标准号 |
中文名称 |
英文名称 |
ISO/TS 13499-2003 |
道路车辆.冲击试验用多媒体数据交换格式 |
(Road vehicles - Multimedia data exchange format for impact tests) |
ISO/TS 13499-2003 |
道路车辆.冲击试验用多媒体数据交换格式 |
|
ISO/TS 13571-2002 |
火灾威胁生命的部位.利用火灾数据脱逃有效时间的评定导则 |
(Life-threatening components of fire - Guidelines for the estimation of time available for escape using fire data) |
ISO/TS 13725-2001 |
液力传动.液压缸.测定抗弯强度的方法 |
(Hydraulic fluid power - Cylinders - Method for determining the buckling load) |
ISO/TS 13732-2-2001 |
热环境的人类工效学.与表面接触时人的反应的评定方法.第2部分:在适中温度时人与表面的接触 |
(Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 2: Human contact with surfaces at moderate temperature) |
ISO/TS 13762-2001 |
粒度分析.小角度X射线分散法 |
(Particle size analysis - Small angle X-ray scattering method) |
ISO/TS 13899-1-2004 |
钢.合金钢中钼、铌和钨含量的测定.感应耦合等离子原子发射光谱法.第1部分:钼含量的测定 |
|
ISO/TS 14048-2002 |
环境管理.生物圈评价.数据文件格式 |
(Environmental management - Life cycle assessment - Data documentation format) |
ISO/TS 14167-2003 |
气体分析.校准混合气体使用过程中的一般质量保证.指南 |
(Gas analysis - General quality assurance aspects in the use of calibration gas mixtures - Guidelines ) |
ISO/TS 14167-2003 |
气体分析.校准混合气体使用过程中的一般质量保证.指南 |
|
ISO/TS 14253-2-1999 |
几何产品规范(GPS).工件和测量设备测量的检验.第2部分:GPS测量中不确定度评价指南和在产品检验中测量设备的 |
(Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification) |
ISO/TS 14253-3-2002 |
产品几何量技术规范(GPS).工件的测量检验和测量设备.第3部分:测量不确定度声明达成一致的指南 |
(Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements) |
ISO/TS 14256-1-2003 |
土质.用氯化钾溶液萃取法测定湿地中硝酸盐、亚硝酸盐和铵的含量.第1部分:手工法 |
(Soil quality - Determination of nitrate, nitrite and ammonium in field-moist-soils by extraction with potassium chloride solution - Part 1: Manual method) |
ISO/TS 14256-1-2003 |
土质.用氯化钾溶液萃取法测定湿地中硝酸盐、亚硝酸盐和铵的含量.第1部分:手工法 |
|
ISO/TS 14423-1999 |
用于铝生产的含碳材料.冷压糊.通过喹啉萃取和测定集料尺寸分布来测定有效粘接剂含量和集料含量 |
(Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of effective binder content and aggregate content by extraction with quinoline, and determination of aggregate size distribution) |
ISO/TS 14425-1999 |
用于铝生产的含碳材料.冷压糊.未焙烤糊料的挥发物含量的测定 |
(Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of volatile-matter content of unbaked pastes) |
ISO/TS 14569-1-1999 |
牙科材料.磨损抗性的试验指南.第1部分:刷牙的磨损 |
(Dental materials - Guidance on testing of wear resistance - Part 1: Wear by tooth brushing) |
ISO/TS 14569-2-2001 |
牙科材料.磨损抗性的试验指南.第2部分:经过两和/或三次牙体接触后磨损抗性的测定 |
(Dental materials - Guidance on testing of wear - Part 2: Wear by two- and/or three body contact) |
ISO/TS 14798-2000 |
升降机(电梯)、电梯和乘客传送带.风险分析方法 |
(Lifts (elevators), escalators and passenger conveyors - Risk analysis methodology) |
