标准号 |
中文名称 |
英文名称 |
| ISO 2017-1982 |
振动和冲击.隔振器特性规定的方法 |
Vibration and shock; Isolators; Procedure for specifying characteristics |
| ISO 2020-1-1997 |
航空航天.飞机控制装置的预成形可弯曲钢丝绳.第1部分:尺寸和负载能力 |
Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 1: Dimensions and loads |
| ISO 2020-2-1997 |
航空航天.飞机控制装置的预成形可弯曲钢丝绳.第2部分:技术规范 |
Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 2: Technical specification |
| ISO 20200-2004 |
塑料.在实验室试验中模拟堆肥处理条件下测定塑料的分解度 |
|
| ISO 20200-2004 |
塑料.在实验室试验中模拟堆肥处理条件下测定塑料的分解度 |
|
| ISO 20200-2004 |
塑料.在实验室试验中模拟堆肥处理条件下测定塑料的分解度 |
|
| ISO 20202-2004 |
铝生产用碳质材料.冷和微热捣实材料.烘烤试样的制备和烘烤时损失的测定 |
|
| ISO 2023 Technical Corrigendum 1-2001 |
橡胶鞋靴.有衬里的工业硫化橡胶靴.规范.技术勘误1 |
Rubber footwear - Lined industrial vulcanized-rubber boots - Specification; Technical Corrigendum 1 |
| ISO 2023-1994 |
橡胶鞋靴.业用的有衬里硫化橡胶长靴 |
Rubber footwear - Lined industrial vulcanized-rubber boots - Specifications |
| ISO 2024-1981 |
有衬里的导电橡胶套鞋.规范 |
Rubber footwear, lined conducting; Specification |
| ISO 2025-1972 |
通用一般有衬里的耐油工业橡胶长靴 |
Lined industrial rubber boots with general purpose oil resistance |
| ISO 2026-1974 |
飞机.发动机空气起动连接装置 |
Aircraft; Connections for starting engines by air |
| ISO 2027-1990 |
天然胶乳的蒸发浓缩和防老化.规范 |
Natural rubber latex concentrate, evaporated, preserved; specification |
| ISO 2028-1999 |
合成橡胶胶乳.干聚合物的制备 |
Synthetic rubber latex - Preparation of dry polymer |
| ISO 2030-1990 |
粒状软木.用机械筛分法的粒度分析 |
Granulated cork; size analysis by mechanical sieving |
| ISO 2031-1991 |
碎粒软木塞.体积密度的测定 |
Granulated cork; determination of bulk density |
| ISO 2032-1973 |
飞机的耐热设备金属丝 |
Heat-resisting equipment wires for aircraft |
| ISO 2033-1983 |
信息处理.机读字符的编码(MICR和OCR) |
Information processing; Coding of machine readable characters (MICR and OCR) |
| ISO 20340-2003 |
色漆和清漆.用于近海建筑及相关结构的保护性涂料系统的性能要求 |
(Paints and varnishes - Performance requirements for protective paint systems for offshore and related structures) |
| ISO 20340-2003 |
色漆和清漆.用于近海建筑及相关结构的保护性涂料系统的性能要求 |
|
| ISO 20341-2003 |
表面化学分析.次级离子质谱法.多δ层标准材料深度溶解参数的估算方法 |
(Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials) |
| ISO 20341-2003 |
表面化学分析.次级离子质谱法.多δ层标准材料深度溶解参数的估算方法 |
|
| ISO 20344-2004 |
个人保护设备.鞋靴的试验方法 |
|
| ISO 20345-2004 |
个人保护设备.安全鞋靴 |
|
| ISO 20346-2004 |
个人保护设备.防护鞋靴 |
|
| ISO 20347-2004 |
个人保护设备.职业鞋靴 |
|
| ISO 2035-1974 |
压力管用有弹性密封圈型接头的未增塑聚氯乙烯(PVC)模塑配件.耐压试验 |
Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure; Pressure-resistance test |
| ISO 2036-1976 |
木地板用木材.材种标号 |
Wood for manufacture of wood flooring; Symbols for marking according to species |
| ISO 2037-1992 |
工业用不锈钢管 |
Stainless steel tubes for the industry |
| ISO 2039-1-2001 |
塑料.硬度测定.第1部分:压球法 |
Plastics - Determination of hardness - Part 1: Ball indentation method |
| ISO 2039-2-1987 |
塑料.硬度的测定.第2部分:洛氏硬度 |
Plastics; Determination of hardness; Part 2 : Rockwell hardness |
| ISO 204-1997 |
