Water quality; Determination of free chlorine and total chlorine; Part 1 : Titrimetric method using N,N-diethyl-1,4-phenylenediamine |
| ISO 7393-2-1985 |
水质.游离氯和氯的总含量测定.第2部分:为常规检验目的使用的N,N-二乙基-1,4-苯二胺比色法 |
Water quality; Determination of free chlorine and total chlorine; Part 2 : Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes |
| ISO 7393-3-1990 |
水质.游离氯和氯的总含量测定.第3部分:测定氯总含量的碘量滴定法 |
Water quality; determination of free chlorine and total chlorine; part 3: iodometric titration method for the determination of total chlorine |
| ISO 7396-1-2002 |
医用燃气管道系统.第1部分:医用压缩气体和真空管道 |
Medical gas pipeline systems - Part 1: Pipelines for compressed medical gases and vacuum |
| ISO 7396-2-2000 |
医用气体导管系统.第2部分:麻醉气体清除系统 |
Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems |
| ISO 7397-1-1993 |
客车.司机直接视野的验证.第1部分:车辆静态测量定位 |
Passenger cars; verification of driver`s direct field of view; part 1: vehicle positioning for static measurement |
| ISO 7397-2-1993 |
客车.司机直接视野的验证.第2部分:试验方法 |
Passenger cars; verification of driver`s direct field of view; part 2: test method |
| ISO 7398-1990 |
摩托车.直流闪光装置 |
Motorcycles; direct current flasher units |
| ISO 7399-1990 |
摩托车.交流闪光装置 |
Motorcycles; alternating current flasher units |
| ISO 74-1976 |
电影技术.在8mmR型电影胶片上由摄影片窗所形成的影象和可放映的最大影象.位置和尺寸 |
Cinematography; Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film; Positions and dimensions |
| ISO 740-1976 |
工业用碳酸钠.总可溶性碱度的测定.滴定法 |
Sodium carbonate for industrial use; Determination of total soluble alkalinity; Titrimetric method |
| ISO 7400-1990 |
轻便摩托车.交流闪光装置 |
Mopeds; alternating current flasher units |
| ISO 7401-2003 |
道路车辆.横向瞬态响应的试验方法.开路试验方法 |
Road vehicles - Lateral transient response tests methods - Open-loop test methods |
| ISO 7401-2003 |
道路车辆.横向瞬态响应的试验方法.开路试验方法 |
|
| ISO 7402-1993 |
微生物学.未复活肠杆菌计数通用指南.MPN技术和计群技术 |
Microbiology; general guidance for the enumeration of Enterobacteriaceae without resuscitation; MPN technique and colony-count technique |
| ISO 7403-1998 |
航空航天.花键传动.板手形状.米制系列 |
Aerospace - Spline drives - Wrenching configuration - Metric series |
| ISO 7404-1-1994 |
烟煤和无烟煤的岩相分析法.第1部分:词汇 |
Methods for the petrographic analysis of bituminous coal and anthracite - Part 1: Vocabulary |
| ISO 7404-2-1985 |
烟煤和无烟煤的岩相分析法.第2部分:煤的试样制备法 |
Methods for the petrographic analysis of bituminous coal and anthracite; Part 2 : Method of preparing coal samples |
| ISO 7404-3-1994 |
烟煤和无烟煤的岩相分析法.第3部分:煤素质组成的测定方法 |
Methods for the petrographic analysis of bituminous coal and anthracite - Part 3: Method of determining maceral group composition |
| ISO 7404-4-1988 |
烟煤和无烟煤的岩相分析法.第4部分:测定煤岩显微类型、碳矿石及矿石组成的方法 |
Methods for the petrographic analysis of bituminous coal and anthracite; part 4: method of determining microlithotype, carbominerite and minerite composition |
| ISO 7404-5-1994 |
烟煤和无烟煤的岩相分析法.第5部分:镜煤素质反射的显微测定方法 |
Methods for the petrographic analysis of bituminous coal and anthracite - Part 5: Method of determining microscopically the reflectance of vitrinite |