ISO/TS 14815-2000 |
道路运输和交通信息技术.自动车辆和设备识别.系统规范 |
(Road transport and traffic telematics - Automatic vehicle and equipment identification - System specification) |
ISO/TS 14816-2000 |
道路运输和交通信息技术.自动车辆和设备识别.数字和数据结构 |
(Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structures) |
ISO/TS 14819-3-2000 |
交通及旅客信息(TTI).经过交通电文编码的TTI电文.第3部分:ALERT-C的定位 |
(Traffic and Traveller Information (TTI) - TTI messages via traffic message coding - Part 3: Location referencing for ALERT-C) |
ISO/TS 14904-2002 |
道路运输和交通远程信息管理.电子收费.操作员之间清算用接口规范 |
(Road transport and traffic telematics - Electronic fee collection (AFC) - Interface specification for clearing between operators) |
ISO/TS 14934-1-2002 |
对火反应的试验.辐射计和热通量仪的校准和使用.第1部分:通则 |
(Reaction-to-fire tests - Calibration and use of radiometers and heat flux meters - Part 1: General principles) |
ISO/TS 15000-1-2004 |
电子商务扩展标记语言.第1部分:合作协议纲要和一致性规范 |
|
ISO/TS 15000-2-2004 |
电子商务扩展标记语言.第2部分:文电服务规范 |
|
ISO/TS 15000-3-2004 |
电子商务扩展标记语言.第3部分:注册信息模型规范 |
|
ISO/TS 15000-4-2004 |
电子商务扩展标记语言.第4部分:注册服务规范 |
|
ISO/TS 15007-2-2001 |
道路车辆.驾驶员对运输信息和控制系统的可视行为的测量.第2部分:设备和程序 |
(Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 2: Equipment and procedures) |
ISO/TS 15077-2002 |
农业和林业用拖拉机和自动机械.操作控制器的自动力量,移动,锁定和操作方法 |
(Tractors and self-propelled machinery for agriculture and forestry - Operator controls - Actuating forces, displacement, location and method of operation) |
ISO/TS 15079-2001 |
机动草坪机具以及园艺设备.操作者控制设备.操作动力、位移、方位和方法指南 |
(Powered lawn, garden and horticultural equipment - Operator controls - Guidance on actuating forces, displacement, location and methods of operation) |
ISO/TS 15510-2003 |
不锈钢.化学成分 |
(Stainless steels - Chemical composition) |
ISO/TS 15510-2003 |
不锈钢.化学成分 |
|
ISO/TS 15530-3-2004 |
产品几何量的技术规范(GPS).坐标测量仪(CMM):测量不确定度的测定技术.第3部分:校准工件或标准件的使用 |
|
ISO/TS 15539-2000 |
心脏脉管植入物.内脉管修复 |
Cardiovascular implants - Endovascular prostheses |
ISO/TS 15624-2001 |
运输信息和控制系统.交通事故警报系统(TIWS).系统要求 |
Transport information and control systems - Traffic Impediment Warning Systems (TIWS) - System requirements |
ISO/TS 15666-2003 |
声学.用社会和社会声学测量法评定噪声干扰 |
Acoustics - Assessment of noise annoyance by means of social and socio-acoustic surveys |
ISO/TS 15666-2003 |
声学.用社会和社会声学测量法评定噪声干扰 |
|
ISO/TS 15694-2004 |
机械振动和冲击.从手持手扶机械到手-臂体系传导的单冲击的测量和评价 |
|
ISO/TS 15696-2000 |
起重机.等同术语表 |
Cranes - List of equivalent termes |
ISO/TS 15768-2000 |
明渠中液体流速的测量.电磁流量计的设计、选择和使用 |
Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters |
ISO/TS 15769-2000 |
