标准号 |
中文名称 |
英文名称 |
| ISO 11265-1994 |
土壤.电导性比率的测定 |
(Soil quality - Determination of the specific electrical conductivity) |
| ISO 11266-1994 |
土壤质量.需氧条件下的土壤中生物分解实验室试验指南 |
(Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions) |
| ISO 11267-1999 |
土壤质量.由于土壤污染造成的弹尾目真菌的复制的抑制 |
(Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants) |
| ISO 11268-1-1993 |
土质.蚯蚓(恶臭蚯蚓)上有害污物的作用.第1部分:使用人造土壤酶作用物时测定急性毒力的方法 |
(Soil quality; effects of pollutants on earthworms (Eisenia fetida); part 1: determination of acute toxicity using artificial soil substrate) |
| ISO 11268-2-1998 |
土壤质量.利用蚯蚓测定污染物对土壤的影响.第2部分:蚯蚓繁殖对土质影响的测定 |
(Soil quality - Effects of pollutants on earthworms (Eisenia fetida) - Part 2: Determination of effects on reproduction) |
| ISO 11268-3-1999 |
土壤质量.污染对蚯蚓的影响.第3部分:土壤情况影响测定指南 |
(Soil quality - Effects of pollutants on earthworms - Part 3: Guidance on determination of effects in field situations) |
| ISO 11269-1-1993 |
土质.测定土壤植物丛上有害污物的作用.第1部分:根生长抑制测量的方法 |
(Soil quality; determination of the effects of pollutants on soil flora; part 1: method for the measurement of inhibition of root growth) |
| ISO 11269-2-1995 |
土壤质量.土壤植物群污染效力的测定.高级植物增长和外部突出物上的化学药品的效力 |
(Soil quality - Determination of the effects of pollutants on soil flora - Part 2: Effects of chemicals on the emergence and growth of higher plants) |
| ISO 1127-1992 |
不锈钢管.尺寸、公差和单位长度的规范质量 |
(Stainless steel tubes; dimensions, tolerances and conventional masses per unit length) |
| ISO 11271-2002 |
土壤质量.氧化还原电势的测定.现场试验 |
(Soil quality - Determination of redox potential - Field method) |
| ISO 11272-1998 |
土壤质量.干散密度的测定 |
(Soil quality - Determination of dry bulk density) |
| ISO 11274-1998 |
土壤质量.水分保持特性的测定.实验室法 |
(Soil quality - Determination of the water-retention characteristic - Laboratory methods) |
| ISO 11275-2004 |
土质.不饱和液体渗导性和水保持特性的测定.风蒸发法 |
|
| ISO 11276-1995 |
土质.孔隙水压力的测定.土壤湿度计法 |
(Soil quality - Determination of pore water pressure - Tensiometer method) |
| ISO 11277 Technical Corrigendum 1-2002 |
土壤质量.矿质土壤材料颗粒尺寸分布测定.筛分法和沉淀法.技术勘误1 |
(Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation; Technical Corrigendum 1) |
| ISO 11277-1998 |
土壤质量.矿质土壤材料粒度分布的测定.筛分法和沉淀法 |
(Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation) |
| ISO 11285-2004 |
牛奶.乳糖含量的测定.酶催化方法 |
|
| ISO 11286-1997 |
茶.粒度分析法进行等级分类 |
(Tea - Classification of grades by particle size analysis) |
| ISO 11286-2004 |
茶叶.用粒度分析法进行等级分类 |
|
| ISO 11289-1993 |
密封容器中的加热食物.pH值的测定 |
(Heat-processed foods in hermetically sealed containers; determination of pH) |
| ISO 1129-1980 |
锅炉、过热器和热交换器用钢管材.尺寸、公差和常规单位长度的重量 |
(Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length) |
| ISO 11290-1 AMD 1-2004 |
食品和动物饲料的微生物学.单核细胞增生性利斯特氏菌检测和计数的水平方法.第1部分:检测方法.修改件1:隔离介质和溶血试验以及包括精确数据的修改 |
|
| ISO 11290-1-1996 |