| ISO 7405-1997 |
牙科学.牙科医疗设备生物分解性的疾病前评定.牙科材料的试验方法 |
Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials |
| ISO 7407-1983 |
肥料.酸可溶性钾含量的测定.试验溶液的制备 |
Fertilizers; Determination of acid-soluble potassium content; Preparation of the test solution |
| ISO 7408-1983 |
肥料.用氢氧化钠处理时,有释放氨的其他物质存在的情况下氨型氮含量的测定.滴定法 |
Fertilizers; Determination of ammoniacal nitrogen content in the presence of other substances which release ammonia when treated with sodium hydroxide; Titrimetric method |
| ISO 7409-1984 |
肥料.标志.格式和说明 |
Fertilizers; Marking; Presentation and declarations |
| ISO 7410-1983 |
肥料和土壤改良剂.最终样品.实用准备方案 |
Fertilizers and soil conditioners; Final samples; Practical arrangements |
| ISO 7411-1984 |
高强度结构栓接用宽对边六角螺母(符合 ISO 888螺纹长度).产品等级C.性能类别8.8 和10.9 |
Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths according to ISO 888); Product grade C; Property classes 8.8 and 10.9 |
| ISO 7412-1984 |
高强度结构栓接用宽对边六角螺母(短螺纹).产品等级C.性能类别8.8 和10.9 |
Hexagon bolts for high-strength structural bolting with large width across flats (short thread length); Product grade C; Property classes 8.8 and 10.9 |
| ISO 7413-1984 |
热镀锌1 型(超尺寸攻丝)结构栓接用六角螺母.产品等级A 和B.性能类别5,6 和8 |
Hexagon nuts for structural bolting, style 1, hot-dip galvanized (oversize tapped); Product grades A and B; Property classes 5, 6 and 8 |
| ISO 7414-1984 |
1 型大宽对边结构栓接用宽对边六角螺母.产品等级B.性能类别10 |
Hexagon nuts for structural bolting with large width across flats, style 1; Product grade B; Property class 10 |
| ISO 7415-1984 |
淬硬和回火的高强度结构栓接用平垫圈 |
Plain washers for high-strength structural bolting, hardened and tempered |
| ISO 7416-1984 |
高强度结构栓接用淬硬和回火的倒角平垫圈 |
Plain washers, chamfered, hardened and tempered for high-strength structural bolting |
| ISO 7417-1984 |
结构栓接用六角螺母.热镀锌 2型(超尺寸攻丝).产品等级A.性能类别9 |
Hexagon nuts for structural bolting; Style 2, hot-dip galvanized (oversize tapped); Product grade A; Property class 9 |
| ISO 7418-1989 |
旅游居住车.词汇 |
Leisure accommodation vehicles; vocabulary |
| ISO 7419-1991 |
旅游居住车.通风要求 |
Leisure accommodation vehicles; ventilation requirements |
| ISO 742-1973 |
工业用碳酸钠.氯化物含量的测定.汞量法 |
Sodium carbonate for industrial use; Determination of chloride content; Mercurimetric method |
| ISO 7420-1987 |
旅居车.燃油的加热装置 |
Leisure accommodation vehicles; Oil-fired heating systems |
| ISO 7421-1991 |
娱乐旅居车.液化石油装置 |
Leisure accomodation vehicles; liquefied petroleum gas systems |
| ISO 7422-1991 |
旅游居住车.敞篷汽车.居住要求 |
Leisure accommodation vehicles; caravans; habitation requirements |
| ISO 7425-1-1988 |
液压传动.弹性体塑料表面密封件的腔.尺寸和公差.第1部分:活塞密封腔 |
Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 1: piston seal housings |
| ISO 7425-2-1989 |
液压传动.弹性体塑料表面密封件的腔.尺寸和公差.第2部分:活塞杆密封腔 |
Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 2: rod seal housings |
| ISO 7432-2002 |
玻璃纤维增强热固性塑料管道和管配件.检验设计带弹性体密封件的锁紧套筒连接件,包括双插孔连接件的试验方法 |
Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals |
| ISO 7434-1983 |
一字槽锥端紧定螺钉 |
Slotted set screws with cone point |
| ISO 7435-1983 |
一字槽长圆柱端紧定螺钉 |
Slotted set screws with long dog point |
| ISO 7436-1983 |
一字槽凹端紧定螺钉 |
Slotted set screws with cup point |
| ISO 7437-1990 |
技术制图.建筑制图.预制结构件的生产图纸的一般规则 |
Technical drawings; construction drawings; general rules for execution of production drawings for prefabricated structural components |
| ISO 7438-1985 |
金属材料.弯曲试验 |
Metallic materials; Bend test |
| ISO 7439-2002 |
含铜的宫内节育避孕器具.要求、试验 |
Copper-bearing intra-uterine contraceptive devices - Requirements, tests |
| ISO 7440-1-1991 |
道路车辆.燃油喷射设备试验.第1部分:标准的喷嘴和支架设备 |
Road vehicles; fuel injection equipment testing; part 1: calibration nozzle and holder assemblies |
| ISO 7440-2-1991 |
道路车辆.燃油喷射设备试验.第2部分:孔板流量测量 |
Road vehicles; fuel injection equipment testing; part 2 orifice plate flow-measurement |
| ISO 7441-1984 |
金属和合金的耐腐蚀性.双金属在露天暴露腐蚀试验中腐蚀的测定 |
Corrosion of metals and alloys; Determination of bimetallic corrosion in outdoor exposure corrosion tests |
| ISO 7442-1982 |
轮胎气门嘴.ISO芯腔NO·1 |
Tyre valves; ISO core chamber No. 1 |
| ISO 745-1976 |
工业用碳酸钠.在250℃时,质量损失和不挥发物的测定 |
Sodium carbonate for industrial use; Determination of loss of mass and of non-volatile matter at 250 degrees C |
| ISO 7451 Technical Corrigendum 1-1998 |
土方机械.液压挖掘机挖斗和主装载机铲斗的额定容量.技术勘误1 |
Earth-moving machinery - Volumetric ratings for hydraulic excavator buckets and backhoe loader buckets; Technical Corrigendum 1 |
| ISO 7451-1997 |
土方机械.液压挖掘机铲斗和反向铲装载铲斗的额定容积 |
Earth-moving machinery - Volumetric ratings for hydraulic excavator buckets and backhoe loader buckets |
| ISO 7452-2002 |
热轧结构钢板.尺寸和形状公差 |
Hot-rolled structural steel plates - Tolerances on dimensions and shape |
| ISO 7453-1984 |
电影技术.8mmS-11型有声电影摄影机胶片盒.胶片盒--摄影机接头和片芯轴驱动装置,尺寸和规范 |
Cinematography; Sound motion-picture camera cartridge, 8 mm Type S Model II; Cartridge-camera fit and take-up core drive; Dimensions and specifications |
| ISO 7454-1984 |
电影技术.8mm S-11型有声电影摄影机胶片盒.摄影机胶片的运行长度和片尾缺口.尺寸和规范 |
Cinematography; Sound motion-picture camera cartridge, 8 mm Type S Model Ii; Camera run length and end notches in film; Dimensions and specifications |
| ISO 7455-1984 |
电影技术.8mm S-11型有声电影摄影机胶片盒.胶片放映速度和狭缝.胶片盒的放映孔和胶片设别孔及彩色平衡滤光孔.尺寸和位置 |
Cinematography; Sound motion-picture camera cartridge, 8 mm Type S Model II; Slots and projection for film speed, cartridge hole and projection for film identification and colour-balancing filter; Dimensions and positions |
| ISO 7456-1984 |
电影技术.8mm S-11型有声电影摄机胶片盒.装片位置 |
Cinematography; Sound motion-picture camera cartridge, 8 mm Type S Model II; Film load position |
| ISO 7457-1997 |
土方机械.轮式机械转弯尺寸的测定 |
Earth-moving machinery - Determination of turning dimensions of wheeled machines |
| ISO 7458-1984 |
玻璃容器.抗内压性.试验方法 |
Glass containers; Internal pressure resistance; Test methods |
| ISO 7458-2004 |
玻璃容器.耐内压力.试验方法 |
|
| ISO 7459-1984 |