金属材料.拉力试验中的连续单轴蠕变.试验方法 |
Metallic materials - Uninterrupted uniaxial creep testing in tension - Method of test |
| ISO 2040-1972 |
色漆用铬酸锶颜料 |
Strontium chromate pigments for paints |
| ISO 2041-1990 |
振动和冲击.词汇 |
Vibration and shock; vocabulary |
| ISO 2042-1973 |
飞机电路图 |
Aircraft electrical circuit diagrams |
| ISO 2044-1974 |
压力管用注塑溶剂粘接的未增塑聚氯乙烯(PVC)套接口配件.管内液压试验 |
Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe; Hydraulic internal pressure test |
| ISO 2044-1974 |
压力管用注塑溶剂粘接的未增塑聚氯乙烯(PVC)套接口配件.管内液压试验 |
Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe; Hydraulic internal pressure test |
| ISO 2045-1988 |
有弹性密封环型连接的非增塑聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C)压力管的单头接口.最小接合深度 |
Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints; minimum depths of engagement |
| ISO 2046-1973 |
飞机上呼吸用气态氧的供应 |
Gaseous breathing oxygen supplies for aircraft |
| ISO 2047-1975 |
信息处理.7位编码字符集的控制字符的图形表示法 |
Information processing; Graphical representations for the control characters of the 7- bit coded character set |
| ISO 2048-1990 |
有弹性密封圈型接头的未增塑聚氯乙烯(PVC)压力管的双头套接口.最小接合深度 |
Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints; minimum depths of engagement |
| ISO 20482-2003 |
金属材料.薄板材和带材.埃里克森杯突试验 |
(Metallic materials - Sheet and strip - Erichsen cupping test) |
| ISO 20482-2003 |
金属材料.薄板材和带材.埃里克森杯突试验 |
|
| ISO 2049-1996 |
石油产品.颜色的测定(ASTM尺度) |
Petroleum products - Determination of colour (ASTM scale) |
| ISO 2050-1976 |
工业用氯化钾.钾含量的测定.火焰发射分光光度法 |
Potassium chloride for industrial use; Determination of potassium content; Flame emission spectrophotometric method |
| ISO 20501-2003 |
细陶瓷(高级陶瓷、高级工业陶瓷).强度数据的维伯统计 |
(Fine ceramics (advanced ceramics, advanced technical ceramics) - Weibull statistics for strength data ) |
| ISO 20501-2003 |
细陶瓷(高级陶瓷、高级工业陶瓷).强度数据的维伯统计 |
|
| ISO 20507-2003 |
细陶瓷(高级陶瓷、高级工业陶瓷).词汇 |
(Fine ceramics (advanced ceramics, advanced technical ceramics) - Vocabulary ) |
| ISO 20507-2003 |
细陶瓷(高级陶瓷、高级工业陶瓷).词汇 |
|
| ISO 20508-2003 |
细陶瓷(高级陶瓷、高级工业陶瓷).有透明衬底的陶瓷膜的透光系数的测定 |
(Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of light transmittance of ceramic films with transparent substrate ) |
| ISO 20508-2003 |
细陶瓷(高级陶瓷、高级工业陶瓷).有透明衬底的陶瓷膜的透光系数的测定 |
|
| ISO 20509-2003 |
细陶瓷(高级陶瓷、高级工业陶瓷).非氧化块体陶瓷的抗氧化性测定 |
(Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of oxidation resistance of non-oxide monolithic ceramics ) |
| ISO 20509-2003 |
细陶瓷(高级陶瓷、高级工业陶瓷).非氧化块体陶瓷的抗氧化性测定 |
|
| ISO 2051-1976 |
工业用氯化钾.钾含量的测定.四苯硼酸钾重量法 |
Potassium chloride for industrial use; Determination of potassium content; Potassium tetraphenylborate gravimetric method |
| ISO 2052-1976 |
工业用氯化钾.钾含量的测定.四苯硼酸钠滴定法 |
Potassium chloride for industrial use; Determination of potassium content; Sodium tetraphenylborate titrimetric method |
| ISO 2053-1976 |
工业用氯化钾.水含量的测定.重量法 |
Potassium chloride for industrial use; Determination of moisture content; Gravimetric method |