比重测定.明渠和部分填充管里的液体流.多普勒流量计应用导则 |
Hydrometric determinations - Liquid flow in open channels and partly filled pipes - Guidelines for the application of Doppler-based flow measurements |
ISO/TS 15843-2000 |
保健产品的消毒.辐射消毒.检定剂量试验、消毒剂量审计和消毒剂量审计频率用产品系列和取样计划 |
Sterilization of health care products - Radiation sterilization - Product families and sampling plans for verification dose experiments and sterilization dose audits, and frequency of sterilization dose audits |
ISO/TS 15874-7-2003 |
冷热水装置用塑料管道系统.聚丙烯(PP).第7部分:合格评定指南 |
|
ISO/TS 15875-7-2003 |
冷热水装置用塑料管道系统.交联聚乙烯(PE-X).第7部分:合格评定指南 |
|
ISO/TS 15876-7-2003 |
冷热水装置用塑料管道系统.聚丁烯(PB).第7部分:合格评定指南 |
|
ISO/TS 15877-7-2003 |
冷热水装置用塑料管道系统.氯化聚氯乙烯(PVC-C).第7部分:合格评定指南 |
|
ISO/TS 16058-2004 |
医疗信息学.远程学习系统的交替使用性 |
|
ISO/TS 16071-2003 |
人-机交互作用的人类工效学.人-机接口可及性导则 |
Ergonomics of human-system interaction - Guidance on accessibility for human-computer interfaces |
ISO/TS 16071-2003 |
人-机交互作用的人类工效学.人-机接口可及性导则 |
|
ISO/TS 16312-1-2004 |
火灾危险和风险评估用获取燃烧馏出物毒性数据的物理防火模型的可行性评估指南.第1部分:标准 |
|
ISO/TS 16431-2002 |
液压传动.配件系统.清洁度的鉴定 |
Hydraulic fluid power - Assembled systems - Verification of cleanliness |
ISO/TS 16528-2002 |
锅炉和压力容器.促进国际认可的代码和标准的注册 |
Boilers and pressure vessels - Registration of Codes and Standards to promote international recoggnition |
ISO/TS 16628-2003 |
气管造口术用管.尺寸指定和标记的建议 |
(Tracheobronchial tubes - Recommendations for size designation and labelling) |
ISO/TS 16628-2003 |
气管造口术用管.尺寸指定和标记的建议 |
|
ISO/TS 16630-2003 |
金属材料.扩孔试验法 |
(Metallic materials - Method of hole expanding test) |
ISO/TS 16630-2003 |
金属材料.扩孔试验法 |
|
ISO/TS 16668-2000 |
基本语义学索引 |
Basic Semantics Register (BSR) |
ISO/TS 16799-1999 |
滚动轴承.动力额定负荷和额定寿命.基本动力额定负荷计算中的不连续性 |
Rolling bearings - Dynamic load ratings and rating life - Discontinuities in the calculating of basic dynamic load ratings |
ISO/TS 16922-2002 |
天然气.添味气体用导则 |
Natural gas - Guidelines for odorizing gases |
ISO/TS 16949-2002 |
质量管理体系.汽车生产和有关服务的部分组织应用ISO 9001:2000的特殊要求 |
Quality management systems - Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations |
ISO/TS 16951-2004 |
道路车辆.交通信息和控制系统的人类工效学方面.提供给司机的车载信息的优先度测定规程 |
|
ISO/TS 17090-1-2002 |
保健信息学.公开密钥基础设施.第1部分:框架和总览 |
Health informatics - Public key infrastucture - Part 1: Framework and overview |
ISO/TS 17090-2-2002 |
保健信息学.公开密钥基础设施.第2部分:合格证书文件 |
Health informatics - Public key infrastructure - Part 2: Certificate profile |
ISO/TS 17090-3-2002 |
保健信息学.公开密钥基础设施.第3部分:认证管理机构的政策管理 |
Health informatics - Public key infrastructure - Part 3: Policy management of certification authority |