玻璃容器.抗热冲击和热冲击耐久性.试验方法 |
Glass containers; Thermal shock resistance and thermal shock endurance; Test methods |
| ISO 7459-2004 |
玻璃容器.抗热震性和热震耐久性.试验方法 |
|
| ISO 746-1976 |
工业用碳酸钠.在50℃时水不溶物的测定 |
Sodium carbonate for industrial use; Determination of matter insoluble in water at 50 degrees C |
| ISO 7460-1983 |
造船.船体型线.数据的识别 |
Shipbuilding; Shiplines; Identification of geometric data |
| ISO 7461-1984 |
造船.船体型线,船身各单几何形状数字表示法 |
Shipbuilding; Shiplines; Numerical representation of elements of the hull geometry |
| ISO 7462-1985 |
造船.船舶的基本尺寸.计算机应用的术语和定义 |
Shipbuilding; Principal ship dimensions; Terminology and definitions for computer applications Bilingual edition |
| ISO 7463-1990 |
造船和海上建筑物.计算机应用符号 |
Shipbuilding and marine structures; symbols for computer applications |
| ISO 7464-1983 |
土方机械.拉杆拉力的测试方法 |
Earth-moving machinery; Method of test for the measurement of drawbar pull |
| ISO 7465-2001 |
乘客电梯和服务电梯.电梯和平衡块的导轨.T型 |
Passenger lifts and service lifts - Guide rails for lift cars and counterweights - T-type |
| ISO 7466-1986 |
水果、蔬菜制品.5-羟甲基糖醛含量的测定 |
Fruit and vegetable products; Determination of 5-hydroxymethylfurfural (5-HMF) content |
| ISO 7475-2002 |
机械振动.平衡试验机.计量站用机罩和其他安全措施 |
Mechanical vibration - Balancing machines - Enclosures and other protective measures for the measuring station |
| ISO 7476-1990 |
核纯级质量的硝酸双氧铀溶液中铀的测定.重量法 |
Determination of uranium in uranyl nitrate solutions of nuclear grade quality; gravimetric method |
| ISO 7476-2003 |
核燃料技术.核级硝酸铀酰溶液中铀的测定.重量法 |
(Nuclear fuel technology - Determination of uranium in uranyl nitrate solutions of nuclear grade quality - Gravimetric method ) |
| ISO 7476-2003 |
核燃料技术.核级硝酸铀酰溶液中铀的测定.重量法 |
|
| ISO 7478 Technical Corrigendum 1-1989 |
信息处理系统.数据通信.多链路程序.技术勘误表1 |
Information processing systems; data communication; multilink procedures; technical corrigendum 1 |
| ISO 7478-1987 |
信息处理系统.数据通信.多链路过程 |
Information processing systems; Data communication; Multilink procedures |
| ISO 748-1997 |
明渠液体流量测量.速度面积法 |
Measurement of liquid flow in open channels - Velocity-area methods |
| ISO 7481-2000 |
航空航天.螺母.最高工作温度小于或等于425℃的自锁螺母.试验方法 |
Aerospace - Nuts, self-locking, with maximum operating temperature less than or equal to 425 鳦 - Test methods |
| ISO 7482-1-1998 |
山羊原皮.第1部分:缺陷的描述 |
Raw goat skins - Part 1: Descriptions of defects |
| ISO 7482-2-1999 |
山羊原皮.第2部分:根据质量和规格分级的导则 |
Raw goat skins - Part 2: Guidelines for grading on the basis of mass and size |
| ISO 7483 Technical Corrigendum 1-1995 |
符合ISO 7005标准的法兰密封垫圈的尺寸.技术勘误表1 |
Dimensions for gaskets for use with flanges to ISO 7005; Technical Corrigendum 1 |
| ISO 7483-1991 |
符合ISO 7005标准的法兰密封垫圈的尺寸 |
Dimensions of gaskets for use with flanges to ISO 7005 |
| ISO 7485-2000 |
动物饲料.钾和钠含量的测定.火焰发射分光光度测定法 |
Animal feeding stuffs - Determination of potassium and sodium contents - Methods using flame-emission spectrometry |
| ISO 7487-2-1985 |