| ISO 20562-2004 |
轮胎气门.ISO心室1、2和3号 |
|
| ISO 2057-1981 |
农业拖拉机.拖挂农具的遥控液压缸 |
Agricultural tractors; Remote control hydraulic cylinders for trailed implements |
| ISO 2060-1994 |
纺织品.筒子纱.线密度(单位长度的质量)的测定.绞纱法 |
Textiles - Yarn from packages - Determination of linear density (mass per unit length) by the skein method |
| ISO 2061-1995 |
纺织品.纱线捻度的测定.直接计数法 |
Textiles - Determination of twist in yarn - Direct counting method |
| ISO 20623-2003 |
石油及相关产品.用4球法测定流体的极限压力和耐磨性(欧洲条件) |
|
| ISO 2063-1991 |
金属涂层和其它无机物涂层.热喷镀.锌、铝、及其合金 |
Metallic and other inorganic coatings; thermal spraying; zinc, aluminium and their alloys |
| ISO 2064-1996 |
金属镀层和其它无机物涂层.有关厚度测量的定义和协定 |
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness |
| ISO 20645-2004 |
纺织物.抗菌活性的测定.琼脂扩散板试验 |
|
| ISO 2066-1986 |
纯粘结膨胀软木.含水量的测定 |
Expanded pure agglomerated cork; Determination of moisture content |
| ISO 2066-2004 |
弹性地板覆盖物.集块合成软木含水量的测定 |
|
| ISO 2067-1998 |
粒状软木.取样 |
Granulated cork - Sampling |
| ISO 2068-1972 |
色漆用铬酸钡颜料 |
Barium chromate pigments for paints |
| ISO 20683-2-2004 |
航空地面设备.带前起落架的无牵引杆的牵引车辆(TLTV)的设计、试验和维护.第2部分:区域性飞行器 |
|
| ISO 2069-1976 |
金属铝生产用氧化铝.钙含量的测定.火焰原子吸收法 |
Aluminium oxide primarily used for the production of aluminium; Determination of calcium content; Flame atomic absorption method |
| ISO 2070-1997 |
金属铝生产用原生氧化铝.钙含量的测定. |
Aluminium oxide primarily used for the production of aluminium - Determination of calcium content |
| ISO 2071-1976 |
金属铝生产用氧化铝.锌含量的测定.火焰原子吸收法 |
Aluminium oxide primarily used for the production of aluminium; Determination of zinc content; Flame atomic absorption method |
| ISO 2072-1981 |
金属铝生产用氧化铝.锌含量的测定.过氧硝酸乙酰酯(PAN)光度法 |
Aluminium oxide primarily used for the production of aluminium; Determination of zinc content; PAN photometric method |
| ISO 20723-2004 |
结构钢.热轧型材的表面状况.交货要求 |
|
| ISO 20725-2004 |
纺织机械.棉纺用集棉器.词汇和建造原则 |
|
| ISO 20725-2004 |
纺织机械.棉纺用集棉器.词汇和建造原则 |
|
| ISO 20726-2004 |
纺织机械.棉纺用棉箱给棉机.词汇和建造原则 |
|
| ISO 20726-2004 |
纺织机械.棉纺用棉箱给棉机.词汇和建造原则 |
|
| ISO 20727-2004 |
纺织机械.棉纺用混合开包机.词汇和建造原则 |
|
| ISO 20727-2004 |
纺织机械.棉纺用混合开包机.词汇和建造原则 |
|
| ISO 2073-1976 |
金属铝生产用氧化铝.分析用溶液的制备.加压下的盐酸反应法 |
Aluminium oxide primarily used for the production of aluminium; Preparation of solution for analysis; Method by hydrochloric acid attack under pressure |
| ISO 2074-1972 |
胶合板.词汇.两种语言版 |
Plywood; Vocabulary Bilingual edition |
| ISO 2075-1972 |
绳索和绳索制品.剪裁率的测定 |
Ropes and cordage; Cutting netting to shape; Determination of the cutting rate |
| ISO 2076-1999 |
纺织品.人造纤维.属名 |
Textiles - Man-made fibres - Generic names |
| ISO 20763-2004 |
石油和相关产品.液压液耐磨性的测定.叶轮泵法 |
|
| ISO 20764-2003 |
石油和相关产品.水量测定用高沸点流体试验区的准备.氮净化法 |
(Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method) |
| ISO 20764-2003 |
石油和相关产品.水量测定用高沸点流体试验区的准备.氮净化法 |
|
| ISO 2077-1979 |
纯膨胀软木板.弯曲断裂模数的测定 |
Pure expanded corkboard; Determination of the modulus of rupture by bending |