食品和动物饲料的微生物分析法.单核细胞增多性利斯特菌的计算和横向检测法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Listeria monocytogenes - Part 1: Detection method) |
| ISO 11290-2 AMD 1-2004 |
食品和动物饲料的微生物学.单核细胞增生性利斯特氏菌检测和计数的水平方法.第2部分:计数方法.修改件1:计数介质的修改 |
|
| ISO 11290-2-1998 |
食品和动物饲料的微生物分析法.单核细胞增多性利斯特菌的计算和横向检测法.第1部分:检测法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 2: Enumeration method) |
| ISO 11294-1994 |
烘烤后的磨碎的咖啡.水分含量的测定.103度重量损失的方法 |
(Roasted ground coffee - Determination of moisture content - Method by determination of loss in mass at 103 鳦 (Routine method)) |
| ISO 113-1999 |
滚动轴承.止推轴承座.外形尺寸 |
(Rolling bearings - Plummer block housings - Boundary dimensions) |
| ISO 1130-1975 |
纺织纤维.试验用的几种取样方法 |
(Textile fibres; Some methods of sampling for testing) |
| ISO 11303-2002 |
金属和合金的腐蚀.防大气腐蚀方法的选择指南 |
(Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion) |
| ISO 11306-1998 |
金属和合金的腐蚀.暴露在海水表面的金属和合金的评定导则 |
(Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water) |
| ISO 11312-2000 |
摄影技术.预压加工感光材料片.尺寸和相应要求 |
(Photography - Sheets of sensitized materials for the pre-press industry - Dimensions and related requirements) |
| ISO 11314-1995 |
摄影.电影放映机.成象尺度/放映距离的计算 |
(Photography - Projectors - Image size/projection distance calculations) |
| ISO 11315-1-1997 |
摄影.室内投影.第1部分:幻灯机的投影屏照明试验 |
(Photography - Projection in indoor rooms - Part 1: Screen illumination test for still projectors) |
| ISO 11315-2-1997 |
摄影.室内投影.第2部分:幻灯投影和视频投影的投影屏照明试验 |
(Photography - Projection in indoor rooms - Part 2: Screen luminance test for still and video projection) |
| ISO 11315-3-1999 |
摄影.室内投影机.第3部分:透射投影屏的分类和其透射光亮度水平的测定 |
(Photography - Projection in indoor rooms - Part 3: Classification of transmitting projection screens and measurement of their transmitted luminance levels) |
| ISO 11316-1999 |
摄影术.静态图片的投影.图像特性评价的测量方法 |
(Photography - Projection of still pictures - Measuring methods for the evaluation of imaging properties) |
| ISO 11318-2002 |
心脏除颤器.可植入体内的心脏除颤器联结器系统DF-1.尺寸和试验要求 |
(Cardiac defibrillators - Connector assembly DF-1 for implantable defibrillators - Dimensional and test requirements) |
| ISO 1132-1-2000 |
滚动轴承.公差.第1部分:术语和定义 |
(Rolling bearings - Tolerances - Part 1: Terms and definitions) |
| ISO 1132-2-2001 |
滚动轴承.公差.第2部分:测量和校验原理和方法 |
(Rolling bearings - Tolerances - Part 2: Measuring and gauging principles and methods) |
| ISO 11323-2002 |
铁矿石和直接轧制铁.词汇 |
(Iron ore and direct reduced iron - Vocabulary) |
| ISO 11329-2001 |
液体比重测定.感潮航道中悬浮泥砂迁移的测量 |
(Hydrometric determinations - Measurement of suspended sediment transport in tidal channels) |
| ISO 1133-1997 |
塑料.热塑塑料熔体质量流速(MFR)和熔体体积流速(MVR)的测定 |
(Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics) |
| ISO 11334-1-1994 |
用胳膊操作的助步器的要求和试验方法.第1部分:肘支撑器 |
(Walking aids manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches) |
| ISO 11334-4-1999 |
用一只胳膊操作的助步器的要求和试验方法. 第4部分:具有多于三条腿支撑的步行器扶杖 |
(Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs) |
| ISO 11337-2004 |
塑料.聚酰胺.气相色谱法测定ε-己内酰胺和ω-月桂酰 |
|
| ISO 11338-1-2003 |
固定源排放.气相和粒相多环芳香烃的测定.第1部分:取样 |
(Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling) |
| ISO 11338-1-2003 |
固定源排放.气相和粒相多环芳香烃的测定.第1部分:取样 |
|
| ISO 11338-2-2003 |
固定源排放.气相和粒相多环芳香烃的测定.第2部分:样品制备、清洁和测定 |
(Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 2: Sample preparation, clean-up and determination) |
| ISO 11338-2-2003 |
固定源排放.气相和粒相多环芳香烃的测定.第2部分:样品制备、清洁和测定 |
|
| ISO 11339-2003 |
粘合剂.挠性粘合组件的T-剥离试验 |
(Adhesives - T-peel test for flexible-to-flexible bonded assemblies ) |
| ISO 11339-2003 |
粘合剂.挠性粘合组件的T-剥离试验 |
|
| ISO 11339-2003 |
粘合剂.挠性粘合组件的T-剥离试验 |
|
| ISO 1134-1993 |
梨.冷藏 |
(Pears; cold storage) |
| ISO 11341-1994 |
色漆和清漆.人工风化及人工辐射照.滤子化的氙弧辐射照 |
(Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation) |
| ISO 11341-2004 |
色漆和清漆.模拟气候及模拟辐射曝晒.氙弧灯曝晒 |
|
| ISO 11342 Technical Corrigendum 1-2000 |
机械振动.挠性转子的机械平衡方法和标准.技术勘误1 |
(Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors; Technical Corrigendum 1) |
| ISO 11342-1998 |
机械振动.挠性转子的机械平衡方法和标准 |
(Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors) |
| ISO 11343-2003 |
粘合剂.在冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法 |
(Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method ) |
| ISO 11343-2003 |
粘合剂.在冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法 |
|
| ISO 11343-2003 |
粘合剂.在冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法 |
|
| ISO 11344-2004 |
合成生橡胶.用凝胶渗透色谱法测定溶液聚合物分子质量的分布 |
|
| ISO 11345-1997 |
橡胶.碳黑分散的评估.快速比较法 |
(Rubber - Assessment of carbon black dispersion - Rapid comparative methods) |
| ISO 11346-1997 |
硫化橡胶或热塑性橡胶.使用阿伦纽斯曲线进行寿命和最高温度-评定 |
(Rubber, vulcanized or thermoplastic - Estimation of life-time and maximum temperature of use from an Arrhenius plot) |
| ISO 11346-2004 |
硫化或热塑性橡胶.使用寿命和最高温度的估计 |
|
| ISO 11346-2004 |
硫化或热塑性橡胶.使用寿命和最高温度的估计 |
|
| ISO 11346-2004 |
硫化或热塑性橡胶.使用寿命和最高温度的估计 |
|
| ISO 11348-1-1998 |
水质.有关光发射水样品的抑制效果的测定(发光细菌试验).第1部分:使用新制备细菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria) |
| ISO 11348-2-1998 |
水质.有关光发射水样品的抑制效果的测定(发光细菌试验).第2部分:使用液体干细菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria) |
| ISO 11348-3-1998 |
水质.有关光发射水样品的抑制效果的测定(发光细菌试验).第2部分:使用冻干细菌法 |
(Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria) |
| ISO 1135-1-1987 |
医用输液设备.第1部分:玻璃输液瓶,塞和塞帽 |
(Transfusion equipment for medical use; Part 1 : Glass transfusion bottles, closures and caps) |
| ISO 1135-3-1986 |
医用输液设备.第3部分:取血器具 |
(Transfusion equipment for medical use; Part 3 : Blood-taking set) |
| ISO 1135-4-1998 |
医用输血器具.第4部分:一次性使用输血器 |
(Transfusion equipment for medical use - Part 4: Transfusion sets for single use) |
| ISO 1135-4-2004 |
医用输血器具 第4部分:一次性使用输血器 |
|
| ISO 11357-1-1997 |
塑料.特定扫描量热法(DSC).第1部分:一般原理 |
(Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles) |
| ISO 11357-2-1999 |
塑料.特定扫描量热法(DSC).第2部分:玻璃传导温度的测定 |
(Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature) |
| ISO 11357-3-1999 |
塑料.级差扫描量热术(DSC).第3部分:熔化和结晶焓和温度的测定 |
(Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization) |
| ISO 11357-5-1999 |
塑料.差示扫描量热法(DSC).第5部分:反应温度、时间、焓和转化度特征反应曲线的测定 |
(Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion) |
| ISO 11357-6-2002 |
塑料.差示扫描量热法(DSC).第6部分:氧化传导时间的测定 |
(Plastics - Differential scanning calorimetry (DSC) - Part 6: Determiantion of oxidation induction time) |
| ISO 11357-7-2002 |
塑料.差示扫描量热法(DSC).第7部分:结晶动力的测定 |
(Plastics - Differential scanning calorimetry - (DSC) - Part 7: Determination of crystallization kinetics) |
| ISO 11358-1997 |
塑料.高聚物的热重分析法(TG).一般原理 |
(Plastics - Thermogravimetry (TG) of polymers - General principles) |
| ISO 11359-1-1999 |
塑料.热力学分析(TMA).第1部分:一般原理 |
(Plastics - Thermomechanical analysis (TMA) - Part 1: General principles) |
| ISO 11359-2-1999 |
塑料.热力学分析(TMA).第2部分:线性热膨胀系数和玻璃化转变温度的测定 |
(Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature) |
| ISO 11359-3-2002 |
塑料.热力学分析(TMA).第3部分:渗透温度的测定 |
(Plastics - Thermomechanical analysis (TMA) - Part 3: Determination of penetration temperature) |
| ISO 1136-1976 |
羊毛.纤维平均直径的测定.透气性法 |
(Wool; Determination of mean diameter of fibres; Air permeability method) |
| ISO 11369-1997 |
水质.固体-液体提取后用UV检验液相色谱高功能植物处理剂使用方法的测定 |
(Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction) |
| ISO 11372-1995 |
液化乙炔气瓶.充气时间的检验 |
(Cylinders for dissolved acetylene - Inspection at time of filling) |
| ISO 11374-1993 |
农用拖拉机和机具.四点式刚性联结器规范 |
(Agricultural tractors and implements; four-point rigid hitch; specifications) |
| ISO 11375-1998 |
建筑物用建筑机械和设备.术语和定义 |
(Building construction machinery and equipment - Terms and definitions) |
| ISO 11377-1997 |
铺地织物.地板土.试验位点的确立和对土的估计 |
(Textile floor coverings - Floor soiling - Test site set-up and soiling evaluation) |
| ISO 11378-1-2000 |
织物地板覆盖物.实验室土壤试验.第1部分:卡帕土壤试验 |
(Textile floor coverings - Laboratory soiling tests - Part 1: Kappasoil test) |
| ISO 11378-2-2001 |
纺织地板覆盖物.实验室土壤试验.第2部分:转鼓试验 |
(Textile floor coverings - Laboratory soiling tests - Part 2: Drum test) |
| ISO 11379-1997 |
铺地织物.用雾化抽吸器对实验室清洁的过程 |
(Textile floor coverings - Laboratory cleaning procedure using spray extraction) |
| ISO 1138-1981 |
橡胶配方配合剂.炭黑.硫含量的测定 |
(Rubber compounding ingredients; Carbon black; Determination of sulphur content) |
| ISO 11380-1994 |
光学和光学仪器.眼科光学.镜片样板 |
(Optics and optical instruments - Ophthalmic optics - Formers) |
| ISO 11381-1994 |
光学和光学仪器.眼科光学.螺纹 |
(Optics and optical instruments - Ophthalmic optics - Screw threads) |
| ISO 1139-1973 |
纺织品.纱线的名称和牌号 |
(Textiles; Designation of yarns) |
| ISO 11393-1-1998 |
手持式链锯使用者用防护服装.第1部分:抗链锯切割试验用由飞轮驱动的试验机械 |