信息处理.以限定的频率7958次磁通变换/弧度和1.9次变换/mm(48次变换/in)在两侧调制录制的130mm(5.25in)盒式软磁盘的数据交换.第2部分:磁道排列格式A |
Information processing; Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides; Part 2 : Track format A |
| ISO 7487-3 Technical Corrigendum 1-1991 |
信息处理.在130mm(5.25in)软磁盘上利用修正频率,以7985ftprad,1.9tpmm(48tpi)双面调制录制数据交换.第3部分:磁迹格式B.技术勘误表1 |
Information processing; data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1,9 tpmm (48 tpi), on both sides; part 3: track format B; technical corrigendum 1 |
| ISO 7487-3-1986 |
信息处理.以限定的频率7958ftprad和1.9tpmm(48次变换/in)在两侧调制录制的130毫米(5.25in)盒式软磁盘的数据交换.第3部分:磁道格式B |
Information processing; Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides; Part 3 : Track format B |
| ISO 7488-1991 |
牙科用混汞器 |
Dental amalgamators |
| ISO 749-1977 |
油料种子残渣.总灰分的测定 |
Oilseed residues; Determination of total ash |
| ISO 7490-2000 |
牙科用石膏粘接铸造包埋料 |
Dental gypsum-bonded casting investments |
| ISO 7491-2000 |
牙科材料.颜色稳定性的测定 |
Dental materials - Determination of colour stability |
| ISO 7492-1997 |
牙科用探针 |
Dental explorers |
| ISO 7493 Technical Corrigendum 1-1999 |
牙科医生凳.技术勘误1 |
Dental operator`s stool; Technical Corrigendum 1 |
| ISO 7493-1997 |
牙科医生凳 |
Dental operator`s stool |
| ISO 7494-1-2004 |
牙科学.牙科装置.第1部分:一般要求和试验方法 |
|
| ISO 7494-2-2003 |
牙科学.牙科综合治疗设备.第2部分:供水和供气 |
Dentistry - Dental units - Part 2: Water and air supply |
| ISO 7494-2-2003 |
牙科学.牙科综合治疗设备.第2部分:供水和供气 |
|
| ISO 7495-1990 |
小麦面粉.用机械设备测定湿式谷蛋白的含量 |
Wheat flour; determination of wet gluten content by mechanical means |
| ISO 7497-1984 |
肥料.无机酸可溶性磷酸盐的萃取 |
Fertilizers; Extraction of phosphates soluble in mineral acids |
| ISO 7498-2-1989 |
信息处理系统.开放系统互连.基本参考模型.第2部分:安全结构 |
Information processing systems; Open Systems Interconnection; basis reference model; Part 2: Security architecture |
| ISO 75-1-1993 |
塑料.载荷下偏转温度的测定.第1部分:一般试验方法 |
Plastics; determination of temperature of deflection under load; part 1: general test method |
| ISO 75-1-2004 |
塑料.载荷下挠曲温度的测定.第1部分:一般试验方法 |
|
| ISO 75-2-1993 |
塑料.载荷下偏转温度的测定.第2部分:塑料和橡木 |
Plastics; determination of temperature of deflection under load; part 2: plastics and ebonite |
| ISO 75-2-2004 |
塑料.载荷下挠曲温度的测定.第2部分:塑料和硬橡胶 |
|
| ISO 75-3-1993 |
塑料.载荷下偏转温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 |
Plastics; determination of temperature of deflection under load; part 3: high-strength thermosetting laminates and long-fibre-reinforced plastics |
| ISO 75-3-2004 |
塑料.载荷下挠曲温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 |
|
| ISO 750-1998 |
水果和蔬菜制品.可滴定酸度的测定 |
Fruit and vegetable products - Determination of titratable acidity |
| ISO 7500-1-1999 |
金属材料.静态单轴向试验机的校正.第1部分:拉伸/压缩试验机.力测量系统的检验和校正 |
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system |
| ISO 7500-1-2004 |
金属材料.静态单轴向试验机的验证.第1部分:拉伸/压缩试验机.力测量系统的验证和校正 |
|
| ISO 7500-2-1996 |
金属材料.静态单轴向试验机的校正.第2部分:拉伸蠕变试验机对作用负载力的校验 |
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied load |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com