ISO/TS 17117-2002 |
保健信息.受控的保健术语.结构和先进指示器 |
Health informatics - Controlled health terminology - Structure and high-level indicators |
ISO/TS 17120-2004 |
健康信息学.国家标识符标准 |
|
ISO/TS 17226-2003 |
皮革.化学试验.甲醛含量的测定 |
(Leather - Chemical tests - Determination of formaldehyde content) |
ISO/TS 17226-2003 |
皮革.化学试验.甲醛含量的测定 |
|
ISO/TS 17234-2003 |
皮革.化学试验.着色皮革中特定偶氮染色剂的测定 |
(Leather - Chemical tests - Determination of certain azo colourants in dyed leathers ) |
ISO/TS 17234-2003 |
皮革.化学试验.着色皮革中特定偶氮染色剂的测定 |
|
ISO/TS 17262-2003 |
自动车辆和设备识别.货物联运.标准号结构和数据结构 |
(Automatic vehicle and equipment identification - Intermodal goods transport - Numbering and data structures) |
ISO/TS 17262-2003 |
自动车辆和设备识别.货物联运.标准号结构和数据结构 |
|
ISO/TS 17263-2003 |
自动车辆和设备识别.货物联运.系统参数 |
(Automatic vehicle and equipment identification - Intermodal goods transport - System parameters) |
ISO/TS 17263-2003 |
自动车辆和设备识别.货物联运.系统参数 |
|
ISO/TS 17450-2-2002 |
产品几何量技术规范(GPS).一般概念.第2部分:基本原则、规范、操作者和不确定度 |
Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators and uncertainties |
ISO/TS 17477-2003 |
使用2维移动光学型激光器的焊接和切割用CO2激光束机器的验收试验 |
(Acceptance tests for CO-laser beam machines for welding and cutting using 2D moving optics type) |
ISO/TS 17477-2003 |
使用2维移动光学型激光器的焊接和切割用CO2激光束机器的验收试验 |
|
ISO/TS 17574-2004 |
道路运输和交通量.电子收费(EFC).EFC安全防护轮廓指南 |
|
ISO/TS 17576-2004 |
牙科学.汞齐合金的腐蚀试验 |
|
ISO/TS 17764-1-2002 |
动物饲料.脂肪酸含量的测定.第1部分:甲酯的制备 |
Animal feeding stuffs - Determination of the content of fatty acids - Part 1: Preparation of methyl esters |
ISO/TS 17764-2-2002 |
动物饲料.脂肪酸含量的测定.第2部分:气相色谱法 |
Animal feeding stuffs - Determination of the content of fatty acids - Part 2: Gas chromatographic method |
ISO/TS 17845-2004 |
焊接及相关工艺.缺陷的名称与符号系统 |
|
ISO/TS 17892-1-2004 |
土工勘查和检验.土壤的实验室检验.第1部分:水含量的测定 |
|
ISO/TS 17892-10-2004 |
土工勘查和检验.土壤的实验室检验.第10部分:直接剪切试验 |
|
ISO/TS 17892-11-2004 |
土工勘查和检验.土壤的实验室检验.第11部分:用恒定水头和降水头测定渗透性 |
|
ISO/TS 17892-12-2004 |
土工勘查和检验.土壤的实验室检验.第12部分:阿特伯格极限塑限的测定 |
|
ISO/TS 17892-2-2004 |
土工勘查和检验.土壤的实验室检验.第2部分:细粒土壤密度的测定 |
|
ISO/TS 17892-3-2004 |
土工勘查和检验.土壤的实验室检验.第3部分:颗粒密度的测定.比重瓶测定比重法 |
|
ISO/TS 17892-4-2004 |
土工勘查和检验.土壤的实验室检验.第4部分:粒径分布的测定 |
|
ISO/TS 17892-5-2004 |
土工勘查和检验.土壤的实验室检验.第5部分:递增载荷土样测试计试验 |
|
ISO/TS 17892-6-2004 |
土工勘查和检验.土壤的实验室检验.第6部分:落锥体试验 |
|
ISO/TS 17892-7-2004 |
土工勘查和检验.土壤的实验室检验.第7部分:细粒土壤的无侧限压缩试验 |
|
ISO/TS 17892-8-2004 |
土工勘查和检验.土壤的实验室检验.第8部分:未固结的不排水三轴试验 |
|
ISO/TS 17892-9-2004 |
土工勘查和检验.土壤的实验室检验.第9部分:饱水土壤的三轴压缩试验 |
|
ISO/TS 18308-2004 |
医疗信息学.电子病历体系结构要求 |
|
ISO/TS 18835-2004 |
吸入麻醉系统.蒸馏汽化器及相关设备 |
|
ISO/TS 18876-1-2003 |