| ISO 2078-1993 |
纺织玻璃纤维.纱线.名称与符号 |
Textile glass; yarns; designation |
| ISO 20783-1-2003 |
石油及相关产品.测定抗火液体的乳剂稳定性.第1部分:HFAE类液体 |
|
| ISO 20783-2-2003 |
石油及相关产品.测定抗火液体的乳剂稳定性.第2部分:HFB类液体 |
|
| ISO 2079-1981 |
表面处理和金属镀层.术语的一般分类 |
Surface treatment and metallic coatings; General classification of terms Trilingual edition |
| ISO 2080-1981 |
电镀和有关工艺.词汇 |
Electroplating and related processes; Vocabulary Trilingual edition |
| ISO 20806-2004 |
机械振动.中型和大型转子的现场平衡的标准和防护装置 |
|
| ISO 20807-2004 |
无损检验.无损检验有限应用人员的资格鉴定 |
|
| ISO 20807-2004 |
无损检验.无损检验有限应用人员的资格鉴定 |
|
| ISO 20808-2004 |
精细陶瓷(高级陶瓷、高级工业陶瓷).用球盘法测定块体陶瓷的摩擦和磨损特性 |
|
| ISO 2081-1986 |
金属镀层.铁或钢的锌电镀层 |
Metallic coatings; Electroplated coatings of zinc on iron or steel |
| ISO 2082-1986 |
金属镀层.铁或钢的镉电镀层 |
Metallic coatings; Electroplated coatings of cadmium on iron or steel |
| ISO 20823-2003 |
石油及相关产品.与热表面接触时液体易燃性的测定.歧管点火试验 |
(Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test) |
| ISO 20823-2003 |
石油及相关产品.与热表面接触时液体易燃性的测定.歧管点火试验 |
|
| ISO 20843-2003 |
石油和相关产品.HFAE、HFAS和HFC类别中抗燃液压油pH值的测定 |
(Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC) |
| ISO 20843-2003 |
石油和相关产品.HFAE、HFAS和HFC类别中抗燃液压油pH值的测定 |
|
| ISO 20844-2004 |
石油和相关产品.用柴油喷射器喷嘴测定含高聚物油的剪切稳定性 |
|
| ISO 20846-2004 |
石油制品.机动车燃料的硫含量的测定.紫外线荧光法 |
|
| ISO 2085-1976 |
铝及其合金的阳极氧化.阳极氧化物薄镀层的连续性检验.硫酸铜试验 |
Anodizing of aluminium and its alloys; Check of continuity of thin anodic oxide coatings; Copper sulphate test |
| ISO 20865-2002 |
鞋类.外底的试验方法.压缩能 |
Footwear - Test methods for outsoles - Compression energy |
| ISO 20866-2001 |
鞋靴.内底试验方法.耐脱层性 |
Footwear - Test methods for insoles - Delamination resistance |
| ISO 20867-2001 |
鞋靴.内底试验方法.鞋跟钉抓强度 |
Footwear - Test methods for insoles - Heel pin holding strength |
| ISO 20868-2001 |
鞋靴.内底试验方法.抗磨性 |
Footwear - Test methods for insoles - Abrasion resistance |
| ISO 20869-2001 |
鞋靴.外底、内底、衬里和内袜的试验方法.水溶量 |
Footwear - Test methods for outsoles, insoles, lining and insocks - Water soluble content |
| ISO 20870-2001 |
鞋靴.老化调节 |
Footwear - Ageing conditionning |
| ISO 20871-2001 |
鞋靴.外底试验方法.抗腐蚀性 |
Footwear - Test methods for outsoles - Abrasion resistance |
| ISO 20872-2001 |
鞋靴.外底试验方法.抗扯裂强度 |
Footwear - Test methods for outsoles - Tear strengh |
| ISO 20873-2001 |
鞋靴.外底试验方法.尺寸稳定性 |
Footwear - Test methods for outsoles - Dimensional stability |
| ISO 20874-2001 |
鞋靴.外底试验方法.针的耐折强度 |
Footwear - Test methods for outsoles - Needle tear strength |
| ISO 20875-2001 |
鞋靴.外底试验方法.耐开裂强度和耐脱层的测定 |
Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance |
| ISO 20876-2001 |
鞋靴.外底试验方法.耐缝合处撕裂性 |
Footwear - Test methods for outsoles - Resistance to stitch tear |
| ISO 20877-2001 |
鞋靴.完整鞋试验方法.隔热 |
Footwear - Test methods for whole shoe - Thermal insulation |
| ISO 20884-2004 |
石油制品.机动车燃料的硫含量的测定.波长色散X射线荧光光谱法 |
|
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com