(Protective clothing for users of hand-held chain-saws - Part 1: Test rig driven by a flywheel for testing resistance to cutting by a chain-saw) |
| ISO 11393-2-1999 |
手持式链锯使用者用防护服装.第2部分:护腿的性能要求和试验方法 |
(Protective clothing for users of hand-held chain-saws - Part 2: Test methods and performance requirements for leg protectors) |
| ISO 11393-3-1999 |
手持式链锯使用者用防护服装.第3部分:鞋靴的试验方法 |
(Protective clothing for users of hand-held chain-saws - Part 3: Test methods for footwear) |
| ISO 11393-4-2003 |
手持式链锯使用者用防护服装.第4部分:防护手套试验方法和性能要求 |
|
| ISO 11393-5-2001 |
手持式链锯使用者的防护服装.第5部分:防护绑腿的试验方法和性能要求 |
(Protective clothing for users of hand-held chain-saws - Part 5: Test methods and performance requirements for protective gaiters) |
| ISO 11399-1995 |
热环境的人类工效学.相关国际标准的原理和应用 |
(Ergonomics of the thermal environment - Principles and application of relevant international standards) |
| ISO 1140-1990 |
绳索.聚酰胺绳索.规范 |
(Ropes; polyamide; Specification) |
| ISO 1140-2004 |
纤维绳索.聚酰胺绳索.3、4 和8股绞绳 |
|
| ISO 11400-1992 |
镍、镍铁和镍合金.磷含量测定.二氧磷钒钼分子吸收光谱法 |
(Nickel, ferronickel and nickel alloys; determination of phosphorus content; phosphovanadomolybdate molecular absorption spectrometric method) |
| ISO 11401-1993 |
塑料.酚醛树脂.用液相色谱法分离 |
(Plastics; phenolic resins; separation by liquid chromatography) |
| ISO 11402-1993 |
塑料.缩聚树脂.游离甲醛的测定 |
(Plastics; condensation resins; determination of free formaldehyde) |
| ISO 11402-2004 |
酚醛树脂、氨基树脂和缩合树脂.游离甲醛含量的测定 |
|
| ISO 11402-2004 |
酚醛树脂、氨基树脂和缩合树脂.游离甲醛含量的测定 |
|
| ISO 11403-1-2001 |
塑料.可比较多点数据的采集和表示.第1部分:机械性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties) |
| ISO 11403-2-1995 |
塑料.可比较多点数据的采集和表示.第2部分:热处理性能 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties) |
| ISO 11403-3-1999 |
塑料.可比多点数据的采集和表示.第3部分:环境对性能的影响 |
(Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties) |
| ISO 11406-2001 |
商用道路车辆.带尾部连接器的牵引车辆和挂钩挂车间的机械连接器.互换性 |
(Commercial road vehicles - Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers - Interchangeability) |
| ISO 11407-2004 |
商用道路车辆.尾部带向前和向下连接器的牵引车和中轴挂车间的机械连接.互换性 |
|
| ISO 11408-1999 |
化学转化膜覆层.铁和钢上的黑色氧化覆层.规范和试验方法 |
(Chemical conversion coatings - Black oxide coating on iron and steel - Specification and test methods) |
| ISO 11409-1993 |
塑料.酚醛树脂.用差别扫描量热法测定反应热和反应温度 |
(Plastics; phenolic resins; determination of heats and temperatures of reaction by differential scanning calorimetry) |
| ISO 1141-1990 |
绳索.聚酯绳索.规范 |
(Ropes; polyester; Specification) |
| ISO 1141-2004 |
纤维绳索.聚酯绳索.3、4 和8股绞绳 |
|
| ISO 11412-1998 |
铝制品用碳素材料.煅烧焦炭.水含量测定 |
(Carbonaceous materials for the production of aluminium - Calcined coke - Determination of water content) |
| ISO 11413-1996 |
塑料管及其配件.聚乙烯管和电熔配件之间的试验管接头部件的制备 |
(Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting) |
5分钟获取标准报价 咨询电话：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com