工业自动化系统和集成.交换、评估和共享用工业数据的集成.第1部分:体系结构概观和描述 |
(Industrial automation systems and integration - Integration of industrial data for exchange, access and sharing - Part 1: Architecture overview and description) |
ISO/TS 18876-1-2003 |
工业自动化系统和集成.交换、评估和共享用工业数据的集成.第1部分:体系结构概观和描述 |
|
ISO/TS 18876-2-2003 |
工业自动化系统和集成.交换、评估和共享用工业数据的集成.第2部分:集成和绘图方法 |
(Industrial automation systems and integration - Integration of industrial data for exchange, access and sharing - Part 2: Integration and mapping methodology) |
ISO/TS 18876-2-2003 |
工业自动化系统和集成.交换、评估和共享用工业数据的集成.第2部分:集成和绘图方法 |
|
ISO/TS 19706-2004 |
火灾对人类威协的评定指南 |
|
ISO/TS 19979-2004 |
眼科光学.接触镜片.由多位患者试用的接触镜片的卫生管理 |
|
ISO/TS 20119-2002 |
道路车辆.中心管理量化的试验方法.直线驱动离差矩阵的测定 |
Road vehicles - Test methods for the quantification of on-centre handling - Determination of dispersion metrics for straight-line driving |
ISO/TS 20225-2001 |
管理数据交换用全球医疗装置术语 |
(Global medical device nomenclature for the purpose of regulatory data exchange) |
ISO/TS 20625-2002 |
行政、商业和运输业的电子数据交换.在推行行政、商业和运输业的电子数据交换导则的基础上 XML 图解文件(XSD |
(Electronic data interchange for administration, commerce and transport (EDIFACT) - Rules for generation of XML scheme files (XSD) on the basis of EDI(FACT) implementation guidelines) |
ISO/TS 20646-1-2004 |
改进局部肌肉负载的人体工效学过程.第1部分:减少局部肌肉负载的指南 |
|
ISO/TS 20825-2003 |
道路车辆.拉杆连接件、拉杆眼、转盘主销、钩连接件和环形眼.使用中的机械连接件的磨损极限值 |
(Road vehicles - Drawbar couplings, drawbar eyes, fifth wheel kingpins, hook couplings and toroidal eyes - Wear limits for in-use mechanical couplings ) |
ISO/TS 20825-2003 |
道路车辆.拉杆连接件、拉杆眼、转盘主销、钩连接件和环形眼.使用中的机械连接件的磨损极限值 |
|
ISO/TS 20885-2003 |
气态介质灭火设备.火灾试验区域范围规程.设计的和预先设计的消防设备 |
(Gaseous media fire-extinguishing systems - Area coverage fire test procedure - Engineered and pre-engineered extinguishing units) |
ISO/TS 20885-2003 |
气态介质灭火设备.火灾试验区域范围规程.设计的和预先设计的消防设备 |
|
ISO/TS 21609-2003 |
道路车辆.配件市场射频传输设备安装用EMC指南 |
(Road vehicles - EMC guidelines for installation of aftermarket radio frequency transmitting equipment) |
ISO/TS 21609-2003 |
道路车辆.配件市场射频传输设备安装用EMC指南 |
|
ISO/TS 21667-2004 |
健康信息学.健康指示器概念框架 |
|
ISO/TS 21748-2004 |
测量不确定估计的重复性、再现性和真实评估值的使用的指南 |
|
ISO/TS 21849-2003 |
飞行器.集成数据加工材料管理.条形码 |
(Aircraft - Integrated data processing materials management - Bar coding) |
ISO/TS 21849-2003 |
飞行器.集成数据加工材料管理.条形码 |
|
ISO/TS 22559-1-2004 |
提升机(电梯)的安全要求.第1部分:全球基础安全要求(GESRs) |
|
ISO/TS 22763-2002 |
农作物保护设备.喷射装置.田间农作物喷射器示范轨道 |
(Crop protection equipment -Sprayers - Demonstration track for field crop sprayers) |
ISO/TS 23081-1-2004 |
信息和文献.记录管理过程.记录用数据.第1部分:原则 |
|